Southern Railway - Tamil Nadu

34109740 supply of horizontal open well submersible pumpsupply of horizontal open well submersible pump, horizontal open well submersible pump set to deliver cold clear water, head range covering 22.5 mtrs to 37 mtrs and discharge capacity 2400 lpm to 1200 lpm, suitable to operate on 415v, 50hz, ac, 3 phase supply, conforming to is 14220. required make: deccan / karvel / grundfos / kirloskar / cri / ksb / mbh / psg / texmo / crompton / suguna only. offered make & model shall be explicitly mentioned in the offer. technical brochure has to be attached for technical evaluation along with authorised dealership certificate. test certificate and one year warranty certificate to be submitted along with supply. offers of authorised dealers only be considered. => limited...

Ministry Of Railways - Tamil Nadu

33988037 bids are invited for 7. hp three phase open well submersible pump suitable for operation in 415v three phase 50hz acsup (q3) total quantity : 5...

National Institute Of Technology - Tamil Nadu

33899656 supply and installation of gun sprinkler work and its accessories in football ground at nit trichy , supplying, fixing and commissioning of 75 mm pvc pipe 6 kg as directed by the engineer in charge.. , supplying, fixing and commissioning of 63 mm pvc pipe 6 kg as directed by the engineer in charge. , supply of 1 1/4qcv along with its necessary accessories as directed by the engineer in charge. , supply of 1 1/4 handle for qcv along with its necessary fittings as directed by the engineer in charge. , supply of 1 1/4 gun sprinkler along with its necessary fittings as directed by the engineer in charge. , supply of 10 round valve box along with its necessary fittings as directed by the engineer in charge. , supply of 7 1/4 hp submersible pump along with its necessary fittings as directed by the engineer in charge. , supply of starter for pump along with its necessary fittings as directed by the engineer in charge. , excavating trenches of required width for laying of pipes, cables, etc , labour charges for installation of qcv, handle, gun sprinkler, round valve box, submersible pump, starter etc., complete as directed by engineer in charge....

Southern Railway - Tamil Nadu

33811321 supply of submersible pump controller single phasesubmersible pump controller single phase, submersible pump controller single phase motor hp rating : 1.5 hp, 1.1kw overload relay 8.9 a 13.5 a contactor ( a ) : 20a, start capacitors: 120 micro farad 150 micro farad ( mfd, run capacitors 50 micro farad, as per cat no. ihadoak1fa of havells. make : havells ( or ) crompton greaves ( or ) beston ( or ) bch only....

Department Of Employment And Training - Tamil Nadu

33704226 supply, erection and commissioning of machineries and equipment for various government industrial training institute ( iti ) in tamil nadu 1. split type air conditioner 1.5 ton 17 nos ac 2. bottle cooler visible 1 no 3. car ac tutorial model 2 sets 4. de scaling pump set 1 no 5. deep freezer 1 no 6. evacuating and refrigerant charging station fitted with weighing scale 1 no 7. frost free refrigerator 1 no 8. ice candy plant 1 no 9. refrigerator 365 litre 1 no 10. refrigerator 185 litre 2 nos 11. storage type water cooler ( hot & cold ) 150 liters capacity 1 no 12. two stage rotary vacuum pump ( 3 or 4 cfm ) 2 nos 13. visi cooler185 liter 1 no 14. water cooler storage type 1 no 15. window ac 1 ton 1 no 1. battery charger 4 nos au 2. cut section working model of centrifugal clutch assembly 1 no 3. cut section working model of automatic transmission gear box 1 no 4. cutsection model of mock layout of a motor car electrical system working model. 1 no 5. diesel engine crdi 4 stroke for dismantling and assembling with swivelling stand 1 no 6. diesel engine 4 stroke vertical ( up to about 10 kw ) 1 no 7. diesel engine 6 cylinder in running condition 1 no 8. diesel engine 6 cylinder crdi 4 stroke running condition 1 no 9. drum brake assembly 2 nos 10. front axle ( rzeeppa joint ) with stand for dismantling and assembly. 2 nos 11. hydraulic jack hi lift type 3 ton capacity, and 5 ton capacity each 1 no 5 sets 12. petrol engine ( 2 stroke ) cut section 1 no 13. steering assembly– working model 14. synchronous gearbox with stand for dismantling and assembly. 2 nos 15. trolley type portable air compressor 1 no 16. tyre changer machine 1 no 17. wheel balancing machine 1 no 18. functional / experiment model of different type of sensors. 1 no 1. motor generator ( dc to ac ) set 3 nos e 2. 2kva alternator with 3phase induction motor 1 no 3. ac phase wound slip ring motor with starter switch5 hp, 440 v, 3 phase, 50hz 1 no 4. ac squirrel cage induction motor 5 hp, 3 phase, 400 v with star delta starter 2 nos 5. brake test arrangement with two spring balance 1 no 6. dc compound motor with starter &switch 6 nos 7. dc generators –series, shunt & compound type 1 no 8. dc series motor ( 2.5kw, 220 v ) coupledwith spring balance load 3 nos 9. d.c. shunt generator with control panel2.5kw, 220v 3 nos 10. dc shunt motor 2.5 kw, 220 volts 3 nos 11. diesel generator set 2 nos 12. motor generator ( actodc ) 1 no 13. oil testing kit: 4 nos 14. oscilloscope dual trace 50mhz: 1 no 15. synchronous motor 3 phase, 3 hp, 440 volt, 50 hz, 4 pole, with all panel board accessories 4 nos 16. three phase transformer shell type 6 nos 17. three phase transformer, ( 5kva ) 2 nos 18. data acquisition system ( das ) 1 no 1. inter lock machine 1 no lgm 2. post bed sewing machine 1 no 3. sewing machine power operated ( heavy duty ) 1 no 4. cylinder bed sewing machine 1 no 5. sewing machine industrial type flat bed 2 nos 6. upper leather skiving machine 1 no 1. auto compression moulding machine 1 no plastic 2. automatic extrusion blow moulding machine 1 no 3. hand operated compression moulding machine with moulds 1 no 4. hand operated injection moulding machine 15 grams capacity 5. hand operated injection moulding machine 30 grams capacity 1 no 6. test equipment for plastic mfi 1 no 7. universal testing machine for plastic 1 no 1. 15 hp submersible pump set 8 stage 1 no lm 2. centrifugal pump coupled with mono block set 1 no 3. diesel engine 3.5 kw fitted with pump 1 no 4. circle cutting machine 300 mm 1 no 5. drilling machine bench ( sensitive ) to drill up to 13mm dia along with accessories 21 nos 6. drilling machine pillar0 20mm capacity with swivel table motorized with chuck and key 22 nos 7. guillotine shearing machine foot operated 1 no 8. double ended pedestal grinder 300 mm 4 nos 9. double ended pedestal grinder 250 mm 9 nos 10. power hacksaw machine 16” hydraulic 12 nos 11. seaming machine 1 no 12. slotter with all attachments 8 nos 13. profile projector 1 no 1. ss and sc center lathe ( all geared head stock ) 95 nos hm 2. tool room lathe s.s &s.c. ( all geared type ) 13 nos 3. horizontal milling machine 2 nos 4. universal milling machine 6 nos 5. vertical milling machine 2 nos 6. surface grinding machine ( hydraulic type ) 1 no 7. tool & cutter grinder 5 nos 8. universal cylindrical grinder with center height 130mm ( hydraulic typewheel head movement ) 1 no 9. universal cylindrical grinder with center height 150 mm ( hydraulic typewheel head movement ) 3 nos 1. sewing machine single needle lock stritch industrial model. 43 nos sewing 2. overlock machine 3 thread. 1 no 3. zig zag multipurpose machine. 1 no 4. double needle machine. 3 nos 5. button hole machine. 1 no 6. button sewing machine 2 nos 7. feed off the arm double needle 1 no 1. welding transformer with all accessories ( 400a, ocv60 100v, 60% dutycycle 2. welding transformer with all accessories ( 300a, ocv60 100v, 60% duty cycle ) 14 nos 3. d.c arc welding rectifiers set ( thyristor type ) with all accessories ( 400a. ocv 60 100v, 60%duty cycle ) 15 nos 4. gmaw welding machine 400a capacity ( inverter type ) with air cooled torch, regulator, gas pre heater, gas hose and standard accessories 4 nos 5. ac / dc gtaw welding machine with water cooled torch 300 a, argon regulator, gas hose, water circulating system and standard accessories 7 nos 6. air plasma cutting equipment with air compressor and all accessories. 2 nos 7. spot welding machineto15kva with allaccessories 10 nos 8. portable gas cutting machine...

Ministry Of Railways - Tamil Nadu

33598422 bids are invited for energy efficient minimum 3 star rated 3 phase, hp horizontal type, open well submersible pump set o(q3) total quantity : 5...

Tamil Nadu Cooperative Sugar Federation Limited - Tamil Nadu

33583310 supply of vertical open well submersible pump motor supply of vertical open well submersible pump motor , make : deccan / aquatex ( texmo ) , 25 hp / 18.75 kw, 3 phase 440 vac supply 50 hz vertical open well submersible pump motor complete set head: 33.75 mts, discharge 2200 lpm delivery 100 mm , 15 hp / 11.25 kw, 3 phase 440 vac supply 50 hz vertical 2 stageopen well submersible pump motor complete set head: 22.75 mts, discharge 1200 lpm delivery 75 mm , 10 hp / 7.5 kw, 3 phase 440 vac supply 50 hz vertical 2 stage open well submersible pump motor complete set head: 40 mts, discharge 900 lpm delivery 75 mm...

Indian Rare Earths Limited - Tamil Nadu

33483528 operation / regular maintenance of stp daily sl.no.1 of scope of work operation / regular maintenance of stp daily in two shift basis ( 16 hours / day ) including sundays and all holidays at main plant and housing complex area. 2 2 charges for collection of treated effluent water from the stp and test sl.no.2 of scope of work charges for collection of treated effluent water from the stp and test the same treated water in the recognized lab and submit the test certificate for the treated effluent ( i.e. cod, bod, tss, tds and ph ) at every month. test certificate to be submitted before 15th of next month. 3 3 rate for servicing ksb imported submersible pump sl.no.3 of scope of work rate for servicing as and when required for ksb imported submersible pump including replacement of bearing & oil seal. 4 4 rate for servicing required for kay make air blower sl.no.4 of scope of work rate for servicing as and when required for kay make air blower including replacement of bearing & oil seal. 5 5 rate for servicing required for kirloskar centrifugal pump sl.no.5 of scope of work rate for servicing as and when required for kirloskar centrifugal pump including replacement of bearing & oil seal. 6 6 rate for servicing clarifier sl.no.6 of scope of work rate for servicing as and when required for clarifier including replacement of bearing & oil seal. 7 7 supply and replacement of spares sl.no.7 of scope of work supply and replacement of spares as and when required for ksb imported submersible pumps: rewinding of pump. 8 8 supply and replacement of spares sl.no.8 of scope of work supply and replacement of spares as and when required for ksb imported submersible pumps: capacitor. 9 9 supply and replacement of spares sl.no.9 of scope of work supply and replacement of spares as and when required for ksb imported submersible pumps: auto level switch. 10 10 supply and replacement of spares sl.no.10 of scope of work supply and replacement of spares as and when required for kirloskar centrifugal pump with motor: rewinding of motor. 11 11 supply and replacement of spares sl.no.11 of scope of work supply and replacement of spares as and when required for kirloskar centrifugal pump with motor: gunmetal bush. 12 12 supply and replacement of spares sl.no.12 of scope of work supply and replacement of spares as and when required for kay make ? air blowers with motor : rewinding of motor. 13 13 supply and replacement of spares sl.no.13 of scope of work supply and replacement of spares as and when required for kay make ? air blowers : air filter. 14 14 supply and replacement of spares sl.no.14 of scope of work supply and replacement of spares as and when required for clarifier : rewinding of motor....

Municipal Corporation - Tamil Nadu

33427207 tiruppur corporation_supply installation erection and commissioning of 7.5hp submersible pump for sewage application with star delta starter automating the operation of sewage pumps using programmable logic controller plc and piping arrangements supply installation erection and commissioning of 7.5hp submersible pump for sewage application with star delta starter automating the operation of sewage pumps using programmable logic controller plc and piping arrangements at kavundanaickenpala...

Integral Coach Factory - Tamil Nadu

33322786 supply of supply of vertical open well submersible pump 11.2 kw / 15hp capacity @ 415v 3 phase 50hz along with indoor control panelsupply of vertical open well submersible pump 11.2 kw / 15hp capacity @ 415v 3 phase 50hz along with indoor control panel,supply of vertical open well submersible pump 11.2 kw / 15hp capacity @ 415v 3 phase 50hz along with indoor control panel as per specification enclosed. item not available in gem => limited...

Southern Railway - Tamil Nadu

33317971 supply of 2hp borewell submersible pump set2hp borewell submersible pump set,2hp borewell submersible pump set to deliver water, 15 stage, head range covering 53 mtrs to 65 mtrs and discharge capacity 84 lpm to 54 lpm suitable for 40 mm delivery pipe to operate on 415v, 50 hz, ac 3 phase supply confirming to is:8034 along with automatic dol starter control panel for 2 hp submersible pumpset incorporated in a ms box of suitable size of standard 4 pole contactor, fitted along with current sensing type overload relay, dry run (current sensed) protection and delay timer (upto 900 min) auto power on single phasing & phase reversal preventer. the contactor coil and the protection relay sensing voltage 415v, 50 hz, ac supply. the starter control panel shall have fitting with digital type voltmeter, ammeter, indication lamps for power on, trip, r, y, b phase indication make for submersible pump: kmp, celvin, crompton, mbh, ksb, kirloskar, deccan/karvel, cri only.make for dol starter: techon, powerpro, l&t, c&s, cg.supply should be along with test certificate and guarantee certificate for a period of not less than 12 months. => limited...

Directorate Of Purchase And Stores - Tamil Nadu

33251511 supply of chromium, iron, zirconium, titanium, niobium, nickel, tantalam, aluminium, copper supply ofchromium, iron, zirconium, titanium, niobium, nickel, tantalam, aluminium, copper , portable submersible pump...

Village Panchayat - Tamil Nadu

33192979 tender for supply of materials rcc pipe 2, np 3 150 mm to 1200 mm, paver block normal and rubber mold, benches, various size concrete, sand, greet, metal 25 mm to 90 mm soft morum, pvc and gic pipe and iron valve, cement isi opc brand bag and various size iron, brick, various c.c.t.v camera, led street light, electric wiring cable and switches, submersible pump motor, bore cable starter. hiring of jcb. repairing of submersible pump motor. labor works. door to door garbage collection etc at tagdi....

Tamil Nadu Cooperative Sugar Federation Limited - Tamil Nadu

33192050 single 3 phase 3hp openwell submersible pump as per tender specification , 3phase 3 hp openwell submersible pump , 3phase 3 hp openwell submersible pumpcapacity : 3 hp head range : 09 to 24 meter phase : 3 phasevolts ; 415 voltsection / delivery : 50mmdischarge : max 20 m3 / hrmake : kirloskar / crompton / lakshmi / texmo , single phase open well submersible water pumpcapacity : 1 hp head range : 06 to 15 meter phase : single phase 180v 230vsection / delivery : 25mm discharge : max 08 m3 / hrmake : kirloskar / crompton / lakshmi / texmo enquiry may be floated to authorized dealer...

Town Panchayats - Tamil Nadu

33060428 construction of modern lpg gasifier crematorium at ward no 2 survey no 234 1, 234 3 kayalpartinam south part village burial ground in thiruchendur road, arumuganeri town panchayat, thoothukudi district. , earth work excavation for foundation in all types of soils and sub soils to full depth ( such as soils in rock / silt / light black cotton soil / ordinary soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the departmental officers with initial lead of 10 m and initial lift of 2 m. complete as per tnss23 & 24, v, vi ( s2 ) , vii, 9, 10 , gravek soil i depth of 2 mt , ii depth of 2 mt 3 mt , supply delivery and filling ofstone dust in layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per standard specification tnss no. 24 & 25. , plain cement concrete of mix 1 : 4 : 8 ( one part of cement four part of sand eight part of aggregates ) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. tndss no: 28 v, vi ( s2 ) v, vi ( s5a ) vii , supplying and fillingofu / s gravelfromapprovedquarry in layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per standard specification. , supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing, coloumn pedestals, plith beams, grade beams, staircase steps, etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification without strutting. ( tnss no or nbc no 30 ( s ) 86 86 a v, vi ( s3 ) vii , belowground level , ground floor , column , supplying ribbed tor steel rodsincluding cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 bwg etc. complete for all rcc works.as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. ss86 & 86a, v, vi ( s3 ) ( s6 ) vii. , providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg / cum and maximum water cement ratio of 0.55 including admixture ( plasticiser / super plasticiser ) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about ( 5.0cum ) , 7730kg of 20mm machine crushed stone jelly and with about ( 3.3 cum ) , 5156kg of 10 12mm machine crushed stone jelly and with about ( 4.79cum ) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is standards. ( no separate payment will be made by the department for the excess usage of materials ) footing, plinth beam, tie beam / lintel, ground floor roof beam, salbs, sloped roof beam and slabs30 v, vi ( s5 ) vii & 13 , below ground level , ground floor 0.00 mt to 4.50mt , plain cement concrete 1:8:16 ( one cement eight fine aggregates and sixteen coarse aggregates ) using 20mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 30 v, vi ( s5 ) vii & 13 , brick work in cm 1:5 ( one cement & five sand ) using iiclass ground moulded bricks of size 9x43 / 8x 23 / 4 standard specification including finishing, curing, etc., complete complying with standard specification 31 & similar to 31c v, vi ( s5 ) vii , below ground level , ground floor , first floor , brick partition walls of 10.80cm thickness using best quality country bricks of size 8 3 / 4 x 4 1 / 4 x 2 3 / 4 in cement mortar 1:3 ( one cement and three sand ) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. ( hoop iron reinforcement will be measured and paid for separately ) , specialplastering in cement mortor 1:3 mix ( one cement, , three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.tndss no: 56, 57 , weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime ( no sand to be used ) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the rcc roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.61 v vi, ( via ) 3 , finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in cement mortar 1:3 ( one cement add three sand ) 12 mm thick mixed with water proofing compound conforming to iss at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as per standard specification and as directed by the deparmental officers 44 h v, vi, ( s5a ) vii , 3 , paving the floor with best approved quality fine polished kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than adanga marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 ( one cement and three sand ) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., the kota stone slabs and other materials to be used shall be got approved by the executive engineer concerned before use on work, etc., complete as per standard speicification.39 a , paving the floor with pre polished concrete anti skid tiles ( required shape and design ) of 20mm thick of approved quality and colour laid in cement mortar 1:3 ( one cement and three sand ) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. ( the make and brand of the tiles should be got approved by executive engineer before use on works ) , vibrated plain cement concrete 1:2:4 ( one cement, two sand and four hard broken stone jelly ) using 20 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. ( the rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers 30 v, vi ( s5 ) vii & 13 , plastering in cement mortor 1:5 mix ( one part of cement, , five part of sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.tndss no: 56, 57 , supplying and painting the new plastered walls with two coats of exterior emulsion paint ( weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per ( isi std ) ( it mustprovide excellent resistance against the growth of algae and fungi on the walls. and it must offer excellent protection against alkali and uv degradation and the durability period should be 5 years. 61 v, vi ( s4 ) 3 , providing upvc ( un plasticized polyvinyl chloride ) door: providing and fixing casement doors fabricated from un plasticized polyvinyl chloride ( upvc ) sections. profiles: the profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. the window unit should be designed with all corner joints mitred and fusion welded. windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. the sash should be of 60 x 102mm. the mullion should be of 60 x 74mm. the profiles should have co extruded seals. hardware: all the hardware like friction stays, handles should be screwed with self tapping screws. the handles, locks should be designed so that they cannot be released from outside. glazing: the window system should be glazed with 5mm plain float glass / 6mm bison lam installation: the profiles should be cut to length and welded 45 degrees. the window should be designed such that the water drainage does not pass through the reinforcement chamber. the window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. ( pwd sor page no.65 s.i no.264 ) , supplying and fixing of rolling shutters shall be pull and push type ( mannually operated ) made of 18g / 3 lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. these five main parts are made out of special components detailed below: curtain shall be of 18g / 3 lath sections cut to required size and filled with heavy cast iron / ms clips. for 80 ( 2.45m ) high rolling shutter lath sections provided shall be not less than 37 numbers. lock plate shall be 10g ms sheet and attached to the side brackets with 20mm square bar.side brackets shall be of 10g ms plate and cast iron u clamps shall be rivetted to the side brackets. roller shall be of heavy cast iron pullies fitted with heavy duty c class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. side brackets shall be of 10g ms plate and cast iron u clamps shall be rivetted to the side brackets. hood cover shall be of 0.8mm crca sheet reinforced with 25mmx25mmx3mm ms angle or gate channel. the rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete. , supplying and fixing upvc ( un plasticized polyvinyl chloride ) louvered ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with gi / 1mm 125gsm and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. the epdm rubber ( blackcolour ) covered with all over the edges of frame and shutter.the corners and joints should be welded and cleaned.radiations pin headed glass 4mm thick should be provided inthe louvers. the window should be fixed to the wall with100% packing with screws and silicon packing all round theframes. the ventilator should be got approved from theexecutive engineer before use on work pwd sorpage no : 66 , supplying and fixing upvc ( un plasticized polyvinyl chloride ) windows of casement type ( open ) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with gi / 1mm 25gsm and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. the epdm rubber ( black colour ) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. the corners and joints should be welded and cleaned. radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. the connecting mechanism between sash and outer frame that enables opening of the window. the window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. the window should be got approved from the executive engineer before use on work page no : 65, sl no: 265 , supplying & fixingdoor shutters for solid core flush shutters with teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to is:12406 / 1989 with 35x12mm t.w. lipping on all edges with necessary adhesives and cp screws complying with standard specifications. the rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 no. 300mm aldrop 1 no. alu handle ornamental type 2 nos and 1no.door stopper etc complete. page no : 42 sl. no : 121 , supply and fixing of stainless steel ( salem stainless steel ) door frame ( box section using stainless steel plate of 1.6mm thick ) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc. pwd sor page no:: 44sl. no: 131 , manufacturing, supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304l grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. the vertical pipe has to be welded to the 100 x 100 x 6mm ms base plate encased in the base concrete. the rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete pwd sor page no:: 57sl. no: 131 , supply and fixing of m.s grills for windows, with one coat of red oxideprimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc, complete as per standard specification. including phosphating as per isi with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and steel doorcomplete as directed by the departmental officer. , painting the new iron works such as steel doors, windows, ventilators windows bars, balustrades etc, in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand ( to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with standard specification. ( the make, quality and colour of paint should be got approved bythe engineer in charge before use on works ) ( tnss no or nbc no 61 v vi ( 54 ) 3 ) , painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. ( the make, quality and colour of paint should be got approved by the executive engineer before use on works. ) , dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in cement mortar 1:2 ( one cement and two sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. 39a , supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and round bars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification , fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. the materials should be of ppgi tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. the sheet should be g.i.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer.the washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of z 120 gsm paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. the sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. , supplying and fixing in positon indian water closet ( oriya type ) of size 580 x 440mm white glazed earthern ware of approved quality and brand with p or s trap conforming to bis with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one lime, two sand and five brick jelly ) 100mm thick and finishing the top to the required slope and including giving necessary connection to ci soil pipes ( including the cost of 100mm dia ci pipe for a length of 600mm ) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. ( the water closet should be got approved by the executive engineer before use on works ) . , supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm ( with pedestal / without pedestal ) with a pair of cast iron brackets, including cost 15mm dia brass cp pillar tap, 32mm dia b class gi waste pipe with rubber plug and chain, 15mm dia gm wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia cp brass waste coupling including fixing of wash basin using ci brackets on to the wall in position with tw plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. ( the wash hand basin and specials should be got approved by the executive engineer before use on works ) . , supplying and fixing in position white / colour glazed european water closet of best quality and approved make with 100 mm p or s trap connecting with ci pipe of 100mm dia / pvc pipe of 110mm dia, double flapped rigid pvc black seat and seat cover with cp brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity pvc / 12.5 litres capacity porcelin low level flushing tank with a pair of ci brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white pvc flush hand using indian adopter joint including all internal fittings uch as 15mm brass connections, 15mm gm wheel valve, 15mm brass nipple ( 2 nos. ) , 15mm nylon connection, tw plugs, screws and also giving necessary connection to the pvc pipe including cost of 600mm length of 110mm dia pvc pipe and painting the ci brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re doing the dismantled masonry to original condition etc. complete complying with standard specifications. ( the ewc and flushing tank wiht all accessories should be got approved by the executive enginer before use on works ) , supplyingandfixingin position best approvedof bis quality 110mm p.v.c rainwaterdownfallpipe having a pressure of 4kg / sq.cm including cost of necessary pvc shoe, pvc bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the rcc roof slab including finishing neatly etc, complete. the rate shall be inclusive of cast of removable cast iron grating. the pvc pipe shall be fixed in wall with special type of uclamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc, completecomplyingwithstandardspecifications. , conducting geophysical survey, quality and quantity test and transportation charges etc, ( this includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist ) , drilling150 mmdiaborewellin hard rock areas anywhere in the state inculding transportation to site of work in hardrock areas inculding labour charges for insertion of ms casing pipe and flushing of borewell and for minutes. , upto 150m below g.l. , from151m 180 m , from181m 210 m , from211m 240 m , supply and delivery of unplasticised ribbed screen pvc casing pipe of the 150mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per is / 12818 / 92 and as amended from time to time to suit the borewell upto 80m depth ( c.s ) with isi marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete.twad page no : 22 , supplyanddelivery of three phaseof50 lpm175 mtr head submersible pumpset of motor isi / isowith threephase panel board with two level guard and auto startas per isi specificationsincluding all cost and conveyance to site etc., complete , three phaseof50 lpm175 mtr head submersible pumpset twad page no : 98 , supply and delivery of three phase panel board star delta with two level guard and auto start suitable for submersible pumpsets and accessories including all fittings suitable for submersible pump sets.panel board should be provided as per specification. rates inclusive of packing, loading, freight, unloading, stacking, transit andinsurance charges etc, complete twad page no : 110 , supply and delivery offollowing 50 mm dia upvc column pipe and gi pipes and other special materials of good quality includingcost of materials and labour with cost for coveyence to site etccompletecomplyingwith standardspecifications. etc., , 50mm dia upvc column pipe twad page no : 24 , 50mm upvc . elbow pwd page no : 107 , 50mm upvc . union , 50mm upvcbend , 50mm gate valve twad page no : 45 , 50mm gm n.r.v twad page no : 45 , 50mm pvc mta twad page no : 27 , 50mm end pvc cap pwdpage no : 100 , 50mm dia gi flange set twad page no : 44 , 50mm m.s. clamp set twad page no : 44 , supplying and fixing of pvc insulated and sheathed 3 core 4sq.mm flat type copper cable cofirming to is 694 / 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification. twad page no ; 116 , labour charges for the erection of 50 lpm175 mtr head submersible pumpsetin borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tnicn switches starter, voltmeter, ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables andtwin earthing as per ie rules., complete and testing the pumpset and trail run for 10 days. twad page no287 , supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete. , 32 mm dia, pvc pipe , 20 mmdia, pvcpipe , 32mm pvc.elbow , 32mm pvc. bend , 32mm pvc. tee , 32mm pvc. end cap , 20mm pvc. bend , 20mm pvc.elbow , 20mm pvc. tee , 32mmx20mm pvc.reducertee , suppling and fixing in position15mm.diameter pvc screw down tap ( heavy duty ) of approved make conforming to i.s.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary. , supplying and fixing in position first quality and approved variety of 32mm gun metal gate valve ( heavy type ) with i.s.i.mark of the following sizes including cost of shellac , thread etc, .including labour for cutting and threading of g.i.pipes etc., complete complying with standard specifications for both internal and external water supply arrangements. , supplying and fixing positionpvc nahani trap ( pvc nahani trap of size 100 x 75mm ) with stainless steel gratings with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( one part of lime, two part of sand and five part of 40mm gauge brick jelly ) and finished with cement mortar 1:3 ( one cement, three sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the ci / pvc pipes, etc., complete complying with standard specification. ( the nahani trap should be got approved by the executive engineer before use on works ) , supplying and fixing in position best quality 110mm dia p.v.c soil / waste pipes ( 6ksc ) with specialshaving isi mark and providing leakproof joints including fixing to the wall with p.v.c / m.s clamps etc., and making connection to all sanitaryfittings, dismandling masonry / r.c.c. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. , 110 mm dia pvc pipe , 110 mm dia pvc ellbow , 110 mm dia pvc tee , 110mm dia pvc door elbow pwd pg.no:102 , 110mm dia pvc door tee , 110mm dia pvc door yee , 90 mm dia pvc pipe , 90mm dia pvc elbow , 90mm dia pvc tee , 90mm dia pvc door elbow pwd pg.no:102 , 90mm dia pvc door tee , 90mm dia pvc door yee , supplying and fixing of 2000 liters capacity hdpe tank with is specification is 10701 / 96 the tank is meant for outdoor ( or ) indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all pvc specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.the rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. ( the water tank should be got approved by the eebefore use on work. twad page no ; 85 , supplying and fixing in position c.i.manhole covers ( light or heavy duty ) of 600 x 600mm in size of best approved quality and as per standard specifications etc., complete. , supplying and fixing pvc ventilating shaft of 110mm dia ( having working pressure 4 kg. / sq.cm ) with 3 metre height including cost of pvc cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers , supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 x 450mm wth necessary plastic back, pvc frame with bottom stand of approved colour with brass screws, rawal plugs etc., complete complying with standard specifications. , supplying and fixingbest approved quality brass c.p / al anodised towel rail 600mm. long and 20mm diameter with brackets of same material including cost of teak wood plugs and c.p.screws etc., complete complying with standard specifications , supplying and fixing best approved quality c.p.soap tray of size 150mm x 100mm including cost of teak woodplugs, brass screws complete complying with standardspecifications. , supply and laying of3.5 x 35 sq.mm pvc armoured ltugcable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt.layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.twad page no ; 116 , wiring with 2 x 1.5 sqmm ( 22 / 0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t. switch with continuous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable colour for pvc concealed light point / fan point ( for electronic regulator ) . etc, complete as per standard specifications. sd 24 , wiring with 2 x 1.5 sqmm ( 22 / 0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 150 x 100 x 113 mm tw switch box with 3mm hylum sheet cover for5a 3 pin non inter locking cs plug with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed pvc plug point.etc, complete as per standard specificationssd 38 , wiring with 2 x 4sqmm ( 56 / 0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 150 x 100 x 113 mm tw switch box with 3mm hylum sheet cover for15a 3 pin non inter locking cs plug with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed pvc power plug point. etc, complete as per standard specifications. sd 40 , supply and run of 2 of 1.5 sqmm ( 22 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour.etc, complete as per standard specifications sd 54 , earthing as per p.w.d. standard with an earth electrode of 2mtr. class b gi pipe of dia not less than 32mm complete with necessary masonry work. etc, complete as per standard specificationssd 234 , supply and fixing of 3 phase 4 wire 4 way icdb of 32 a per way with 100 a tpn mc switch with suitable trunking box ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection etc, complete as per standard specificationssd. 175 , supply and fixing of horizontal type 4 way triple pole neutral mcb distribution board in sheet steel enclosure with 40 a 4 pole mcb isolater as incoming and 12 nos. 6a to 32 a sp mcb as outgoing in flush with wall and making good of the concealed portion with earth connection. the mcbdb and mcbs should be with the isi mark etc, complete as per standard specificationssd.179 , supply and run of 2 of no.8 swg gi wire for guarding with cradle with no.8 swg gi wire at the equal interval of 1.5m etc, complete as per standard specifications sd.75 , supply and run of 4 x6 sq.mm ( 84 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade on 7 / 20 gl bearer wire for service connection mains etc, complete as per standard specifications.sd 68 , supplying and laying of pvc insulated, pvc sheathed, armoured, ltug cable of size 2 core 10 sqmm al.cable clamped on walls ( sd 210 ) , supplying and fixng of cable gland and termination with earth connection of size 2 core 10 sqmm etc, complete as per standard specification. ( sd 182 ) , supply and fixing of tneb board suitable for 3 phases 63a service connection made up of suitable angle iron frame work of size 2 feet x 1 1 / 2 feet using angle iron of size 1 1 / 2 x 1 1 / 2 x 1 / 4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1 / 2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 nos 63a fuse units ( 500v ) 1 no. neutral link, copper earth flat of size 1 x 1 / 4 with inter connection of eb meter to fuse units by 7 / 16 pvc insulated copper wire with earth connection complete.sd 129 , supply and fixing of 32 a tpn mc switch on incoming and 3 nos 32 a dpmc switch ( front handle ) as outgoing with suitable adoptor box with suitable ms cable entry box trunking boxes and internal connections on internal connections on suitable ai frame work with earth connection etc, complete.sd 172 , supply and fixing of 3 phase 4 wire 4 way icdb of 16 a per way with 32 a tpn mc switch with suitable ms cable entry boxes trunking box and internal connections on suitable angle iron frame work with pwd earthing etc, complete.sd 173 , earthing as per the isi specification with an earth electrode of 2.1mt class b gi pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm rcc cover slab for the brick masonry . sd 233 , supply and run of 2 of 4sqmm ( 56 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14swg cuwireand making good of the concealed portion with suitable colour ( sd57 ) , supplying and laying of 3½ x 50 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ sd 200 ] , supplying of 4 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ sd 196 ] , supplying and fixing of single box type 2 x 20 w led light fitting complete with electronic choke and teakwood round blocks on wall or ceiling with fluorescent tube with pvc unsheathed copper leads from terminals to the fitting. [ twad sor electrical page no ; 173 sl. no : 15b ] , supplying and fixing of 1200mm ( 48 ) sweep ac ceiling fan complete with regulator with 1m down rod including s & f of fan clamp with side plates and cross arm etc, complete as per standard specifications sd 107 , supply and fixing of 300mm ( 12 ) sweep ac exhaust fan complete with necessary wall opening and making good of the wall.etc, complete as per standard specifications. sd 115 , brick lining for 300mm thick in furance roof fibre li 2800l x 900w x 700h in mmning chamber size, door operation : up & down movement manual operated max operating temparature : 700 900 dec celsius. etc, complete. , lpg burner set with lpg bank $ control panel: supply of 4 nos, 5 burner with blower and fully auto control system like 0, 000 kcal capacity lpg fired ignition, flame sensor and auto cut off incorperated in a separate sequencecontoller equivalent to imported contol system for air and lpg with auto igniting system and supply of 20 + 20 cylinder bank with pipeline from lpg cylinder bank up to each burner end by using tata c class grate material pipe with required material etc, complete , 3 hp motor 2no.for use to id fan & 1hp motor use for wet scrubber wet scrubber for gas cleaning system: the system should be enhanced with stainless steel cylinder and ss id fan ( 3hp motor x 2nos. with isi standard ) to avoid rusting, volume of water should be increased for effective scrubbing. , guy supported chimney: this is a cylindrical type ms is 2062 quality, 8mm plate chimney with two coasted of aluminium heat resistance paint exrernally, 7000 mm, long bottom cylindrical chimney. it is rested on 16mm type ms is 2062 qyality ( 100 feet thick base flange and stool flange 16mm thick with 12mm gusset support, cylindrical chimney mounted on foundation 12nos x 25mm dia bolt, nut joints, top 1 cylindrical shell boiler quality 8mm plate x 7000mm long base chimney. it is rested 50mm width base flange & wind forece curtain ms flat set, with lightening arrestor 25mm x 3mm copper flat earthing, with easy hinges type manual opened manhole door, necessary for pollution control boardmonitoringm sample ports arrangment ladder assembly with safety guard set 70 feet full height, one sets of detachable platform, over all size: 800mm dia x 400mm dia x 21000mm length with necessary all arrangements etc., complete , erection, testing and commissioning charges for gasifier etc, complete , supply, delivery, errection, testing and comissioning of 62.50kva generatorwith auto main failiure panel ( amp ) three phase out put voltage 415v consisting of diesel engine capable of delivery continious break gradial fitting water cooled radiclous assessory classes as per standad specificatons pwd sor page no: 146 sl.no; 10a , supply delivery and filling of brick jelly 20mm size with standard specification including cost and conveyance of jelly at site and all labour charges and all other incidential charges etc., complete as per standard specification. , supply delivery and filling of40mm size hbg stone with standard specification including cost and conveyance of jelly at site and all labour charges and all other incidential charges etc., complete as per standard specification. , supply delivery and filling of20mm size hbg stone with standard specification including cost and conveyance of jelly at site and all labour charges and all other incidential charges etc., complete as per standard specification....

Southern Railway - Tamil Nadu

32977126 supply of supply of micro based digital type, star and delta starter panelsupply of micro based digital type, star and delta starter panel,micro based digital type, star and delta starter panel suitable for 10 hp, 3 phase submersible pump consists of 25 a contactor (bch/l&t/c&s/abb/indoasian/schinder/standard make) 3 nos., mcb 3pole 32 a 1 no., digital voltmeter and ammeter, single phase preventer current sensing type, dry run & overload protection, on/off push buttons, 3 phase indication lamps 3 nos. make: kplite, techon, power pro, l&t or equivalent. => limited...

Southern Railway - Tamil Nadu

32976971 supply of supply of control panel board suitable for 15 hp submersible pumpsupply of control panel board suitable for 15 hp submersible pump,control panel board suitable for 15 hp submersible pump consisting of 4 pole mccb (c series) 63 a, star delta and main contactors of 32 amp, electronic single phasing preventer cum dry run preventer type spg d2, digital voltmeter, ammeter with rotary switch for phase selection, led indication lamp for 3 phase, on and off timer for automatic operation 4 way terminal block for in and out cable termination etc, which can be operated in both manual and automatic operation as per detailed specification enclosed => limited...

Southern Railway - Tamil Nadu

32976831 supply of supply of micro based digital type, direct on line starter panelsupply of micro based digital type, direct on line starter panel,micro based digital type, direct on line starter panel suitable for 5 hp to 7.5 hp, 3 phase submersible pump consists of 16 a contactor (bch/l&t/c&s/abb/indoasian/schinder make) 1no., digital voltmeter and ammeter, single phase preventer current sensing type, dry run & overload protection, on/off push buttons, 3 phase indication lamps 3 nos. make: kplite, techon, power pro, l&t or equivalent. => limited...

Southern Railway - Tamil Nadu

32976727 supply of design, manufacture and supply of digital programmable fully automatic star delta starter control paneldesign, manufacture and supply of digital programmable fully automatic star delta starter control panel,design, manufacture and supply of digital programmable fully automatic star delta starter control panel suitable for 30 hp submersible pump, wall mounting type made up in sheet steel enclosure of 16 swg of power coated paint with the following electrical components/switchgears housed and neatly wired using multistranded pvc insulated copper cable certified to is 694 or latest. the panel shall have provision at the bottom for the entry and exit of incoming and outgoing cables as per detailed specification enclosed. => limited...

Integral Coach Factory - Tamil Nadu

32943430 supply of supply of 25hp capacity, 3 phase horizontal open well submersible pumpsupply of 25hp capacity, 3 phase horizontal open well submersible pump,supply of 25hp capacity, 3 phase horizontal open well submersible pump set as per the detailed specification enclosed. => limited...

Southern Railway - Tamil Nadu

32676476 supply of vertical open well submersible pump set of capacity 25 hpvertical open well submersible pump set of capacity 25 hp,supply of vertical open well submersible pump set of capacity 25 hp, 2 stage, 150 mm dia to 200 mm delivery, having a discharge of 3400 lpm @ 23 meter head and 2400 lpm @ 37 meter head suitable for working on 415 v , ac 3 phase power supply including suitable, warranty should be 12 months from the date of delivery/supply. acceptable make : crompton, cri, ksb, karvel, deccan...

Southern Railway - Tamil Nadu

32579313 supply of submersible pumpsubmersible pump,25 hp vertical open well submersible pumpset working on 3 phase 415v ac suply having head range 58 133 mtrs at disharge range 1000 500 lpm conforming to is 14220 acceptable make: karvel / texmo / kirloskar / cri / crompton / psg/ deccan only acceptable. with control panel suitable for 25hp submersible pump star delta and main contactors of 40 amps, electronic single phasing preventer cum dry run preventer type spgd2, digital voltmeter, ammeter with rotary switch for phase selection, led indicator lamp for 3 phase on and off timer for automatic operation 4 way terminal block for in & out cable termination etc. which can be operated in both manual and automatic operation. panel board made of ms sheet 18 swg wall mounting type with powder coated and all components with netatly wired, main mccb 4 pole 63 amps as in coming and single pole 6 amps mcb for control circuit....

Southern Railway - Tamil Nadu

32561204 supply of 3 phase 7.5 hp open well submersible pump3 phase 7.5 hp open well submersible pump,3 phase 7.5 hp open well submersible motor with pump ,mono block type ,head 30 meter,cast iron impellor,copper rotor,delivery approximately 600lpm at head of 40meter, 415 volt, 50 hz ac supply, warranty one year. with test certificate make: decan, ksb,carwel or equivalent...

Southern Railway - Tamil Nadu

32561178 supply of 3 phase 7.5 hp submersible pump vertical type3 phase 7.5 hp submersible pump vertical type,3 phase 7.5 hp open well submersible motor with pump ,vertical type ,head 40 meter,cast iron impellor,copper rotor,delivery approximately 800lpm at head 40 meter,, 415 volt, 50 hz ac supply, warranty one year. with test certificate make: decan, ksb,carwel or equivalent...

Southern Railway - Tamil Nadu

32561089 supply of 15 hp horizontal open well submersible pump set15 hp horizontal open well submersible pump set,15 hp horizontal open well submersible pump set to deliver cold water, head range covering 23 mtrs to 37 mtrs and discharge capacity 2400 lpm to 1200 lpm, delivery size 80 mm suitable to operate on 415 v, 50 hz, ac, 3 phase supply conforming to is 14220. required make: deccan / karvel / grundfos / kirloskar / cri / ksb / mbh / psg / texmo / crompton / suguna only. authorised dealership certificate to be enclosed while submitting offer, test certificate and one year warranty certificate to be submitted along with supply. (note: the firm has to indicate the make and model number in their offer to assess the technical suitability)...

Southern Railway - Tamil Nadu

32560960 supply of supply of 2 hp borewell submersible pump setsupply of 2 hp borewell submersible pump set,2 hp borewell submersible pump set with dol starter confirming to is 8034, suitable for operation on 3 phase, 415v, 50 hz, ac supply. outlet size 40mm along the pump discharge range of 40 lpm to 30 lpm at a head of 110 m to 119 m suitable for 150 mm dia borewell. the dol starter with single phase preventer, dry run protection, on/off push button with 3phase indication lamp, volt meter, ammeter etc with neatly wired in ms powder coated box. required make of pump: ekki / deccan/ grundfos /kirloskar/ cri/ ksb/ mbh / psg / texmo/ crompton / suguna only. note: the firm has to indicate the make and model number in their offer to assess the technical suitability. authorised dealership certificate to be enclosed while submitting offer, test certificate and one year warranty certificate to be submitted along with supply....

Southern Railway - Tamil Nadu

32560769 supply of 2hp single phase borewell submersible pump2hp single phase borewell submersible pump,2hp single phase borewell submersible pump capable to deliver approximately 2000 3000 lph at a total head of 600 feet with dia.of 4 inch and 30 stage with mouth size 1 1/4 suitable to erect in bore well with working voltage of 230v,50hz ac supply with isi mark and is no.8304 and 9283 similar to design v4 2.0hp of celvin make.warranty: 1year. make:celvin, ksb ,deccan, cri , texmo or equivalent...