Government Polytechnic College - Tamil Nadu

32145931 tender notice for polymer testing lab equipments tender notice for polymer testing lab equipment , polymer testing laboratory equipments , durometer ( shore a ) test range : 0 to 100 least count: 1 shore a durometer holder stand others: annual maintenance and regular calibration service at chennai is mandatory. in house test report is mandatory. astm d 2240 , durometer ( shore d ) test range : 0 to 100 least count: 1 shore d durometer holder stand others: annual maintenance and regular calibration service at chennai is mandatory. in house test report is mandatory. astm d 2240 , rebound resilience tester scale: 0 100 specimen holder anvil specimen holder platform adjustment screw others: annual maintenance and regular calibration service at chennai is mandatory. in house test report is mandatory. astm d 2632 , vernier caliperscale: 0 300 mm least count: 0.02mm others: annual maintenance and regular calibration service at chennai is mandatory. calibration certificate is mandatory. , digitalbalance for abrasion resistance indexaccuracy: 0.001g display: digital display density measurement: upto 3 decimal others: calibration certificate is mandatory. => limited...

Government Polytechnic College - Tamil Nadu

31321138 tender for polymer testing lab tender for polymer testing lab , polymer testing laboratory equipments , din abrasion tester• emery paper with corundum of 60 grades • dimensions of rotating drum : 150 mm diameter width x460 mm long • speed of rotation of drum : 40 rpm • lateral movement of test specimen holder : 4.2 mm per revolution of drum • rotation of test specimen : 1 • load on test specimen : 5 / 10n• total length of abrasion run : 40 meters ( about 84 revolutions ) • abrasive powering: 170mg to 220 mg • accuracy : 1 mg others: • annual maintenance and regular periodic calibration service at chennai is mandatory. • in house test report is mandatory. remark: • instrument should conform to astm d 5963 andspecimendimension is 16mm diameter with minimum 6 mm height , de mattia flex tester ( fatigue tester ) • main unit with a cycle counter: six digit electronic counter with memory back up. • max opening between grips : 75mm ( adjustable ) • flexing frequency: 5 hz or 300 cpm. • motor :0.5 hp 1 phase 50 hz • fixtures / accessories : mould for specimen 3 cavity • jig & punch assembly for crack initiation in test specimen others: • annual maintenance and regular periodic calibration service at chennai is mandatory. • in house test report is mandatory. remark: • instrument should conform as per astm d 813 , melt flow index tester• operating temperature : up to 300oc • accuracy : ± 0.2°c • digital timer : 1 no 3 digits ( 999 sec ) preset with indication & buzzer • sensor : pt 100 • diameter of heater tube cavity : 9.55 mm • dimensions of piston head : 9.47 mm • diameter x 6.35 mm long • dimensions of jet holes : 2.095 mm x 8.00 mm long • weights : 325g, 1050g, 2160g & 5000g • accessories: • orifice : 1 no ( tungsten carbide ) • piston: 1 no. scoop : 1no • orifice cleaner: 1 no, cleaning cloth: 25 nos. sample • cutter : 1no • leveling legs: 4 nos. • material charger : 1 no • spirit level : 1 no • barrel cleaner: 1 no. • tweezers : 1 no. others: • annual maintenance and regular periodic calibration service at chennai is mandatory. • in house test report is mandatory. remark: • instrument should conform as per astm d 1238 , falling dart impact tester • method b: 300 ~ 2000 g • accuracy: 0.1g ( 0.1j ) • specimen clamp: pneumatic clamp • specimen size: > 150 mm x 150 mm • power supply: 220vac 50hz / 120vac 60hz others: • annual maintenance and regular calibration service at chennai is mandatory. • in house test report is mandatory. remark: • instrument should conform to astm d 1709 => limited...

Government Polytechnic College - Tamil Nadu

30669798 polymer testing lab equipments polymer testing lab equipments boq , polymer testing laboratory equipments , izod charpy impact testerizod & charpy.pendulum hammer capacity base / 1 st : 2.71, lease count: 0.02 j, 2nd : 5.42 j, lease count: 0.05 j, 3rd : 10.84, lease count: 0.1 j, 4th : 21.68 j lease count: 0.2 j least count of indication : 0.02, 0.05, 0.1, 0.2 ( joules ) angle of fall : 150° pendulum release : manual by liver operating impact velocity : 3.46 m / sec specimen holder vice additional weight : 21.071 j motorized notch cutter as per astm d 256 / d 6110 others: annual maintenance and regular periodic calibration service at chennai is mandatory. in house test report is mandatory. instrument should conform to astm d 256 / d 6110 => limited...

Government Of Tamil Nadu - Tamil Nadu

15735743 tender for preparation of specimen, operation and maintenance of equipment in ausc facilities 1 grinding! polishing machines 2 cuttingmachine/wiresaw 3 scanning electron microscopes and support systems 4 transmission electron microscopes and support systems 5 chemical bench operations 6 ar ion millers etc. 7 multiple specimen holder xrd unit...

National Institute Of Technology - Tamil Nadu

11296530 supply of 1 fesem instrument must be the state of art, computer controlled user friendly system for high resolution imaging of metallic, non metallic, ceramics, crystals, thin films, polymers, metal oxides etc. of micro to nano scale dimensions, which will be either coated/uncoated while imaging. the fesem should have stem, eds and ebsd capability. the fesem, stem, eds and ebsd must 2 electron gun 3 resolution 4 acceleration voltage 5 chamber 6. magnification 7. probe current 8. specimen stage 9. multi specimen holder 10. removal of sample contamination 11. detectors 12. camera 13. non conductive samples/magn etic samples 14. user interface 15. electron optics 16. vacuum system 17. scanning/displ ay 18. sample exchange 19. sample preparation accessory 20. computer 21. software 22. user interface 23. energy dispersive xray detector 24. wavelength dispersive spectrometer (wds) (optional) 25. electron backscatter diffraction (ebsd) detector 26. stem detector 27. essential accessories 28. calibration 29. diagnostic support 30. power backup 31. electron optics 32. accessories 33. chamber visualization system 34. spares and undertaking for spares 35. pre installation requirements 36. environmental requirements 37. warranty training and service support 38. compliance statement...