37644717 supply of thermal printer, handheld computing device having 2thermal printer, 128x64 graphical display, 30 alphanumeric keypad. accessories: rechargeable battery & charger, usb for connectivity with pc, carrying bag & user manual. model: palmtec amphibia ( or ) equivalent. [ warranty period: 30 months after the date of delivery ] => limited...
37535040 supply of dew point meter with accesories similar to m / s.hnl model no. dp 102 or m / s.endee model no. amm 60 as per the specification furnished below : 01 type : portable 02 operation : microprocessor based 03 dew point range : 80 degree to +30 degree 04 humidity : 0 to 100% and temperature 0 75 degree centigrade 05 power supply : rechargeable battery with charger 06 display : lcd 07 inlet sampling : 1 / 4 inch od tubing with 1 / 4 inch x 1 / 2 inch male and female adapters 08 pressure rating : up to 12 kg per cm.square note : item to be supplied along with calibration certificate, user manual, warranty certificate and carry case. => limited...
37517138 supply of digital wheeldigital wheel, digital wheel diameter gauge with measuring range 800 1100 mm with least count + / 0.01mm fitted with digital dial indicator, accuracy 0.01mm. supply should be made along with calibration certificate and storage wooden box along with carrying handle, lock & key. make: jyoti, prasad, ganapathy, aoge, pie, electronica, tesa, bpi only. [ warranty period: 12 months after the date of delivery ] , digital wheel distance gauge with lcd display. model: wg 1 ( m ) or similar. range 1590 to 1610 mm . accuracy / least count: 0.1 mm. reading record capacity: minimum 25 to 50 readings. display of reading: yes , lcd spirit level to be provided. test certificate is required from nabl / govt approved lab. make jyoti, prasad, ganapathy, aoge, pie, electronica, tesa, bpi only. [ warranty period: 12 months after the date of delivery ] , digital wheel diameter gauge model wd 2 ( e ) with digital display measuring range 600 mm to 1200mm for bg wheels, least count 0.1 mm, measuring accuracy = + / 0.3mm, display built in led, weightapprox 750 gms, power supply inbuilt rechargeable battery. make: jyoti, prasad, ganapathy, aoge, pie, electronica, tesa, bpi only. [ warranty period: 12 months after the date of delivery ] => limited...
37346284 supply of pulse oximeter capable of displaying pulse rate and oxygen saturation with plethyosmography rechargeable battery backup of ni cd cells having a minimum of 12 hour discharge capacity. the pulse oximeter shall be a compact model. warranty for main unit shall be for minimum of 2 years and 1 year for its probes. note: 1. maintenance and operation manual shall be supplied along with the equipment in duplicate. 2. operation of the equipment shall be demonstrated to the custodian of the coach ( viz. ) in any one of divisions / zonal railways of indian railways on arrival of the coach at the base depot and on getting the advice therefor from the custodian of the coach / icf. [ warranty period: 30 months after the date of delivery ] => limited...
37345366 supply of battery operated 30 watt cob type led, lithium ion rechargeable battery operated 30 watt cob type led multipurpose locomotive work light having impact resistance construction, corrosion resistance aluminium die cast housing with shock and vibration proof rubberized edge, powder coated finish body, swiveling mounting bracket, removable magnetic base of following specification. wattage: 30 watt, light output 2800 lumen, ip 54 rated, lithium ion battery 4400 mah. make: groz or makita or sanlinkee. hsn code: 9405 [ warranty period: 30 months after the date of delivery ] => limited...
37281772 supply of 7.4 vdc, 800 mah lithium polymer rechargeable battery pack customised for aaronia make as per specifications enclosed...
37279942 supply of thermal printer, 128x64 graphical display, 30 alphanumeric keypad. accessories: rechargeable battery & charger, usb for connectivity with pc, carrying bag & user manual. model: palmtec amphibia ( or ) equivalent. [ warranty period: 30 months after the date of delivery ] => limited...
37107842 tender for supply of 18v/36v portable led cordless & corded work/flood light with stand, battery charger and rechargeable battery of rating 18v x 2 and 5 to 6ah , power input: ac/110v/ 50hz, lumens 8000 to 10000...
36781198 supply of laser wheel profilometer model lpm 5 ( laser wheel profilometer model lpm 5 ( , laser wheel profilometer model lpm 5 ( advanced version ) main specification 1.measured and displayed parameter : flange wear, root wear, tread wear, flange height, flange thickness, flange slope, qr and hollow tyre. 2.indian railway profiles supported:rdso 2561, rdso 91146, rdso 92082 ( 28, 27, 26 &25 ) 3.least count : 0.1 mm 4.accuracy ( all parameters ) :+ 0.1 mm / 0.15 mm ( slope ) 5.display : on provided ruggedized android device. 6.android device screen size: 7 or more 7.android device rating: military grade rugged tablet. 8.operating temp. : 20 to +50 centigrade 9.interface: usb / bluetooth 10.operating system : android 8 or higher 11.battery & charger :in built rechargeable battery provided in all hardware alog with cahrger. 12.sms generating facility :yes, available 13.languages supported: english / hindi. make: pie / riftek [ warranty period: 30 months after the date of delivery ] => limited...
36575782 purchase of rechargeable battery for upa for civil engineering department 1 rechargeable battery for upa 2 rechargeable battery should be compatible for ultasonic pulse analyser equipment ( make rtul, model : ux 4600m ) ...
36497465 bids are invited for portable sealed rechargeable single cells nickel metal hydride (rechargeable batteries) is:16048, 16046 (q3) mse total quantity : 100...
36481722 procurement of online gas detector , procurement of online gas detector , online gas detector• operating temperature : 5°c to 50°c [40°f to 122°f] • storage temperature: 20°c to 60°c [ 4° to 140°f] • gases (to detect): co2, co, ch4, c2h6, c3h8, h2s, so2, no, no2, nh3 • particulate matter : pm2.5, pm10 • power supply : 5v dc • accuracy: ± 10% • display: 7 inch colour led display [touch screen] • connectivity:wi fi [2.4ghz] • storage: micro sd card + cloud storage [aqi dashboard] • alarm: sound below 85db • mobile app: aqi india [ios & android] • pc connection: usb/web dashboard • battery: 5000 mah rechargeable battery • warranty: 1 year • purpose: to measure indoor air quality for air pollution. type: online gas monitoring & detection , packing & forwarding, insurance and transportation charges , installation and training charges...
36481260 bids are invited for sealed rechargeable battery (q3) mse total quantity : 96...
36206188 supply of supply of tri colour hand signal lamp.supply of tri colour hand signal lamp., rechargeable led based tri colour hand signal lamp. 3 watts, battery capacity 3500 mah, lithium ion rechargeable battery, colour red green, white, tricolour flash light, aluminium body, 5.5 inch length led model, one year warranty. firms offer: make / brand: watts make, brite light make or similar make. rechargeable tri colour torch com with one single white led 7 nos red flashing, 7 nos green flashing, 3.7volts lithium battery external charger with abs body. => limited...
35656942 bids are invited for sealed rechargeable battery (q3) total quantity : 96...
35654769 supply of procurement of 18 20 watts led emergency light batten t [18 20 watts led emergency light batten type (approx 36 inches long), with minimum 4000 mah li ion rechargeable battery of backup upto 3 4 hours with overcharging protection. color: white, material: polycarbonate. make: wipro, philips, havells, syska, halonix, honeywells, bpl or similar.]procurement of 18 20 watts led emergency light batten t [18 20 watts led emergency light batten type (approx 36 inches long), with minimum 4000 mah li ion rechargeable battery of backup upto 3 4 hours with overcharging protection. color: white, material: polycarbonate. make: wipro, philips, havells, syska, halonix, honeywells, bpl or similar.],18 20 watts led emergency light batten type (approx 36 inches long), with minimum 4000 mah li ion rechargeable battery of backup upto 3 4 hours with overcharging protection. color: white, material: polycarbonate. make: wipro, philips, havells, syska, halonix, honeywells, bpl or similar. [ warranty period: 30 months after the date of delivery] => limited...
35614436 repair / maintenance to flexible / rigid area, marking, sign board, path, connected ways / paving and other misc items at afs sulur schedule a boq 2 demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., including removing debris material to out side md land complete all as specified and directed. 3 manufacturing, supplying and fixing retro reflective mandatory / regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type iv of astm d 4956 01 in blue and silver white or other colour combination including subject matter, message ( bi lingual ) , symbols and borders etc. as per irc ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class 2 of astm d 4956 01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c / c to back support frame of m.s. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 nos. m.s. angles of size 35x35x5 mm to a vertical post made up to m.s. tee section ismt 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing m.s. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer ( vertical ms tee support to be painted in black and white colours ) .backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat includingincluding one ms pipe post of 50mm square pipe 3.0mtr long duly painted with alternate black and white bandsof 25cm width including taking down existing sign boards of any description and fixing in post holes filled with pcc 1:3:6 and as per direction of engineer in charge. 4 manufacturing, supplying and fixing retro reflective cautionary / warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type iv of astm d 4956 01 in blue and silver white or other colour combination including subject matter, message ( bi lingual ) , symbols and borders etc. as per irc ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class 2 of astm d 4956 01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c / c to back support frame of m.s. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 nos. m.s. angles of size 35x35x5 mm to a vertical post made up to m.s. tee section ismt 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing m.s. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer ( vertical ms tee support to be painted in black and white colours ) .backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including including one ms pipe post of 50mm square pipe 3.0mtr long duly painted with alternate black and white bandsof 25cm width including taking down existing sign boards of any description and fixing in post holes filled with pcc 1:3:6 and as per direction of engineer in charge. 5 manufacturing, supplying and fixing retro reflective overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type iii of astmd 4956 01 as approved by engineer in charge, letters, borders etc. as per irc : 67 2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class ii of astm d 4956 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. the rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position including one ms pipe post of 50mm square pipe 3.0mtr long duly painted with alternate black and white bandsof 25cm width including taking down existing sign boards of any description and fixing in post holes filled with pcc 1:3:6 and as per direction of engineer in charge. 6 manufacturing, supplying and fixing retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro reflective sheeting as approved by engineer in charge . letter, symbols, borders etc. will be as per irc 67 with required colour scheme on the boards and with the high intensity grade a. the aluminium sheet to be riveted to m.s. frame of angle iron of size 40x40x4 mm. the boards will be fixed to 1 no. 50x50 mm square post made of m.s. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti theft arrangement .sheet work to be painted with two coats of synthetic enamel paint over an under coat ( primer ) and back side of aluminium sheet to be painted with two coats of epoxy paint including appropriate priming coat including one ms pipe post of 50mm square pipe 3.0mtr long duly painted with alternate black and white bandsof 25cm width including taking down existing sign boards of any description and fixing in post holes filled with pcc 1:3:6 and as per direction of engineer in charge. 7 supply and fixing in repair metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of pmma and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 ( 150x150x300mm ) type b1 complete all as specified and directed 8 m & l repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cuttinground edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming ( including supply of road metal ) including taking up existing disturbed portion of hard core removing and deposting the same where directed by enginerin charge 9 m & l preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or using air compressor to remove all loose dirt etcto remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer vg 10 at the rate of2.5 kg per 10 sq.mcomplete all as specified and directed. 10 m & l in repairs bituminous premixed semi dense asphaltic concrete, 30 mm consolidated thickness, using paving bitumen of grade vg – 30, with 5.5%binder content by weight of total mix using paving bitumen, rolled and compacted to required camber and gradient using hot mix plant and mechanical paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and directed. 11 note for item no 10: ( i ) the actual binder content for sdac used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in boq. 12 ( ii ) price adjustment shall be done on minus side only based on paid vocher ( without considering the permissible tolerance on minus side ) with reference to binder content indicated in boq. 13 ( iii ) no prices adjustment for bitumen shall be done for variation on plus side. 14 m & l levelling of road side berm by filling, spreadingwith existing sand / moorum at lower areaand cutting at raise area the with mechanical machine and rolling of surface with road roller of capacity 8 10 tonne, including removal of extra cutting material , boulders and other materials from area and all as specified and directed. 15 note for item no 14 : the unit rates quoted by the tenderer shall be deemed to inclusive for the following: ( i ) the work in cutting and filling shall be carried out as instructed by the engineer in charge. 16 ( ii ) black cotton soil / vegetable soils and soils obtained from top 30 cm cutting shall not be used for filling and shall be disposed off as directed by engineer in charge. 17 ( iii ) boulders or soft materials are encountered in cut slopes these shall be excavated to the approved depth as directed and the resulting cavities with suitable material and thoroughly compacted as directed. 18 ( iv ) cutting and filling shall be cleared of shurbs, vegetation, grass, bush, weed, trees and saplings not exceeding 30 cm in girth, measured at a height of one metre above ground level. 19 supply and fixing in repairs cat eye, light reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions.make: 3m / simsonite / tata bp / dark eye 20 m & l 75 mm thick , moorum / red bajri filling in road side berms, laid in layers n exc. 15 cm thick, spread, levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed. 21 note for item no 20 : ( i ) moorum / red bajri required shall be brought from outside md land 22 ( ii ) compaction of moorum filling shall be carried out under optimum moisture conditions up to the standard proctor density not less than 98 percent. 23 ( iii ) measurements shall be taken after consolidation earth and 5% deduction shall be made forpayments. 24 m & l precast kerb stone as in pcc 1:3:6 type c1 using 20 mm graded stone aggregate and set in cm 1:4 including removing the old damaged kerb stone from the site and deposit out side md land where directed etcincluding making good the disturbed portion of road or path complete all as specified and as directed.note : the unit rate is deemed to be included for ( a ) demolition of concrete and removing rubish material to out side md land. ( b ) necessary form work. 25 s & f speed bump ( sb 01 ) made out of plastic material so that it can bear maximum load on it. two highly reflective reflectors moulded in pmma material welded with abs base plate through ultrasonic welding process and then fixed on speed bump so that dust and water canot tocu reflectors inside area. metalic bolts are used for installation on road. size of size l=250mm, w=750mm, h=75mm ) including taking down and removing rubbish material to outside md land complete all as specified and directed. 26 s & f delineator made out of round mspipe 2dia and 3 ft long with five bands of reflective tape hip grade. three red ( 1x6 ) and two white ( 2x6 ) with jali and one coat of steel primer and two coats of synthetic enamel paint including excavating post holes of 15 x15x 15 cm and embedded in pcc 1:3:6 and including taking down and removing rubbish material to outside md land complete all as specified and directed. 27 m & l rolling and consolidating formation surfaces in cutting to the required gradient and camber including filling in depression and hollow, watering, leveling etc., complete using power roller exceeding8 tonne and not exceeding 12 tonne capacity all as specified and as directed. 28 note for item no 27 : rolling and consolidation the formation surfaces to the required gradient and camber under optimum moisture conditions to achieve at least 98% of maximum dry density determined using modified proctor density determination method as per relevant is code. 29 supply and fix in repairs solar cat eye aluminum alloy of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency mono rystafie solar panel 2.4v / 0.3 watt one ni ed rechargeable battery ( 1.2v / 1600ma ) consisting of super bright led with 10, 000 to 18, 000 mcd completed as per manufactures instructions etc. all as specified and directed 30 note for item no 29: the cat eye shall be of 100% water proofing design according to 65 31 taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plasteringand rendering 15 mm thick in two layers onbrick or stone or concrete surfaces, first coat 10mm thick in cement mortar1:4 and 2nd coat 5mm thick in cement mortar1:4 mixed with water proofing compound as per manufacturer instructionsfinished even and smooth without using extra cement completeall as specified and directed. 32 notefor item no 31: ( a ) water proofing compound shall be measured and paid seperately. 33 ( b ) the unit rate quotedis deemed to included for removing of accumulated earth of any width and depth upto 15 cm cleaning / cutting the grass with hand operated petrol / kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protectionto outside md land 34 ( c ) periodicityof cutting of grass shall be before commencement of work and after completion of repairs. 35 supply only water proofing compound 36 m&l preparation of new plastered surfaces wallapplying two coats of cement based paint over and including a coat of primer, of any description, complete all as specified. 37 note for item no 36: ( i ) before applying cement based paint , the surface shall be thouroughly wetted to control surface suction. the surface shall be moist but not dripping wet when the paint applied .surfaces which readily absorb moisture shall be wetted in one operation not more than one hour before painting.surfaces which absorb moisture slowly shall be wtted in at least two operations not less than 30 minutes apart. 38 ( ii ) to maintain a uniform mixture and to prevent segregation , the paint shall be stirred frequently in the bucket. 39 ( iii ) painting surfaces shall be cured as soon as paint has hardened so as not be to damaged by the spray about 12 hours after the applications. 40 ( iv ) cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account. 41 ( v ) paints shall be obtained direct from approved manufacturer or from their authorized agents only and brought to site in sealed containers. the paint so procured shall be of any approved make as per list of makes specified. 42 m & l providing 75mm thick plain cement concrete 1:4:8 type d2 ( using 40 mm graded crushed stone aggregate ) as in sub base to tiles complete including demolition of concrete and removing rubish material to out side md land all as specified and directed . 43 m&l brickwork with fly ash bricks using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed 44 m & l walling of random rubble, masonary ( harder stones ) , uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. 45 m & l rendering 15 mm thick in two layers onbrick or stone or concrete surfaces, first coat 10mm thick in cement mortar1:6 and 2nd coat 5mm thick in cement mortar1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement completeall as specified and directed. 46 demolition of reinforced concretein drain or any position not otherwise specially provided for complete all as spd and directed. 47 m & l cement concrete 1:2:4 type b 2 ( using 40mm graded stone aggregate ) as in surface channels and drains including necessary form work complete all as specified and directed. . 48 m & l plain cement concrete ( 1:4:8 ) type d2 ( 40mm graded stone aggregate ) as in foundation, filling and mass concrete including demolition of exsting concrete and disposal to outside md land all as spd and directed. 49 m & l reinforced cement concrete 1:1½:3 using 20mm graded stone aggregateas in foundationfor drain slabs and the like including demolition of existing foundation and disposed to out side md land all as specified and as directed. 50 m & l reinforced cement concrete 1:1½:3 using 20mm graded stone aggregateas in slabs on drain wall and the like including demolition of existing slab and disposed to out side md landall as specified and as directed. 51 note for item no 49 & 50: necessary form work and reinforcement shall be measured and paid separately vide relevant items of this schedule 52 m & l preparation of old decoratedplastered or unplastered surfaceof wall / concrete surfaces, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement base paint complete all as specified and as directed. 53 m & l form work to sides of concrete foundaions, footings, bases of columns, rafta and raft beams, sides and soffits of foundation and plinth beams and work vertical or to better finished rough all as specified and as directed. 54 m & l form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work exceeding 200mm thick finished fair all as specified and as directed. 55 s&f high strength corrosion resistant tmtsteel bars of grade fe–500of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified. 56 m & l precast cement concrete 1:2:4, type b1 ( using 20 mm graded granite stone aggregate ) in landings, cover slabs ( for manholes etc. ) , shelves and similar articles with plain faces and set in cement mortar 1:4including taking down and removing rubbish material to outside md complete all as specified and directed. 57 m & l preparation ofpainted surfaces ofnew concrete surfaceand applying two coats of synthetic enamel painting over one coat of primerover 10 cm width or girth, complete all as specified and directed 58 notefor item no 57: ( a ) all synthetic enamel paint, plastic emulsion paint shall be of 1st quality manufactured by the standard firms of make as specified. 59 ( b ) the contractor shall inform the ge, within three weeks of the acceptance of the tender, the brand / names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of ge before their use in works. 60 ( c ) the contractor shall when so required by the ge, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant indian standards. tint of paint, will be approved by the ge. 61 ( d ) paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. the paint so procured shall be of first quality of any approved make as per list of makes specified. i. berger paints ( luxol ) , ii. jenson & nicholson ( brolac ) , iii. shalimar paints ( superlac ) , iv. goodlass nerolac ( nerolac ) , v. asian paints ( apcolite ) 62 ( e ) unless otherwise specified the tints of paint shall be as approved by the ge 63 ( f ) the contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the engineer in charge for approval. 64 ( g ) the surface shall be thoroughly cleaned and dusted. all dirt scales oil and grease shall be thoroughly removed before painting is started. the prepared surface shall be inspected and approved by the ge before painting is commenced. the weather shall not be foggy / rainy, dusty or windy. the suitability of the weather will be determined by the engineer in charge. 65 ( h ) no hair marks from the brushor clogging of paint buddles shall be left on the work. surface shall ordinarily not be painted until it has dried up completely. trial patches of paint shall be laid at intervals to check if drying is satisfactory. 66 s & f chequered cement concrete coloured tiles 300 x 300 x 25 mm thick, machine pressed heavy duty any pattern / type, chemically treatedset jointed and pointed in neat cement slurry as in paths, etc and cut and polished using grey cement andpigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar ( 1:4 ) including demolition of stone slab and tiles of any description or thickness in floors, aporon etc complete all as specified and directed. 67 s & fin repairs convex mirrors for road safety as per model no. rscm 100 of size 100 cms made up of polycarbonate reflective mirror body made of abs suitable for outdoor use complete fixed with ms pipe of 40 mm dia, length 2.4 mtr impabaded in pcc 1 : 2 : 4 type b1 of size 450 mmx x 450 mm including earth work complete ( make of gogia plastic & equivalent ) 68 m & l 100mm thick, plain cement concrete ( 1:2:4 ) , type b 1 ( using 20 mm graded mechanically crushed stone aggregates ) , as in hardstanding including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling ( to full depth ) comprising of one part heated hot blown bitumen 85 / 25 & two parts heated sand ( by volume ) , surface finished even and smooth without using extra cement, including demolition of existing concrete and removal of debris out of md land complete all as specified and as directed.note : the concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. 69 s&f high strength corrosion resistant, tmtsteel bar of grade fe 500, 6 to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire ( annealed ) not less than 0.9 mm dia., or securing with clips in stirrups , spacers and binders etccomplete all as specified and directed. 70 m & l forming construction joint, 30mm deep and 10 mm wide ( using diamond cutter ) , filled with grade a sealing compound , priming the sides, and applying masking tape on edge of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after sealant is applied by mechanical means complete all as specified and directed. 71 m & l forming contraction ( dummy ) joints, 65mm deep and 10 mm wide ( using diamond cutter ) , filled with grade a sealing compound , priming the sides, and applying masking tape on edge of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after sealant is applied by mechanical means complete all as specified and directed. 72 m & l hot applied thermoplastic compound exc 10 cm width and 2.5mm thick ( excluding thickness of glass beads ) and providing selecting glass beads @ 250gm per sqm as per irc 135, finished surface to be levelled uniform and free from streaks and holes including cleaning of surface to remove all loose dirt etc. complete all as specified & directed. make : sinor, ace polymer, tata b.p. 73 m & l forming 20mm thick expansion joints filledwith pre formed bituminous fillerand top 30mm primed and sealed with grade ‘a’ sealing compound on concrete slab of thickness 200mm and applying masking tape on edge of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after sealant is applied by mechanical means complete all as specified and directed. 74 m&l pre cast cemet concrete louves and jallies 40 mm thick in pcc 1:2:4, typeb 0 using 12.5 mm graded aggregate including moulings set in cement mortar 1:4 including dismantling existing jallies complete all as specified and directed. 75 s & f ss sign board pattern ( ss to ss 7 ) , fully retro reflective sign board made of 3mm thick acp ( aluminum composit panel ) sheet framed with 40mm round ss pipe having front / back ( both ) side entire surface fully bonded with retro reflective sheeting of hip ( high intensive prismatic ) grade having pressure sensitive adhisive. boarders and message as indicated cut out. back ground in blue and matter in white colour tape having two posts of 50mm round ss pipe 3.0mtr long including excavating post holes of 30 x 30 x 30 cm and embedded in pcc 1:3:6 and including taking down and removing rubbish material to outside md land complete and as directed by engineer in charge 76 msjoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. ( cut to ordinary lengths i.e. within 20mm of the length indicated ) including dismantling of existing one all as directed by engineer in charge. 77 m & l preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. 78 note for item no 77 : ( a ) synthetic enamel paint, shall be of 1st quality manufactured by the standard firms of make as specified. 79 ( b ) the contractor shall inform the ge, within three weeks of the acceptance of the tender, the brand / names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of ge before their use in works. 80 ( c ) the contractor shall when so required by the ge, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant indian standards. tint of paint, will be approved by the ge. 81 ( d ) paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. the paint so procured shall be of first quality of any approved make as per list of makes specified. i. berger paints ( luxol ) , ii. jenson & nicholson ( brolac ) , iii. shalimar paints ( superlac ) , iv. goodlass nerolac ( nerolac ) , v. asian paints ( apcolite ) 82 ( e ) unless otherwise specified the tints of paint shall be as approved by the ge 83 ( f ) the contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the engineer in charge for approval. 84 ( g ) the surface shall be thoroughly cleaned and dusted. all dirt scales oil and grease shall be thoroughly removed before painting is started. the prepared surface shall be inspected and approved by the ge before painting is commenced. the weather shall not be foggy / rainy, dusty or windy. the suitability of the weather will be determined by the engineer in charge. 85 ( h ) no hair marks from the brushor clogging of paint buddles shall be left on the work. surface shall ordinarily not be painted until it has dried up completely. trial patches of paint shall be laid at intervals to check if drying is satisfactory. 86 s&f of protection roadway plastic road studs photoluminicent high visible ( glow in the dark ) all weather proof road stud of 100mm x 100mm x 20mm size with orange reflectors with load bearing capacity of 16 tons and minimum glowing period 8 hours without any battery requirement fixed on existing road including taking down existing one with approved adhesive all as per manufacturers instructions and as directed.make : m / s srijan system pvt ltd / audo viso / tata bp 87 m & l preparation of painted surfaces of old concrete surfaceand applying one coat of synthetic enamel paintingover 10 cm width or girth, complete all as specified and directed 88 note for item no 87 : ( a ) synthetic enamel paint, shall be of 1st quality manufactured by the standard firms of make as specified. 89 ( b ) the contractor shall inform the ge, the brand / names of the manufacturers of paint proposed to be used in the works and submit samples there of and obtain prior written approval of ge before their use in works. 90 ( c ) the contractor shall when so required by the ge, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant indian standards. tint of paint will be approved by the ge. 91 ( d ) paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. the paint so procured shall be of first quality of any approved make as per list of makes specified. i. berger paints ( luxol ) , ii. jenson & nicholson ( brolac ) , iii. shalimar paints ( superlac ) , iv. goodlass nerolac ( nerolac ) , v. asian paints ( apcolite ) 92 ( e ) unless otherwise specified the tints of paint shall be as approved by the ge 93 ( f ) the contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the engineer in charge for approval. 94 ( g ) the surface shall be thoroughly cleaned and dusted. all dirt scales oil and grease shall be thoroughly removed before painting is started. the prepared surface shall be inspected and approved by the ge before painting is commenced. the weather shall not be foggy / rainy, dusty or windy. the suitability of the weather will be determined by the engineer in charge. 95 ( h ) no hair marks from the brushor clogging of paint buddles shall be left on the work. surface shall ordinarily not be painted until it has dried up completely. trial patches of paint shall be laid at intervals to check if drying is satisfactory. 96 m & l hardcoreofgaugenotexceeding 63mmofbroken stonesorboulders, deposited, spreadandlevelledin layersnotexceeding 15cmthick, wateredand rammed to a true surface including demolition of existing undulated hardcore surface and removing the same completeall as specified and directed. 97 s & f machine pressed rubber moulded precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to is 15658 of 80mm thickness m 40 grade, laid over and including m sand cushion of 50mm thick complete and packing the sides with pcc 1:3:6 including demolition of existing stone slabs or tiles of any description complete all as specified and directed.. 98 note for tiem no 97: ( a ) the unit rate quoted is included for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. 99 ( b ) the manufacturers test certificate andindividual test certificateof tilesmust be submitted for approval by the concerned authority prior to installation. 100 dismantling fencing wire mesh, barbed wire of any type and any size at any position on the wooden / steel post complete all as specified and directed. 101 note for item no 100: the unit rate quotedis deemed to included for removing of accumulated earth of any width and depth upto 15 cm cleaning / cutting the grass / trimming down shurbs / branches / small trees with hand operated petrol / kerosene driven grass cutting machine and removing the grass waste around 3 m from fencing postto outside md land 102 excavating in post holes ( or similar holes ) soft / loose type of soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including for removing excavated materials to out side md land complete. 103 m & l cement concrete type c 1, 1:3:6 ( using 20mm graded crushed stone aggregate ) as in foundation of fencing post, filling and mass concrete complete all as specified and directed. 104 straining and fixing only chain link fencing includingline wires, any mesh size and type of to any type of standards, rails, straining bolts etc including provision 10mm dia ms bars as line wire welded to fencing posts and ms flat iron for fixing fencing wire mesh complete all as specified and as directed. 105 note for item no 104 : supply only 10mm dia round bars measured and paid seperately under relevent item here in after. however, labour aspect for fixing is deemed to be included in this item. 106 supply only chain link meshand made of galvanised wire and shallconfirm to is 2712.2003 and having zinc coating of type heavy as laid down in is 4826 including line wires / binding wire etc fixed to any type of standards posts complete all as specified and directed. 107 s & f posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe 290 gde e 165 including dismantling posts or struts ( wood, steel or rcc ) any section, incl taking out embedded portion and making good disturbed ground posts embedded in concrete brick masonary etc complete all as specified and as directed.. 108 supply only 10mm dia round bars, cut to length , hooking ends as in wooven / straining bar ( stiches through chain link fencing between post ) complete all as specified and as directed. 109 s & f galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed ( each line of wire to be measured ) 110 demolition of existing un reinforced cement concrete in ground floors and pavings not exceeding 25 cm thicknesscomplete all as specified and directed. 111 removalofdemolished materials / debrisetc.toa distance exceeding 1.5 km and not exceeding 5 km and depositing where directed complete all as specified and as directed. 112 m & l dry lean concrete ( dlc ) of compressive strength not less than 10n / sqmm at 7 days with minimum 150 kg of cement using graded stone aggregate or as per design mix per cum laid and rolled with double drum smooth wheeled vibratory roller of 8 to 10 ton capacity complete including demolition of concrete and removing to out side md land all as specified and directed. 113 note for item no 112 : no price adjustment shall be applicable if excess quantity of cement than the minimum is used / approved based on mix design in the execution of work under this item. 114 m & l 10mm thick manufacturing sand cushion as inter face layer below the pqc including watering and consolidation spreading and levelling in layers n exc. 25 cm thick 115 s & f one layer of polythene film ( transparent colour ) 400 micron thickness as per astm d2103 / is 2508 laid over tack coat with side and end overlapping not less than 300mm all as approved by ge. 116 note for item no 115 : measurement shall be taken for net area and unit rate quoted shall deemed to include for over lapping. 117 m & l pavement quality cement concrete ( pqc ) work in pavement slab / hard standing, in single layer, using design mix with minimum cement content 400 kg / cum to achieve flextural strength 45 kg / sqcm on 28 days ( lower concrete limit lcl ) in pavement slabs, spread & compacted using vibrators and paving slip form conrete sensor paver min 4 m wide and mechanical paver with electronic sensor ( minimum 05mextendable with attachment to 8m wideto required gradient, using non circular synthetic fiber @ 0.25% by weight of cement, including necessary steel form work along the joints compacting finishing and belting / brooming all as specified and directed. 118 note for item no 117 : ( a ) construction joints / dummy joints and expansion joints shall be measured and paid seperately under respective items. 119 ( b ) deduction shall be made in computing concrete quantity for expansionjoints. 120 ( c ) contractor shall consider 400 kg of cement per cum of concrete while quoting this item.actual quantity of cement shall be used as per approved design mix.no price adjustment shall be applicable forexcess quantity of cement content i.e beyond 400 kg as perapproveddesign mix in execution of work 121 ( d ) non circular synthetic fiber shall be mixed in the pqc @ 0.25% of cement all as per manufacturers instructions and as directed by engr in charge. 122 ( e ) supply only of polyester triangular / non circular synthetic fibre shall be measured and paid seperately. 123 ( f ) cost of brooming and belting shall be measured and paid seperately. 124 ( g ) cost of steel formwork and testing as specified shall be deemed to included in the rate quoted by the tenderer 125 ( h ) maximum working temperature shall not exceed 30 degree centigradeof atmosphere. 126 ( j ) supply only of polyester triangular / non circular synthetic fibre shall be measured and paid seperately. 127 ( k ) cost of brooming and belting shall be measured and paid seperately. 128 ( l ) cost of steel formwork and testing as specified shall be deemed to included in the rate quoted by the tenderer. 129 ( m ) maximum working temperature shall not exceed 30 degree centigradeof atmosphere. 130 supply only polyester triangular / non circular synthetic fibre for pavement quality concrete pqc surface complete all as specified and directed. 131 m & l finishing surfaces of concrete pavement by belting / brooming complete all as specified and directed. 132 m&l applying one coats of water based road markingpaint of any colour such as lines, dashes, arrows, letters, boxes etc on roads, pavements and the like including preparation ofsurfaces by brushes / mechanical grinder / sand papers, making surface rough to hold paintexceeding 10 cm wide all as specified and as directed.make of road marking paint :m / s asian paints, m / s jenson and nicholson, m / s berger paints 133 note for item no 132: ( a ) the cost for using spraying machine including necessary dg set required to operate machines used for scraping / removal of existing paint deemed to be inclusive in the above quoted rate. 134 ( b ) unless otherwise specified the tints of paint shall be as approved by the ge 135 ( c ) the contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the engineer in charge for approval. 136 ( d ) the surface shall be thoroughly cleaned and dusted. all dirt scales oil and grease shall be thoroughly removed before painting is started. the prepared surface shall be inspected and approved by the ge before painting is commenced. the weather shall not be foggy / rainy, dusty or windy. the suitability of the weather will be determined by the engineer in charge. 137 ( e ) no hair marks from the brushor clogging of paint buddles shall be left on the work. surface shall ordinarily not be painted until it has dried up completely. trial patches of paint shall be laid at intervals to check if drying is satisfactory. 138 s & f in repairs machine pressed rubber moulded precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to is 15658 of 60mm thickness m 35 grade, laid over and including m sand cushion of 50mm thick complete and packing the sides with pcc 1:3:6 all as specified and directed. 139 note for item no 138 : ( a ) the unit rate quoted is included for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. 140 taking down and refixing the same steel gate not exc 3 sqm each pane after repair of rusted or damaged portion of the gate including pivote, holdfast, stopper, locking arrangement, pintal etc and necessary greasing to pivote with or including spot welding, running welding all as specified. 141 note for item no 140 : in case required new mild steel fixed with replacing rusted or damaged portion will be included in quoted rate. 142 taking down and refixing broken glass coping on top of wall in cm 1:3 complete all as specified and as directed. 143 note for item no 142 : contractor shall bring broken glass from out side md land 25mm layer of cement mortar ( 1:3 ) with broken glass @ of 10 kg per sqm in case sufficient glass not obtained from taking down and the quoted rate is deemed to be inclusive of this provision also. 144 m&l cleaning of existing cover drain / open drain ofany width and depth upto 15 cmby using jet water pressure mechanical pump, suction pump andremoving mud / silt, vegetation growth, plants / small trees etc to a distance 50m , including repairing cracks in cement mortar ( 1:3 ) where noticed in surface of drainall as specified and as directed. 145 note for item no 144 : ( a ) the work to be executed in highly restricted area. 146 ( b ) the unit rate is deemed to be included for removing of accumulated earth of any width and depth upto 15 cm cleaning / cutting the grass with hand operated petrol / kerosene driven grass cutting machine and removing the grass waste around 1m from both side of the drain to outside md land note: periodicity of cutting of grass shall be before commencement of work and after completion of repairs. 147 ( c ) the unit rate deemed to be considered for first aid and necessary safety arrangements equipment’s to be provided by the tenderer for workman. 148 ( d ) the tenderer shall adhere to time frame as per the user’s requirement and as per demand.the demand and the location of work will be intimated either by the rep of user / mes rep well in advance. in case of failure to attend the demand in time penalty will be levied for each day @ rs 500 / for non completing the requirement till completion of work.the nature of the work related to airfield maintenance, hence the delay is not acceptable. 149 m&l for repairs to pavement by cutting the existing concrete slab by machine to a length of damaged portion with an average depth of 30 40mm and average width of 25 50mm, trimming the surface and application of resin formulation in following two stages as given below including preparation of surface complete : 150 ( a ) first stage consists of application of a primer coat with epoxy resin of mix with formulation of 100 parts of araldite gy 257 ( dipenny 101 propane epichorihydrin ) and 50 part of hardner hy 140 by weight. 151 ( b ) second stage consists of application of epoxy resin mortar mix with the following formulations: ( i ) araldite gy 257 100 parts by weight ( ii ) hardener hy 140 50 parts by weight ( as per weight of araldite ) ( iii ) quartz sand no 9 450 parts by weight. ( as per weight of araldite ) 152 note for item no 149 to 151 : any excess width / depth occured during cutting more than as specifiedshall be filled with the same resin formulation in two stages as mentioned above without any extra cost to the government by the contractor. ) 153 m&l plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, with riveted, bolted or welded attachment. ( fe 410 w ( gde e 250 ) quality a including dismantling of existing one complete all as specified and as directed. 154 m & l welding in repairs, exc 2, 5 cm but n exc 5 cm in length over the metal of thickness n exc 6mm complete all as specified and directed. 155 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, cesspits, manholes, pier holes, etc. and getting out in hard / dense soil complete all as specified and directed. 156 m&l plain cement concrete ( 1:3:6 ) type c2 ( 40 mm graded stone aggregate ) asconcrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes ofsize 150 mm bore of pipe, complete all as specified and as directed. 157 s & freinforced concrete pipes class np 2 with one collar per length of pipelaid fixed to trenches150 mm bore including demolition of existing pipe complete all as specified and directed. 158 returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil. 159 m&l retro reflective tape in any pattern, shape / number / letters on old existing boards after cleaning including removing of existing letters / tape complete all as specified and directed. 160 m&l renewingcement concrete tilesin patches, area n exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tilescomplete all as directed. 161 note for item no 160 : the rate included for cutting out broken tiles, removing and cleaning loose tiles, preparing bed removing rubbish, brooming and replacing old with new tiles to match, complete with all cuttings etc, that may be required. new tiles requiredis deemed to be included in the unit rate quoted. the unit rate is also including necessary bedding in cement mortor in cm ( 1:4 ) not exceeding 15mm thick....
35554115 supply of supply of high power multi colour headlights mini cordless rechargeable led based safety inspection lampsupply of high power multi colour headlights mini cordless rechargeable led based safety inspection lamp,supply of high power multi colour headlights mini cordless rechargeable led based safety inspection lamp, four light sources built in battery with individual charger similar to railtronic model no.mri 4ls.speciication: modes of lighting: bright, dim, flashing and rare red flashing swith : push, battery :02x18650 li ion m/f rechargeable batteries, battery capacity :3.7v/2800 mah charger: 110 240v ac 50/60hz/dc4.2v, 1200 mah, power adapter, warranty one year. make: railtronics technologies of tuscan or philips or syska. [ warranty period: 12 months after the date of delivery] => limited...
35418348 supply of it component cat6 network wall socket rj45 lan faceplate ,network rj45 rj11 rjl2 crimping tool, crimper/wire stripper/wire cutter ,punch down tool network wire cable ,usb to rs 232 cable adapter ,ni mh 9v. 300mah capacity ready to use rechargeable battery ,rechargeable aa 1300mah batteries ,connector ,ufp. stp, lan & mx rj45 network cable tester ,lightning port to hdmi converter ,type c to hdmi converter ,work splicing of ofc cables etc...
35313265 tender for hand held oxygen detector hand held oxygen detectortechnical specificationmeasurement range of oxygen ( o2 ) gas concentration ( % ) : 0 25accuracy: ± 2% of measured valueresolution of oxygen ( o2 ) gas measurement: 0.01% by volsensor: electrochemical, gas sensing probepower source: li polymer, rechargeable battery & charger display lcd with backlightaccessories: along with inbuilt pump, 2 meter gas sampling hosewarranty on equipment :12 monthwarranty on sensor: 12 month...
35146565 quotation notice for the purchase of stationery items 01. a3 xerox paper 02. a4 copier paper 03. sharpener 04. pencil 05. eraser 06. spiral notepad ( size — approx. 5.5x8.5 inches ) 07. fevistick 08. highlighter 09. jumper clip 10. writing clip pad ( exam pad ) 11. spiral scribbling book —a5 size 21.gm*148cm ( approx 200 pages ) 12. cleaning cloth 13. computer cleaning kit 14. cmos battery 15. whitener . 16. file folder ( press type ) 17. expanding folder file ( document holder ) 18. long size unruled note 90 pages 19. 1.5v aa duracell non rechargeable battery for mics in the training hall 20. 1 .5v aaa duracell non rechargeable battery for jmics in the training hall 21 1 cd rw drive ( with plastic cover ) 22 first aid kit 23 cello tape & packing tape 24 non returmed tag...
35115862 supply of high power multi colour headlights mini cordless rechargeable led based safety inspection lamp, four light sources built in battery with individual charger similar to railtronic model no.mri 4ls.speciication: modes of lighting: bright, dim, flashing and rare red flashing swith : push, battery :02x18650 li ion m / f rechargeable batteries, battery capacity :3.7v / 2800 mah charger: 110 240v ac 50 / 60hz / dc4.2v, 1200 mah, power adapter, warranty one year. make: railtronics technologies of tuscan or philips or syska. [ warranty period: 12 months after the date of delivery ] => limited...
34739775 bids are invited for rechargeable smf lead acid battery (q3) , lithium ion cells and batteries for portable application (rechargeable batteries) as per is:16047/iec:61960 (q3) total quantity : 60...
34595513 supply of 14.4 volts / 4ah li ion rechargeable battery14.4 volts / 4ah li ion rechargeable battery, 14.4 volts / 4ah li ion rechargeable battery pack, for modsonic make digital ultrasonic single rail tester model rail scan 100....
34187063 supply of supply of rechargeable ledsupply of rechargeable led, rechargeable led based tri colour hand signal lamp 3 watts, battery capacity 3500mah, lithium ion rechargeable battery, colour red, green, white, tricolour flash light, aluminium body, 5.5 inch length led model, one year warranty. rechargeable tri colour torch come with one single led 7 nos red flashing, 7 nos green flashing, 3.7 volts lithium battery & external charger with abs body. => limited...
34154103 supply of rechargeable battery for remoterechargeable battery for remote, procurement of rechargeable battery for remote control of the x ray machine make: baltospot, model : ceram 35 ( as per the technical specification enclosed ) ...
34047026 supply of laser wheel profilometerlaser wheel profilometer, 1 ) laser wheel profilometer model lpm 5 ( advanced version ) main specification 1.measured and displayed parameter : flange wear, root wear, tread wear, flange height, flange thickness, flange slope, qr and hollow tyre. 2.indian railway profiles supported:rdso 2561, rdso 91146, rdso 92082 ( 28, 27, 26 &25 ) 3.least count : 0.1 mm 4.accuracy ( all parameters ) :+ 0.1 mm / 0.15 mm ( slope ) 5.display : on provided ruggedized android device. 6.android device screen size: 7 or more 7.android device rating: military grade rugged tablet. 8.operating temp. : 20 to +50 centigrade 9.interface: usb / bluetooth 10.operating system : android 8 or higher 11.battery & charger :in built rechargeable battery provided in all hardware alog with cahrger. 12.sms generating facility :yes, available 13.languages supported: english / hindi. make: pie / riftek or equivalent. 2 ) manual calibration block is to be provided. 3 ) two years warranty is required. => limited...
33608393 selection of firms for supply, installation, integration, testing, commissioning and 24x7 maintenance support of studio equipment for the period of 5 years for samagra shiksha tripod, camera dolly, wireless lapel microphone, camera mount wireless microphone , rechargeable battery socket + battery, 40w led cool lights dual colour, wireless presenter presentation remote , 19 inch teleprompter with hand control, foot control and wireless remote, 75’ inch interactive display board with stand wall mount, studio headphone professional closed back, 43 inch smart tv hd, etc...
33555370 environmental engineering practical lab environmental engineering practical lab , environmental engineering lab , ph meter microprocessor based, automatic temperature compensation expanded memory stores and reading to recalls. soft touch keypad,lcd display, auto buffer recognition , spectro photo meter deep vision digital range 340 to 960 nm to measure % o.d.absorbant concentration wi resolution 5 mm with 3 ½ digit led display , magnetic stirrer capacity 5 ltr. , magnetic stirrer device , turbidimeter bench model deep vision make digital turbidity meter3 ½ digital led display range upto 1000 ntu/jtu , dissolved oxygen meter , analetical balance capacity 210 gm, readability 0.001gm kl bright ledseven segment 0.56” display in built rechargeable battery one touch key calibration different weighing units: gm, ct, gsm, etc. capacity 210 gm, readability 0.001gm , dessilator 6” ø , dish tongs 6” ø , evaporating dish 100mm , filter membrance membrane filter holder – tarsons capacity 250 ml , vaccum pump pump capacity 100 lpm double stage, motor rating 0.5 single phase, oil charge 2 ltrs. motor pulley, base, belt gand, with vacuum pump full set , crucible silica 100 ml with lid , watman filter paper brand whatman 12cm , grade 1 , wash bottle borosilicate glass 500 ml , pippete 10 ml , pippete 25 ml , pippete 50 ml , burrete (50ml) , stand(6”x4”x8”stand, clamp, bosshead) , funnel 3” , conical flask (250ml) , beaker 10 ml , beaker 25 ml , beaker 50 ml , beaker 100 ml , bunsel burner , wire gauge , filter paper 45 x 56 per sheet => limited...
33307428 supply of portable welding machineportable welding machine,portable welding machine inverter type equivalent to model no. esab400| xc of make esab with the following specification. single phase, output ampere 400 a,240 v, 50 hz, 7 kva, with rechargeable battery, having minimum warranty of 5 years. make: esab/bosch/masters only => limited...
33244774 supply of digital wheel distance gaugedigital wheel distance gauge,digital wheel distance gauge, model no. wg 1(e) bg, fitted with built in digital display and spirit level the gauge measures the wheel distance precisely within 30 seconds to 1 minute and operates with rechargeable battery, the reading is display on alphanumeric led, the led is black light for visibility in pits and other low conditions, the gauge has memory to record at least 40 to 50 readings in its internal memory. it is provided with auto off system spec: accuracy: +/ 0.1 mm, measuring range: 1585 to 1615 mm, %u201c0%u201d set at(standard setting): 1615 mm to 1585 mm, battery: liion, spirit level: 1.5 v with nabl calibration certificate and packed in storage box with carrying handles and lock and key arrangements. make: pie or jyoti or aoge => limited...
33161684 ultrasonic flaw detector with accessories supply, installation and commissioning, demonstration and training of ultrasonic flaw detector along with standard and additional accessories as per annexure enclosed. , supply, installation and commissioning, demonstration and trainingof ultrasonic flaw detector with standard and additional accessories as mentioned below , standard accessories as follows: 14.4 volts / 4ah li ion rechargeable battery pack , battery charger cum mains power pack with charge status indicator & power cord , special leather protective case with shoulder sling and waist strap , plastic moulded foam fitted carrying case with numerical lock for storage and transportation of complete kit , dgs: transfer software on cd rom. , eincord 1 : data card to connected with pc. , illustrated instruction manual in english , calibration certificate as per astm e 317 06a traceable to npl new delhi , additional accessories as follows: normalprobes ( 24 mm dia ) ( with replaceable protective membrane ) frequency of 2.0, 4.0, 6.0 mhz, probe angle 0 degree, connector type bnc , miniature normal probes ( 10mm dia. ) ( with replaceable protective membrane ) frequency 2.0, 4.0 mhz, 0 deg, connector type mini lemo , angle probes ( 9 x 8mm ) frequency2.0mhz 45, 60, 70degree, 4.0mhz 45, 60, 70 degree, connector type mini lemo , dual crystal 2.0, 4.0mhz 6 deg connector type mini lemo , probe cable 2 meters connector type bnc to bnc , probe cable 2 meters connector type bnc to mini lemo , probe cable 2 meters connector type dual bnc to mini lemo , probe cable 2 meters connector type mini lemo to mini lemo , calibration block iiw type block v1 , calibration block iiw type block v2 , flat bottom hole as per astm e428 ( consist of 10 pieces ) , 5 step thickness gauge as per astm e 797 , replaceble protective membranes min normal probes are 10 mm dia ( consist of 10 nos ) , normal probes of 10, 24mm dia ( consist of 10 nos ) ...
33157865 bids are invited for portable sealed rechargeable single cells nickel metal hydride (rechargeable batteries) is:16048, 16046 (q3) total quantity : 200...
33101945 supply of laser wheel profilometerlaser wheel profilometer,laser wheel profilometer model lpm 5 (advanced version) main specification 1.measured and displayed parameter : flange wear, root wear, tread wear, flange height, flange thickness, flange slope,qr and hollow tyre. 2.indian railway profiles supported:rdso 2561, rdso 91146,rdso 92082(28,27,26 &25) 3.least count : 0.1 mm 4.accuracy (all parameters) :+ 0.1 mm/0.15 mm(slope) 5.display : on provided ruggedized android device. 6.android device screen size: 7 or more 7.android device rating: military grade rugged tablet. 8.operating temp. : 20 to +50 centigrade 9.interface: usb/bluetooth 10.operating system : android 8 or higher 11.battery & charger :in built rechargeable battery provided in all hardware alog with cahrger. 12.sms generating facility :yes, available 13.languages supported: english/hindi. make: pie / riftek => limited...
33087468 supply of digital wheel distance gaugedigital wheel distance gauge,digital wheel distance gauge, model no. wg 1(e) bg, fitted with built in digital display and spirit level the gauge measures the wheel distance precisely within 30 seconds to 1 minute and operates with rechargeable battery, the reading is display on alphanumeric led, the led is black light for visibility in pits and other low conditions, the gauge has memory to record at least 40 to 50 readings in its internal memory. it is provided with auto off system spec: accuracy: +/ 0.1 mm, measuring range: 1585 to 1615 mm, %u201c0%u201d set at(standard setting): 1615 mm to 1585 mm, battery: liion, spirit level: 1.5 v with nabl calibration certificate and packed in storage box with carrying handles and lock and key arrangements. make: pie or jyoti or aoge => limited...
33046343 supply of supply of rechargeable led based tri colour hand signal lampsupply of rechargeable led based tri colour hand signal lamp,rechargeable led based tri colour hand signal lamp. 3 watts, battery capacity 3500 mah, lithium ion rechargeable battery, colour red green, white, tricolour flash light, aluminium body, 5.5 inch length led model, one year warranty. => limited...
32952613 supply of supply of wi fi 4g hot spot 4gsupply of wi fi 4g hot spot 4g,supply of wi fi 4g hot spot 4g (wireless access point) with rechargeable battery and micro sd card suitable for vadafone network similar to vodafone r2174g mifi. => limited...
32943176 supply of supply of ice line type refrigeratorsupply of ice line type refrigerator,ice line type refrigerator of capacity 300 litres for the storage of covid vaccines and medicines suitable to operate on 230 volt ac 50 hz with external automatic voltage stabilizer. chamber temperature range should be +2 deg c to + 8 deg c which is controlled by microprocessor based digital temperature controller, high contrast led/ lcd display, lockable casters for easy mobility, built in ice packs to keep the temperature within range for up to 24 hours during loss of power, defrosting: manual or automatic, alarm system and rechargeable battery backup ,cfc free insulation and refrigerant, corrosion resistant construction, it should be iso and ce certified, it should meet who/ unicef standards, warranty minimum one year.make preferable: blue star, haier, voltas, godrej,eakcon, meditech only required. => limited...
32936091 supply of portable welding machineportable welding machine,portable welding machine inverter type equivalent to model no. esab400| xc of make esab with the following specification. single phase, output ampere 400 a,240 v, 50 hz, 7 kva, with rechargeable battery, having minimum warranty of 5 years. make: esab/bosch/masters only => limited...
32916360 bids are invited for broom (version 2.0) (q4) , flexible transparent sheet (q3) , portable sealed rechargeable single cells nickel metal hydride (rechargeable batteries) is:16048, 16046 (q3) , adhesive tape spindles is 13262 (q3) , roller ball pen (q4), reagent grade distilled water (q3) , air freshener liquid(q4)years of past experience required for1 year (s)same/similar service total quantity : 735...
32790408 tender for rechargeable battery...
32777762 supply of pulse oximeter capable of displaying pulse rate and oxygen saturation with plethyosmography rechargeable batterypulse oximeter capable of displaying pulse rate and oxygen saturation with plethyosmography rechargeable battery,pulse oximeter capable of displaying pulse rate and oxygen saturation with plethyosmography rechargeable battery backup of ni cd cells having a minimum of 12 hour discharge capacity. the pulse oximeter shall be a compact model. warranty for main unit shall be for minimum of 2 years and 1 year for its probes. note: 1. maintenance and operation manual shall be supplied along with the equipment in duplicate. 2. operation of the equipment shall be demonstrated to the custodian of the coach (viz.) in any one of divisions/zonal railways of indian railways on arrival of the coach at the base depot and on getting the advice therefor from the custodian of the coach/icf. => limited...
32703811 procurement of kitchen items 1 freezer deep 200 ltrs capacity, temperature range 20 to 86 deg.c., refrerent non cfc / non flammable horizontal single phase ac 230v. to be filled in online bidding form only no. 1 to be filled in online bidding form only 2 idly cooker lpg 5 tray. no. 1 3 bain marie counter no of leg 4, no of pan 10 ss l 1000mm x w:600mm h:800mm. no. 1 4 digital weighing machine, 1ookg display led, rechargeable battery, ms base platform, size: 620 x 620 x 170. 5 wet grinder 10 ltr. capacity, drum fixed, stone roller type ss 304 drum materirla, graninte stone no of stone 1. no. 1 6 commercial rice cooker, 50 litres, cylindrical, ss 304, lpg heating media, lower drain tap no. 1 7 dough kneading machine 1o kg capacity rotating device metalic arm ss 304 bowl material ss 304. no. 1 8 canteen make dosa plate m.s. lpg operated no of burner 4, ms steel size: l 1.2m x 1.25m width 0.575 x 0.625m height: 0.775 x 0.825m. no. 1 9 aluminium tabara with lid & handle size: 600mm dia heavy duty no. 3 10 heavy duty industrial mixie hp 1.5 to 2 hp 1 11 ss sink shape rectangular, hole 1, length 900mm, w: 600 x 800mm h...
32654733 bids are invited for plain copier paper is:14490 (q4) , portable sealed rechargeable single cells nickel metal hydride(rechargeable batteries) is:16048, 16046 (q3) total quantity : 120...
32577497 bids are invited for cat 6 information outlet (q3) , portable sealed rechargeable single cells nickel metal hydride(rechargeable batteries) is:16048, 16046 (q3) total quantity : 10040...
32129907 supply of supply of the recordable ultrasonic flaw detectorsupply of the recordable ultrasonic flaw detector,the recordable ultrasonic flaw detector, palmtop, ultra light, one hand operation, only few keys for user friendly operation, high resolution wvga display, auto plotting dynamic dac, usb communication port unlimited data storage on removable micro sd card, square wave pulsar model arjun 30 of modsonic make or similar, including a).2 nos. wkk 2.5 sub miniature normal proble 5mm dia crystal size 2.5mhz b). 2 nos. w70 flat 70 deg wedge c). 1 no.mpklm 2 mini lemo d).1 no.miniature block including wooden box and standard accessories a).mb 1:7.2 volts/ 4ah li ion rechargeable battery pack (qty 1 no.) b).ac 1:ac adapter mains power pack with charge status indicator and power cord (qty 1no) c).abc 1:battery charger adaptor 12 v/3 a with status indicator for external charging d).arws 1:wrist strap(qty 1 no.) e).arss 1:shoulder sling (qty 1 no.) f).al 372:plastic moulded pelican type foam fitted carrying case for storage and transportation of complete kit(qty:1no.). g).software:transfer software on cd rom (qty:1no.) h).aim: illustrated instruction operation manual in english on cd (qty 1 no.)...
32115323 supply of auto print electronic time recorder clockauto print electronic time recorder clock,auto print electronic time recorder clock with following specification: 1) works on 220 240 v ac 50hz main supply, 2) in case of power failure it shall work on ni cd rechargeable battery, 3) rechargeable ni cd battery should keep the clock working up to minimum 30 35 hrs, 4) date changing should be automatic, 5) durable frame and sturdy design for long service. make : anglo swiss/ perfect or similar...
32087251 bids are invited for lithium ion cells and batteries for portable application (rechargeable batteries) as per is:16047/iec:61960 (q3) total quantity : 75...
32063587 supply of lithium ion rechargeable batterylithium ion rechargeable battery,lithium ion rechargeable battery operated 30 watt cob type led multipurpose locomotive work light having impact resistance construction, corrosion resistance aluminium die cast housing with shock and vibration proof rubberised edge, powder coated finish body, swivelling mounting bracket, removeable magnetic base of following specification.wattage: 30 watt, light output 2800 lumen, ip 54 rated, lithium ion battery 4400mah..make: groz or makita or sanlinkee only....
32030247 bids are invited for portable sealed rechargeable single cells nickel metal hydride (rechargeable batteries) is:16048, 16046 (q3) ,alkaline battery 9v (q3) total quantity : 112...