Rural Development And Panchayats Department - Tamil Nadu

33879428 providng cc road with drain and cremation shed in total no of works 8 annur block, coimbatore district providng cc road with drain and cremation shed in total no of works 8 annur block, coimbatore district , name of work: 1.providingc.c.road with drainchinnaputhur selvakumar house h / o vadavalli panchayat , earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per ss 20 b for foundation ( 0m 0.30m ) , cement concrete 1:4:8 mix using 40mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , cement concrete 1:3:6 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., , cement concrete 1:2:4 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , plastering with cement mortar 1:5mixto 20 mm thick includingcost and conveyance of all materials to site and all labour , name of work:2. providingc.c.road with drainfromchinnaputhur thangamani house to ranganathan house h / o vadavalli panchayat , earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per ss 20 b for foundation ( 0m 0.30m ) , cement concrete 1:4:8 mix using 40mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , cement concrete 1:3:6 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., , cement concrete 1:2:4 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , plastering with cement mortar 1:5mixto 20 mm thick includingcost and conveyance of all materials to site and all labour , name of work: 3.providingc.c.road with drain from periyaputhur high school to main roadh / o vadavalli panchayat , earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per ss 20 b for foundation ( 0m 0.30m ) , cement concrete 1:4:8 mix using 40mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , cement concrete 1:3:6 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., , cement concrete 1:2:4 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , plastering with cement mortar 1:5mixto 20 mm thick includingcost and conveyance of all materials to site and all labour , name of work: 4.providing c.c. pavement near periyaputhur mayanam@h / o vadavalli panchayat , earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per ss 20 b for foundation ( 0m 0.30m ) , cement concrete 1:4:8 mix using 40mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , cement concrete 1:3:6 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., , cement concrete 1:2:4 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , name of work: 5.providing c.c. pavement from main road to vinayagar kovil at ketchamkinaruh / o vadavalli panchayat , earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per ss 20 b for foundation ( 0m 0.30m ) , cement concrete 1:4:8 mix using 40mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , cement concrete 1:3:6 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., , cement concrete 1:2:4 mix using 20mm iss metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. , name of work:6.providing cremation shed , compound wall at vadavalli panchayat , earthwork excavation and depositing on bank with initial lead and lift in all clauses of soil including cost of labour etc complete ss20b , filling in basement with excavated earth in layers of not more than 15cm. thick well rammed, watered and consolidated complying with standard specifications etc., complete. , cement concrete 1:5:10 mix using 40mm iss metal including all cost and conveyance of materials and labour charges etc., complete. , plain cement concrete 1:2:4 mix using 20mm iss metal including cost and conveyance etc., , brick work in cement mortar 1:5 mix using new country bricks including all cost and conveyance of materials and labour charges etc., complete. , supplying, fabricating and placing ribbed tor steel rods for reinforcement for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., completein all floors ( the rate to include the cost of binding wire steel also ) , supplying & erecting centering for sides & sofflots including necessary supports & strutting upto 3.29m height for plane surface in all cross bracings using mild steel sheeetsetc., complete complying with standard specifications and as directed by the departmental officers. , cement concrete 1:2:4 using 20mm iss hbg metal for all rcc item of works excluding cost of rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the rcc floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. rate for 10m3 , random rubble masonry in cement mortar 1 : 5 for foundation and basement using new stones including necessary provision for bond stones with simultaneous flush pointing with the same mortar above ground level complying with standard specifications. , plastering with cement mortar 1:5 mix 12 mm thick including all costand conveyance etc., complete. , finishing the exposed surface of rcc item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cm 1:3, 10mm thick. including raking the surface. the rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications. , exterior wall painting two coats usingwith emulsion paint over prime coat in all floors using best quality etc., complete complying with standard specifications and as directed by the departmental officers. , compound wall sub estimate , earth work excavating and depositing on bank with initial lead of 10m and initial lead of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders ( ss20b ) etc., complete in all respects as directed by the departmental officers. , cement concrete 1:4:8 ( one of cement, four of sand and eight of hard broken stone ) using 40mm size hard broken stone inclusive of shoring, strutting, bailing out water, ramming, curing etc., complete in all respects as directed by the departmental officers , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., , supplying erecting centering and shuttering for sides and including all and fixing labour charges etc., for column posts , reinforced cement concrete 1:1.5:3 ( one of cement, one & half of sand and three of hard broken granite stones ) using 20mm gauge hard broken granite stones for all reinforced cement concrete works viz. raft slabs, raft beams, column footing, plinth beam, lintel, square or circular columns, t, l, or rectangular beam , floor, roof or waist slab, drop cum parapet wall, loft, sun shade and other similar works excluding the cost and fabricationof reinforcement grills in position, shuttering, centering but including laying, vibrating, curing, finishing and providing mild steel fan hooks in the rcc slab wherever necessary as directed by the departmental officers etc., complete in all respects. , fabricating and placing the steel grills for reinforcement for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., completein all floors ( the rate to include the cost of binding wire steel also ) , brick work in cement mortar 1:5 ( one of cement and five of sand ) using country bricks of size 8 ¾×4 ¼×2 ¾ in basement and in ground floor includingfixing the frames of doors and windows, scaffolding, proper setting, curing, etc., complete in all respects. , plastering the walls with cement mortar 1:5 ( one of cement and five of sand ) 12mm thick including finishing smooth, scaffolding, setting, curing etc., complete as directed by the departmental officers. , painting two coats with emulsion paint over the one coat of priming coat including cost and conveyance of all materials to site and all labour charges etc complete , gst amount for providing service to government contract works for the above construction works. { gst amount is the total gst amount for total overall quoted amount above this row in column bb for all works in this package } ...

Indian Rare Earths Limited - Tamil Nadu

33750772 1 dismantling and removal of r.r. masonry sl.no.1 dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of engineer in charge. 2 2 dismantling and removal of rcc foundation sl.no.2 dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m etc., complete as per the direction of engineer in charge. 3 3 earthwork excavation for foundation sl.no.3 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineer in charge. 4 4 supplying, providing and laying pcc sl.no.4 supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 5 5 supplying, providing & laying rr masonry foundation sl.no.5 supplying, providing & laying rr masonry foundation / wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the engineer in charge. 6 6 supplying, providing and laying brick masonery sl.no.6 supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 7 7 supplying, providing , laying solid block brick masonry sl.no.7 supplying, providing and laying solid block brick masonry in cm 1:6 using cement concrete solid blocks of minimum size 400*200*100mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 8 8 supplying, providing and laying pcc sl.no.8 supplying, providing and laying pcc 1:2:4 mix for foundation / flooring work / kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 9 9 supplying, providing fixing twisted reinforcement sl.no.9 supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d / fe550d ( tmt bars tata / agni / jsw ) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction engineer in charge including binding, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specification and as per the direction of engineer in charge. 10 10 supplying, providing and laying cement sl.no.10 supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, complete as directed by engineer in charge. 11 11 supplying, plastering with cm sl.no.11 of scope of work supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard &trowelled smooth etc for floors & walls upto 8m height with neat finishing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineer in charge. 12 12 supply of paints , painting two coat with emulsion paint sl.no.12 supply of paints and painting two coat with emulsion paint ( asian / berger / nippon ) 1st quality of approved shade for the external / internal masonry surface upto 10m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying wall primer & putty touch up works wherever required etc complete as directed by the engineer in charge. 13 13 supplying, fabricating & fixing in position of sl.no.13 supplying, fabricating & fixing in position of partially aluminium sheet covered two leaf gate of overall size 3660x1500mm consisting of rectangular g.i. hollow section 75x40mm ( tata / jindal / kalunga ) all round and in between, with g.i. square hollow section 25x25mm ( tata / jindal / kalunga ) welded horizontal ( 1 nos. ) & vertically ( 1 nos. ) at equal spacing from top to bottom, and gate covered with 2mm thick chequeredaluminium sheet 1mtr from bottom encased with m.s. flat 50x8mm with frames in hinges portion and top portion welded with 25mmx25mm gi hollow section 450mm vertically ( 16 nos. ) at equal spacing and top and side covered with 25mmx25mm gi hollow section including all suitable hinges, kondy arrangements with the existing masonry pillars, tower bolts and locking arrangements and all joints welded, etc.sl.no 13 of scope of work in tender 14 14 engagement of labour mazdoor sl.no.14 of scope of work engagement of labour ( mazdoor ) for miscellaneous work as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

Indian Rare Earths Limited - Tamil Nadu

33706303 1 dismantling and removal of r.r. masonry sl.no 1 of scope of work dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of engineer in charge. 2 2 dismantling and removal of rcc foundation sl.no 2 of scope of work dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m, and returning the ms rod to store, etc., complete as per the direction of engineer in charge. 3 3 earthwork excavation for foundation sl.no 3 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineer in charge. 4 4 supplying, providing and laying pcc 1:4:8 sl.no 4 of scope of work supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 5 5 supplying, providing and laying pcc 1:2:4 sl.no 5 of scope of work supplying, providing and laying pcc 1:2:4 mix for foundation / flooring work / kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 6 6 supplying, providing and fixing twisted reinforcement sl.no 6 of scope of work supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d / fe550d ( tmt bars tata / agni / jsw ) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of engineer in charge including binding, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specification and as per the direction of engineer in charge. 7 7 supplying, providing and laying cement concrete sl.no 7 of scope of work supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, complete as directed by engineer in charge. 8 8 earth filling for foundation sl.no 8 of scope of work earth filling for foundation / flooring work using departmental sand including all transportation of filling sand from hup to site, levelling works, compaction, consolidation, etc. complete as per standard specifications and as directed by the engineer in charge. 9 9 supplying and spreading 150mm consolidated thick gravel sl.no 9 supplying and spreading 150mm consolidated thick gravel of approved quality above the refilled earth surface with watering, levelling works, compaction and consolidating, etc. complete as per the direction of engineer in charge. 10 10 supplying, providing and laying brick masonry in cm 1:6 sl.no 10 supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 11 11 supplying, providing & laying rr masonry foundation sl.no 11 of scope of work supplying, providing & laying rr masonry foundation / wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the engineer in charge. 12 12 supplying, plastering with cm 1:4 mix 15mm sl.no 12 of scope of work supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 8m height with neat finishing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineer in charge. 13 13 supplying, plastering with cm 1:2 mix 20mm sl.no 13 of scope of work supplying, plastering with cm 1:2 mix 20mm thick one coat floated hard & trowelled smooth etc for ornamental / sculpture works upto 10m height with neat finishing and necessary grouting including scaffolding work etc. complete complying with standard specifications and as directed by the engineer in charge. 14 14 supplying, providing, cutting and fixing of b class gi pipe sl.no 14 of scope of work supplying, providing, cutting and fixing of b class gi ( galvanised iron ) pipe of size 1x2 ( horizontal member ) by imbedding in brick wall post. the b class gi horizontal members shall require to be erected 3 rows at equal spacing with required clambing including painting with two coat with 1st quality enamel paint of approved shade ( berger / asian / nippon ) over a coat of enamel zinc chromate / zinc phosphate primer ( berger / asian / nippon ) , etc. complete as per the direction of engineer in charge. 15 15 supplying, providing, hoisting and fixing of roof trusses sl.no. 15 of scope of work supplying, providing, hoisting and fixing of roof trusses including purlin, rafter, sleeves false rafter, base plate bracing and lacing, etc. fabricated out of g.i tubular square / rectangular heavy ( c class ) pipes ( purlin 1 1 / 4; rafter 1 1 / 2; bracing 1 ) ( tata / jindal ) conforming to relevant i.s. code and providing g.i. tubular square / circular post heavy ( c class ) ( 3x3 ) ( tata / jindal ) and proper welding with base plates and base fixing with concrete including painting with two coats of approved enamel paints ( asian / berger / nippon ) over a coat of zinc chromate primer etc. complete. over the roof truss fixing with 0.47mm thick powder coated sheet / powder coated end curved sheet as per sl.no.15 of scope of work 16 16 supply of paint and painting two coat 1st quality emulsion paint sl.no 16 supply of paint and painting two coat with 1st quality emulsion paint of approved shade ( asian / berger / nippon ) for internal & external surface of walls, ceiling over a coat of cement primer ( berger / asian / nippon ) upto 5 mtr height from ground level including thorough scrapping, cleaning, removal of dirt and all tools & tackles, scaffolding, etc. and applying one coat putty touch up works for external wall wherever required, etc. complete as directed by the engineer in charge. 17 17 dismantling and removing of damaged steel structural sl.no 17 of scope of work dismantling and removing of damaged steel structural fully / partly such as roof / side cladding, purlin, trusses, bracings, columns & gates, etc. and re fixing the damaged members of dismantled structures with dismantled good steel members ( necessary fabrication to be done if required ) / new fabricated steel structures ( under item no.18 ) with welded / bolted joints with the existing structures, etc. upto 15m height from floor level as directed by the engineer in charge ( rate excluding the cost of good re usable steel & new fabricated steel under item no.18 ) . 18 18 supply of steel and fabricating the portion sl.no 18 of scope of work supply of steel and fabricating the portion / full of truss / purlins / bracing / columns / gates, etc including cutting, welding, jointing to suit the dismantled portion for replacing the worn out members of the existing trusses / purlins / bracings / column / gates or full members, etc. complete as directed by engineer in charge. ( rate including cost of all materials ) ( structural steel conforming to is 2062:2011 of make tisco / sail / rinl ) . 19 19 supplying and painting two coats with epoxy smoke grey paint sl.no 19 supplying and painting two coats with epoxy smoke grey paint ( asian / berger / shalimar ) over a coat of epoxy zinc chromate / zinc phosphate primer ( asian / berger / shalimar ) including chipping, scrapping and cleaning the surface, etc. complete as directed by engineer in charge. 20 20 dismantling, lowering the existing a.c sl.no 20 dismantling, lowering the existing a.c. / aluminium sheets / frp corrugated sheet / durashine powder coated sheet 0.47mm thick from roof / side cladding of the buildings without any damage either for repairing the existing steel roof trusses & purlins or replacing the damaged sheets, etc. and supplying re fixing the same area with new 0.47mm thick powder coated sheet / powder coated end curved sheet [ tata durashine / equivalent brand ] with 8mm dia g.i. polymer coated bolts & nuts ( aargee associates / equivalent make ) , washer, bolt cap to suit the existing m.s. angle / channel, purlin, etc. complete as per standard specification and as directed by engineer in charge. ( rate including cost of all materials ) . 21 21 dismantling, lowering the existing a.c sl.no 21 dismantling, lowering the existing a.c. / aluminium sheets from roof / side cladding of the buildings without any damage either for repairing the existing steel roof trusses & purlins or replacing the damaged sheets, etc. and supplying, re fixing the same area with new non asbestos cement corrugated ( ramco greencor / everest hi tech ) colour ( blue ) sheet roof sheet including necessary corner / bargeboard with 8mm dia g.i. polymer coated bolts & nuts ( aargee associates / equivalent make ) to suit the existing m.s. angle / channel, purlin, etc. complete as per standard specification and as directed by engineer in charge. ( rate including cost of all materials ) . 22 22 engagement of fitter for miscellaneous work sl.no 22 engagement of fitter for miscellaneous work complete as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) . 23 23 engagement of labour ( mazdoor ) for miscellaneous works sl.no 23 engagement of labour ( mazdoor ) for miscellaneous works complete as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

Central Public Works Department - Tamil Nadu

33431407 annual repair and maintenance of to gpoa rajaji bhavan at besant nagar chennai during 2022 23 sh finishing kerbstones with emulsion paint and making arrangement for independence day celebrations...

Indian Rare Earths Limited - Tamil Nadu

33296314 1 dismantling and removal of r.r. masonry sl.no.1 of scope of work dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of engineer in charge. 2 2 dismantling and removal of rcc foundation sl.no.2 of scope of work dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 5m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m etc., complete as per the direction of engineer in charge. 3 3 dis.and removal of exis. weathering course sl.no.3 of scope of work dismantling and removal of existing weathering course ( surki ) , roof tiles, plastering surface, floor, brick wall, etc. with neat cleaning by manually / mechanical tools and removal of debris within a lead of 500m, etc. complete as per the direction of engineer in charge. 4 4 earthwork exca.for foundation sl.no.4 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineer in charge. 5 5 supp., provid.and lay. pcc 1:4:8 mix for found. sl.no.5 of scope of work supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 6 6 suppl, provid. & laying rr masonry found. sl.no.6 of scope of work supplying, providing & laying rr masonry foundation / wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the engineer in charge. 7 7 suppl, provid. and lay. brick masonry in cm 1:6 sl.no.7 of scope of work supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 8 8 suppl, provid and lay. pcc 1:2:4 mix for found.on sl.no.8 of scope of work supplying, providing and laying pcc 1:2:4 mix for foundation / flooring work / kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 9 9 suppl, provid. and fix. twisted reinforce. sl.no.9 of scope of work supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d / fe550d ( tmt bars tata / agni / jsw ) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of engineer in charge including binding, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specification and as per the direction of engineer in charge. 10 10 suppl, provid. and lay. cement conc. 1:1.5:3 sl.no.10 of scope of work supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement ( rate excluding the cost of reinforcement ) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, complete as per the specification and as per the direction of engineer in charge. 11 11 suppl, plaster. with cm 1:4 mix 15mm thick sl.no.11 of scope of work supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 5m height with neat finishing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineer in charge. 12 12 suppl, providing and laying of files sl.no.12 of scope of work supplying, providing and laying with 10mm thick vitrified / marbonite double charge tiles of size 600mmx 600mm johnson / kajaria / somania brand with cement mortar 1:2 and pointing including finishing the joint and pointing flush with the surface, etc. complete as per specification and as directed by engineer in charge. 13 13 supply, provid. and finish. the floor with tiles sl.no.13 of scope of work supplying, providing and finishing the floor with johnson / somany / kajaria make anti skid ceramic tiles of size 300x 300mm of approved quality and shade in cm 1:2 15mm thick and pointing the tiles with matching colour cement, etc. complete as per specification and as per the direction of the engineer in charge. 14 14 supply, provid, lay, dado. the walls with wall tiles sl.no.14 of scope of work supplying, providing, laying, dadoing the walls with johnson / somany / kajaria make ceramic wall tiles of size 450mmx300mm of approved quality and shade fixing with cm 1:2 10mm thick, etc. including neat cleaning, grouting and finishing with shaded colour joint filler, etc. complete as per specification and as per the direction of the engineer in charge. 15 15 supply of paints and paint. sl.no.15 of scope of work supply of paints and painting two coat with emulsion paint ( asian / berger / nippon ) 1st quality of approved shade for the external / internal masonry surface upto 10m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying wall primer & putty touch up works wherever required etc complete as per specification and as directed by the engineer in charge. 16 16 supply of paints two coat with 1st quality enamel sl.no.16 of sco.of work supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade ( berger / asian / nippon ) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer / primer and putty wherever required including necessary scaffolding arrangements, etc. complete as per specification and as directed by the engineer in charge. 17 17 dism., lower. the exist. a.c. she.and re fix. with pow. coat.she. sl.no.17 of sco.of work dismantling, lowering the existing a.c. / aluminium sheets / frp corrugated sheet / durashine powder coated sheet 0.47mm thick from roof / side cladding of the buildings without any damage either for repairing the existing steel roof trusses & purlins or replacing the damaged sheets, etc. and supplying, re fixing the same area with new 0.47mm thick powder coated sheet / powder coated end curved sheet [ tata durashine / jsw colouron+ ( blue / red ) ] with 8mm dia g.i. polymer coated bolts & nuts to suit the m.s. angle / channel, purlin, gi pipes etc. complete as per standard specification and as directed by engineer in charge. 18 18 sup, fabri.and fix. of requ. size isi std c cla. gi pipe sl.no.18 of sc. of work supplying, fabricating and fixing of required size isi standard c class gi round / square / rectangular pipe for roof, gate, partition, shed, etc. complete as directed by the engineer in charge. 19 19 supp. provi.and fixing door of size 1.20x2.10m sl.no.19 of scope of work supplying, providing and fixing door of size 1.20x2.10m consisting of heavy type 40mm g.i. square pipe ( is:4923 ) all round, middle two horizontal 25mm g.i. square pipe, a middle vertical 25mm gi square pipe and full door covered with 2mm thick aluminium chequered sheet fixed with 25x5mm ms flat welded with outer frame on both sides of aluminium sheet including all supply and fixing ms kondy, locking arrangements and painting the gate with two coats of enamel paint over a coat of zinc chromate enamel yellow base primer, etc. complete as per specification and as directed by engineer in charge. 20 20 supply, provid and fix. sintex make pvc door sl.no.20 of scope of work supplying, providing and fixing sintex make pvc door of size 750x2100mm including hinges, handle and locking arrangements, etc., after restricted and careful dismantling of the existing old frame and door including all tools and tackles, etc., complete as per specification and as directed by engineer in charge. 21 21 suppl, provid, lay. and fix. elect. conce. point sl.no.21 of scope of work supplying, providing, laying and fixing electrification concealed ( polythene pipe ) point with required wire ( make: finolex / havells / polycab ) , switch box, switches ( make: polycab / havells ) with all required necessary fittings including chipping, routing, clamping and all other incidental charges, etc. complete as per the specification and as per the direction of engineer in charge. 22 22 suppl, prov. and lay. pcc 1:2:4 mix for roof terrace floor. sl.no.22 of scope of work supply., provid. and lay. pcc 1:2:4 mix for roof terrace flooring / sunshade / inner side of parapet wall work using 6mm chips and below grade hard blue granite jelly and providing 2 coat of polymer coating [ water proof coating ( sika / perma ) as per the desired ratio of manufactured product the mix shall be stirred thoroughly until no bubbles remain in the mix, any lumps found in mix shall be removed. apply first coat of polymer ( water proofing agent ) modified cementitious slurry by brush on wet cleaned surface. after drying, second coat shall be applied on the first coat etc. ] for said portion, before applying water proof coating the surface shall be cleaned and remove all dust, foreign matters loose materials or any other deposits of contamination by rubbing with wire brush, etc. and all form works, mixing, laying consolidation and curing & necessary scaffolding upto 5m height from ground level, etc. complete as per standard specifications and as directed by the engineer in charge. 23 23 supply, provid. and fixing of exhaust fan sl.no.23 of scope of work supplying, providing and fixing of exhaust fan 375mm ( 15 ) sweep ( heavy duty ) with all required necessary fittings etc. complete as per the specification and as per the direction of engineer in charge. 24 24 enga. of labour mazdoor for misc. work sl.no.24 of scope of work engagement of labour ( mazdoor ) for miscellaneous work as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

municipality - Tamil Nadu

33223641 additional facility to vadasery christopher busstand sl. no. item description 1 additional facility to vadasery christopher busstand 2 dismantling the plain cement concretecleaning away and carefully stocking materials usefull for reuse 3 dismantling the rein forced cement concrete cleaning away and carefully stocking materials usefull for reuse 4 dismantling the brick masonryincementmortorcleaning away at carefully stocking materials usefull for reuse for any thickness at well 5 removing exisiting door and windows including reused and frame, hinges etc 6 removing the damaged asbestos cement sheet without roof timbers 7 refilling the basement with excavated earth in layers of not more than 15 cm thick well rammed watered and consolidated etc. complete with standard specification. 8 earth work excavation for foundation in all types of soils and sub soils to full depth (such as soils in rock / silt / light black cotton soil / ordinary soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the departmental officers with initial lead of 10 m and initial lift of 2 m. complete as per tnss23 & 24, v, vi (s2), vii, 9,10a )coloumn depth of 3m 5m 9 boring, providing and installing bored castin situ reinforcement cement concrete pile of specified diameter and length below the pile cap in cement concrete 1:1.5:3 (1 cement, 1.5 coarse sand, & 3 graded stone aggregate of 20 nominal size) to carry a safe working load not less than specified excluding the cost of steel reinforcement but including bentonite solution mechinery & labour charges etc, all complete. (length of pile for payment shall be measured from bottom of pile to the bottom of pile cap). length of payment shall be measured from bottom pile to the bottom of pile cap 10 supply delivery and filling of river sand in layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per standard specification tnss no. 24 & 25. 11 cement concrete of mix 1 : 4 : 8 (one cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. 12 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii .a)column mat, grade beam & drainage 13 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii. b)coloumn 14 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii. c) circular coloumn 15 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii. d) slab & beam 16 providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is staandards. (no separate payment will be made by the department for the excess usage of materials) a) upto basement 17 providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is staandards. (no separate payment will be made by the department for the excess usage of materials) b) ground floor 18 providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is staandards. (no separate payment will be made by the department for the excess usage of materials) c) first floor 19 supplying and fabrication of steel and placing in position ms / ribbed tor steel grills for rcc works as per design given including cost of steel and gi binding wire in floors etc., complete complying with standard specification in force per kilogram. 20 brick work in cm 1:5 (one cement & five sand) using iii class ground moulded bricks of size 8 3/4x4 1/4 x 2 3/4 including finishing, curing, etc., complete complying with standard specification 100cft upto basement 21 brick work in cm 1:5 (one cement & five sand) using iii class ground moulded bricks of size 8 3/4x4 1/4 x 2 3/4 including finishing, curing, etc., complete complying with standard specification 100cft upto ground floor 22 brick work in cm 1:5 (one cement & five sand) using iii class ground moulded bricks of size 8 3/4x4 1/4 x 2 3/4 including finishing, curing, etc., complete complying with standard specification 100cft upto first floor 23 brick partition walls using iii class ground moulded chamber bricks of size8 3/4x4 1/4 x 2 3/4 in c.m 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification 10 sqm 24 specialplasteringinc.m. 1 : 3 ( one cement, three sand) to10 mmthickincludingallcostandconveyance ofallmaterialstositeincludingcostofcementwhichwillbepurcharedlocallybythe contractor andconveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. 25 plasteringinc.m. 1 : 4 (1cement 4sand)to12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. 26 cement concrete of mix 1 : 2 : 4 (one cement two sand four aggregates) using 20mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. 27 weatheringcoarsewith concrete broken brick jelly concrete on 20mm. gauge in pure slaked shell lime (no sand to be used) over roof slab be proportion of brick jelly to being 32cft 12.5 cft. well beaten with wooden beaters giving the required shape and thickness as directed by the departmental officers. 28 finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in cement mortar 1:3 (one cement add three sand) 12 mm thick mixed with water proofing compound conforming to iss at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 29 supply and fixing of m.s grills for windows,with one coat of red oxideprimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per isi with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and steel doorcomplete as directed by the departmental officer. 30 supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification. 31 supplying and laying of stainlesssteel hand rails fabricated with 50mm dia 40mm dia and 20mm dia stailess steel pipe used in ramp sideof hand rails and four of stainless steel pipe are welded harijontally at the middile of the hand rails made 18mm s.s. pipe & elegant stainless steel balls are provided in required places of hand rail as directed by the departmental officers. the size including cost of material welding with stainless steel grinding and good polishingand fixed in the hand rails with good position as directed by the departmental officers 32 plain cement concrete 1:8:16 (one cement eight fine aggregates and sixteen coarse aggregates) using 20mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 33 dadooing sides of walls with glazed design tiles of size 305 x 200 x 6mm set in cement mortar 1:3 ( one cement, three sand) 20mm thick and pointed with the same colour cement including cost and conveyance of all materials, labour charges complete as per standard specification. 34 floor finishing first quality design ceramic tiles of all colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete 35 supply and fixing of granite slabs (super fine polished with machine cut edges) of sizes4x2 and above 18mm to 20mm thick. laid over a base layer of cement mortar 1:3mix 20mm thick and pointed with white cement and pigment of suit the colour of stones and polished neatly as directed by departmental officers. 36 plain cement concrete of mix 1 : 3 : 6(one part of cement threepart of sand six part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. tndss no: 28 v, vi (s2) v,vi (s5a) vii 37 supplying and laying in flooringwith fully polished sinthetic grey colour granite stone of 20mm thick (average) of 4 x 2 in size laid over base layer of cementmortar 1:3 (one cement and three sand) 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers 38 supplying and painting thewalls with twocoatsweather sealedexterior emulsion paint as instructed by the departmrntal officers includingpreparation of surface curing, etc complete in all floorscomplying with standard specification. ( the colour and shade of the paint shall be got approved by the departmental officers.) 39 painting the new iron works such as steel doors, windows,ventilators windows bars,balustrades etc,in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc,complete complying with standard specification. ( the make, quality and colour of paint should be got approved bythe engineer in charge before use on works )( tnss no or nbc no 61 v vi (54) 3) 40 supply and fixing of pvc soliddoors with necessay accessories and locking arrangements including cost and conveyance of all materials and labour charges etc., complete as per standard specification 41 supplyingand fixing of rcc precast slab withcementconcrete 1:2 : 4mix using 20 mm metal for 200mm thick includingall costandconveyance of all materials and all labour and materials chargesetc complete as per standard specification 42 supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass cp pillar tap, 32mm dia b class gi waste pipe with rubber plug and chain, 15mm dia gm wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia cp brass waste coupling including fixing of wash basin using ci brackets on to the wall in position with tw plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (the wash hand basin and specials should be got approved by the executive engineer before use on works). 43 supplying and fixing in position white glazed indian water closet of size 580 x 440mm of orissa type of approved quality with p or s trap with sand cushion and forming flooring alround the closet using 40mm broken brick jellylime concrete 1:2:5 ; 100mm thick and finishing the top torequired slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / rcc works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmentalofficers. (the water closet should be got approved by the executive engineer before use on works.) 44 supplying and fixing in position urinal of approved quality andmake with p os s trap with double flapped rigid p.v.c. seat cover with c.p. brass hinges,12.5 litres pvclow level flushing tank with all internal fittings etc., complete complying with standard spoecifications 45 supplying and fixing in position white glazed european water closet of approved quality andmake with p os s trap with double flapped rigid p.v.c. seat cover with c.p. brass hinges,12.5 litres pvclow level flushing tank with all internal fittings etc., complete complying with standard spoecifications 46 supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 47 supply and laying of 4 x 16 sq.mm pvc armoured ltug cable in a trench to the excavated at a depth of 0.75 metre putting 0.15 mt. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 48 supply and fixing of brass cable gland for 4 x 16 sq.mm pvc armoured ltug cable, with earth connection. 49 supply and laying of 31/2 x 25 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15mt. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 50 supply and fixing of brass cable gland for 31/2 x 25 sq.mm ltug armored cable with earth connection. 51 supply and run of 25mm x 3mm tinned copper flat necessary clamps / supports on wall / floor / ground floor earth connection. 52 earthing as per the isi specification with an earth electrode of 2.1mt class b gi pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm rcc cover slab for the brick masonry. 53 wiring with 2 x 1.5 sqmm (22 /0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t. switch with continuous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable colour for pvc concealed light point / fan point (for electronic regulator). etc, complete as per standard specifications. 54 wiring with 2 x 1.5 sqmm (22 /0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 150 x 100 x 113 mm tw switch box with 3mm hylum sheet cover for5a 3 pin non inter locking cs plug with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed pvc plug point.etc, complete as per standard specifications 55 wiring with 2 x 4 sqmm (56 / 0.3mm ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable heavy gauge pvc pipe on wall and ceiling with pvc accessories inflush with wall with 150mm x100mm x75mm ms switch box concealed type with 3mm thick hylum sheet cover for 15a 3pin flush type non inter locking cs plug with continuous earthwire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed power plug point.etc, complete as per standard specifications. 56 supply andfixing of 16 amps dp switch with metal glad of 500v with fuse and nuetral ( side handle) on suitable tw box pwd earthing 57 supply andfixing of 16 ampsfuse unit and neutral ( side handle) on suitable tw box pwd earthing 58 supply and fixing of tneb meter board suitable for 32a single phase service connection with 32a fuse unit (500v) 32a neutral link and earth link (1 x 1/8 copper flat) on tw plank of size 375mm x 300mm x 19mm with supporting tw reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the tw plank on wall with earth connection and inter connection with 7/20 pvc insulated copper wire from eb meter to fuse unit 59 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.a)110mm dia pvc pipe 4 kg/cm2 60 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.b)75mm dia pvc pipe 4 kg/cm2 61 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.c)32mm dia pvc pipe 10 kg/cm2 62 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.c)25mm dia pvc pipe 10 kg/cm2 63 supplyingandfixingin position best approvedof bis quality 110mm p.v.c rainwaterdownfallpipe having a pressure of 4kg / sq.cm including cost of necessary pvc shoe,pvc bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the rcc roof slab including finishing neatly etc, complete. the rate shall be inclusive of cast of removable cast iron grating. the pvc pipe shall be fixed in wall with special type of uclamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc,completecomplyingwithstandardspecifications. 64 supplying and fixing in position first quality and approved variety of 32mm gun metal gate valve (heavy type) with i.s.i.mark of the following sizes including cost of shellac , thread etc,.including labour for cutting and threading of g.i.pipes etc.,complete complying with standard specifications for both internal and external water supply arrangements. 65 supplying and fixing in position p.v.c. specials such as plain bend, door bend, plain tee, door tee, offsets,y junction, plain or with door of various sizes best quality confirming to i.s.s and providing leakproof joints including fixing to wall and giving connection to the p.v.c, soil stacks, dismadling the brick masonry or r.c.c.floor or roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.a)110mm dai pvc elbow(mould) 66 supplying and delivery of following pvc pipe and specials with isi mark including cost and convience of materials etc completed.. a)75mm dia pvc elbow 4kg 67 75mm dia door elbow 68 75mm dia 45 pvc elbow 69 110mm dia pvc door elbow 70 110mm dia pvc 45 elbow 71 32mm dia pvc elbow 72 25mm dia pvc elbow 73 32mm dia pvc tee 74 25mm dia pvc tee 75 32mmx25mm dia pvc tee 76 25mmx20mm dia pvc tee 77 32 x 25mm pvc reducer 78 supplying and fixing of 2000 liters capacity hdpe tank with is specification is 10701/96 the tank is meant for outdoor (or)indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all pvc specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.the rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. (the water tank should be got approved by the eebefore use on work. 79 supply and fixing of ci nahini / floor trap with stainless steel gratings 100 mm x 75 mm including all charges etc, complete as per standard specification. ...

Town Panchayats - Tamil Nadu

33060428 construction of modern lpg gasifier crematorium at ward no 2 survey no 234 1, 234 3 kayalpartinam south part village burial ground in thiruchendur road, arumuganeri town panchayat, thoothukudi district. , earth work excavation for foundation in all types of soils and sub soils to full depth ( such as soils in rock / silt / light black cotton soil / ordinary soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the departmental officers with initial lead of 10 m and initial lift of 2 m. complete as per tnss23 & 24, v, vi ( s2 ) , vii, 9, 10 , gravek soil i depth of 2 mt , ii depth of 2 mt 3 mt , supply delivery and filling ofstone dust in layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per standard specification tnss no. 24 & 25. , plain cement concrete of mix 1 : 4 : 8 ( one part of cement four part of sand eight part of aggregates ) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. tndss no: 28 v, vi ( s2 ) v, vi ( s5a ) vii , supplying and fillingofu / s gravelfromapprovedquarry in layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per standard specification. , supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing, coloumn pedestals, plith beams, grade beams, staircase steps, etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification without strutting. ( tnss no or nbc no 30 ( s ) 86 86 a v, vi ( s3 ) vii , belowground level , ground floor , column , supplying ribbed tor steel rodsincluding cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 bwg etc. complete for all rcc works.as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. ss86 & 86a, v, vi ( s3 ) ( s6 ) vii. , providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg / cum and maximum water cement ratio of 0.55 including admixture ( plasticiser / super plasticiser ) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about ( 5.0cum ) , 7730kg of 20mm machine crushed stone jelly and with about ( 3.3 cum ) , 5156kg of 10 12mm machine crushed stone jelly and with about ( 4.79cum ) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is standards. ( no separate payment will be made by the department for the excess usage of materials ) footing, plinth beam, tie beam / lintel, ground floor roof beam, salbs, sloped roof beam and slabs30 v, vi ( s5 ) vii & 13 , below ground level , ground floor 0.00 mt to 4.50mt , plain cement concrete 1:8:16 ( one cement eight fine aggregates and sixteen coarse aggregates ) using 20mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 30 v, vi ( s5 ) vii & 13 , brick work in cm 1:5 ( one cement & five sand ) using iiclass ground moulded bricks of size 9x43 / 8x 23 / 4 standard specification including finishing, curing, etc., complete complying with standard specification 31 & similar to 31c v, vi ( s5 ) vii , below ground level , ground floor , first floor , brick partition walls of 10.80cm thickness using best quality country bricks of size 8 3 / 4 x 4 1 / 4 x 2 3 / 4 in cement mortar 1:3 ( one cement and three sand ) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. ( hoop iron reinforcement will be measured and paid for separately ) , specialplastering in cement mortor 1:3 mix ( one cement, , three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.tndss no: 56, 57 , weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime ( no sand to be used ) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the rcc roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.61 v vi, ( via ) 3 , finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in cement mortar 1:3 ( one cement add three sand ) 12 mm thick mixed with water proofing compound conforming to iss at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as per standard specification and as directed by the deparmental officers 44 h v, vi, ( s5a ) vii , 3 , paving the floor with best approved quality fine polished kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than adanga marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 ( one cement and three sand ) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., the kota stone slabs and other materials to be used shall be got approved by the executive engineer concerned before use on work, etc., complete as per standard speicification.39 a , paving the floor with pre polished concrete anti skid tiles ( required shape and design ) of 20mm thick of approved quality and colour laid in cement mortar 1:3 ( one cement and three sand ) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. ( the make and brand of the tiles should be got approved by executive engineer before use on works ) , vibrated plain cement concrete 1:2:4 ( one cement, two sand and four hard broken stone jelly ) using 20 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. ( the rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers 30 v, vi ( s5 ) vii & 13 , plastering in cement mortor 1:5 mix ( one part of cement, , five part of sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.tndss no: 56, 57 , supplying and painting the new plastered walls with two coats of exterior emulsion paint ( weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per ( isi std ) ( it mustprovide excellent resistance against the growth of algae and fungi on the walls. and it must offer excellent protection against alkali and uv degradation and the durability period should be 5 years. 61 v, vi ( s4 ) 3 , providing upvc ( un plasticized polyvinyl chloride ) door: providing and fixing casement doors fabricated from un plasticized polyvinyl chloride ( upvc ) sections. profiles: the profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. the window unit should be designed with all corner joints mitred and fusion welded. windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. the sash should be of 60 x 102mm. the mullion should be of 60 x 74mm. the profiles should have co extruded seals. hardware: all the hardware like friction stays, handles should be screwed with self tapping screws. the handles, locks should be designed so that they cannot be released from outside. glazing: the window system should be glazed with 5mm plain float glass / 6mm bison lam installation: the profiles should be cut to length and welded 45 degrees. the window should be designed such that the water drainage does not pass through the reinforcement chamber. the window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. ( pwd sor page no.65 s.i no.264 ) , supplying and fixing of rolling shutters shall be pull and push type ( mannually operated ) made of 18g / 3 lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. these five main parts are made out of special components detailed below: curtain shall be of 18g / 3 lath sections cut to required size and filled with heavy cast iron / ms clips. for 80 ( 2.45m ) high rolling shutter lath sections provided shall be not less than 37 numbers. lock plate shall be 10g ms sheet and attached to the side brackets with 20mm square bar.side brackets shall be of 10g ms plate and cast iron u clamps shall be rivetted to the side brackets. roller shall be of heavy cast iron pullies fitted with heavy duty c class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. side brackets shall be of 10g ms plate and cast iron u clamps shall be rivetted to the side brackets. hood cover shall be of 0.8mm crca sheet reinforced with 25mmx25mmx3mm ms angle or gate channel. the rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete. , supplying and fixing upvc ( un plasticized polyvinyl chloride ) louvered ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with gi / 1mm 125gsm and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. the epdm rubber ( blackcolour ) covered with all over the edges of frame and shutter.the corners and joints should be welded and cleaned.radiations pin headed glass 4mm thick should be provided inthe louvers. the window should be fixed to the wall with100% packing with screws and silicon packing all round theframes. the ventilator should be got approved from theexecutive engineer before use on work pwd sorpage no : 66 , supplying and fixing upvc ( un plasticized polyvinyl chloride ) windows of casement type ( open ) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with gi / 1mm 25gsm and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. the epdm rubber ( black colour ) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. the corners and joints should be welded and cleaned. radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. the connecting mechanism between sash and outer frame that enables opening of the window. the window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. the window should be got approved from the executive engineer before use on work page no : 65, sl no: 265 , supplying & fixingdoor shutters for solid core flush shutters with teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to is:12406 / 1989 with 35x12mm t.w. lipping on all edges with necessary adhesives and cp screws complying with standard specifications. the rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 no. 300mm aldrop 1 no. alu handle ornamental type 2 nos and 1no.door stopper etc complete. page no : 42 sl. no : 121 , supply and fixing of stainless steel ( salem stainless steel ) door frame ( box section using stainless steel plate of 1.6mm thick ) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc. pwd sor page no:: 44sl. no: 131 , manufacturing, supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304l grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. the vertical pipe has to be welded to the 100 x 100 x 6mm ms base plate encased in the base concrete. the rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete pwd sor page no:: 57sl. no: 131 , supply and fixing of m.s grills for windows, with one coat of red oxideprimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc, complete as per standard specification. including phosphating as per isi with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and steel doorcomplete as directed by the departmental officer. , painting the new iron works such as steel doors, windows, ventilators windows bars, balustrades etc, in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand ( to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with standard specification. ( the make, quality and colour of paint should be got approved bythe engineer in charge before use on works ) ( tnss no or nbc no 61 v vi ( 54 ) 3 ) , painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. ( the make, quality and colour of paint should be got approved by the executive engineer before use on works. ) , dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in cement mortar 1:2 ( one cement and two sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. 39a , supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and round bars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification , fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. the materials should be of ppgi tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. the sheet should be g.i.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer.the washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of z 120 gsm paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. the sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. , supplying and fixing in positon indian water closet ( oriya type ) of size 580 x 440mm white glazed earthern ware of approved quality and brand with p or s trap conforming to bis with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one lime, two sand and five brick jelly ) 100mm thick and finishing the top to the required slope and including giving necessary connection to ci soil pipes ( including the cost of 100mm dia ci pipe for a length of 600mm ) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. ( the water closet should be got approved by the executive engineer before use on works ) . , supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm ( with pedestal / without pedestal ) with a pair of cast iron brackets, including cost 15mm dia brass cp pillar tap, 32mm dia b class gi waste pipe with rubber plug and chain, 15mm dia gm wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia cp brass waste coupling including fixing of wash basin using ci brackets on to the wall in position with tw plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. ( the wash hand basin and specials should be got approved by the executive engineer before use on works ) . , supplying and fixing in position white / colour glazed european water closet of best quality and approved make with 100 mm p or s trap connecting with ci pipe of 100mm dia / pvc pipe of 110mm dia, double flapped rigid pvc black seat and seat cover with cp brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity pvc / 12.5 litres capacity porcelin low level flushing tank with a pair of ci brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white pvc flush hand using indian adopter joint including all internal fittings uch as 15mm brass connections, 15mm gm wheel valve, 15mm brass nipple ( 2 nos. ) , 15mm nylon connection, tw plugs, screws and also giving necessary connection to the pvc pipe including cost of 600mm length of 110mm dia pvc pipe and painting the ci brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re doing the dismantled masonry to original condition etc. complete complying with standard specifications. ( the ewc and flushing tank wiht all accessories should be got approved by the executive enginer before use on works ) , supplyingandfixingin position best approvedof bis quality 110mm p.v.c rainwaterdownfallpipe having a pressure of 4kg / sq.cm including cost of necessary pvc shoe, pvc bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the rcc roof slab including finishing neatly etc, complete. the rate shall be inclusive of cast of removable cast iron grating. the pvc pipe shall be fixed in wall with special type of uclamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc, completecomplyingwithstandardspecifications. , conducting geophysical survey, quality and quantity test and transportation charges etc, ( this includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist ) , drilling150 mmdiaborewellin hard rock areas anywhere in the state inculding transportation to site of work in hardrock areas inculding labour charges for insertion of ms casing pipe and flushing of borewell and for minutes. , upto 150m below g.l. , from151m 180 m , from181m 210 m , from211m 240 m , supply and delivery of unplasticised ribbed screen pvc casing pipe of the 150mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per is / 12818 / 92 and as amended from time to time to suit the borewell upto 80m depth ( c.s ) with isi marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete.twad page no : 22 , supplyanddelivery of three phaseof50 lpm175 mtr head submersible pumpset of motor isi / isowith threephase panel board with two level guard and auto startas per isi specificationsincluding all cost and conveyance to site etc., complete , three phaseof50 lpm175 mtr head submersible pumpset twad page no : 98 , supply and delivery of three phase panel board star delta with two level guard and auto start suitable for submersible pumpsets and accessories including all fittings suitable for submersible pump sets.panel board should be provided as per specification. rates inclusive of packing, loading, freight, unloading, stacking, transit andinsurance charges etc, complete twad page no : 110 , supply and delivery offollowing 50 mm dia upvc column pipe and gi pipes and other special materials of good quality includingcost of materials and labour with cost for coveyence to site etccompletecomplyingwith standardspecifications. etc., , 50mm dia upvc column pipe twad page no : 24 , 50mm upvc . elbow pwd page no : 107 , 50mm upvc . union , 50mm upvcbend , 50mm gate valve twad page no : 45 , 50mm gm n.r.v twad page no : 45 , 50mm pvc mta twad page no : 27 , 50mm end pvc cap pwdpage no : 100 , 50mm dia gi flange set twad page no : 44 , 50mm m.s. clamp set twad page no : 44 , supplying and fixing of pvc insulated and sheathed 3 core 4sq.mm flat type copper cable cofirming to is 694 / 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification. twad page no ; 116 , labour charges for the erection of 50 lpm175 mtr head submersible pumpsetin borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tnicn switches starter, voltmeter, ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables andtwin earthing as per ie rules., complete and testing the pumpset and trail run for 10 days. twad page no287 , supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete. , 32 mm dia, pvc pipe , 20 mmdia, pvcpipe , 32mm pvc.elbow , 32mm pvc. bend , 32mm pvc. tee , 32mm pvc. end cap , 20mm pvc. bend , 20mm pvc.elbow , 20mm pvc. tee , 32mmx20mm pvc.reducertee , suppling and fixing in position15mm.diameter pvc screw down tap ( heavy duty ) of approved make conforming to i.s.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary. , supplying and fixing in position first quality and approved variety of 32mm gun metal gate valve ( heavy type ) with i.s.i.mark of the following sizes including cost of shellac , thread etc, .including labour for cutting and threading of g.i.pipes etc., complete complying with standard specifications for both internal and external water supply arrangements. , supplying and fixing positionpvc nahani trap ( pvc nahani trap of size 100 x 75mm ) with stainless steel gratings with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( one part of lime, two part of sand and five part of 40mm gauge brick jelly ) and finished with cement mortar 1:3 ( one cement, three sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the ci / pvc pipes, etc., complete complying with standard specification. ( the nahani trap should be got approved by the executive engineer before use on works ) , supplying and fixing in position best quality 110mm dia p.v.c soil / waste pipes ( 6ksc ) with specialshaving isi mark and providing leakproof joints including fixing to the wall with p.v.c / m.s clamps etc., and making connection to all sanitaryfittings, dismandling masonry / r.c.c. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. , 110 mm dia pvc pipe , 110 mm dia pvc ellbow , 110 mm dia pvc tee , 110mm dia pvc door elbow pwd pg.no:102 , 110mm dia pvc door tee , 110mm dia pvc door yee , 90 mm dia pvc pipe , 90mm dia pvc elbow , 90mm dia pvc tee , 90mm dia pvc door elbow pwd pg.no:102 , 90mm dia pvc door tee , 90mm dia pvc door yee , supplying and fixing of 2000 liters capacity hdpe tank with is specification is 10701 / 96 the tank is meant for outdoor ( or ) indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all pvc specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.the rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. ( the water tank should be got approved by the eebefore use on work. twad page no ; 85 , supplying and fixing in position c.i.manhole covers ( light or heavy duty ) of 600 x 600mm in size of best approved quality and as per standard specifications etc., complete. , supplying and fixing pvc ventilating shaft of 110mm dia ( having working pressure 4 kg. / sq.cm ) with 3 metre height including cost of pvc cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers , supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 x 450mm wth necessary plastic back, pvc frame with bottom stand of approved colour with brass screws, rawal plugs etc., complete complying with standard specifications. , supplying and fixingbest approved quality brass c.p / al anodised towel rail 600mm. long and 20mm diameter with brackets of same material including cost of teak wood plugs and c.p.screws etc., complete complying with standard specifications , supplying and fixing best approved quality c.p.soap tray of size 150mm x 100mm including cost of teak woodplugs, brass screws complete complying with standardspecifications. , supply and laying of3.5 x 35 sq.mm pvc armoured ltugcable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt.layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.twad page no ; 116 , wiring with 2 x 1.5 sqmm ( 22 / 0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t. switch with continuous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable colour for pvc concealed light point / fan point ( for electronic regulator ) . etc, complete as per standard specifications. sd 24 , wiring with 2 x 1.5 sqmm ( 22 / 0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 150 x 100 x 113 mm tw switch box with 3mm hylum sheet cover for5a 3 pin non inter locking cs plug with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed pvc plug point.etc, complete as per standard specificationssd 38 , wiring with 2 x 4sqmm ( 56 / 0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 150 x 100 x 113 mm tw switch box with 3mm hylum sheet cover for15a 3 pin non inter locking cs plug with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed pvc power plug point. etc, complete as per standard specifications. sd 40 , supply and run of 2 of 1.5 sqmm ( 22 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour.etc, complete as per standard specifications sd 54 , earthing as per p.w.d. standard with an earth electrode of 2mtr. class b gi pipe of dia not less than 32mm complete with necessary masonry work. etc, complete as per standard specificationssd 234 , supply and fixing of 3 phase 4 wire 4 way icdb of 32 a per way with 100 a tpn mc switch with suitable trunking box ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection etc, complete as per standard specificationssd. 175 , supply and fixing of horizontal type 4 way triple pole neutral mcb distribution board in sheet steel enclosure with 40 a 4 pole mcb isolater as incoming and 12 nos. 6a to 32 a sp mcb as outgoing in flush with wall and making good of the concealed portion with earth connection. the mcbdb and mcbs should be with the isi mark etc, complete as per standard specificationssd.179 , supply and run of 2 of no.8 swg gi wire for guarding with cradle with no.8 swg gi wire at the equal interval of 1.5m etc, complete as per standard specifications sd.75 , supply and run of 4 x6 sq.mm ( 84 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade on 7 / 20 gl bearer wire for service connection mains etc, complete as per standard specifications.sd 68 , supplying and laying of pvc insulated, pvc sheathed, armoured, ltug cable of size 2 core 10 sqmm al.cable clamped on walls ( sd 210 ) , supplying and fixng of cable gland and termination with earth connection of size 2 core 10 sqmm etc, complete as per standard specification. ( sd 182 ) , supply and fixing of tneb board suitable for 3 phases 63a service connection made up of suitable angle iron frame work of size 2 feet x 1 1 / 2 feet using angle iron of size 1 1 / 2 x 1 1 / 2 x 1 / 4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1 / 2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 nos 63a fuse units ( 500v ) 1 no. neutral link, copper earth flat of size 1 x 1 / 4 with inter connection of eb meter to fuse units by 7 / 16 pvc insulated copper wire with earth connection complete.sd 129 , supply and fixing of 32 a tpn mc switch on incoming and 3 nos 32 a dpmc switch ( front handle ) as outgoing with suitable adoptor box with suitable ms cable entry box trunking boxes and internal connections on internal connections on suitable ai frame work with earth connection etc, complete.sd 172 , supply and fixing of 3 phase 4 wire 4 way icdb of 16 a per way with 32 a tpn mc switch with suitable ms cable entry boxes trunking box and internal connections on suitable angle iron frame work with pwd earthing etc, complete.sd 173 , earthing as per the isi specification with an earth electrode of 2.1mt class b gi pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm rcc cover slab for the brick masonry . sd 233 , supply and run of 2 of 4sqmm ( 56 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14swg cuwireand making good of the concealed portion with suitable colour ( sd57 ) , supplying and laying of 3½ x 50 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ sd 200 ] , supplying of 4 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ sd 196 ] , supplying and fixing of single box type 2 x 20 w led light fitting complete with electronic choke and teakwood round blocks on wall or ceiling with fluorescent tube with pvc unsheathed copper leads from terminals to the fitting. [ twad sor electrical page no ; 173 sl. no : 15b ] , supplying and fixing of 1200mm ( 48 ) sweep ac ceiling fan complete with regulator with 1m down rod including s & f of fan clamp with side plates and cross arm etc, complete as per standard specifications sd 107 , supply and fixing of 300mm ( 12 ) sweep ac exhaust fan complete with necessary wall opening and making good of the wall.etc, complete as per standard specifications. sd 115 , brick lining for 300mm thick in furance roof fibre li 2800l x 900w x 700h in mmning chamber size, door operation : up & down movement manual operated max operating temparature : 700 900 dec celsius. etc, complete. , lpg burner set with lpg bank $ control panel: supply of 4 nos, 5 burner with blower and fully auto control system like 0, 000 kcal capacity lpg fired ignition, flame sensor and auto cut off incorperated in a separate sequencecontoller equivalent to imported contol system for air and lpg with auto igniting system and supply of 20 + 20 cylinder bank with pipeline from lpg cylinder bank up to each burner end by using tata c class grate material pipe with required material etc, complete , 3 hp motor 2no.for use to id fan & 1hp motor use for wet scrubber wet scrubber for gas cleaning system: the system should be enhanced with stainless steel cylinder and ss id fan ( 3hp motor x 2nos. with isi standard ) to avoid rusting, volume of water should be increased for effective scrubbing. , guy supported chimney: this is a cylindrical type ms is 2062 quality, 8mm plate chimney with two coasted of aluminium heat resistance paint exrernally, 7000 mm, long bottom cylindrical chimney. it is rested on 16mm type ms is 2062 qyality ( 100 feet thick base flange and stool flange 16mm thick with 12mm gusset support, cylindrical chimney mounted on foundation 12nos x 25mm dia bolt, nut joints, top 1 cylindrical shell boiler quality 8mm plate x 7000mm long base chimney. it is rested 50mm width base flange & wind forece curtain ms flat set, with lightening arrestor 25mm x 3mm copper flat earthing, with easy hinges type manual opened manhole door, necessary for pollution control boardmonitoringm sample ports arrangment ladder assembly with safety guard set 70 feet full height, one sets of detachable platform, over all size: 800mm dia x 400mm dia x 21000mm length with necessary all arrangements etc., complete , erection, testing and commissioning charges for gasifier etc, complete , supply, delivery, errection, testing and comissioning of 62.50kva generatorwith auto main failiure panel ( amp ) three phase out put voltage 415v consisting of diesel engine capable of delivery continious break gradial fitting water cooled radiclous assessory classes as per standad specificatons pwd sor page no: 146 sl.no; 10a , supply delivery and filling of brick jelly 20mm size with standard specification including cost and conveyance of jelly at site and all labour charges and all other incidential charges etc., complete as per standard specification. , supply delivery and filling of40mm size hbg stone with standard specification including cost and conveyance of jelly at site and all labour charges and all other incidential charges etc., complete as per standard specification. , supply delivery and filling of20mm size hbg stone with standard specification including cost and conveyance of jelly at site and all labour charges and all other incidential charges etc., complete as per standard specification....

Indian Rare Earths Limited - Tamil Nadu

32888076 1 dismantling and removal of r.r. masonry sl.no.1 of scope of work dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of engineer in charge. 2 2 dismantling and removal of rcc foundation sl.no.2 of scope of wok dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m etc., complete as per the direction of engineer in charge. 3 3 earthwork excavation sl.no.3 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 200m and lift upto 2m including refilling etc., complete as per the direction of the engineer in charge. 4 4 supplying, providing and laying pcc 1:4:8 sl.no 4 of scope of work supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 5 5 supplying, providing and laying pcc 1:2:4 sl.no.5 of scope of work supplying, providing and laying pcc 1:2:4 mix for foundation / flooring work / kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 6 6 supplying, providing & laying rr masonry sl.no..6 of scope of work. supplying, providing & laying rr masonry foundation / wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the engineer in charge. 7 7 supplying, providing and laying dry rubble masonry sl.no.7 of scope of work supplying, providing and laying dry rubble masonry for soak pit for construction of wall using hard blue granite stone, etc. complete as per standard specifications and as directed by the engineer in charge. 8 8 supplying, providing and laying brick masonrysl.no.8 of scope of work supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 9 9 supplying, providing and fixing twisted reinforcement is 1786 hysd sl.no 9 of scope of work supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d / fe550d ( tmt bars tata / agni / jsw ) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction engineer in charge including binding, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specification and as per the direction of engineer in charge. 10 10 supplying, providing and laying cement concrete 1:1.5:3 for rcc works sl.no 10 of scope of work supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, complete as directed by engineer in charge. 11 11 supplying, plastering with cm 1:4 mix 15mm thick sl.no 11 of scope of work supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 8m height with neat finishing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineer in charge. 12 12 supplying, plastering with cm 1:3 mix 12mm thick sl.no 12 of scope of work supplying, plastering with cm 1:3 mix 12mm thick one coat floated hard & trowelled smooth for rcc beam, column, ceiling upto 8m height with neat finishing and necessary grouting, etc. including all scaffolding, etc. complete complying with standard specifications and as directed by the engineer in charge. 13 13 supply of paints and painting two coat with emulsion paint sl.no.13 scope of work supply of paints and painting two coat with emulsion paint ( asian / berger / nippon ) 1st quality of approved shade over a coat of cement primer for the external / internal masonry surface upto 10m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying putty touch up works wherever required, etc complete as per specification and as per the direction of engineer in charge. 14 14 supplying, providing and laying with 10mm thick vitrified tiles sl.no.14 of scope of work supplying, providing and laying with 10mm thick vitrified / marbonite double charge tiles of size 600mmx 600mm johnson / kajaria / somania brand with cement mortar 1:2 and pointing including finishing the joint and pointing flush with the surface, etc. complete as directed by engineer in charge. 15 15 providing and fixing 18 20mm thick jet black sl.no.15 of scope of work providing and fixing 18 20mm thick jet black / coffee brown / tan brown granite slab for wash basin / kitchen / store room area including grinding & finishing the ends with half round and closing the joints with matching colour cement and polishing the slab to smooth finish, etc, complete as directed by the engineer in charge. 16 16 supplying, providing and fixing of 2 leaf ms gate sl.no.16 of scope of work supplying, providing and fixing of 2 leaf ms gate of required size consisting of ms angle i.s.a. 40x40x 6mm allround and for middle, horizontals and cross diagonals and covered with aluminium chequered plat 2mm thick ( jindal / hindalco ) with bolted / riveted joints and hinges arrangement including providing ms kondy and locking arrangements and painting the gate with two ( 2 ) coats of enamel paint ( berger / asian / nippon ) over a coat of zinc chromate primer ( berger / asian / nippon ) etc. complete as per specification and as per the direction of the engineer in charge 17 17 supplying, providing and fixing of gi c class heavy hollow tube hand rail sl.no.17 of scope of work supplying, providing and fixing of gi c class ( heavy ) hollow tube hand rail of approved size of steel ladder railing, balcony railing, staircase railing and similar works, including painting with two ( 2 ) coats of enamel paint ( berger / asian / nippon ) over a coat of zinc chromate primer ( berger / asian / nippon ) and cutting, welding, grinding, conveyance, electrical charges, etc. complete as per the specification and as per the direction of engineer in charge. 18 18 supplying, providing and fixing m.s. grills sl.no.18 of scope of work supplying, providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars including painting with two ( 2 ) coats of enamel paint ( berger / asian / nippon ) over a coat of zinc chromate primer ( berger / asian / nippon ) and cutting, grinding, conveyance, welding charges, electrical charges, etc. complete as per the specification and as per the direction of engineer in charge. 19 19 supplying, providing and laying 20 / 25mm sl.no 19 of scope of work supplying, providing and laying 20 / 25mm cpvc astrol / ashirvad pipes 20 20 supplying, providing and laying 20 / 25 / 32mm id pvc pipe sl.no 20 of scope of work supplying, providing and laying 20 / 25 / 32mm id pvc finolex / ashirvad / astral superthick pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction of engineer in charge. 21 21 supplying, providing & laying 40 / 50 / 63mm id pvc pipe sl.no.21 of scope of work supplying, providing and laying 40 / 50 / 63mm dia id pvc finolex / ashirwad / astral superthick pipes including all specials such as bend, elbow, reducer, tee, solvent cement etc. complete as per the direction of engineer in charge. 22 22 supplying, providing and laying 110mm dia id pvc pipe sl.no 22 of scope of work supplying, providing and laying 110mm dia id pvc finolex / ashirwad / astral ( 6kg ) pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction of engineer in charge. 23 23 supplying, providing and fixing bib tap / piller tap sl.no 23 of scope of work supplying, providing and fixing the cp sanitary fittings: bib tap / pillar tap as per the direction of engineer in charge. 24 24 supplying, providing and fixing parryware wall hung basin sl.no 24 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware duke wall hung basin, colour: white wash basins with necessary accessories ( waste coupling, waste hose, etc. ) as per the direction of engineer in charge. 25 25 supplying, providing and fixing the cp & sanitary fittings brass ball wall sl.no.25 of scope of work supplying, providing and fixing the cp & sanitary fittings: 20 / 25mm brass ball valve of heavy type including fixing, etc. as per the direction of engineer in charge. 26 26 supplying, providing and fixing 500 ltrs. water tank sl.no 26 of scope of work supplying, providing and fixing 500 ltrs. capacity sintex water tank with all inlet and outlet pipe fitting arrangements and 20mm brass float valves, etc., complete as per the direction of the engineer in charge. 27 27 supplying, providing and fixing the cp & sanitary fittings angle cock sl.no.27 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware angle cock as per the direction of engineer in charge. 28 28 supplying, providing, laying & fixing electrification concealed point sl.no.28 of scope of work supplying, providing, laying and fixing electrification concealed ( polythene pipe ) point with required wire ( make: finolex / havells / polycab ) , switch box, switches ( make: polycab / havells ) with all required necessary fittings including chipping, routing, clamping and all other incidental charges, etc. complete as per the specification and as per the direction of engineer in charge. 29 29 supplying, providing and fixing of exhaust fan 375mm sl.no.29 of scope of work supplying, providing and fixing of exhaust fan 375mm ( 15 ) sweep ( heavy duty ) with all required necessary fittings etc. complete as per the specification and as per the direction of engineer in charge. 30 30 fitter for miscellaneous works sl.no.30 of scope of work fitter for miscellaneous works such as dismantling the exiting steel structural / roof sheet etc. as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) 31 31 engagement of labour sl.no.31 of scope of work engagement of labour ( mazdoor ) for miscellaneous work directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

Airports Authority Of India - Tamil Nadu

32856463 maintenance repair to runways at chennai airport, chennai during the year 2022 23 sh: supply of runway marking retro reflective paints, emulsion paints and reflective glass beads etc...

Airports Authority Of India - Tamil Nadu

32855573 maintenance repair to runways at chennai airport chennai during the year 2022 23 sh supply of runway marking retro reflective paints emulsion paints and reflective glass beads etc civil works...

Chennai Petroleum Corporation Limited - Tamil Nadu

32849887 rate contract for projects related civil works at manali refinery of cpcl rate contract for projects related civil works at manali refinery of cpcl , cutting & clearing the areaof grass,rank,vegetation,wild growth bushes,trees and plants upto 30cm girth measured at a height 1.0m above ground leveletc, including removal of rubbish, grass, plants, bushes, by cutting it, removing completely as per directions of engineer in charge and collecting all cut grass, vegetation etc and disposing it atdesignated place upto 7 km lead outside the refinery premises(vaikkadu village) with all tools, labour etc. complete as per specfications and directions of engineer in charge. , cutting trees of girth above 30 cm upto & including 60cm (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots up to min 1.5m depth from the ground level, with all labour, tools & tackles, etc. completeand disposal of unserviceable material atdesignated place upto 7 km lead outside the refinery premises(vaikkadu village )as per specifications and as directed by the engineer in charge. , cutting trees of girth above 60 cm upto & including 120cm (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots up to min 1.5m depth from the ground level, with all labour, tools & tackles, etc. completeand disposal of unserviceable material atdesignated place upto 7 km lead outside the refinery premises(vaikkadu village )as per specifications and as directed by the engineer in charge. , cutting treesofgirth above 120cm upto & including 240cm (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots up to min 1.5m depth from the ground level, with all labour, tools & tackles, etc. completeand disposal ofmaterial atdesignated place upto 7 km lead outside the refinery premises in vaikkadu area as per specifications and as directed by the engineer in charge. , cutting treesofgirth above 240cm (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots up to min 1.5m depth from the ground level, with all labour, tools & tackles, etc. completeand disposal ofmaterial atdesignated place upto 7 km lead outside the refinery premises in vaikkadu area as per specifications and as directed by the engineer in charge. , earthwork in excavationinall types of soil ,includingsoft or hard murrum, but excluding soft and hard rock, using mechanical means(hydraulic excavators) / manually for depth upto 1.5m,including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated/sub soil water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes,sewage pipes, electricunderground cables, etc.all complete as per the specifications and directions of engineer in charge. , sameassl. no. 60 abovebutfor depths beyond 1.5m upto 3.0m. , excavating trial pits manually of required size & depth upto 3m at locations as specified with necessary shoring, dewatering & backfillingas required, etc. complete as per specifications and as directed by engineer in charge. , backfilling after execution of the work toproper grade and level with selected materials from available excavated soil fromsoil heaps within a lead of 100m,including re excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 150 mm,watering, rolling and ramming by manual methods/mechanical compactors , dressing, trimming etc. in foundations, plinths,pits etc.all complete as per directions of engineer in charge. , transporting & disposing the surplus earth & debris including shrubs and vegetations from construction area (beyond the initial lead of 100m) to the designated area outside the refinery premises up to a lead of 7km (vaikkadu village) including re excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths & heights, stacking, levelling and dressing both areas (viz., from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directedby engineer in charge.( note: if measured by stacks 30%voids will be deducted.) , transporting & disposing the surplus earth & debris including shrubs and vegetations from construction area (beyond the initial lead of 100m) todesignated areas within the refinery premises including etp/ttp areasup to a lead of 3kmincluding re excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths & heights, stacking, levelling and dressing both areas (viz., from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directedby engineer in charge.( note: if measured by stacks 30%voids will be deducted.) , supplying and filling approved quarry dust of specified quality under floors, plinths,etc. for all depthsincluding the cost of quarry dust, labour charges,tools and tackles,royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layer not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/ or other equipment to specified levelall complete as perspecifications and directions of engineer in charge. , collection of scrap (metal/steel scrap) from anywhere within the refinery premises including supply of necessary vehicles with driver,required labour,loading and unloading etc.and handing over the materials to scrap yard within the refinery premises with all tools and tackles,manpower etc.all compelte as directed by engineer in charge. , supplying and filling approved m sand of specified quality under floors, plinths, foundations etc. for all depthsincluding the cost of sand, labour charges,tools and tackles,royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layer not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/ or other equipment to specified levelall complete as perspecifications and directions of engineer in charge. , providing and laying plain cement concrete (pcc)1:4:8 by volume(1cement : 4 m sand:8 coarse aggregate) with opc 53 grade and 40mm & down size graded crushed stone aggregates for all depths wherever required like in foundations, fillings ,floors,pavements & ramps or any other works etc., including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete including cement cost etc, all complete as directed by engineer in charge. , same as sl.no: 150 above,but for plain cement concrete (pcc)1:1.5:3 , providing and laying of reinforced cement concrete (rcc) 1:1.5:3 by volume (1cement: 1.5 m sand:3 aggregate) with opc 53 grade and 20mm and down size graded crushed stone aggregate materials for sub structure upto plinth beam levelfor all depths including pavement, machine mixing, curing, consolidating with vibrator, cement cost etcall complete as per instructions of engineer in charge excluding cost of shuttering and reinforcement. , same as sl.no: 170 above,but for super structure at all heights above plinth beam level. , providing,fixing formwork including centering, shuttering ,strutting and propping in sub structure at all depths wherever required including removal of the shuttering after the specified period is over and as directed by the engineer in charge complete with all materials, labour, consumables etc.(form work shall be supplied by the contractor and shall remain the property of the contractor) , providing, fixing formworkincluding centering, shuttering ,strutting and propping insuper structure at all heightswherever required including removal of the shuttering after the specified period is over and as directed by the engineer in charge complete with all materials, labour, consumables etc.(form work shall be supplied by the contractor and shall remain the property of the contractor) , providing, hoisting and fixing in position rcc precast elementswithreinforced cement concrete grade 1:1.5:3 (1 cement:1.5 m sand: 3 graded stone aggregate withwith opc 53 grade and 20mm & down size graded crushed stone aggregates)for all leads, levels, shapes and thickness including all moulds, shuttering and centering, vibrating, tamping, curing, chamfering, providing lifting hooks,levelling, aligning and fixing/laying in position using crane, breaking brickwork and /or concrete surfaces and making good the same etc. all complete (excluding cost of reinforcement) and as directed by engineer in charge. all material including cementto be supplied by the contractor. , supplying, fabricating and placing in position high strength deformed steel bar reinforcement(conforming to is 1786, grade fe500) for rcc work, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractors own 16 standard wire gauge(swg) black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, overlaps, welding spacers, lifting hooks etc for all heights & depths etc. removing of scraps from site, all complete as directed by engineer in charge. , grouting pockets, holes, pipe sleeves of any shape or size, column bases, machine bases etc.using non shrink grout of approved make equivalent including supply of material,roughening surface, cleaning with compressed air/water jets, ramming, curing,labour charges etc.all complete as directed by engineer in charge. , providing & fixing in position bitumen impregnatedboard 12 mm thk. of approved make premoulded bituminous expansion joint filler boards conforming to is:1838 p1/1983 in joints including application of primer as directed by engineer in charge. , providing & filling in joints bitumastic sealing compound 12 to 17mm width x 20 to 25 mm depthofapprovedmake conforming to is:1834 latest revision grade a including one coat of primer as per manufacturer’s specifications, drawings & as directed by engineer in charge. , providing and laying coping block with cement concrete 1:2:4with 12.5mm & down size graded crushed stone chip aggregates on top of masonry wall including providing pockets, openings, recesses, chamfering wherever required, tamping, curing and rendering if required to give a smooth and even surface etc. for all heights in any shape, profile, position and thickness etc. all complete as directed by engineer in charge. , providing and laying brick masonry in sub structure with bricks ofclass 5.0 in cement mortar 1:5 (1 cement:5 m sand)for all depths including the cost of materials, labour,tools and tackles, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing recesses, finishing the joints flush below ground level , curing, etc. all complete as per specifications, and as directed by engineer in charge. , providing and laying brick masonry in super structure with bricks of class 5.0 in using cement mortar 1:5 (1 cement:5 m sand)for allheightsincluding the cost of materials, labour,tools and tackles, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape and size, sealing the gap between masonry and soffit of beam/slab, embedding the fittings,curing, etc. all complete as per specifications, and as directed by engineer in charge. , providing and laying half brick masonry in cement mortar 1 : 4 (1 cement : 4m sand) for all depths and heightsincluding cost of materials, cement, labour, scaffolding, sampling, testing, supplying and placing 2 no. 8 mm dia. diarebars at every fourth course, sealing the gap between masonry and soffit of the beam / slab, embedding the fittings and fixtures, curing, etc. all complete as per specifications, and as directed by engineer in charge. note: the cost of reinforcement shall be paid seperately under relevant items. , providing random rubble masonry with hard stone in sub structure with cement mortar 1:6 (1cement:6 m sand) for toe wall , including the cement cost , tools & tackles, labour required to complete the job, rendering the full face with 1:3 cm as per the specifications and directions of engineer in charge. , same as item no:300 above ,but for superstructure. , providing&laying dry rubble soling (hard core) with 20 to 40 mm size metal, under foundations/ ground floor slab (grade slab) etc., including filling recesses by grit, stone chips & approved murrum, watering, dressing, compacting with mechanical compactors etc., complete as per drawings, specifications and as per thedirections of engineer in charge. , providing 15mm thick cement plasterin cement mortar 1:4(1 cement:4 m sand by volume) onbrickmasonry, pcc/rcc surfaces including preparation of base, cleaning, chipping, packing of electrical, plumbing works, scaffolding if required, finishing, curingincludingmouldings and providing grooves in plaster,bands ,mouldings etc. as specifiedfor all depths and heights including labour charges,tools and tackles,material costs etc. as per specifications and asdirected by the engineer in charge. , providing 12mm thick cement plasterin cement mortar 1:4 (1cement:4 m sand by volume) onbrickmasonry,pcc/rcc surfacesincluding preparation of base, cleaning, chipping ,packing of electrical,plumbing works ,scaffolding if required, finishing, curingincludingmouldings and providing grooves in plaster,bands ,mouldings etc. as specifiedfor all heights including labour charges,tools and tackles,material costs etc. as per specifications and asdirected by the engineer in charge. , providing 6mm thick cement plaster in cement mortar 1:3 (1cement:3 fine sand by volume) on roof ceilings, concretesurfaces including preparation of base, cleaning, chipping, packing of electrical works,scaffolding, finishing, curing etc.for all heights complete with all labour charges,material costs,tools and tackles etc.as per specifications and as directed by the engineer in charge. , providingandapplying two coats ofinterior paint of interior emulsion paint with wall putty of birla white/jk white or any other approved equivalent make of any shades/coloursover one coat of emulsion primer asper the specifications includingnecessaryscaffolding and surface preparation, filling all holes, cracks and depressions with wall putty,sand paperingetc., complete as per specification and as directed by engineer in charge. , supplying and applying two coats of exterior emulsion paint of asian or any other equivalent approved brand of required shade and includingsurface preparation, a priming coat with emulsion primer of approved brand as same as final coat including cleaning, removing dust, filling all holes, cracks and depressions with wall putty of birla white/jk white or any other approved equivalent make, necessary scaffolding etc, etc all complete as per specifications and directions of engineer in charge. , providing and applying 3 coats of white wash of approved make and shade for all depths and heights including cleaning, preparation of surfaces, curing etc with all labours, tools, tackles, scafolding etc. complete as directed by engineer in charge and as per specifications. , providing and applying two coats of water proof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces, priming coat with cement primer,curing etc. all complete as per directions of engineer in charge. , providing recessed pointing onrandom rubble masonrywall for all heights with cement mortar 1:3(1cement:3 m sand) including scaffolding/staging, finishing, curing, etc.allcomplete as specified and directed by engineer in charge. , providing and fixing 18mm thick machine cut, mirror polished, premoulded and pre polishedgranite for platformsof approved qualityfor shelves of required size of approved shade, colour, and texture laid 20mm thick base cement mortar 1:4 (1 cement:4 msand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including machine polishing to edge to give high gloss finish,curing, moulding & nosing etc. complete at all levels as directed by engineer in charge. , providing and fixing 20mm thick machine cut,polished cudappah slab of approved qualityfor kitchen sinks of required size of approved shade, colour, and texture jointed with white cement, mixed with matching pigment, epoxy touch ups, including machine polishing to edge to give high gloss finish, for fixing as kitchen sink, rubbing, curing, moulding & nosing etc. complete at all levels as directed by engineer in charge. , providing and laying vitrified floor tiles of 600mmx 600mmof stain guard1st class quality ofapproved makelaid on 20mm thick cement mortar 1:4 (1 cement:4 m sand) , including a coating of adhesive as per manufacturers specifications, flush pointing of joints of tiles with cement paste, grouting with white cement and pigment with colour matching the shades of tiles including skirting, finishing ,curing ,material costs,labour charges,tools and tackles etc. all complete as directed by engineer in charge. , providing and laying of premium quality antiskid ceramic floor tiles (size of all tiles shall be 300x300) ofapproved make floor matt finished colour, nonslip, decorative type of tiles, approved make with bed of 20mm thick cement mortar 1:3 in line and level including cleaning the finished surfaces with oxalic acid including skirting out the joints, flush pointing of joints of tiles with cement paste/grout mixed with colour pigments matching the shade of tiles, with material costs,tools and tackles,labour charges etc.as per specifications, standards and instructions of engineer in charge. , providingand laying upto300 x 450 mm size coloured glazed ceramic tiles for wall/dado(grade i quality), of approved make & shade including 20 mm thick cementbedding c.m. 1:3, pvc beading with matching colour , pointing and finishing exposed joints with white cement/matching colour pigment,etc., including cleaning the finished surface with wax polishing complete with material costs,tools and tackles,labour charges as perspecifications and as directed by engineer in charge. , providing and laying pvc roll/tile of approved shade,texture of 2mm thickness homogenous, unbaked,flexible,anti static pvc tiles conforming to bs 2050 table 2, is 3461/3462 in floor,skirting,fixed over base floor/surface by means of a continous coating of rubber adhesive ( as per manufacturer specification) overthe base floor/surface including cleaning the finished surface with approved detergent to remove stains etc. all compelte as directed by engineer in charge.removal of damaged existing membrane to be carried out if required. , providing & forming40mm thick average hard wearing surface with granolithic concrete floor finish (1:1:2) laid in 2.5 m x 2.5 m panels by means of necessary formwork over concrete floor includingmaterials,labour,tools,tackles etc. all complete as per specification, drawings & as directed by engineer in charge. , providing asbestos free everest hitech or equivalent6mm thick corrugated cement sheet roofing in natural stone grey colour and fixing with high corrosion resistant self drilling fasteners and epdm washers by replacing the existing worn out sheet etc. complete ; including cutting to size and shape ,providing laps,scaffolding etc.with all labour,tools as directed by engineer in charge. , providing asbestos free everest hitech or equivalentserrated adjustable ridges for roofing including fixing with accessories like high corrosion resistant self drilling fasteners/epdm washers and or g.i. seam bolts and nuts, g.i. plain and bitumen/ washers including cutting to proper size , scaffolding, etc., for all heights with all labour,tools & tackles complete as directed by engineer in charge. , providing asbestos free everest hitech or equivalentgutterof 600mm overall girth semicircular in shape for roofing including fixing with necessary slope with accessories likegutter guards, clamps,brackets,high corrosion resistant self drilling fasteners/epdm washers and or g.i. seam bolts and nuts, g.i. plain and bitumen/ washers including cutting to proper size , scaffolding,providing provision for fixing rain water downtake pipe etc., for all heights with all labour,tools & tackles complete as directed by engineer in charge. , supplying, transporting, fabricating, erecting and fixing in position colour coated corrugated galvalume sheet of 0.45mm base metal thickness , with colour coating including fixtures, bitumen washers, corner pieces, all necessary accessories, scaffolding etc. complete in all respects at all levels, locations and as perspecifications and direction of engineer in charge. , providing & laying to required slope cement concrete screed of mix 1:1.5:3 (1 cement : 1.5 m sand: 3 coarse aggregates 12.5mm and down graded aggregates) using 53 grade opc inroof terrace etc. laid to required slope and thickness & inclusive of curing/pond curing, brooming with wire brush, finishingetc.all labours, tools and tackles complete as per drawing, specification & as directed by engineer in charge. , providing and laying cool roof s.r.i (solar reflective index)tiles of johnson endura or approved equivalent ,size 300mmx300mm ,white in colour with thickness not less than 10mm, on terraces jointed with suitable cementious water proof grout, laid over suitable tile fixing mortar as per manufacturers specification with required slope, thickness and finishing neat including pointing etc. complete with all tools, tackles, equipments, labour, cement cost etc. as per specifications and as directed by engineer in charge. , providing and laying first quality pressed clay tiles( as per approved pattern not less than 18 mm thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 msand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement: 4 m sand) and finishing neat including all tools, tackles, equipments, labour,materials,hacking of concrete,necessary surface preparation,pointing with cement mortar 1:4 mixed with 2 % integral water proofing compound , etc.whereever required , complete as per specifications and as directed by engineer in charge. , providing and fixing white glazed earthenware china wash basin of make parryware/hindware with antisplash rims on 3 sides of 550x450mm sizeincluding approved cast iron/ms brackets , one 15mm dia. cp brass pillar cock, rubber plug with cp brass, 32mm cp waste fitting of standard pattern pipe with 32mm dia. pvc pipe with bottle trap, cutting wall, floors and making good the same, painting all exposed metallic surfaces with 2 coats of approved shade and quality synthetic enamel paint overred oxide zinc chromate(approved quality) making all connections, finishing etc. all complete as directed by engineer in charge. , providing & fixing white glazed earthernware indian pan type water closetof parry ware orrissa or approved equivalent of size 580x440 mm with integral footrest,includingall fittings, p or s traps, cutting walls, floors making good of same, finishing, soldered joints, making inlet/outlet connection, providing min. 150 mm thick sand cushion, finishing, etc.all complete as directed by engineer in charge. , providing & fixing white wall hungeuropean water closet (ewc) with dual flush cistern of parry ware or approved equivalent make including cistern, cistern lid, antimicrobial seat cover with lid, fitting,slim line health faucet with hose & hook, other standard accessories, all fittings and fixturesincluding cutting walls, floors making good of same, making inlet/outlet connection, finishing, etc.all complete as per the directions ofengineer in charge. , providing & fixing white floor mounted european water closet (ewc) with dual flush cistern of parry ware petitieor approved equivalent make including cistern, cistern lid, antimicrobial seat cover with lid, fitting,slim line health faucet with hose & hook,bibcock andother standard accessories, all fittings and fixturesincluding cutting walls, floors making good of same, making inlet/outlet connection, finishing, etc.all complete as per the directions ofengineer in charge. , providing and fixing white glazed earthern ware half stall urinal of parry ware niagara orapprovedequivalent, including parryware brand or approved equivalent cp urinal push angle valve, cp brass spreader with 32 mm dia pvc pipe, tee, distribution pipe, brackets etc. making inlet & outlet connections fixing with cp brass screws, finishing, etc. all complete as directed by engineer in charge. , providingandfixing in position white glazed earthern ware vitreous chinadivisional platepartition for urinals of size 350x675x130mmparryware magnum or approved equivalent placedbetweenurinalsanchoring and fixing the divisional plate with fastners and required clamps / fittings, making good of all damaged work, finishing etc., all complete as per specification and as directed by engineer in charge. , providing and fixing20 mm nominal outer dia.sch 40 unplasticised poly vinyl chloride(upvc) pipes, of approved equivalent make with ms holder clamps including fixing/embedding into masonry/concrete, providing connections like shoes, vents, specials, bends etc. fixing in perfect plumb,spacing of jumpers shall be minimum 1mc/c etc. all complete including jointing with bonding solution of approved quality and makeincluding clamps, connections, etc. complete as per specifications and as directed by engineer in charge. , same as sl. no: 610 above, but for 25mm nominal outer dia. pipes , same as sl. no: 610 above, but for 50mm nominal outer dia. pipes , providing and fixing 15 mm dia. nominal bore galvanized iron (gi) pipes complete with gi fittings including trenching and refilling etc. (external work) complete as per directions of engineer in charge. , same as sl. no. 640 above, but for 20mm dia. nominal bore pipes. , same as sl. no: 640 above, but for 50mm dia. nominal bore pipes. , same as sl. no. 640 above, but for 80mm dia. nominal bore pipes. , same as sl. no. 640 above, but for 100mm dia. nominal bore pipes. , same as sl. no. 640 above, but for 150mm dia. nominal bore pipes. , providing and fixing75 mm outer dia. of 6kg/sq.cm poly vinyl chloride(pvc) pipes (exposed on wall) ,including all pvc plain & brass threaded fittings & accessories including fixing the pipe with clamps at 1m spacing. this includes jointing of pipes & fittings with one step pvc solvent and testing of joints complete as per directions of engineer in charge. , same as item no:700 above, but for 110mmouter diameter. , providing and fixing 160 mm dia. rigid pvcpipesas rain water pipes,weep hole pipes etc. with ms holder clamps including fixing/embedding into masonry/concrete, providing connections like shoes, vents, specials, bends etc. fixing in perfect plumb etc. all complete including jointing with bonding solution of approved quality and make with pressure rating of 4 kg/ sq.cm including clamps, connections, etc. complete as per specifications and as directed by engineer in charge. , providing and fixing parryware or equivalent approved 15mm nominal borebrass angle valveincluding breaking walls and making good the same, inlet and outlet connections, etc. completeas directed by engineer in charge. , providing and fixingapproved cp brass urinal push angle valve of parryware or approved equivalent including breaking walls and making good the same, inlet and outlet connections, etc. completeas directed by engineer in charge. , providing and fixing metro or equivalent approved 15mm nominal bore brass bibcockincluding breaking walls and making good the same, inlet and outlet connections, etc. completeas directed by engineer in charge. , providing and fixing two way bibcock single lever range with flange of parryware crust or equivalent approved 15mm nominal bore cp including fixingand connections, etc. completeas directed by engineer in charge. , providing and fixing 25 mm nominal bore gun metal gate valve with cast iron (ci) wheel of approved quality (screwed end) including all fittings etc. complete as directed by engineer in charge. , same as sl. no. 770 above, but for 40mm nominal bore gate valve , same as sl. no. 770 above, but for 50mmnominal gate valve , providing and fixing 25mm nominal bore gi union in existing gi pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required as directed by engineer in charge. , same as sl. no.: 800 above, but for 40mm nominal bore gi union. , same as sl. no.: 800 above, but for 50mm nominal bore gi union. , providing and fixing 600 x 450mm mirror of superior glass of parryware or approved equivalent complete with cp brass screws, fastners and washers complete as directed by engineer in charge. , providing and fixing600 mm long cp rodtowel rail of parry ware make or approved equivalent complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour all complete as specified by engineer in charge. , providing and fixing in position approved quality liquid soap dispenser ofparrywareor approved equivalent make, of standard size with snap fittings, including drilling holes, fixing with cp screws all complete as directed by engineer in charge. , providing and fixing c.p. brass shower rose 100mm diameter with 15 to 20mm inlet of parryware or equivalent approved including 230mm shower arm, making inlet and outlet connections, etc. completeas directed by engineer in charge. , providing and fixing of cp brass twin robe hook of parryware/approved equivalent including fixing the coat hook including drilling holes on plastered/tiled wall and doors fixing the coat hook with cp screws including all fittings & fixtures, labour tools and tackles, making the good the same, all completeas directed by engineer in charge. , providing and fixing in positionstainless steel kitchen sink single bowl with drain board glossy finish folded edge of nirali elegance ultra or approved equivalent make of bowl size 510mmx 410mmx 200mm made of min stainless steel sheetsupported onm.s. brackets, supply, fixing ofm.s.brackets, fasteners, sinkcock (quarter turn range) of parryware agate or approved equivalent, c.p. angle valve of parry ware, c.p. brass waste, pvc drain pipewith heavy bottle trap of parry ware or approved equivalent make, inlet pipe, drain pipe , rubber plug, connections to floor trap with unions and all accessories as required to complete including cutting and making good the walls where ever required, painting all exposed metallic surfaces with two coats of approved shade and quality synthetic enamel paint over an approved quality priming of red oxide zinc chromate, making good of all damaged work, finishing etc., all complete as directed by engineer in charge. , providing and fixing coloured 10 litre p.v.c low level flushing cistern with manually controlled device(handle lever) deluxe dual flushofparryware or approved equivalent make with all fittings and fixtures complete as directed by engineer in charge. , supplying and laying in position square shaped 600mm x600 mm(grade md 10) medium dutyci manhole frame with lugs and coverincluding breaking of brick masonry or concrete surface to receive frame with lugs and making good the same with cement mortar 1:3 including applying two coats of anticorrosive paint inclusive of all labours and materials etc. complete as per specifications and as directed by the engineer in charge. , supplying and laying custom (prefabricated) pvc floor sumps/ floor traps fabricated out of 110mm dia. 6 kg/cm2 class pvc pipes with inlet and outlets from 40mm upto 75mm, including providing water seal, fixing to a perfect level, laying cement concrete in 1:3:6 mix cp/pvc colour grating with frame at 4mm below finished floor level making holes in masonry or concrete cutting surfaces conveying all dismantled portions and clearing the site,making leak proof joint and testing, etc. complete and as directed by engineer in charge. , making connection of drain or sewer line using pipes of upto 230mm diameter with existing manhole including breaking into and make good the walls, floors with cement concrete 1 : 2 : 4 mix (1 cement : 2 m sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1 : 4 ( 1 cement : 4 m sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. completeas directed by engineer in charge. , providing and fixing window/ventilator/ door glass panes with float glass panes with float glass of thickness 4mm, fixing with necessary pins and best quality putty or with wooden batten as necessary including removing old damaged glass, disposing of the same as directed all labour and materials etc. complete at all heights as directed by engineer in charge. , providing and fixingaluminium extruded section body tubular type universal hydraulic door closer of everest/ dyna/ universal or any other equivalent approved make with double speed adjustment with necessaryaccessories and screws with all labour charges,tools & tackles etc. all completeas directed by engineer in charge. , providing and fixing double action hydraulic floor spring with stainless steel cover plate of minimum 1.25mm thicknessof universal, everest or any other equivalent approved brand and manufacture is: 6315 marked, for doors for all heights includingall labours, tools and tackles ;cost of cutting floors as required, embedding in floors and cover plates with brass pivots and single piece m.s. sheet outer box with slide plateetc. complete as per the directions of engineer in charge. , providing and fixing bright finished brass 100mm mortice latch and lock isi marked with four leverswith necessary screws etc. complete (best make of approved quality) as specified by engineer in charge. , providing and fixing bright finished 125mm brass handles with necessary screws drilling holes in doors, cup boards including all fittings & fixtures, labour tools and tackles, making the good the same, all completeas directed by engineer in charge. , same as sl. no.: 970 above, but for 75mm brass handles. , providing and fixing in position first quality non reflective type polyester sun control film ofgarware or equivalent approved make of25 micron thickness including cleaning the door/ventilator panes,trimming the edges etc. complete as per the instructions of engineer in charge. , providing and fixing 12mm thick prelaminated particle board with decorative lamination on one side and balancing lamination on other side; flat pressed three layer or graded wood particle board, in panelling fixed in aluminium doors, windows ,shutters and partition frames with chromium platted(cp) brass / stainless steel screws etc. complete as perdirections of engineer in charge. , supplying and fixing24 mm thick pvc panelled door shutter with pvc frame including pvc towerbolts on either sides, pvc handlesincluding metal hinges and all other fittingsetc. complete as per directions of engineer in charge. , providing and fixing anodised aluminium work for fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/approximate z sections and other sections of approved make, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required pvc/neoprene felt etc. for fixed portion, minimum anodic coating of grade ac 15 shall be provided.aluminium sections shall be smooth, rust free, straight, mitred and jointed mechnically whereever required including cleat angle, aluminium snap beading for glazing/panelling, c.p. brass/stainless steel screws, all complete as per directions of engineer in charge. (glazings and panellings shall be paid separately) , same as sl.no: 1020 above, but for shutters of doors, windows, ventilators including fittings. , providing and fixing in positionupvc doors both single leaf/double leaf white in colour comprising of glass panel minimum 5mm thick and upvc panels of minimum 15mm thickness (doors may be either partly glazed partly paneled or fully panelled)with upvc stiles, rails,frame and accessories holdfasts, hinges, pull handles on both sides, locking arrangement as per requirementincluding labour charges, material cost, tools and tackles all complete as per specifications & as directed by engineer in charge. , providing and fixing in position sliding upvc windows/ventilators (with clear 5mm thick glass), white in colour including all fixtures, fastenings, sliding system, sliding handle with flush lock, epdm gaskets, wool pile etc., making recesses in brick/concrete surfaces and making good the same after fixing all complete as per directions of engineer in charge. , designing,supplying and fixing in position approved make chain/gear opearted steel rolling shutters conforming to is : 6248 using 18 gauge ms interlocking laths sections formed out of cold rolled steel strips 0.9mm thick,18mm wide and 1.25mm thick,80mm wide respectively for shutter width upto 3.5m and above 3.5m ; jointless ms channel section for guide ( minimum 3.15mm thick) ms girders,pressed bottom rails,shutter suspension stud shaft with pulley andcage,top rolling springs, locking arrangement including hood,gear operating mechanism and all accessories required and providing two coats of approved make and shade of rust proof synthetic enamel paint over a coat of red oxide or zinc chromate rich primer, etc. all complete as per directions of engineer in charge. , providing and fixing in position single/double leaf hinged type fire proof doorsof radiant or approved equivalent make conforming to is: 3614 with all necessary fittings and fixtures etc. fire proof doors shall have minimum fire rating of 2 hours including 1.20 mm thick stainless steel sheet cladded 46mm thick shutter with infill material honeycomb board complete with stainless steel frame (double rivet – 143 x 57mm) made from 1.60mm thick stainless steel sheet & fixing arrangementsetc. all complete as directed by engineer in charge. stainless steel shall be of grade 304. , providing and fixing isi marked, overall 30mm thickblock board flush door shutters of kutty or approved equivalent decorative type, consisting of solid core block board bonded with phenol formaldehyde synthetic resin and faced on one side with decorative1mm thick laminate and another side with water proof laminate of archidply or approved equivalentincluding providing and fixingt type second class teakwood perimeter beading fixed by means of approved quality neoprene based adhesive and nailing @ 300mm max., providing and fixing 125mm long stainless steel butt hinges [for each shutter (vertical spacing not exceeding 600mm) including providing wooden filler/sealer, stainless steel lock with status indicator, teak wood lipping, aluminium butt hinges, 3mm thick anodised(anodic coating not less than15 microns) aluminium kicking plate fixed with screws for entire door width on either side of door for a height of 600mm, fixing with door frame,door bush, finishing etc . all complete as directed by engineer in charge. , providing and fixingsecond class teak wooden framesfor doors, windows, ventilators for all heights including all labours, tools, tackles, cutting, shaping, jointing, applying a coat of bituminous paint on concealed surface, wood primer on exposed surface, fixing in masonry/rcc by means of 300mm x 25mm x 6mm thick m.s. hold fasts screwed to frame @ 600mm max vertically and grouted with 1:2:4concrete by volume in min. 350mm x 100mmx100mm sized hole made in masonry/96mm long, 12mm dia m.s. dash fastner, painting with two coats of approved shade and make(ici or equivalent) synthetic enamel paint over appoved quality primer coat, finishing etc. all complete as dirercted by engineer in charge. , false ceiling(a): providing and fixing in position 12 mm thick exterior grade boiling water proof(bwp) both sides prelaminated particle board (novapan or equivalent approved make) panels of approved colour and texture to form grids of 600x600 mm and suspension system consisting of aluminium framework with (a) main runners aluminium tee sections of 25mmx35mmsize,1.5mm thickness(b)cross runners aluminium tee sections of 25mmx25mm size,1.5mm thickness(c) perimeter section aluminium angle section 38mmx38mm,1mm thickness all round the perimeter of the ceiling.the grid system is to be suspended by interlocking the main and cross runners @ 600mm max.bothways by means of aluminium angle cleats.the main runners shall be suspended from the ceiling by means of 3mm thick ms flat clamp fixed to main runners @ 1200 max.and fixed to 6mm dia ms hook which again is fixed to ceiling.3mm thick ms flat clamp shall be connected to main runners with 25mm long ms clamp with levelling nut and @ 1200 mm max. the ms hooks shall be suspended from ceiling by means of slotting in 25mmx25mmx3mm thick ms angle,fixed to the slab by 12mm dia. dash fasteners@1200mm c/c.cross runners shall be fixed suitably @max.600mmc/c to form a grid 0f 600mmx600mm.necessary provisions for suspendinglight fixtures etc.,wherever necessary shall be provided .the framework may be suspended from the roof slab at desired height including finishing,making the framework perfectly levelled and aligned etc. all complete as per directions of engineer in charge.all the suspended members shall be anodized(min.15 microns) aluminium frames of standard extrusions .the rate quoted shall include the material costs,labour charges,tools and tackles etc. , false ceiling(b): providing and fixing false ceiling using aluminium composite panel acp 4mm thick (0.5mm thick aluminium sheet on top & bottom sandwiched with 3mm thick core material )confirming to bs 1467 in combination with approved solid and metallic colour panels laminated sandwiched composite panels to a grid made out of anodized aluminium (with 15 micron anodic coating) t sections 35x15x1.5mm size main runners and cross runners 23.5x19x1.5mm fixed to main runners placed 600mm centre to centre both ways so as to form a grid 600mm square.the frameowrk shall be suspended from the ceiling by level adjusting hangers of 6mm dia ms rodfixed to roof slab by means of ceiling cleats.the suspender shall be placed 600x1200 mm centre to centre including fixing to the frame with cp brass screws and applying priming coat of zinc chromate yellow primer.rates are inclusive of scaffolding,frame work ,labour charges,tools and tackles,all material costs etc. complete as directed by engineer in charge. , demolishing pcc work (taking all necessary safety precautions)manually / by mechanical means for all depths and heights belowand above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and disposal of unserviceable materialatdesignated place upto 7 km lead outside the refinery premises (vaikkadu village) as per specification and directions of engineer in charge. , demolishing rcc work (taking all necessary safety precautions)manually / by mechanical means for all depth and height belowand above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning anddisposal of unserviceable materialatdesignated place upto 7 km lead outside the refinery premises (vaikkadu village) as per specification and directions of engineer in charge. , demolishingbrick masonry incement mortar (taking all necessary safety precautions) for allheightsabove plinth level including supply of all labours,tools and tackles, necessary scaffolding, propping, underpinning, cleaning anddisposal of unserviceable material atdesignated place upto 7 km lead outside the refinery premises (vaikkadu village) as per specification and directions of engineer in charge. , demolishingstone/rubble masonry (taking all necessary safety precautions) for demolition of existing compound wall for the entire heightabove ground level including supply of all labours,tools and tackles, necessary scaffolding, propping, underpinning, cleaning anddisposal of unserviceable materialatdesignated place upto 7 km leadin vaikkadu area as per specification and directions of engineer in charge. , dismantling of structural steel works (bolted/riveted/welded)of all descriptions(taking all necessary safety precautions) for all heights & depths above & belowplinth level including supply ofall tools & tackles, consumables, necessary scaffolding etc. providing temporary bracings as required, cutting gussetplates, bolts, nuts, weldings etc, stacking of serviceable materials at designated location /cpcl storage yard/scrap yardwithin the refinery premises as per direction of engineer in charge. , dismantling and stacking fencing fabric of any material (taking all necessary safety precautions) , including supply of all tools & tackles, necessarypropping, underpinning, cutting, transporting , stackingand handing over the material to cpcl scrap yard inside refinery etc. all complete as specified and directed by engineer in charge. , dismantling bituminous road(taking all necessary safety precautions)manually / by mechanical means for all depths including cutting road taking out soling and metalling,sorting and screening,supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable materialto spoil heaps within 50mlead all complete as specified and as per directions of engineer in charge . , dismantling ci ,gi,pvc or asbestos drainage pipe with fitting and clamps including scaffolding, staging working platforms all complete including supply of all tools & tackles,stacking material, transporting, loading & unloading and handing overto scrap yard/stores within refinery premises and disposal of unserviceable materialatdesignated place upto7 km lead outside the refinery premises (vaikkadu area) as specified and directed by the engineer in charge. , dismantling of water closet, urinals, wash basins & flushing cistern of all types (ci, pvc, viterous china) with fitting and clamps including pipe lines all complete including supply of all tools & tackles,stacking material, transporting, loading & unloading and handing overto scrap yard/stores within refinery premisesand disposal of unserviceable materialatdesignated place upto7 km lead outside the refinery premises (vaikkadu area) as specified and directed by the engineer in charge. , demolishing of aluminium partitions/ gypsum/pop/tiled/thermocol false ceiling ,doors, windows, ventilators (steel/wood/aluminium/glass)shutters including, chowkhats, frames, architrave, holdfasts and all other retrieved materials(taking all necessary safety precautions) for all heights above floor level including supply of all labours,tools & tackles, providing necessary scaffolding, propping, underpinning, temporary supports etc.,as per the instruction of engineer in charge, cleaning and stacking of serviceable material like aluminium frames at destined location /cpcl storage yardwithin the refinery area and disposal of unserviceable material atdesignated place(vaikkadu area) upto 7 km lead outside the refinery premises as per specification and directions of engineer in charge. , demolishing of tile work in floors & walls laid in cement mortar for thickness upto 25mm (taking all necessary safety precautions)manually / by mechanical means including supply of all tools and tackles, propping, underpinning, cleaning the siteand disposal of unserviceable materialatdesignated place upto7 km lead outside the refinery premises (vaikkadu area)as per specification and directions of engineer in charge. , dismantling of tile work in roofing for thickness upto 25mm (taking all necessary safety precautions)manually / by mechanical means including supply of all tools and tackles, propping, underpinning, cleaning the siteand disposal of unserviceable materialatdesignated place upto7 km lead outside the refinery premises (vaikkadu area)as per specification and directions of engineer in charge. , dismantling ofgi/ac/aluminiumroofing sheets including ridges, hips, gutters, etc.in roofing, including suppy of all labours,tools & hooks, transportation and stacking of serviceable materials at destined location /cpcl storage yardwithin the refinery area and disposal of unserviceable material atdesignated place(vaikkadu area) upto 7 km lead outside the refinery premises as per specification and directions of engineer in charge. , chippingof rcc work by chisellingfor all depths below plinth level including supply of all tools and tackles,scaffolding,propping,underpinning etc. exposing, cutting,lapping/welding the reinforcement bars as per drawings and cleaning the same by wire brushing, washing the exposed surfaces,disposal of the unserviceable material to spil heaps anywhere within the plant boundary all complete as specified and directed.(excavation and backfilling if any shall be paid separately under relevant items.) , supplying,handling,transporting to site of work and fixing approved mechanical anchor fastenersms boltsof grade 5.8 or more,galvanisedwith minimum thickness of 5 microns(approved for use in cracked concrete),of 12mm dia at specified positions on concrete floors,roofs,beams( sides and bottom), walls,columns etc. according to manufacturers specifications including all accessories like nuts,washers etc. of required size,testing,necessary scaffolding,drilling of the holes in concrete surface with electric drill,cleaning of holes with air blowout & wire brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed by engineer in charge. , same as item 1260 above, but for 16mm dia. , same as item 1260 above, but for 20mm dia. , supplying,handling,transporting to site of work and fixing approved chemical anchor fasteners consisting of ms threaded rod of grade 5.8,galvanisedwith minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be used with the help of dispenser, of 12mm dia at specified positions on concrete floors,roofs,beams( sides and bottom), walls,columns etc. according to manufacturers specifications including all accessories like nuts,washers etc. of required size,testing,necessary scaffolding,drilling of the holes in concrete surface with electric drill,cleaning of holes with air blowout & wire brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed by engineer in charge. , same as item 1290 above, but for 16mm dia. , same as item 1290 above, but for 20mm dia. , making pockets/holes of sizes upto & inclusive 200x200x500mm in rcc/pcc works(taking all necessary safety precautions) by chiselling/drilling, including supply of all tools and tacklesetc. cutting of reinforcement bars,cleaning the pockets of all debris etc. all complete at all heights & depths as specified and directed by engineer in charge.scaffolding and disposal of debris shall be paid separately under relevant items. , repairs to existing rcc beams & columns, including chipping and dismantling & removing of loose particles applying cement paste, raking out joints, applying epoxy resin for bonding fresh cocrete to old concerete, filling void portionwith concrete 1:1:5:3 concrete (1cement:1.5 m sand :3 stone agrregates 12mm size) making good as same, including formwork, curing, staging, working platforms labours, tool and tackles all complete as per specifications and directions of engineer in charge. , supplying, transporting, storing, fabricating & erecting in position bolted and / or weldedstructural steel works like angles,channels, beams, plates, pipes, tubes etc.at all heights & levels and locations including all builtup sections/ compound sectionsmade out of rolled sections and / or plates / bent plates inexisting / new structural pipe supports, frames, etc., cutting to required size, straightening/bending if required, edge preparation,cleaning, scrapping & welding ofunsoundjoints in existing structural members, preheating, (including sealing of box section with continuous welding ) finishing edges by grinding , fixing in line and level with temporary bracings,including providing staging, scaffoldings, & working platforms at all heights, and removal of same after erection,including preparing the surface for painting ,surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease etc complete along with providing paint system as follows:(a) applying inorganic zinc silicate coat 50 micron dft(b) two coats of epoxy primer paint 50 micron dft each(c) two coats of anti rust epoxy top coat paint 75 micron dft each as per manufacturers specifications and as directed by engineer in charge. (d) note: one coat of zinc silicate and one coat of epoxy primer shall be applied on structural steel surfaces after manual cleaningprior to erection as per specifications & as directed by engineer in charge. supply of all materials in contractors scope. , same as sl. no. 1340 above, but for supplying, transporting, storing, fabricating & erecting in position structural steel works alone, excluding painting works but including pre erection painting works as per (d) in sl.no.1340 above. , same as sl. no. 1340 above, but for structural steel painting worksalone excludingsupplying, transporting, storing, fabricating & erecting in position structural steel works and excluding pre erection painting works as per (d) in sl.no.1340. , supplying, transporting, storing, fabricating and fixing in position ms steel inserts (withlugs)asshownin drawing including fabrication to any shape made out of flats, plates, rolled sections, sleeves, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both plain,reinforced cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where ever necessary, tying and holding to correct level, line and position, any auxilliary dummy structures to support the heavy inserts,& painting with one shop coat of inorganic zinc silicate primer and finsihing with two coats of anti rust epoxy paint of approved brand and colour ,etc complete as perdrawing,specification and direction of engineer in charge. , supplying, fabricating, fixing and keeping in position at all levels and locations threadedm.s. anchor bolts of all diameters andnomenclature including nuts, washers, anchor plates, washer plates, closure plates, pipe sleeves etc. in foundations, pedestals, etc. as directed including handling & transporting, straightening if required, turning from relevant size. m.s. rounds to required diameter, threading, welding, providing necessary templates and auxillary dummy structure, if any, necessary tying and welding, providing necessary templates and auxillary dummy strucutres, if any, necessary tying and welding with reinforcement bars, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as perdrawing and specification and direction of engineer in charge. , supply, fabricating, transporting to site and erecting in position ms gates/grills as per drawings using steel confirming to is:2062 / is:1161 including supply and fixing of all materials such as hinges, locking arrangement, pluger bolts, ci wheels and fixtures, ms rail for wheel with anchor etc, all complete as directed by engineer in charge. rate shall include material costs,labour charges,all inserts and embedments essential for smooth operation of the gate. the rate shall also include two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer. , supplying, transporting, fabricating, erecting and fixing in position as per the specifications, electroforged hot dip galvanised gratings (gi coating weight shall be 305gm/sqm as per is 4759) of the approved design and pattern and erecting & fixing of fabricated steel work on operating floors, platforms, stair landings & treads,drain cover etc., at various levels including supply of all gi fixtures like edge plates for treads,clips, studs, bolts, welding if required and nosing for the treads and etc., complete, as per drawings, specifications & as directed by engineer in charge. , supplying galvanised ms chequered plate,transporting ,cleaning & fabricating & fixing on floors as cable trench covers including grinding edges & supplying all bolts,nuts ,washers etc. complete .the galvanised ms chequered plate(6mm to 10mm thick) to be fixed to the supporting beam with help of 12mm dia. counter sunk bolts at 400mmc/c including necessary modifications for supporting structure,drilling holes in plates and supporting structures etc. all complete as per drawings,specifications and directions of engineer in charge. , providing and fixing double scaffolding(cup lock type) on the exterior side, up to three story height made with 40mm dia m.s. tube 1.5m centre horizontal and vertcical tubes joining with cup and lock system with m.s. tubes challies, m.s. clamps and m.s. staircas systems in the scaffolding for woking platform etc. and maintainingit in a serviceable condition for the required durationas approved and removing it there after. the scaffolding system shall be stiffened with bracing and runners, connection with the building etc., whereever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer in charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrescpective of duration of scaffolding. , supplying, fabricating, erecting stainless steel works including gratings (ss grade 304 )to required profile and size as filter in drain with necessary fittings including straightening if required, cutting, bending, welding,grouting , cleaning, surface preparation as per specifications etc. all completed as specified and directed by engineer in charge. , providing necessary barricading workswith 1mm thick corrugated gi sheets and supporting with necessary structural steel arrangements including scafffolding pipes and tubes for a maximum height of 3 m , embedding the same in firm ground etc. rate quoted should include mobilisation and erection of the above items including demobilisation after completion of works.the same will be the property of contractor. , providing and laying to required camber granular base wet mix macadam , comprising of coarse aggregate 53 mm & down size as per specification including preparation of mix in approved mixing plant with controlled addition of water ,spreading with paver finisher or motor grader & rolling with 10 mt roller(vibro roller) in layer of compacted thickness 150mm as directed by engineer in charge. , providing and laying reinforced np3 class (medium duty) rcc hume pipe of 300mm dia. with collars jointed with stiff mixture of cement mortar in the proportion of 1:2(1cement:2m sand)for road crossing etc.including cutting, lowering, laying in position , with proper level, slope , testing of joints etc. as per specifications and directed by engineer in charge. , same as sl. no. 1460 above,but for 450mm diameter. , supplying and fixing at site chain link wire net fencing with chain link fence fabric of 50x50 mm diamond mesh of 2.5mm dia gi innerwire insulated with minimum 1.5mm pvc to achieve outer dia not less than 4mm to intermediate, corner, straining, starting or end post of ms angles/post/strut and one horizontal strand of 8 swg (4mm) dia gi inner wire insulated with pvc for tension in chain link (at middle) , gi staples for fixing chainlink in the intermediate posts and 10mm dia 175mm long hook bolts (threaded portion being 75mm long minimum) for fixing each link of the chain link; with all labour and materials but excluding cost of all ms angle postetc. complete as per drawings and directions of engineer in charge. , supplying, fixing and tensioning in position on rcc posts, 12 gauge, 2 ply, 4points, gi barbed wire designation a 1 confirming to is:278 in horizontal rows for barbed wire fencing etc with necessary gi staples, clips and pins, gi straining bolts and binding wire, etc. complete as per specifications and directions of engineer in charge. , supplying and fixing at site welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint over a coat of primer including cost of materials,labour, tools,tackles all complete as directed by engineer in charge. , concertinacoilfencing: providing and fixing 750mm dia green colour painted razor type concertina fencing with all required clips, pins, etc as per the specifications(each concertina coil piece stretch to 9m length) concertina coil shall be fixed to the m.s. angle with 4 rows of same concertina runner wires over exisiting x type angle supports as per drawings. rate shall be quoted on running metre of compound wall basis. a.diameter of coil: 750mm, number of circles and number of clips are 72 and 180 in each 9m of length. b.central core wire: core wire shall be of 2.6mm diameter made of high carbon spring steel of high tensile strength having minimum galvanizedcoating thickness equivalent to 230 grams per sq.m. c. razor strip: 0.5mm thick hot dip galvanized and of width 19mm having series of barbed punched all along the length at regular intervalshaving minimum galvanized thickness of 12 microns. hardness of tape should be between 137 180 vpn (victor penetration number) d. clips: 1.5mm thick made out of stainless steel. e. runner wire: shall be of same specifications as of central core wire. , supply of unskilled class i labourto carry out petty works not assessable for measurements/minor repair works, on day to day basis. the rates shall include esi, pf, payroll cost and allowances, fringe benefits, overhead supervision, profits andhand tools. , same as sl. no. 1520 above,but for supply of unskilled class ii labour , same as sl. no. 1520 above,but for supply of mason. , same as sl. no. 1520 above,but for supply of plumber. , same as sl. no. 1520 above,but for supply of carpenter. , same as sl. no. 1520 above, but for supply of stone cutter. , same as sl. no. 1520 above, but for supply ofwelder/cutter/grinder including all consumables, necessary machineries, tools and tackles , ppeand with valid cpcl welders certificate. , same as sl. no. 1520 above, but for supply offitter including all consumables, necessary machineries, tools and tackles and ppe. , same as sl. no. 1520 above, but for supply ofrigger. , supply of jcb on hire basis on all days including sundays on 8 hrs.shift including driver,assistant /fuel/oil/lubricants /all consumables etc. complete. the quoted rate should include mobilization, operator crews/driver /assistant cost,tools, tackles etc., as directed by the engineer in charge. , supply ofpoclain pc 200on hire basis including fuel/oil/lubricantsfor excavating , levelling to required slopes and dumping at designated places within thesite premises. the quoted rate should include mobilization,operator crews/driver cost, loading, transporting, unloading, tools, tackles etc. complete as directed by engineer in charge. , same as sl. no: 1620 above, but for supply of crawler mounted dozzer. , same as sl. no: 1620 above, but for supply of tippers of capacity not less than 10 cu.m , same as sl. no: 1620 above, but for supply of taurus/approved equivalent tippers of capacity minimum 15 cu.m , same as sl. no: 1620 above, but for supply of mini poclain 30. , same as sl. no: 1620 above, but for supply of tractor mounted dozzer . , supply of 20 feet trailer with tractor on hire basis on all working days from monday to saturday on 8 hrs.shift ,inclusive ofdriver,one assistant,all consumables like diesel etc.,with all safety precautions within cpcl refinery premises.the quoted rate should include mobilization,operator crews/driver /assistant cost, loading, transporting from site to scrap yard within refinery premises, unloading,tools, tackles,wire ropes,pulley blocks,belts,chains etc. for lifting,aligning,tying,stacking etc. all complete as directed by engineer in charge. , same as sl.nono. 1680 above but for tractor with trailer of minimumcapacity 2.5 cu.m. , same as sl.nono. 1680 above but for 40 feet trailer with tractor . , supply of front cabin hydraof minimum capacity12 t on hire basis on alldays including sundays on 8 hrs.shift ,inclusive of driver,one assistant,all consumables like diesel etc.,with all safety precautions within cpcl refinery premises.the quoted rate should include mobilization,operator crews/driver /assistant cost, loading, transporting, unloading, labour, tools, tackles etc. complete as directed by engineer in charge. , supply ofskylift of minimum capacity 300kg for maximum working height upto 20m with high manoeuvrability and hydraulically operated on hire basis on alldays including sundays on 8 hrs.shift with all safety precautions within cpcl refinery premises. the quoted rate should include mobilization,operator cost, diesel charges,transporting, demobilisation etc. complete as directed by engineer in charge. , supply of 400amps welding rectifieron hire basis on alldays including sundays on 8 hrs.shift with all safety precautions within cpcl refinery premises.the quoted rate should include mobilization, transporting, demobilisation costs etc. complete as directed by engineer in charge. , same as sl.no1730 above but for supply of dg set of minimum capacity 63kva including diesel charges . , supply of gully sucker truckon hire basis for removal of oil sludge with inbuiltvacuum suction using super suction machine and tanker of minimum 6 kl capacity with necessary suction/ delivery hoses of sufficient lengths and personnels of 2(two) nos. in addition to a driver and cleaner to handle the floating oils on storm water pond/drains on regular basis on all working days from monday to saturday (8 hours/day starting from the reporting time at site). the quoted rate should be for supply of one gully sucker truck as specified above on hire basis, inclusive of charges towards fuel/oils/lubricants, operator crews /driver costs, all labour, tools, tackles, mobilization, loading, transporting, unloading in the refinery premisesas directed by the engineer in charge. , pumping out watercaused by natural ground water sources, broken water mains of drains adn the like using diesel/ electric power driven self priming pumps of adequate capacity with necessary discharge and suction hoses to required length including hire, fuel/oil and operator cost etc. complete as directed by engineer in charge. , providing and bunding with sand filled bags of min 0.5 cu.ft. in capacity for maintaining and diverting the flow of water etc. including supply and filling of sand, stitching of the bags, carting to site of work to any distance, keeping position as directed, plugging holes and paddling etc., with all labour, materials, tools plants including the cost of sand and empty gunny /polythene bags etc. complete as directed by engineer in charge. , cleaning of man holes dechocking and flushing of industrial ows/fecal sewage lines of different diameters between two manholes with drain cleaning rods, bamboos strips flushing with water and compressed air, removal of sludge and disposal ofthe same at identified areas within the refinery premises upto a lead of 2km radius, as directed by the engineer in charge all labour including removing and refixing the cover slabs in position, transportation of required machinery tools, plants etc., complete taking all safety precautions as specified. thecompressed air and water at one point shall be supplied free of cost, if required.for catch basins/pits/inspection/gully trap chambers etc. , providing and laying 60mm thick factory made cement concrete interlocking rubber mould paver block of m30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in two or more colour and pattern over and including 50mm thick compacted bed of coarse sand filling the joints withsand etc. all complete as per the direction of engineer in charge. , supplying, transportation, installing, dismantling and removing of interlocking type temporary steel sheet piles with crane, vibro hammer/pile driving machinery of adequate capacity and other ancillary equipment, including driving and joining the sheet piles as per specification up to levels as per specifications & directed by eic. installed sheet piles are temporary and shall retain the earth, provide excavation support for a depth of 6m from ground level and protection against water seepage & sliding of earth during construction activities.including supply of all materials, steel members, welding, strutting, tie members supporting, labour, plant & machineries, etc. all complete as directed by engineer in charge. (note: 1. method of measurement for payment will be the actual horizontal limit of temporary sheet piling installed and accepted, and the vertical limit as measured from the bottom of the exposed face of the sheeting to the top of the retained earth behind the sheeting. 2. the steel sheet piles shall be supplied by the contractor and shall remain the property of the contractor). , providing and fixing20 mm nominal outer dia chlorinated poly vinyl chloride(cpvc) pipes, of approved equivalent make withholder clamps including fixing/embedding into masonry/concrete, providing connections like shoes, vents, specials, bends etc. fixing in perfect plumb,spacing of jumpers shall be minimum 1mc/c etc. all complete including jointing with bonding solution of approved quality and makeincluding clamps, connections, etc. complete as per specifications and as directed by engineer in charge. , same as sl. no: 1810 above, but for 25mm nominal outer dia. pipes , providing and laying of hot applied thermoplastic compound 2.5mm thick asroad marking strips including reflectorising glassbeads @ 250 gms per sq.m area,thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35. the finished surface to be level uniform and free from streaks and holes etc. complete as per morth specificationand as directed by engineer in charge. , providing and fixing glow studs of size 100x20 mm made of heavy dutybody shall be moulded asa (acrylic styrene acryloretrite ) or hip (highimpact polystyrene)having electronically welded microprismaticlens with abrasion resistant coating as approved by engineer in charge.the glow stud shall support a load of 13635 kg tested in accordance with astm d4280. the slope of retroreflective surface shall be 35(+/ 5)degress to base .the reflective panels on both sides with at least 12 cm of reflective area up each side. the luminance intensity should be asper thespecification and shall be tested as described in astm i: 809 as recommended in bs: 873 part 4 : 1973. the studs shall be fixed to the road surface using the adhesive conforming to is, as per procedure recommended by the manufacturer complete and as per direction of engineer in charge. , supply of diesel run vehicle mounted hydraulic operated high pressure suction cum jetting sewer cleaning machineon hire basis on alldays including sundays on 8 hrs.shift fitted with pumps having suction tank mounted including water jetting pipes & accessories, suction hose pipe, discharge pipes, all materials, consumables, tools & tackles, etc.,skilled driver cum operator, required helpers for carrying out the jetting / suction operations, cleaning of ows pits, pipelines and manholes etc. as per the directions of engineer in charge. rate includes mobilization, demobilization, charges for hoses of minimum length of 100m. => limited...

Indian Rare Earths Limited - Tamil Nadu

32770072 dismantling and removal of r.r. masonry sl.no.1 of scope of work dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of engineer in charge. 2 2 dismantling and removal of rcc foundation sl.no. 2 of scope of work dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m etc., complete as per the direction of engineer in charge. 3 3 earthwork excavation for foundation sl.no. 3 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineer in charge. 4 4 supplying, providing and laying pcc 1:4:8 mix for foundation sl.no. 4 of scope of work supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 5 5 supplying, providing & laying rr masonry foundation sl.no. 5 of scope of work supplying, providing & laying rr masonry foundation / wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the engineer in charge. 6 6 supplying, providing and laying dry rubble masonry for soak pit sl.no. 6 of scope of work supplying, providing and laying dry rubble masonry for soak pit for construction of wall using hard blue granite stone, etc. complete as per standard specifications and as directed by the engineer in charge. 7 7 supplying, providing and laying brick masonry sl.no. 7 of scope of work supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 8 8 supplying, providing and laying pcc 1:2:4 mix for foundation sl.no. 8 of scope of work supplying, providing and laying pcc 1:2:4 mix for foundation / flooring work / kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 9 9 supplying, providing and fixing twisted reinforcement sl.no. 9 of scope of work supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d / fe550d ( tmt bars tata / agni / jsw ) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction engineer in charge including binding, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specification and as per the direction of engineer in charge. 10 10 supplying, providing and laying cement concret 1:1.5:3 sl.no. 10 of scope of work supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, complete as per specification and as directed by engineer in charge. 11 11 supplying, plastering with cm 1:4 mix 15mm thick sl.no. 11 of scope of work supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 8m height with neat finishing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineer in charge. 12 12 supplying, plastering with cm 1:3 mix 12mm thick sl.no. 12 of scope of work supplying, plastering with cm 1:3 mix 12mm thick one coat floated hard & trowelled smooth for rcc beam, column, ceiling upto 8m height with neat finishing and necessary grouting, etc. including all scaffolding, etc. complete complying with standard specifications and as directed by the engineer in charge. 13 13 supply of paints and painting two coat sl.no. 13 of scope of work supply of paints and painting two coat with emulsion paint ( asian / berger / nippon ) 1st quality of approved shade for the external / internal masonry surface upto 10m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying wall primer & putty touch up works wherever required etc complete as directed by the engineer in charge. 14 14 supplying, providing and fixing sintex pvc door sl.no. 14 of scope of work supplying, providing and fixing sintex make pvc door of size 750x2100mm including hinges, handle and locking arrangements, etc. complete as directed by engineer in charge. 15 15 supplying, providing and fixing steel door sl.no. 15 of scope of work supplying, providing and fixing steel door of size 1.20x2.10m consisting of heavy type 40mm g.i. square pipe ( is:4923 ) all round and middle two horizontal 25mm g.i. square pipe at 100mm centre to centre vertical on the top half portion and bottom portion covered with 2mm thick aluminium chequered sheet fixed with 25x5mm ms flat welded with outer frame on both sides of aluminium sheet including all supply and fixing ms kondy, locking arrangements and painting the gate with two coats of enamel paint over a coat of zinc chromate enamel yellow base primer, etc. complete as directed by engineer in charge. 16 16 supplying, providing and finishing the floor with anti skid ceramic tiles sl.no. 16 of scope of work supplying, providing and finishing the floor with johnson / somany / kajaria make anti skid ceramic tiles of size 300x300mm of approved quality and shade in cm 1:3 ? 15mm thick and pointing the tiles with matching colour cement, etc. complete as per the direction of the engineer in charge. 17 17 supplying, providing, laying, dadoing the walls tiles sl.no. 17 of scope of work supplying, providing, laying, dadoing the walls with johnson / somany / kajaria make ceramic wall tiles of size 450mmx300mm of approved quality and shade fixing with cm 1:2 ? 10mm thick, etc. including neat cleaning, grouting and finishing with shaded colour joint filler etc. complete as per the direction of the engineer in charge. 18 18 supplying, providing and fixing rcc jally sl.no. 18 of scope of work supplying, providing and fixing rcc jally of size 0.60x0.45m.as per the direction of the engineer in charge 19 19 supplying, providing and and laying 20 / 25mm cpvc pipe sl.no. 19 of scope of work supplying, providing and laying 20 / 25mm cpvc astrol / ashirvad pipes including all specials cpvc / brass such as bend, elbow, reducer, tee, solvent cement, mta & fta etc. complete as per the direction of engineer in charge. 20 20 supplying, providing and laying 20 / 25 / 32mm id pvc pipes sl.no. 20 of scope of work supplying, providing and laying 20 / 25 / 32mm id pvc finolex / ashirvad / astral superthick pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction of engineer in charge. 21 21 supplying, providing and laying 40 / 50 / 63mm dia idpvc pipes sl.no. 21 of scope of work supplying, providing and laying 40 / 50 / 63mm dia id pvc finolex / ashirwad / astral superthick pipes including all specials such as bend, elbow, reducer, tee, solvent cement etc. complete as per the direction of engineer in charge. 22 22 supplying, providing and laying 110mm idpvc pipes sl.no. 22 of scope of work supplying, providing and laying 110mm dia id pvc finolex / ashirwad / astral ( 6kg ) pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction of engineer in charge. 23 23 supplying, providing and fixing bib tap sl.no. 23 of scope of work supplying, providing and fixing the cp sanitary fittings: bib tap / pillar tap as per the direction of engineer in charge. 24 24 supplying, providing and fixing urinal sl.no. 24 of scope of work supplying, providing and fixing the cp & sanitary fittings: white parryware urinal niagara with spreader and waste pipe including suitable azhirwad / supreme / high count make pvc gully trap, urinal bracket, urinal cock, etc. as per the direction of engineer in charge. 25 25 supplying, providing and fixing urinal partition slab sl.no. 25 of scope of work supplying, providing and fixing the cp & sanitary fittings: urinal partition slab i.e. both side polished and corner grinded ( for smooth finish ) marble slab of size 600x1200mm ? 20mm thick, with neat finishing etc. complete as per the direction of the engineer in charge. 26 26 supplying, providing and fixing wall hung basin sl.no. 26 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware duke wall hung basin, colour: white wash basins with necessary accessories ( waste coupling, waste hose, etc. ) as per the direction of engineer in charge. 27 27 supplying, providing and fixing indian toilet sl.no. 27 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware ceramic sanitary ware indian toilet / orissa pan with required trap and slim flush tank combo pack ( standard, white ) ( 23 inch indian toilet ) etc.as per the direction of engineer in charge. 28 28 supplying, providing and fixing europeon closet sl.no. 28 of scope of work supplying, providing and fixing the cp & sanitary fittings: elite [ europeon closet ] white parryware single piece suite 525x380x400mm including seat cover, with required trap and slim flush tank ( standard, white ) and fittings as per the direction of engineer in charge. 29 29 supplying, providing and fixing 20 / 25mm brass ball valve sl.no. 29 of scope of work supplying, providing and fixing the cp & sanitary fittings: 20 / 25mm brass ball valve of heavy type including fixing, etc. as per the direction of engineer in charge. 30 30 supplying, providing and fixing 500 ltrs water tank sl.no. 30 of scope of work supplying, providing and fixing 500 ltrs. capacity sintex water tank with all inlet and outlet pipe fitting arrangements and 20mm brass float valves, etc., complete as per the direction of the engineer in charge. 31 31 supplying, providing and fixing health faucet sl.no. 31 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware health faucet with hose & hook as per the direction of engineer in charge. 32 32 supplying, providing and fixing towel rail sl.no. 32 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware towel rail 600mm as per the direction of engineer in charge. 33 33 supplying, providing and fixing angle cock sl.no. 33 of scope of work supplying, providing and fixing the cp & sanitary fittings: parryware angle cock as per the direction of engineer in charge. 34 34 engagement of labour ( mazdoor ) for miscellaneous work sl.no. 34 of scope of work engagement of labour ( mazdoor ) for miscellaneous work as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

Indian Rare Earths Limited - Tamil Nadu

32671774 earthwork excavation sl.no.1 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 200m and lift upto 2m including refilling etc., complete as per the direction of the engineer in charge. 2 2 supplying, providing & laying rr masonry sl.no 2 of scope of work supplying, providing & laying rr masonry foundation / wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the engineer in charge 3 3 supplying, providing and laying solid block brick sl.no 3 of scope of work supplying, providing and laying solid block brick masonry in cm 1:6 using cement concrete solid blocks of minimum size 400*200*150mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 4 4 supplying, providing and laying solid block brick sl.no 4 of scope of work supplying, providing and laying solid block brick masonry in cm 1:6 using cement concrete solid blocks of minimum size 400*200*100mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 5 5 supplying, providing and laying brick masonry sl.no 5 supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 6 6 supplying, providing and laying brick masonry sl.no 6 of scope of work supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls from 4.5m to 9.0m height including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineer in charge. 7 7 supplying, providing and laying pcc sl..no 7 of scope of work supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 8 8 supplying, providing and laying pcc sl.no 8 of scope of work supplying, providing and laying pcc 1:2:4 mix for foundation / flooring work / kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineer in charge. 9 9 supplying, plastering sl.no 9 of scope of work supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 8m height with neat finishing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineer in charge. 10 10 supplying, plastering sl.no 10 of scope of work supplying, plastering with cm 1:3 mix 12mm thick one coat floated hard & trowelled smooth for rcc beam, column, ceiling upto 8m height with neat finishing and necessary grouting, etc. including all scaffolding, etc. complete complying with standard specifications and as directed by the engineer in charge. 11 11 supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d supplying, providing and fixing twisted reinforcement is 1786 hysd bars fe500d / fe550d ( tmt bars tata / agni / jsw ) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction engineer in charge including binding, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specification and as per the direction of engineer in charge. 12 12 supplying, providing and laying cement concrete sl.no 12 as per the scope of work supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, complete as directed by engineer in charge. 13 13 supplying, providing and finishing the floor sl.no 13 as per the scope of work supplying, providing and finishing the floor with johnson / somany / kajaria make anti skid ceramic tiles of size 300x300mm of approved quality and shade in cm 1:3 ? 15mm thick and pointing the tiles with matching colour cement, etc. complete as per the direction of the engineer in charge. 14 14 supplying, providing, laying, dadoing the walls sl.no 14 as per the scope of work supplying, providing, laying, dadoing the walls with johnson / somany / kajaria make ceramic wall tiles of size 450mmx300mm of approved quality and shade fixing with cm 1:2 ? 10mm thick, etc. including neat cleaning, grouting and finishing with shaded colour joint filler complete etc. complete as per the direction of the engineer in charge. 15 15 supplying, providing and laying with 10mm thick sl.no 15 as per the scope of work supplying, providing and laying with 10mm thick vitrified / marbonite double charge tiles of size 600mmx600mm johnson / kajaria / somania brand with cement mortar 1:2 and pointing including finishing the joint and pointing flush with the surface, etc. complete as directed by engineer in charge. 16 16 dismantling and removal of r.r. sl.no 16 as per the scope of work dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of engineer in charge. 17 17 supplying and fixing 14 swg, 2 strands gi barbed wire sl.no 17 of scope of work supplying and fixing 14 swg, 2 strands gi barbed wire horizontally 5 rows and vertically @ 1.0m centre to centre, each on the erected casuarina tree poles / rcc post and tying with gi wire with the poles for each horizontal rows and vertical row tying with each horizontal rows, etc. complete as per the direction of the engineer in charge ( rate including the cost of all materials, labour, etc. but excluding the cost of casuarina pole ) . 18 18 dismantling and removal of rcc foundation sl.no 18 of scope of work dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m, and returning the ms rod to store, etc., complete as per the direction of engineer in charge. 19 19 supply of paints and painting sl.no 19 of scope of worke. supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade ( berger / asian / nippon ) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer / primer and putty where ver required including necessary scaffolding arrangements, etc. complete as directed by the engineer in charge. 20 20 supply of paints and painting sl.no 20 of scope of work supply of paints and painting two coat with emulsion paint ( asian / berger / nippon ) 1st quality of approved shade for the external / internal masonry surface upto 10m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying wall primer & putty touch up works wherever required etc complete as directed by the engineer in charge. 21 21 engagement of mason for miscellaneous work sl.no 21 of scope of work engagement of mason for miscellaneous work such as repairing the existing damaged sunshade, beams, columns, masonry works including providing scaffolding works, roof leak arresting works, etc. complete as directed by the engineer in charge ( required materials will be issued by company on free of cost ) . 22 22 engagement of carpenter for miscellaneous work sl.no 22 of scope of work engagement of carpenter for miscellaneous work such as repairing furniture, door and windows, etc. complete as directed by the engineer in charge ( required materials will be issued by company on free of cost ) . 23 23 engagement of painter sl.no 23 of scope of work engagement of painter for miscellaneous work such as painting work in the existing furniture / kerb walls / walls / gates including scrapping & cleaning the surface, etc. complete as directed by the engineer in charge ( required painting materials will be issued by company on free of cost ) . 24 24 engagement of artist for artistic work sl.no 24 of scope of work engagement of artist for artistic work in the furniture / gates / name board / building wall, etc. including scrapping & cleaning the surface and marking, etc. complete as directed by the engineer in charge ( required painting materials will be issued by company on free of cost ) . 25 25 engagement of plumber for miscellaneous work sl.no 25 of scope of work engagement of plumber for miscellaneous work such as repairing the pipe line, plumbing work, etc. complete as directed by the engineer in charge ( required plumbing materials will be issued by company on free of cost ) 26 26 engagement of labour ( mazdoor ) sl.no 26 of scope of work engagement of labour ( mazdoor ) for miscellaneous work such as assisting the mason for repairing the existing damaged sunshade, beams, columns, masonry works including providing scaffolding work, roof leak arresting works, etc. and removal of branches of trees and providing temporary fencing, etc. complete as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

Airports Authority Of India - Tamil Nadu

32337263 maintenance repair to runways at chennai airport chennai during the year 2022 23 sh supply of runway marking retro reflective paints emulsion paints and reflective glass beads etc supply of runway marking retro reflective paints emulsion paints and reflective glass beads etc...

Airports Authority Of India - Tamil Nadu

32309463 maintenance repair to runways at chennai airport, chennai during the year 2022 23 sh: supply of runway marking retro reflective paints, emulsion paints and reflective glass beads etc...

Hindu Religious And Charitable Endowments Department - Tamil Nadu

31815111 supplying of survey stones of triangular shape of size 20x20x20cm and height 120cm made up of precast rcc of m20 grade with1:1.5:3 mix including earthwork excavation for 0.45x0.45x0.75m size and survey stone fixed in pcc 1:3:6 mix using 40mm hbg metal of size 0.45x0.45x0.75m of the survey stone curing , painting with emulsion paint and conveyance of transport charge for survey stone to the survey land etc., complete the location identified by the temple authorities.etc., complete.required 2500 nossupply and fabrication of steel including bending cutting cost and conveyance of all etc complete=> 1...

Tamil Nadu Civil Supplies Corporation Limited - Tamil Nadu

31451274 ee/db/d8/99512/2022 renovating and improvements to the existing crs building 13 at kumarapalayam in namakkal district , civil work , dismantling,clearing away from the site for one course pressed tiles roof finish in cm etc., complete complying with standard specification as directed bycorporation officers. , dismantling the chipping of concrete & roughening the surface, etc., complete as per standard specification and as directed by the deparmental officers. , cement concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all rcc items of works excluding costetc. complete complying with standard specification and as directed by the departmental officers. , plastering in cement mortor 1:3 mix (one cement,five sand) 12mm thick including cost of scoffolding ,finishing ,curing etc., complete complying with standard specification and as directed by the departmental officers. , finishing the top of roof with one course of machine pressed tiles of size (23x23x2 cm)approved quality in c.m 1:3 12mm thick mixed with water proofing compound etc complete. , thorough scrapping of old plastered/old paintedsurface as directed by departmental officers , painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colouras directed by departmental officers. , paving the floor with best quality vertified tiles of size 600 x 600 x 8mmof approved colour, shade and quality laid in cement mortar 1:3 etc complete. , painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification etc. complete complying with standard specification and as directed by the departmental officers. , supplying pin headed / fluted / figured glass 3mm thick as directed by departmental officers.,complete complying with standard specification etc., complete. , providing two legged scaffolding using 15cm dia casuarinas post of 4m over all length (3m length + 0.5m projection + 0.5m into the ground) the distance between two rows being 1.5m etc complete....

Central Public Works Department - Tamil Nadu

30802211 annual repair and maintenance of to gpoa rajaji bhavan at besant nagar chennai sh finishing kerb stones with emulsion paint and making arrangements for republic day celebration on 26th jan 2022...

Municipal Adminitration And Water Supply Department - Tamil Nadu

30448286 construction of compound wall all round at mcc centre in ward no22 peariyur road burial ground , earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders ss.20b and sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete 10 cum for column , earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders ss.20b and sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete 10 cum for kerbwall , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using 40mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification , centering for soffits of rcc slabs of plane surface like lintels, beams , etc., including strutting 3m high using mild steel sheets of size 90cm x60cm x and b.g 10 stiffened with m.s angles of size 25mm x 25mm x 3mm laid over silver oak ( c.w ) joists of size 10cm x 6.5cm ( spaced at about 90cm c / c ) and supported dy casurina props of 10cm to 13cm dia ( spaced of 75cm c / c ) complying with standard specification and directed 10 m 2 ( p & d ) data 38 for column , centering for soffits of rcc slabs of plane surface like lintels, beams , etc., including strutting 3m high using mild steel sheets of size 90cm x60cm x and b.g 10 stiffened with m.s angles of size 25mm x 25mm x 3mm laid over silver oak ( c.w ) joists of size 10cm x 6.5cm ( spaced at about 90cm c / c ) and supported dy casurina props of 10cm to 13cm dia ( spaced of 75cm c / c ) complying with standard specification and directed 10 m 2 ( p & d ) data 38 for grade beam , centering for soffits of rcc slabs of plane surface like lintels, beams , etc., including strutting 3m high using mild steel sheets of size 90cm x60cm x and b.g 10 stiffened with m.s angles of size 25mm x 25mm x 3mm laid over silver oak ( c.w ) joists of size 10cm x 6.5cm ( spaced at about 90cm c / c ) and supported dy casurina props of 10cm to 13cm dia ( spaced of 75cm c / c ) complying with standard specification and directed 10 m 2 ( p & d ) data 38 for kerbwall , supplying and fabricating and placing in position ms ( or ) r.t.s. bar for reinforcement to all rcc works as per the design given including cost ofsteel and binding wire also in all floors. , reinforced cement concrete 1:1.5 :3 ( one cement, one and half sand & three course aggregate ) using 20mm gauge hand broken / and broken granite stone for all rccitemsof works excluding centering shuttering and cost of reinforcement but including curing etc., complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete. , plain cement concrete 1:2:4 ( one cement, two fine aggregates and four coarse aggregates ) using 20mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification , brick work in cm 1:5 ( one cement & five sand ) using ii class ground moulded bricks of size 9x43 / 8x 2 3 / 4 including finishing, curing, etc., complete complying with standard specification 100cft , plastering with cement mortar ( 1:5 ) 12mm , thick in all floors including cost and conveyance of all materilas to site and labour charges etc, complete as per standard specifications ( s.i.306 ) , painting two coats with ready mixed plastic emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 10 sq.m , providing and laying, spreading and compacting graded stone aggregate to wet mix macadam ( wmm ) specification including premixing the material with water at omc in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of morth specifications. , supplying and laying rubberised interlocking paver blockm40 grade providing and laying of83mmthick high strength type conforming is 15658 2006 of rubberized interlocking paver lock to required size as directed by the departmentalofficers of minimum compressive strength of 40n / mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers, sweeping tranporting loading unloading of laying paver block as per standard specification, . , supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc, complete as per standard specification....

Reserve Bank Of India - Tamil Nadu

30397552 1 dismantling of brick masonry rate per unit excl of gst carefully dismantling the existing 230mm 115mm thick brick masonry work along with its plaster of any height and level pl refer to the tender document for detailed description quote rate per unit exclusive of gst 2 2 dismantling of plastering rate per unit excl gst carefully dismantling the plastering work in external internal walls of any thickness at any height and level pl refer to the tender document for detailed description quote rate per unit exclusive of gst 3 3 brick masonry work rate per unit excl gst providing and constructing 230mm thick brick work quote rate per unit exclusive of gst 4 4 waterproof plastering to walls rate per unit excl gst preparation of surface providing and applying 20 to 25mm thick average cement plaster pl refer to the tender document for detailed description quote rate per unit exclusive of gst 5 5 acrylic distemper paint to internal walls ceiling rate per unit excl of gst providing and applying two or more coats of premium interior grade acrylic distemper of approved make and shade as per specifications pl refer to the tender document for detailed description quote rate per unit exclusive of gst 6 6 acrylic interior emulsion paint to internalwallsceiling rateperunit excl of gst providing and applying two or more coats of 100 percent acrylic premium interior grade emulsion paint of approved make and shade pl refer to the tender document for detailed description quote rate per unit exclusive of gst 7 7 acrylic elastomeric exterior waterproofing coating rate per unit excl of gst acrylic elastomeric exterior waterproofing coating on exterior walls pl refer to the tender document for detailed description quote rate per unit exclusive of gst 8 8 acrylic exterior emulsion paint rate per unit excl of gst acrylic exterior emulsion paint to external walls beams ceiling pl refer to the tender document for detailed description quote rate per unit exclusive of gst 9 9 acrylic exterior emulsion paint on roof tiles rate per unit excl of gst acrylic exterior emulsion paint on roof tiles pl refer to the tender document for detailed description quote rate per unit exclusive of gst 10 10 synthetic enamel paint to wood works rate per unit excl of gst providing and applying two or more coats of first quality synthetic enamel paint satin finish of approved make and shade pl refer to the tender document for detailed description quote rate per unit exclusive of gst 11 11 synthetic enamel paint to metal works rate per unit excl of gst providing and applying two or more coats of first quality synthetic enamel paint satin finish of approved make and shade over a coat of zinc chromate primer pl refer to the tender document for detailed description quote rate per unit exclusive of gst 12 12 painting polishing to wardrobes rate per unit excl of gst preparation of surface providing and applying two or more coats of approved make french spirit polish pl refer to the tender document for detailed description quote rate per unit exclusive of gst 13 13 repainting of miscellaneous items rate per unit excl of gst preparing the surfaces by thorough scrapping etc providing and applying two or more coats of appropriate finishes pl refer to the tender document for detailed description quote rate per unit exclusive of gst...

Chennai Petroleum Corporation Limited - Tamil Nadu

29567682 renovation of quarters ( phase 1 ) at cpcls cbr housing complex in nagapattinam, tamilnadu renovation of quarters ( phase 1 ) at cpcls cbr housing complex in nagapattinam, tamilnadu , dismantling tiles: dismantling of antiskid / mosaic / moasaic dado tiles / kitchen counter slabs / kadappa sink etc. along with bed mortar in floors and walls laid in any cement mortar upto first floor including making good the wall, floor and counter surface; stacking of serviceable materials and disposal of unserviceable materials within 1 km lead. , dismantling brickwork: dismantling of brick work of any mortar in foundation and super structure including disposal of unserviceable materials upto 1.0 km lead as directed , dismantling pcc: dismantling pcc cement concrete in foundation and super structure including disposal of unserviceable material upto 1.0 km lead as directed serviceable materials to stores including scaffolding, all labour, tools, supervision, safety permits and safety precaution etc. complete. , dismantling rcc: dismantling reinforced cement concrete in foundation and super structure in all heights including cutting of reinforcement bars, returning of scrap steel to owners scrap yard disposal of unserviceable material upto 2.0 km lead as directed including scaffolding, breaking the rcc work into pieces etc. with all labour, tools supervision, safety permits and safety precaution etc. complete. , dismantling doors / windows: dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking the material at a yard within the refinery premisesas per instruction of engineer in charge , repair and refixing doors: taking out existing wooden door shutter, repair by cutting, providing reapers, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the engineer in charge. , chasing: cutting / making opening / chasing in brick wall / dado for removal of existing corroded gi pipe line / installation of sanitary lines through wall by using cutting / drilling machine. the cost includes removal of old gi lines / existing conduits from walls, cleaning of surface etc. complete including all tools and tackles, labours, materials, disposal upto 2 km lead complete. , plastering: providing 12mm thick plaster in cement mortar 1:4 ( 1 cement : 4 sand ) on walls / concrete surfaces including cleaning, hacking of concrete surfaces, scaffolding, finishing, curing etc., for all heights , brick work: providing and laying brick masonry with bricks ofclass 5.0 in cement mortar 1:4 ( 1 cement and 4 fine aggregate ( m sand ) ) for all depths including the cost of materials, labour, tools and tackles, scaffolding / staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing recesses, finishing the joints flush below ground level , curing, etc. all complete as per specifications, and as directed by engineer in charge. , half brickwork: providing and laying half brick masonry in cement mortar 1 : 4 ( 1 cement : 4 fine aggregate ( m sand ) ) for all depths and heightsincluding cost of materials, labour, scaffolding, sampling, testing, supplying and placing 2 no. 6 mm dia. diarebars at every third course, sealing the gap between masonry and soffit of the beam / slab, embedding the fittings and fixtures, curing, etc. all complete as per specifications, and as directed by engineer in charge. note: the cost of reinforcement shall be paid seperately under relevant items. , rcc:providing and laying in position 1:1.5:3 [ 1cement:1.5 sand: 3 coarse aggeragate ] nominal mix concrete with 20 mm and down aggregatesfor plain cement concrete work with dr. fixit or equivalent water proofing compound as per manufacturer specification. , centering & shuttering: providing and fixingcentering and shuttering for all heights including strutting, bracing, propping, etc. keeping the same in position during concreting and de shuttering & removal of the same after specified period as per specifications, keeping necessary provision for inserts, projecting dowels, or any other fixture, etc. all complete and as specified and directed by engineer in charge complete with all tools and tackles, materials, labour charges, consumables, etc. ( form work shall be supplied by the contractor and shall remain the property of the contractor ) , reinforcement: supplying, fabricating and placing in position high strength deformed steel bar reinforcement of grade fe500 for rcc work, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractors own 16 standard wire gauge ( swg ) black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, overlaps, chairs, spacers, lifting hooks, etc. for all heights & depths, etc. all complete as directed by engineer in charge. , sand: providing & filling m sand of approved quality in floor, foundation etc. in layer of 15cm thickness including, watering, ramming, consolidating etc. complete. , frp door frame: providing and fixing frp frame of 100mm x 75mm with solid wood for doors, windows shutter / frame work with necessary fixtures and fastenings including necessary hold fasts, including making necessary grooves, grouting, including making good all damaged portion done with all labour, material etc. complete. the joints between wall and frp frame to be sealed with frp paste leaving no gaps. , frp door shutters: supplying and fixing of 30mm thick frp door shutters in any colour, it consists of shutter frame made out of country wooden frame ( solid wood ) for stiles, top, bottom and lock rails and wooden frame shall be covered with 4mm thick of frp including providing and fixing of s.s. hinges of 4 inches long 3 nos., aluminum aldrop 150mm long 1 no., aluminum tower bolt 150mm long 2 nos. and pvc door push 50mm long 1 no. and aluminum handles minimum 150 mm long 2 nos. , floor tiles below 600x 600 mm: providing and laying premium polished vitrified floor tiles of size 400x 400 mm or 395 x 395 mm or 300 x 300 mm or more but below 600 x 600 mm, anti skid type / gloss finish of make johnson / kajaria / somany / nitco in any colors and shades as approved & directed by eic, laid on 20 mm thick cement mortar 1: 4 ( 1 cement : 4 fine aggregate ( m sand ) including water proofing compound dr. fixit or equivalent as per manufacturer specification, grouting the joints with white cement and matching pigments etc., & pointing the joints, pointing with white cement and matching pigment etc., complete for all heights. , wall tiles: providing and fixing premium ceramic glazed wall tiles of approximate size 300x 300mm or 300 x450 or more as per direction of eic of approved make johnson, nitco, orient, somany, kajaria or equivalent make in any colours / shades of any size as approved by engineer in charge over 12 thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) , with water proofing compound in liquid form of dr. fixit or equivalent and jointing with grey cement including pointing in white cement mixed with pigment of matching shade including providing necessary pvc edge beading etc. complete for all heights.including matching border & motive tile. , white washing: supplying and applying three coats of white washing with lime including cleaning and surface preparations, scaffolding to any height etc. with all labour and material complete. , interior emuslion:supplying and applying painting the wall with three [ 1 coat primer+full wall putty+ 2 coat paint ] coats of interior acrylic emulsion paint of m / s. asian paints or equivalent in m / s. ici, m / s nerolac, m / s berger etc. brand in any shades and colour with full wall cement based wall putty as directed including cleaning and preperation of the surface, with scraping using suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , exterior emulsion: supplying and applying painting the wall with three [ 1 coat primer+ 2 coat paint ] coats of exterior acrylic emulsion paint of m / s. asian paints apex or equivalent in m / s. ici, m / s nerolac, m / s berger etc. brand in any shades and colour including one coat primer, and filling cracks / gaps with cement based wall putty as directed with all cleaning and preperation of the surface, including scraping using suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , synthetic enamel painting: supplying and applying synthetic enamel paint on ms door frame, window frame, grills, wall etc. with two coat of paint of m / s. berger paints, m / s. asian paints and m / s. ici or equivalent brand in any shades and colour as directed including cleaning and preperation of the surface, with scraping using with suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , kadappa stone slab: supplying and laying of kadappa stone slab 20 mm to 25 mm thick, complete on 20 mm thich cement bed mortar 1:4 including all tools and tackles materials etc. complete. , kadappa sink: supplying and laying of kadappa kitchen sink of size upto 600mm x 600mm to replace the existing damaged kitchen sink at cbr housing complex, of stone thickness 20 mm to 25 mm thick, for replacing the damaged existing counter kitched slabs at cbr housing complex with necessary pointing, cutting etc on 20 mm thich cement bed mortar 1:4, including 32 mm waste coupler coupler and waste hose with all tools and tackles etc. complete. the sink shall be leak proof and edges to be finishes smoothly with necessary metal putties at joints and coupler locations. , upvc pipes for plumbing works: supplying, laying and fixing rigid heavy duty upvc pipe of sch 40 for water line / drain lines of reputed make like ashirvad / tata / finolex / jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union and other specials fittings in floors and walls ( open / concealed type ) with jointing including inserting in wall and fixed with neccessary gi clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. , 3 / 4th inch pipe , 1.0 inch pipe , 1.5 inch pipe , cpvc pipes for plumbing works: supplying and laying 3 / 4 inch cpvc pipe class 1 for hot / cold water plumbing lines of reputed make like ashirvad / tata / finolex / jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union and other specials fittings in floors and walls ( open / concealed type ) with jointing including inserting in wall and fixed with neccessary gi clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. , pvc pipes: supplying, laying and fixing rigid heavy duty pvc pipe for waste water lines conforming to is:4985 of reputed make like tata / finolex / jain or equivalent in floors, walls with necessary specials jointing with synthetic adhesive, supply and fixing with hooks in wooden plugs or embedding in walls and floors, cutting pipes to required lengths, making connections, cutting, testing, etc. complete. , 2.5 inch pipe , 4 inch dia pipe , insect screens: supplying and fixing of insect screens with shutter type doors ( aluminium with ss mesh ) with all rippers, locks, handles hinges etc.with all materials and labours etc. complete such that there is nogaps between existing window / ventilator frame for insects / mosquitoes;for all heights etc., complete. , replacement of damaged glass in windows / ventilators: renewing glass panes and refixing existing wooden fillets: float glass panes of nominal thickness 5.5 mm plain glass using putty / wooden beading / rubber beading for all heights. , replacement of ventilator shutters: removing of existing ventilator shutters and refixing new ventilator shutters of country wood ( padak or kongu ) frame with 5.5 mm thick glass, with two coats of synthetic enamel paint over a coat of primer on the shutter frame, with necessary hinges, tower bolt, handles etc. complete. the new shutter fitted should properly sit on the existing frame without any gap. , wooden frames: providing and fixing i class country wooden frame of doors shutter / frame, window shutter / frame, cupboards and air conditioners frame work with necessary fixtures and fastenings including necessary hold fasts, applying two coats of coal tar preservatives on the sides in contact with wall for frame including scantling, making necessary grooves, grouting, including making good all damaged portion done with all labour, material etc. complete. including removing the old damaged wooden / steel frame and door / window shutter and disposing the same etc., complete for all heights. , wooden doors: supplyingandfixing inposition35mm thick single or double leaf fullpaneled woodenshutters of firstclasscountry wood, consistingof bottomrail 250mm wide, lock rail 150mm wide and remaining shall be 100mm wide, fixed with panels of 25mmthick wooden planks / navopan sheetsincludingwith black enameled ms butt hinges with necessary screws, providingtwocoats of syntheticenamelpaint over acoatof primer etc., complete. , flush doors: providing and fixing isi marked flush door shutters conforming to is: 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35mm thick including isi marked stainless steel butt hinges with necessary screws. , mortice lock:supplying and fixing of godrej 6 levers mortice lock model no. gloria 240mm door handles model no. 8166 or equivalentconsisting of 24 cm double side door handles ( 2c ) , door lock plate, double lock cylinder. the cost shall include supplying and fixing of the door lock, including removal of existing mortice lock fittings etc. complete. , aldrop 12: providing and fixing stainless steel 12 aldrops, size 5mm of grade 304 and of approved design , aldrop 6: providing and fixing stainless steel 6 aldrops, size 5mm of grade 304 and of approved design , tower bolt 10: providing and fixing stainless steel tower bolts of grade 304 and size 10 of approved make , tower bolt 6: providing and fixing stainless steel tower bolts of grade 304 and size 6 of approved make , door handles: providing and fixing minimum 250mm stainless steel door handles of grade 304 of approved design , door bush: supplying and fixing ofpvc door bush 50mm long with necessary screws and fixtures , door stopper: supplying and fixing of ss magnetic door stopper wall mounted , door calling bell: supplying and fixing of sterophonic door calling bell wall mounted , western water closet ( ewc ) : providing and fixing white vitreous china pedestal type water closet ( western type ) water closet pan of dimensions 570 x 365 x 400mm make johnson ( model no. p0547pw ) / hindware / parryware or equivalent along with necessary trap, fittings, with 10 litre low level white p.v.c. flushing cistern, including flush pipe, seat covers, with manually controlled device ( handle lever ) , conforming to is :7231, with all fittings and fixtures, angle valve, hose complete, including cutting and making good the walls and floors wherever required :including dismantling of exisitng iwc / ewc, clearing sand cushion, p & s trap, connecting pipe linesand disposing the unserviceable material at the designated place of disposal including all labour tools, etc. complete. , ewc seat covers: providing and fixing ewc seat covers in ivory color suitable for hindware / parryware / johnson with all and fixtures, complete, to suit the existing ewcincluding all labour tools, dismantling of existing seat covers etc complete , indian water closet ( iwc ) : providing and fixing white vitreous orissa pedestal type water closet ( indian type w.c. pan model no. parryware dimensions 580x445x300 mm or equivalent ) with 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is :7231, with all fittings and fixtures, angle valve, hose complete, including cutting and making good the walls and floors wherever required :including dismantling of exisitng iwc / ewc, clearing sand cushion, p & s trap, connecting pipe linesand disposing the uncerviceable material at the designated place of disposal including all labour tools etc complete , flush tank for ewc / iwc: providing and fixing white 10 litre low level white p.v.c. flushing cistern, with manually controlled device ( handle lever ) , conforming to is :7231, with all internal sets i.e float, valve etc completeand disposing the uncerviceable material at the designated place of disposal including all labour tools etc complete , 3 / 4th inch brass gate valve:supplying, and fixing brass gate valve of 3 / 4 dia of ego / leader or equivalent make for all heights including making necessary isolations etc. complete , 1 inch brass gate valve:supplying, and fixing gun metal gate valve of 1 dia of ego / leader or equivalent make for all heights including making necessary isolations etc. complete , 1.5 inch brass gate valve:supplying, and fixing gun metal gate valve of 1.5 dia of ego / leader or equivalent make for all heights including making necessary isolations etc. complete , hand wash basin: proving and fixing white vitreous china wash basin of approximate size 560x430x185 mm of make johnson ( model no. p5115pw ) / hindware / parryware or equivalent as directed by eic along with 600 mm waste hose, cp brass waste coupler, ange valve ( johnson model no. t3410c or equivalent of reputed make ) , fisher bolts / clamps etc complete. , oval type hand wash basin: proving and fixing white vitreous china wash oval basin counter top type of approximate size 560x455x200mm of make parryware lead n ( c0483 ) model or equivalent in johnson / hindware / jaguar / roca etc. or equivalent as directed by eic along with 600 mm waste hose, cp brass waste coupler, ange valve ( johnson model no. t3410c or equivalent of reputed make ) , etc complete. , wash basin tap: supplying and fixing of pillar cock of make jaguarfon chr 40011 or equivalent , shower rose with shower arm: providing and fixing shower arm ( s0001c7 ) and shower rose 200 mm dia ( s1731c ) of make johnson or approved equivalent as directed by eic , health faucet: supply and fixing cp health faucet coated with ss finish of make johnson ( model no. s0030c ) or approved equivalent as directed by eic with necessary fittings, hose and labor etc. complete , braided hose for geyser connection: supply and fixing polymer braided connecting hoses with washers, rings fixtures etc. for hot or cold water from geyser etc. of jaguar / watertech or equivalent make as directed by eic with necessary fittings, etc. complete , h nipples: supply and fixing of gi h nipple threaded of size 1 / 2 inch for plumbing fitting as directed by eicetc. complete , two in one tap: supply and fixing of make two in one tap of make johnson ( model no. sku fon chr 40149 ) or approved equivalent as directed by eic with necessary fittings, labor etc. complete , 3 in 1 wall mixture taps for bathroom: supply and fixing of 3 in 1 jaguar make wall mixure taps model no. fus 29281 or approved equivalent as directed by eic with necessary fittings, labor etc. complete , bib cock : supply and fixing bib cock of make jaguar ( model no. vgu 81037 ) or approved equivalent as directed by eic with necessary fittings, labor etc. complete , kitchen sink tap : supply and fixing wall mounted kitchen sink tap of make jaguar ( model no.drc 37347s ) or approved equivalent as directed by eic with necessary fittings, labor etc. complete , gi pu coated wire: supplying and fixing of 2mm gi pu coated wire for cloth hangers on the available posts , mirror: providing and fixing 600 x 450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with cp brass screws and washers complete. , glass shelf: providing and fixing 600x120x5 mm glass shelf of toughned glass with edges round off, supported on anodised aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. , corner stand: supplying and fixing offrosted glass toughened corner stand ( wall mounted ) chrome plated railings in bathroom of minimum size 12 inch x 12 inch including all fittings and fixtures etc. complete. , granite counters / partitions: providing and fixing granite stone of approved shade slab with table rubbed, edges rounded and polished, nosing ) for fixing in urinal partitions / granite counters including making all chasing of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size ) as per direction of engineer in charge and finished smooth , floor trap :supplying and fixing of heavy duty 4 dia 2 way / 4 way pvc multi floor traps without jali of reputed make i.e. finolex or equivalent , cockroach trap: supplying and fixing of heavy duty 4 ss 304 grade cockroach trap with necessary jali, cup, trap etc. complete , towel rod: supply and fixing of towel rod in ss 304 of make johnson ( model no. t1350c ) or equivalent as per eic , bottle trap: supply and fixing of bottle traps of make johnson ( model no. t0060c ) or equivalent for wash bash basinas per direction of eic , waste hose: supply and fixing of flexible waste hose forconnecting to sink / wash bash basinas per direction of eic , cp waste coupler: supply and fixing of 40mm dia cp waste couplerforconnecting to sink / wash bash basinas per direction of eic , angle valve: supply and fixing of angle valve of make johnson ( ange valve ( johnson model no. t3410c or equivalent of reputed make ) for geysers oras per direction of eic , curtain rods: supplying and installation of cp curtain rods 20 mm diameter with 100 mm long cp brackets ( 2 nos. ) for each room windows. , navopan: providing and fixing of 25 mm thick navopan both side colour laminated sheets as per the manufactures specification, including cutting, fixing in position, to wooden door shutters removing the damaged old navopan sheet with all labours and materials etc., complete. for all heights. , cub board locks: supplying and fixing of locks with 2 keys for cub boards of goodrej or equivalent make. , polymer modified repair mortars: repairing surface irregularities: damaged concrete, if any, with latex modified repair mortarof make fosroc / basf / sika including a coat of bonding agent at required places or defects in concrete surfaces. , bond coat: providing and applying approved epoxy resin ( prepared as per manufacturers recommendation ) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiseling, taking off the skin of concrete, application of epoxy resin system by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete. , water proofing of structure: providing injection type post construction water proofing to concrete structures such as roof slabs, sunken portions, intersection of chajja & masonry, liquid storage tanks, etc. by installing minimum 12 / 15mm dia pvc / aluminium / gi nozzles at suitable intervals and mechanically injecting epoxy injection grout of approved make at minimum pressure of 3 kg / sqcm as per manufacturers recommendations. the rate shall include all materials, labor and operations and finishing, dismantling & assembling of false ceiling / under deck insulation works if any, making temporary water pool over the leaky portion and removal after work, include the cost of providing fixing and cutting off nozzle projections grouting holes, etc. complete as per the instructions of engineer in charge. ( only consumed chemical in grouting work to be measured for payment ) , mosaic polishing: mosaic floor cleaning, grinding and polishing to obtain mirror finishing using suitable abarsions and chemicals and grinding / polishing machines for all floors, dado upto 2nd floor height , roof sheet dismantling: dismantling gi / asbestos / translucent sheets, ridges, gutters, curves, turbo ventilators, etc. in roofings and wall claddings, including supply of all tools & tackles, consumables, cutting ( by flame or saw ) of fixing hooks, transporting and stacking the serviceable materials, cleaning the site and disposal / handing over of the unserviceable material to scrap yard anywhere within the refinery premises, including all labor, tools all complete for all levels, as specified and directed. , roof sheet providing: providing and fixing color coated licensee galvalumeprofile sheetsof total coated thickness thickness ( not less than ) 0.5 mm of approved make as certified by biec international, inc. the sheet shall be fixed using self drilling / self tapping screwsof size ( 5.5x 55 mm ) with epdm seal / bolts of assorted sizes as directed by eic, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, all labor, tools supervision, height work / safety permits, safety precaution all complete for all levels, as specified and directed. ( size, shape and pitch of corrugation as approved by eic ) . nominal composition of the coating is 55% aluminum, 43.5% zinc and 1.5% silicon by a continuous hot dip process. corrosion inhibitive primer and a top coat should have been applied on either side of the sheet. for all roof areas including curved profile sheets for corners , ridge sheets: providing and fixing color coated licensee galvalume sheet ridges plain ( 500 600mm ) of total coated thickness thickness ( not less than ) 0.5 mm of approved make as certified by biec international, inc, using self drilling / self tapping screws, all labor, tools supervision, height work / safety permits, safety precaution all complete for all levels, as specified and directed. nominal composition of the coating is 55% aluminum, 43.5% zinc and 1.5% silicon by a continuous hot dip process. corrosion inhibitive primer and a top coat should have been applied on either side of the sheet. , anchor fastening: supplying, handling, transporting to site of work and fixing approved chemical anchor fasteners consisting of ms threaded rod of grade 5.8, galvanised with minimum thickness of 5 microns and chemical ( approved for use in cracked concrete ) , packed in flexible chemical foil or dual foil type, to be used with the help of dispenser, of 16 mm dia at specified positions on concrete floors, roofs, beams ( sides and bottom ) , walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing , necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed by engineer in charge. , post contruction termite treatment: providing and injecting chemical emulsion for post constructional anti termite treatment using chemical imidacloprid 30.5% sc at 2.1ml per litre of water covering entire building internal as well as external wall. the quoted rate shall be inclusive of all tools, tackles, labours, chemical / material cost etc complete. , repair of water tanks: repairing existing leaking overhead tanks of individual buildings by chipping of damaged and cracked plastered surface, plastering finishing the surface with epoxy mortar and frp lining with food grade resin on the inner surface of the tanks to make the tank leak proof. corners and around the pipes the lining to be done such that grooves are suitable filled. , laying of weather proof tiles:providing and laying cool roof tiles ( as per approved pattern, not less than 8mm thickness and of approved size ) on roofs jointed with cement mortar 1:4 ( 1 cement ; 4 fine aggregate ( m sand ) ) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 ( 1 cement ; 4 fine aggregate ( m sand ) ) and finished neat & complete with white cement ( supply of white cement is in contractors scope ) . , cleaning of sludges: cleaningof septic tanks / aeration tanks including removal of sludge with excrete, bottom sediments and waste water inallchambers, pumping, disposalof sludge with excrete, bottom sediments and waste water in a remote area within the housing complex premises;providingtemporary blockandarrangements topump outthe incoming sewageto suitableplacesas directed by engineer in chargeincluding removingandrefixing of alltypesof covers / coverslabs inposition, making freeallin and outlet lines, alllabors, tools, and tackles etc., complete. , upvc windows: providing and fixing factory made upvc white color windows of reputed make of fenesta / prominance / kommerlings or equivalent make windows shall be shutter type with arrangements of glazed ( 4mm tough glass ) cum ss insect screen shutters i.e.fly proof ss wire mesh ( 2 nos. glazed and two nos. wire mesh panels ) , as per scope with clear toughened glass of saint gobain / hng with all necessary fixtures, window frames, accessories etc. complete including all transportationf tools and tackles, labours etc. , micro concreting: providing and placing in position micro concrete of grade m50, which shall be cmement based pre packed single component, chloride free, non shrink, free flow, self compacting, ready to use after mixing waterin specified proportion obtained from approved manufacturer as per specification and direction of engineer in charge ( payment for this item shall be made only after proper wet curing and surface will be evaluated by sounding / tapping with a blunt metal instrument ) . , app membrane 4 mm thick: providing and laying 4 mm thick app ( atactic polypropylene ) modified reinforced gravel coated rough finish bituminous water prooofing membrane over terrace and parapet including cleaning and preparation of the surface consisting of making good all the cacks and damages, filling potholse / depressions, removing weak foam concrete plaster and refilling with same wherever required thus preparing smooth surface of the terrace, providing and applying one coat of cold applied bitumen based primer @0.2 to 0.4 litre per sq.m, laying of the membrane by torch welding over the primer providing 100mm overlaps and approriately pressing the membrane to remove any entraped air after providing 10mmx20mm continous groove in parapet for terminating the membrane and filling the groove with polyurethane sealants and continiuing this treatment at rain water outlet points, providing finishing protective layer of 35mm thick pcc ( 1:2:4 ) in panels of size 1.2mx1.2m chequered finish with 24swg chicken wiremesh interposed between finished smooth with joints between panels with suitable polyuretahe sealants, providing fillets of 75mm radius with pcc ( 1:2:4 ) at junctions of horizontal and vertical surfae finished smooth, curing etc. at complere as per approved manufacturers standard specification and recommendations. , skilled & unskilled workmen: supply of skilled and unskilled various crafts men to carry out petty works not acessable for measurements / minor repair works, on day to day basis from 08:30 to 17:30. the rate shall include payroll costs, all allowance, fringe benefits overhead supervision and profits and hand tools including working onsundays and national holidays , skilled , unskilled...

Indian Rare Earths Limited - Tamil Nadu

29544717 1 dismantling, lowering existing sheets as per sl.no.1 of scope of work dismantling, lowering the existing a.c. / aluminium sheets / frp corrugated sheet / durashine powder coated sheet from roof / side cladding of the buildings without any damage either for repairing the existing steel roof trusses & purlins or replacing the damaged sheets, etc. and re fixing the same area with new 0.47mm thick powder coated sheet / powder coated end curved sheet [ tata durashine / jsw colouron+ ( blue / red ) ] with 8mm dia g.i. polymer coated bolts & nuts to suit the existing m.s. angle / channel, purlin, including necessary scaffolding, etc. complete as per standard specification and as directed by engineer in charge. 2 2 dismantling and removing of damaged steel structuralas per sl.no.2 of scope of work dismantling and removing of damaged steel structural fully / partly such as roof / side cladding, purlin, trusses, bracings, columns & gates, well structural cover etc. and re fixing the damaged members of dismantled structures with dismantled good steel members ( necessary fabrication to be done if required ) / new fabricated steel structures ( under item no.3 ) with welded / bolted joints with the existing structures, including necessary scaffolding, etc. upto 15m height from floor level as directed by the engineer in charge ( rate excluding the cost of good re usable steel & new fabricated steel under item no.3 ) . 3 3 supply of steel and fabricating as per sl.no.3 of scope of work supply of steel and fabricating the portion / full of truss / purlins / bracing / columns / gates / well structural cover, etc including cutting, welding, jointing to suit the dismantled portion for replacing the worn out members of the existing trusses / purlins / bracings / column / gates / well steel structure or full members, etc. complete as directed by engineer in charge. ( rate including cost of all materials ) ( structural steel conforming to is 2062:2011 of make tisco / sail / rinl ) 4 4 supplying and painting two coats with epoxy smoke grey paint as per sl.no.4 of scope of work supplying and painting two coats with epoxy smoke grey paint ( asian / berger / shalimar ) over a coat of epoxy zinc chromate / zinc phosphate primer ( asian / berger / shalimar ) including chipping, scrapping, removing the dirt, cleaning the surface, including necessary scaffolding arrangements, etc., complete as directed by engineer in charge. 5 5 dismantling, removing the existing damaged sheet as per sl.no.5 of scope of work dismantling, removing the existing damaged and corroded m.s sheet / pvc sheet / panels of the existing well cover; with supplying, fabricating and fixing in position of 2mm thick chequered aluminium ( jindal / hindalco ) sheet in lieu of existing sheet with necessary 8mm dia g.i. polymer coated bolts & nuts / bolting & clamping arrangements with the existing frame, etc. including fixing 25x5mm gi flat all around welded the same with the existing frame with necessary opening arrangements, and necessary scaffolding arrangements, etc. complete, as directed by the engineer in charge. 6 6 dismantling , lowering existing aluminium / ac sheets as per sl.no.6 of scope of work dismantling, lowering the existing aluminium / ac sheets from ridges of the buildings / panels of the existing well cover without any damage either for repairing the existing steel roof trusses & purlins or replacing the damaged sheets, etc. with supplying & re fixing the same ridges area / valley gutters / well cover with new aluminium sheet ( 0.71mm thick and 900 mm wide ) ( hindal co everlast / vedanta balco ) with 8mm dia g.i. polymer coated bolts & nuts / bolting & clamping arrangements to suit the existing m.s. angle / channel, purlin, etc. including fixing 25x5mm gi flat all around welded the same with existing frame with necessary opening arrangements, etc.complete as per standard specification and as directed by engineer in charge 7 7 supply and installation of false ceiling as per sl.no.7 of scope of work supply and installation of anutone ( or ) equivalent brand of acoustical false ceiling of sisoli serene / slate spirts / slate polka mineral fibre / grg core ceiling / calcium silicate tiles of sizes mentioned as per sl.no.7 of scope of work. 8 8 supplying and fixing upvc windows as per sl.no.8 of scope of work supplying and fixing upvc ( un plasticized polyvinyl chloride ) windows: providing and fixing of casement type ( open ) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with gi / 1mm 125gsm and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.mentioned as per sl.no.8 of scope of work. 9 9 supplying and fixing upvc door as per sl.no 9 of scope of work supplying and fixing upvc ( un plasticized polyvinyl chloride ) door: providing and fixing of casement doors fabricated from un plasticized polyvinyl chloride ( upvc ) sections. profiles: the profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.mentioned as per sl.no.9 of scope of work. 10 10 earthwork excavation for foundation as per sl.no.10 of scope of work earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 3m including refilling etc., complete as per the direction of the engineer in charge. 11 11 supplying, providing and laying brick masonry as per sl.no.11 of scope of work supplying, providing and laying brick masonry in cm 1:6 using 1st class well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls / kerb wall / drainage wall / partition wall from 1m below ground level to 3 m above ground level including all scaffolding, staging, curing, etc. complete complying with standard specification and as directed by the engineer in charge. 12 12 supplying, providing and laying pcc as per sl.no.12 of scope of work supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, well compaction, levelling, consolidation, curing, scaffolding, etc. complete as per standard specification and as per the direction of engineer in charge. 13 13 supplying, providing and laying pcc as per sl.no.13 of scope of work supplying, providing and laying pcc 1:2:4 mix for foundation / flooring / kerb wall / drainage wall work using 20mm and below grade hard blue granite jelly including all form works, mixing, laying, well compaction, levelling, consolidation and curing, etc. complete as per standard specification and as per the direction of engineer in charge. 14 14 supplying, plastering with cm 1:4 mix as per sl.no.14 of scope of work supplying, plastering with cm 1:4 mix 15 20mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 8m height with neat pointing and necessary grouting and scaffolding arrangements, etc. complete as per standard specification and as per the direction of engineer in charge. 15 15 supply of paints and painting as per sl.no.15 of scope of work supply of paints and painting one coat with emulsion paint ( asian / berger / shalimar / nippon ) 1st quality of approved shade for the external / internal masonry surface upto 10m height from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying wall primer & putty touch up works wherever required etc complete as directed by the engineer in charge. 16 16 supplying and fixing of half round 6 kg pvc roof water drain gutter as per sl.no.16 of scope of work supplying and fixing of half round 6 kg pvc roof water drain gutter ( 160mm dia ) fixing on one side of the roof / wall with suitable clamps, and necessary fittings, elbow, bend, coupling, solvent cement, etc. including end of the gutter fixing with down fall 160 mm dia 4 kg pvc collecting pipe ( finolex / ashirvad ) connecting upto the end of rainwater harvesting pit to drain the rain water with suitable clamps and necessary fittings elbow, bend, coupling, solvent cement, scaffolding arrangements, etc. complete as per the direction of engineer in charge. 17 17 supplying, providing and laying pressed modern clay tiles as per sl.no.17 of scope of work supplying, providing and laying pressed modern clay tiles of mangalore / kerala ( as per approved pattern 15 20 mm nominal thickness of approved size ) with necessary special tiles for ridges and hips, on roofs jointed with cement mortar 1:4 ( 1 cement: 4 coarse sand ) mixed with 2% integral water proofing compound ( sika / perma used as per the desired ratio of manufactured product ) , laid over a bed of 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) with proper grouting, curing and finished neat complete, etc. including dismantling the existing roof tiles and cement mortar with neat cleaning all necessary scaffolding and dumping the debris within a lead of 200m etc. as per the standard specifications and as per the direction of engineer in charge. 18 18 engagement of mason for miscellaneous work as per sl.no 18 of scope of work engagement of mason for miscellaneous work such as masonry repair works etc. complete as directed by the engineer in charge ( required materials will be issued by company on free of cost ) . 19 19 engagement of labour mazdoor for miscellaneous work as per sl.no 19 of scope of work engagement of labour ( mazdoor ) for miscellaneous work such as assisting the mason for repair works, etc. complete as directed by the engineer in charge. ( required materials will be issued by company on free of cost ) ....

Town Panchayats - Tamil Nadu

29090365 15th finance commision basic grant (untied) 2nd installment 2020 2021 maintenance of beautification of nallathaneer oorani (thiru oorani) in kandanur town panchayat. , laying , earthwork excavation for foundation to the full depth as may be directed by departmental officers in all types of soils except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary, refilling the sides of foundation with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth in the places shown by the departmental officers with initial lead of 10 meters and initial lift 2 metres and clearing and levelingthe site etc.complete complying with standard specification. , plain cement concrete 1:4:8 mix (one part cement, four part sand and eight part of aggrigate) using 40 mm size iss hbg metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. laying and curing etc., complete as per tndss no : 28 & vi (s2) vi (s5a) vii standard specifications as directed by engineer incharge. , supplying and laying precast designer paver block confirming to is 1568 2006 specification manufacturing and laying standard of m40 grade 63 mm thick (table clauses 5 and 9.14) ., including the cost and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 100mm thickconveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete isi 15658 2006. , exterior emulsion paint two coats with good quality of approved emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., complete as per standard specificationsfor 10 sqm , supplying and planting border plants like duranta /alamenda/ mini lxora at 150 mm c/c in zig zag manner well grown and maintained in polythene bags at nusery with nesessary manure etc., complete as directed by the engineer incharge.. , supplying and planting avenue tree saplings / flowering / ornamental shrubs including application of chemicals,pesticides and planting in position. the rate is inclusive of cost of plants,pesticides, labour, conveyance, watering and tools etc., complete and as directedby the engineer in charge. , supplying and planting the curtain creepers including application of chemicals,pesticides and planting in position. the rate is inclusive of cost of plants,pesticides, labour, conveyance, watering and tools etc., complete and as directedby the engineer in charge. , supply and fixing of stone bench with chair type and fully dressed stone of size length 1.50 m breadth,0.45 m total height 0.80 m including cost and conveyance of all materials and labour charges etc., completed , providing and fixing fibre made animal statue of height not less than 1.25 mtr etc., complete , supplying and laying of 2 x 10 sq mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 198 , supplying and laying of 4 x 10 sq mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 202 , supplying and laying of 3.5 x 95 sq mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 208 , wiring with 2 x 6 sq mm (84/0.3) pvc insulated sc unsheathed cu.conductor of 1100 v grade in suitable pvc rigid pipe on wall and ceiling with continious earth connection of 14 swg tc wire with painting of suitable color sd 59 , supply and erection ofstreet lighting system 6 meter pole height with ug cable and accessories including installation charges etc., complete (as per lowest quotation) sd 101...

Chennai Petroleum Corporation Limited - Tamil Nadu

28921788 renovation of executive hostel rooms ( 50 nos. ) at cpcls cbr in nagapattinam, tamilnadu , civil works ( item no.10 to 890 ) earth work in excavation earth work excavationin all types of soil, includingsoft or hard murrum, but excluding soft and hard rock, using mechanical means ( hydraulic excavators ) / manually for depth upto 1.5m, including cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, and stacking of excavated material within a lead of 100m, including providing temporary supports to existing facilities, viz., service lines like pipes, cables, etc. all complete as per the specifications and directions of engineer in charge. , dismantling of tiles: dismantling of antiskid / mosaic / moasaic dado tiles along with bed mortar upto 20 mm thick in floors and walls laid in any cement mortar upto second floor stacking of serviceable materials and disposal of unserviceable materials within 1 km lead including all scaffoldings, tools and tackles etc. complete , dismantling of brick work: dismantling of brick work / lime mortar / weathering course of any mortar in foundation and super structure including disposal of unserviceable materials upto 1 km lead as directed . , dismantling of pcc: dismantling pcc cement concrete in foundation and super structure including disposal of unserviceable material upto 1.0 km lead as directed including all labour, tools, scaffoldings etc. complete. , making chasing in walls: cutting / making opening / chasing in brick wall / dado for removal of existing corroded gi pipe line / installation of sanitary lines through wall by using cutting / drilling machine. the cost includes removal of old gi lines from walls, cleaning of surface etc. complete including all tools and tackles, labours, scaffoldings, materials and disposing upto 1 km lead. , plastering: providing 12mm thick plaster in cement mortar 1:4 ( 1 cement : 4 sand ) on walls / concrete surfaces including cleaning, hacking of concrete surfaces, scaffolding, finishing, curing etc., for all heights. , brick masonary: providing and laying brick masonry with bricks of class 7.5 in cement mortar 1:4 ( 1 cement: 4 fine aggregate ( m sand ) ) for allheightsincluding the cost of materials, labour, tools and tackles, scaffolding / staging, sampling and testing, soaking of bricks, cutting and laying of bricks, making openings of any shape and size, sealing the gap between masonry and soffit of beam / slab, embedding the fittings, curing, etc. all complete as per specifications, and as directed by engineer in charge. , half brick masonary :providing and laying half brick masonry in cement mortar 1 : 4 ( 1 cement : 4 fine aggregate ( m sand ) ) for all depths and heightsincluding cost of materials, labour, scaffolding, sampling, testing, supplying and placing 2 no. 6 mm dia. diarebars at every third course, sealing the gap between masonry and soffit of the beam / slab, embedding the fittings and fixtures, curing, etc. all complete as per specifications, and as directed by engineer in charge. ( note: the cost of reinforcement shall be paid seperately under relevant items ) . , pcc: providing and laying plain cement concrete 1:4:8 ( 1 part of cement, 4 part of fine aggregate ( m sand ) and 8 part of stone aggregate 40 mm nominal size ) in foundation below footing floor and raft and trenches using stone aggregate including watering, curing ramming with vibrator if necessary all labor and material complete ) as per direction of engineer in charge but excluding cost of form work , rcc: providing and laying in position 1:1.5:3 [ 1cement: 1.5 sand: 3 coarse aggeragate ] nominal mix concrete with 20 mm / 12.5 mm and down aggregatesfor reinforced cement concrete work with dr. fixit or equivalent water proofing compound as per manufacturer specification for all heights including all labours, tools and tackles, curing etc. complete , centering & shuttering: providing and fixingcentering and shuttering for all heights including strutting, bracing, propping, etc. keeping the same in position during concreting and de shuttering & removal of the same after specified period as per specifications, keeping necessary provision for inserts, projecting dowels, or any other fixture, etc. all complete and as specified and directed by engineer in charge complete with all tools and tackles, materials, labour charges, consumables, etc. ( form work shall be supplied by the contractor and shall remain the property of the contractor ) , reinforcement: supplying, fabricating and placing in position high strength deformed steel bar reinforcement of grade fe500 for rcc work, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractors own 16 standard wire gauge ( swg ) black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, overlaps, chairs, spacers, lifting hooks, etc. for all heights & depths, etc. all complete as directed by engineer in charge. , m sand: providing and filling fine aggregate ( m sand ) of approved quality in floor, foundation etc. in layer of 15 cm thickness including, watering, ramming, consolidating etc. complete. , frp frame: providing and fixing frp frame of 100mm x 75mm with solid wood for doors, windows shutter / frame work with necessary fixtures and fastenings including necessary hold fasts, including making necessary grooves, grouting, including making good all damaged portion done with all labour, material etc. complete. the joints between wall and frp frame to be sealed with frp paste leaving no gaps. , frp door shutters: supplying and fixing of 30mm thick frp door shutters in any colour, it consists of shutter frame made out of country wooden frame ( solid wood ) for stiles, top, bottom and lock rails and wooden frame shall be covered with 4mm thick of frp including providing and fixing of s.s. hinges of 4 inches long 3 nos., aluminum aldrop 150mm long 1 no., aluminum tower bolt 150mm long 2 nos. and pvc door push 50mm long 1 no. and aluminum handles minimum 150 mm long 2 nos. , floor tiles of size 600 x 600 mm and above : providing and laying premium quality polished vitrified floor tiles of size 600 x 600 mm and above matt or gloss finish of make johnson / kajaria / somany / nitco in all colors and shades approved by eic, laid on 20 mm thick cement mortar 1: 4 ( 1 cement : 4 fine aggregate ( m sand ) ) including water proofing compound dr. fixit or equivalent as per manufacturer specification, grouting the joints with white cement and matching pigments etc., & pointing the joints, pointing with white cement and matching pigment etc., complete for all heights. , floor tiles below 600x 600 mm: providing and laying premium polished vitrified floor tiles of size 400x 400 mm or 395 x 395 mm or 300 x 300 mm or more but below 600 x 600 mm, anti skid type / gloss finish of make johnson / kajaria / somany / nitco in any colors and shades as approved & directed by eic, laid on 20 mm thick cement mortar 1: 4 ( 1 cement : 4 fine aggregate ( m sand ) including water proofing compound dr. fixit or equivalent as per manufacturer specification, grouting the joints with white cement and matching pigments etc., & pointing the joints, pointing with white cement and matching pigment etc., complete for all heights. , wall tiles: providing and fixing premium ceramic glazed wall tiles of approximate size 300x 300mm or 300 x450 or more as per direction of eic of approved make johnson, nitco, orient, somany, kajaria or equivalent make in any colours / shades of any size as approved by engineer in charge over 12 thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) , with water proofing compound in liquid form of dr. fixit or equivalent and jointing with grey cement including pointing in white cement mixed with pigment of matching shade including providing necessary pvc edge beading etc. complete for all heights.including matching border & motive tile. , white washing: supplying and applying three coats of white washing with lime including cleaning and surface preparations, scaffolding to any height etc. with all labour and material complete. , interior emuslion:supplying and applying painting the wall with three [ 1 coat primer+full wall putty+ 2 coat paint ] coats of interior acrylic emulsion paint of m / s. asian paints or equivalent in m / s. ici, m / s nerolac, m / s berger etc. brand in any shades and colour with full wall cement based wall putty as directed including cleaning and preperation of the surface, with scraping using suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , exterior emulsion: supplying and applying painting the wall with three [ 1 coat primer+ 2 coat paint ] coats of exterior acrylic emulsion paint of m / s. asian paints apex or equivalent in m / s. ici, m / s nerolac, m / s berger etc. brand in any shades and colour including one coat primer, and filling cracks / gaps with cement based wall putty as directed with all cleaning and preperation of the surface, including scraping using suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , synthetic enamel painting: supplying and applying synthetic enamel paint on ms door frame, window frame, grills, wall etc. with two coat of paint of m / s. berger paints, m / s. asian paints and m / s. ici or equivalent brand in any shades and colour as directed including cleaning and preperation of the surface, with scraping using with suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , enamel primer: supplying and applying 1 coat zinc chromate primer of m / s. berger paints, m / s. asian paints and m / s. ici or equivalent brand in any shades and colour as directed including cleaning and preperation of the surface, with scraping using with suitable emery sheet, scaffolding toany height with all labour and material etc. complete. , upvc pipes for plumbing works: supplying, laying and fixing rigid heavy duty upvc pipe of sch 40 for water line / drain lines of reputed make like ashirvad / tata / finolex / jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union and other specials fittings in floors and walls ( open / concealed type ) with jointing including inserting in wall and fixed with neccessary gi clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. , 3 / 4th inch pipe , 1.5 inch pipe , 2.0 inch pipe , cpvc pipes for plumbing works: supplying and laying 3 / 4 inch cpvc pipe class 1 for hot / cold water plumbing lines of reputed make like ashirvad / tata / finolex / jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union and other specials fittings in floors and walls ( open / concealed type ) with jointing including inserting in wall and fixed with neccessary gi clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. , pvc pipes for plumbing works: supplying, laying and heavy duty pvc pipe 6 kg pressure for plumbing lines of reputed make like tata / finolex / jain or equivalent in floors, walls with necessary specials jointing such as bends, elbows, tees, reducers, sockets, union, door type tees / ys / bend and other specials fittings in floors and walls ( open / concealed type ) with jointing including inserting in wall and fixed with neccessary gi clamps, cutting the pipes to required length making connections, threading, or holes in wall and making good the same and testing etc. complete. , 2.5 inch dia pipe , 4 inch dia pipe , 2 brass gate valve: supplying, and fixing brass gate valve of 2 dia of ego / leader or equivalent make for all heights including making necessary isolations etc. complete , hand wash basin: proving and fixing white vitreous china wash basin of approximate size 560x430x185 mm of make johnson ( model no. p5115pw ) / hindware / parryware or equivalent as directed by eic along with 600 mm waste hose, cp brass waste coupler, ange valve ( johnson model no. t3410c or equivalent of reputed make ) , fisher bolts / clamps etc complete. , oval type hand wash basin: proving and fixing white vitreous china wash oval basin counter top type of approximate size 560x455x200mm of make parryware lead n ( c0483 ) model or equivalent in johnson / hindware / jaguar / roca etc. or equivalent as directed by eic along with 600 mm waste hose, cp brass waste coupler, ange valve ( johnson model no. t3410c or equivalent of reputed make ) , etc complete. , wash basin tap: supplying and fixing of pillar cock of make jaguarfon chr 40011 or equivalent , shower rose with shower arm: providing and fixing shower arm ( s0001c7 ) and shower rose 200 mm dia ( s1731c ) of make johnson or approved equivalent as directed by eic , health faucet: supply and fixing brass health faucet coated with ss finish of make johnson ( model no. s0030c ) or approved equivalent as directed by eic with necessary fittings, hose and labor etc. complete , braided hose for geyser connection: supply and fixing polymer braided connecting hoses with washers, rings fixtures etc. for hot or cold water from geyser etc. of jaguar / watertech or equivalent make as directed by eic with necessary fittings, etc. complete , h nipples: supply and fixing of gi h nipple threaded of size 1 / 2 inch for plumbing fitting as directed by eicetc. complete , two in one tap: supply and fixing of make two in one tap of make johnson ( model no. t0412c ) or approved equivalent as directed by eic with necessary fittings, labor etc. complete , glass shelf: providing and fixing 600x120x5 mm glass shelf of toughned glass with edges round off, supported on anodised aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. , corner stand: supplying and fixing offrosted glass toughened corner stand ( wall mounted ) chrome plated railings in bathroom of minimum size 12 inch x 12 inch including all fittings and fixtures etc. complete. , granite counters / partitions: providing and fixing granite stone of approved shade slab with table rubbed, edges rounded and polished, nosing ) for fixing in urinal partitions / granite counters including making all chasing of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size ) as per direction of engineer in charge and finished smooth , urinal: providing and fixing white urinal basin of make johnson ( model no p0519pw ) / hindware / jaguar of size 390 x 390 x 610 mm along with urinal concealed valve ( johnson t 0677c or equivalent ) , connecting hoses, clamps, spray nozzles etc. complete. , western water closet: providing and fixing white vitreous china pedestal type water closet ( western type ) water closet pan of dimensions 570 x 365 x 400mm make johnson ( model no. p0547pw ) / hindware / parryware or equivalent along with necessary trap, fittings, with 10 litre low level white p.v.c. flushing cistern, including flush pipe, seat covers, with manually controlled device ( handle lever ) , conforming to is :7231, with all fittings and fixtures, angle valve, hose complete, including cutting and making good the walls and floors wherever required :including dismantling of exisitng iwc / ewc, clearing sand cushion, p & s trap, connecting pipe linesand disposing the unserviceable material at the designated place of disposal including all labour tools etc complete , floor trap :supplying and fixing of heavy duty 4 dia 2 way / 4 way pvc multi floor traps without jali of reputed make i.e. finolex or equivalent , cockroach trap: supplying and fixing of heavy duty 4 ss 304 grade cockroach trap with necessary jali, cup, trap etc. complete , indian water closet: providing and fixing white vitreous orissa pedestal type water closet ( indian type w.c. pan model no. parryware dimensions 580x445x300 mm or equivalent ) with 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is :7231, with all fittings and fixtures, angle valve, hose complete, including cutting and making good the walls and floors wherever required :including dismantling of exisitng iwc / ewc, clearing sand cushion, p & s trap, connecting pipe linesand disposing the uncerviceable material at the designated place of disposal including all labour tools etc complete , towel rod: supply and fixing of towel rod in ss 304 of make johnson ( model no. t1350c ) or equivalent as per eic , bottle trap: supply and fixing of bottle traps of make johnson ( model no. t0060c ) or equivalent for wash bash basinas per direction of eic , angle valve: supply and fixing of angle valve of make johnson ( ange valve ( johnson model no. t3410c or equivalent of reputed make ) for geysers oras per direction of eic , upvc ball valve: supply and fixing of 3 / 4 upvc ball valve of make ashirvaad or equivalent reputed make , insect screens: supplying and fixing of insect screens with shutter type doors ( aluminium with ss mesh ) with all rippers, locks, handles hinges etc.with all materials and labours etc. complete such that there is nogaps between existing window / ventilator frame for insects / mosquitoes;for all heights etc., complete. , replacement of ventilator shutters: removing of existing ventilator shutters and refixing new ventilator shutters of country wood ( padak or kongu ) frame with 5.5 mm thick glass, with two coats of synthetic enamel paint over a coat of primer on the shutter frame, with necessary hinges, tower bolt, handles etc. complete. the new shutter fitted should properly sit on the existing frame without any gap. , replacement of damaged glass in windows / ventilators: renewing glass panes and refixing existing wooden fillets: float glass panes of nominal thickness 5.5 mm plain glass using putty / wooden beading / rubber beading for all heights , wooden frames: providing and fixing i class country wooden frame of doors shutter / frame, window shutter / frame, cupboards and air conditioners frame work with necessary fixtures and fastenings including necessary hold fasts, applying two coats of coal tar preservatives on the sides in contact with wall for frame including scantling, making necessary grooves, grouting, including making good all damaged portion done with all labour, material etc. complete. including removing the old damaged wooden / steel frame and door / window shutter and disposing the same etc., complete for all heights , door closer: providing and fixing is : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. , existing window / ventilator grills modification: removing of existing grills of windows / ventilators for modification / repairs of frames and refixing the same with necessary bolts / fixtures etc. complete. , dismantling of structural steel works: dismantling of structural steel works ( bolted / riveted / welded ) of all descriptions ( taking all necessary safety precautions ) for all heights & depths above & below plinth level including supply of all tools & tackles, consumables, necessary scaffolding etc. providing temporary bracings as required, cutting gusset plates, bolts, nuts, weldings etc, stacking of serviceable materials at designated location / cpcl storage yard / scrap yard within the refinery premises as per direction of engineer in charge. , fabricating and erection of structural steel works: supplying, transporting, storing, fabricating & erecting in position bolted and / or welded structural steel works like angles , channels, beams, plates, pipes, tubes etc.at all heights & levels and locations including all builtup sections / compound sections made out of rolled sections and / or plates / bent plates in existing / new structural pipe supports, frames, etc., cutting to required size, straightening / bending if required, edge preparation, cleaning, scrapping & welding of unsound joints in existing structural members, preheating, ( including sealing of box section with continuous welding ) finishing edges by grinding , fixing in line and level with temporary bracings, including providing staging, scaffoldings, & working platforms at all heights, and removal of same after erection, including preparing the surface for painting , surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease etc complete along with providing paint system as follows: ( a ) applying inorganic zinc silicate coat 50 micron dft ( b ) two coats of epoxy primer paint 50 micron dft each ( c ) two coats of anti rust epoxy top coat paint 75 micron dft each as per manufacturers specifications and as directed by engineer in charge. note: one coat of zinc silicate and one coat of epoxy primer shall be applied on structural steel surfaces after manual cleaning prior to erection as per specifications & as directed by engineer in charge. supply of all materials in contractors scope. , replacement of shutters: taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the engineer in charge. , water tank level indicator: supplying and installation of heavy duty water tank level guage with water level indication ( 3 levels low, middle and high ) and alarm system for over flow. the height of the tank shall be considered above 2 nd floor level for length of signal cables ) , brass float valve: supplying and installation of brass heavy duty float valve set of 2diameter ( 2 brass valve, brass rod set, pvc float ball ) of viking or equivalent reputed make for water tanks including all reducers fittings etc. complete , curtain rods: supplying and installation of cp curtain rods 20 mm diameter with 100 mm long cp brackets ( 2 nos. ) for each room windows. , curtains: supplying and installation of cotton stitched curtains in any shade and design with 99% blackout thick backing cloth, thermally insulated with cp eylet rings in the curtain for sliding over the curtain rod. the curtain shall be having velcrow for tying. , navopan: providing and fixing of 12mm thick navopan both side colour laminated sheets as per the manufactures specification, including cutting, fixing in position, to wooden door shutters removing the damaged old navopan sheet with all labours and materials etc., complete. for all heights. , cubboard locks: supplying and fixing of locks with 2 keys for cub boards of goodrej or equivalent make. , polymer modified repair mortars: repairing surface irregularities: damaged concrete, if any, with latex modified repair mortarof make fosroc / basf / sika including a coat of bonding agent at required places or defects in concrete surfaces. , bond coat: providing and applying approved epoxy resin ( prepared as per manufacturers recommendation ) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiseling, taking off the skin of concrete, application of epoxy resin system by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete. , water proofing of structure: providing injection type post construction water proofing to concrete structures such as roof slabs, sunken portions, intersection of chajja & masonry, liquid storage tanks, etc. by installing minimum 12 / 15mm dia pvc / aluminium / gi nozzles at suitable intervals and mechanically injecting single component hydrophobic water active flexible polyurethane of approved make at minimum pressure of 3 kg / sqcm as per manufacturers recommendations. the rate shall include all materials, labor and operations and finishing, dismantling & assembling of false ceiling / under deck insulation works if any, making temporary water pool over the leaky portion and removal after work, include the cost of providing fixing and cutting off nozzle projections grouting holes, etc. complete as per the instructions of engineer in charge. ( only consumed chemical in grouting work to be measured for payment ) , mosaic polishing: mosaic floor cleaning, grinding and polishing to obtain mirror finishing using suitable abarsions and chemicals and grinding / polishing machines for all floors, dado upto 2nd floor height , wood polish: staircase balustrade wood polishing providing & applying wood finish coats: surface preparation using paper 180 and then using and paper 320 and wipe clean, supply and application of one coat of sealer base coat andtwo coats of acid curing solvent based 2 pack of wood finish at an interval of about 24 hours. sand lightly with and paper 320 between the two coats. rate inclusive of filler if required in all heights. rate includes erection of scaffolding / movable safety harness like parapet anchor, all tools, materials and labor etc. , roof sheet dismantling: dismantling gi / asbestos / translucent sheets, ridges, gutters, curves, turbo ventilators, etc. in roofings and wall claddings, including supply of all tools & tackles, consumables, cutting ( by flame or saw ) of fixing hooks, transporting and stacking the serviceable materials, cleaning the site and disposal / handing over of the unserviceable material to scrap yard anywhere within the refinery premises, including all labor, tools all complete for all levels, as specified and directed. , roof sheet providing: providing and fixing color coated licensee galvalumeprofile sheetsof total coated thickness thickness ( not less than ) 0.5 mm of approved make as certified by biec international, inc. the sheet shall be fixed using self drilling / self tapping screwsof size ( 5.5x 55 mm ) with epdm seal / bolts of assorted sizes as directed by eic, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, all labor, tools supervision, height work / safety permits, safety precaution all complete for all levels, as specified and directed. ( size, shape and pitch of corrugation as approved by eic ) . nominal composition of the coating is 55% aluminum, 43.5% zinc and 1.5% silicon by a continuous hot dip process. corrosion inhibitive primer and a top coat should have been applied on either side of the sheet. for all roof areas including curved profile sheets for corners , ridge sheets: providing and fixing color coated licensee galvalume sheet ridges plain ( 500 600mm ) of total coated thickness thickness ( not less than ) 0.5 mm of approved make as certified by biec international, inc, using self drilling / self tapping screws, all labor, tools supervision, height work / safety permits, safety precaution all complete for all levels, as specified and directed. nominal composition of the coating is 55% aluminum, 43.5% zinc and 1.5% silicon by a continuous hot dip process. corrosion inhibitive primer and a top coat should have been applied on either side of the sheet. , providing, erection & dismnatling of scaffolding for all heights: job involves erection of scaffolding at the required locations using 1 1 / 2 inch dia steel tubular pipes with suitable clamping arrangement, providing steel gratings, access staircase system at required locations firmly tied on to the scaffolding pipes, removal of the steel gratings & scaffolding materials on completion of the job. the job shall be carried out as per cpcl scaffolding procedure. the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, all consumables and labour to complete the job in all respects, supply & transportation of steel scaffolding materials & steel gratings to the work site etc. complete as per directions and approval of engineer in charge. the payment will be made once irrespective of duration of scaffolding. ( to be used only for inspection of plumbing works / exterior wall cracks inspection only ) , anchor fastening: supplying, handling, transporting to site of work and fixing approved chemical anchor fasteners consisting of ms threaded rod of grade 5.8, galvanised with minimum thickness of 5 microns and chemical ( approved for use in cracked concrete ) , packed in flexible chemical foil or dual foil type, to be used with the help of dispenser, of 16 mm dia at specified positions on concrete floors, roofs, beams ( sides and bottom ) , walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing , necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed by engineer in charge. , supply of machineries: hiring of machineries on demand basis. the quoted rate is inclusive of charges towards mobilization if any, hire charges, consumables fuel / oils / lubricants, operator crews costs, supervision, overhead & profit, safety permits, safety precaution etc. complete. , for tractor with trolley , jcb , tractor dozer / ripper arrangements , front cabin mounted hydra minimum 14 t capacity , trimming of trees: trimming of trees and cutting of trees branches upto 30 cm girth touching the building / walls / car shed areas etc. with necessary tree cutting machine etc complete , cutting of trees: felling of trees including cutting of trunks and branches, removing the roots and disposal of unserviceable material outside the refinery premises with all leads and lifts upto girth < = 60 cm @ 1m above gl , lacqued etched glass: providing and fixing urinal / washbasin partitions of lacquered etching glass of thickness not less than 12mm thick along with necessary fittings design approved by eic , post contruction termite treatment: providing and injecting chemical emulsion for post constructional anti termite treatment using chemical imidacloprid 30.5% sc at 2.1ml per litre of water covering entire building internal as well as external wall. the quoted rate shall be inclusive of all tools, tackles, labours, chemical / material cost etc complete. , skilled & unskilled workmen: supply of skilled and unskilled various crafts men to carry out petty works not acessable for measurements / minor repair works, on day to day basis from 08:30 to 17:30. the rate shall include payroll costs, all allowance, fringe benefits overhead supervision and profits and hand tools including working onsundays and national holidays , skilled , unskilled , electrical works ( item no.900 to 1370 ) tube light fitting: the scope of work includes supply and fixing of led l.fixt elite pride plus 18 w 6500 k1, cool daylight ( cdl ) , decorative slim linear 4’ led batten fittings with bulb of havells catalogue or equivalent , including civil work ( if any ) required for installation, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. , socket outlet: the scope of work includes supply and fixing of 20 amps., 240 volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps, g series, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, including connections, testing and commissioning etc. as required, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. note:isi marked sockets of approved make shall be used. , 3 phase 6 way distribution board: the scope of work includes supply, erection, connecting, testing and commissioning of 3 phase 6 way distribution board concealed in wall / partition. the board shall be powder coated with below mentioned provisions and necessary accessories for db, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. note:isi marked components of approved make shall be used. , with incoming 63a four pole mcb, 63a 30ma elcb and out going 18 nos. of 6 / 10 amps mcbs , supplying and fixing of 16way, single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface / recess, complete with tinned copper busbar, neutral link, eachrth bar, din, bar, detachable gland plate, interconnections, including painting earthing etc.as required. , mcbs: the scope of work includes supplying and fixing of 5 amps. to 32 amps, 240 / 415 volts, 50hz, 10kaminiature circuit breaker ( suitable for motor, lighting and other inductive loads and conforming to is 8828: 1996, iec 60898: 2002 ) of following poles in the existing mcb db with required rails / fastenersfor fixing, including connections, testing and commissioning etc. as required, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. note: isi marked mcbs as per approved vendor list attached with the tender shall be used. , supply , upto 32a, single pole , upto 32a, double pole , installation , upto 32a, single pole , upto 32a, double pole , rccb: the scope of work includes supplying and fixing of upto 32 a, 30 ma, 2p rating, double pole, ( single phase neutral ) , 240 volts, residual current circuit breaker ( rccb ) , isi marked, having a sensitivity current indicated miliamperes in the existing mcb db with required rails / fastenersfor fixing, including connections, testing and commissioning etc. as required, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. note: isi marked rccb shall be used. , supply , installation , supply of pvc wires: the scope of work includes supply of following size of pvc insulated, copper conductor for laying in the existing surface / recessed, pvc / steel conduit / pvc casing and capping as required, as per the specifications of this tender and directionsof engineer in charge. note: only isi marked cables shall be used. , 1.5 sq.mm , 2.5 sq.mm , 4 sq.mm , supply of pvc conduits: the scope of work includes supply of 25 mm pvc conduit alongwith the accessories to be used for installation in surface / concealed as required, as per the specifications of this tender and directionsof engineer in charge. note: only isi marked conduits shall be used. , laying of pvc conduit: the scope of work includes fixing of up to 40mm of pvc conduit alongwith the accessories to be used for installation in surface / concealed as required, including cutting the wall and making good the same in case of recessed, as per the specifications of this tender and directionsof engineer in charge. , laying of pvc wires: the scope of work includes drawing / laying of following size of pvc insulated, copper conductor for laying in the existing surface / recessed, pvc / steel conduit / pvc casing and capping as required, as per the specifications of this tender and directionsof engineer in charge. , 1 x 1.5 sq.mm , 2 x 1.5 sq.mm , 3 x 1.5 sq.mm , 1 x 2.5 sq.mm , 2 x 2.5 sq.mm , 3 x 2.5 sq.mm , 2 x 4 sq.mm , supply and fixing of plastic / metal boxes of following sizes with all accessories including necesssary base frame plates / mounting plates, etc., suitable for fixing decorative switches of type roma or equivalent make in havells / siemens / anchor / l&t , 1 or 2 module box , 6 module box , 12 module box , supply, fixing and connection of modular type of anchor make ( roma ) or approved equivalent switch, socket bell push etc in havells / siemens / anchor / l&t, complete with labour and materials as per direction of the engineer in charge. , 10 a, 1way switch , 20a, 1 way switch. , 3 pins 5 / 6 amps socket with isi mark , 3 pins 10 / 20a, heavy duty uni socket outlet with isi mark , 3 pins 5 / 6 amps. isi marked polycarbonate unbreakable plug top , 3 pins 15 / 16 amps. isi marked polycarbonate unbreakable plug top , single module dimmer / fan regulator 450w , pvc battern / angle holder , supply ofm / s philips or equivalent makeled bulb 5 6 w for installation in lighting fittings / fixtures as per directions of eic , ceiling fan: the scope of work includes supply, installation, testing and commissioning of 1200mm sweep ceiling fan ofbajaj / crompton greaves / khaitan / usha / havells make of following sweep withceiling fan and regulator, including wiring the down rod of standard length ( upto 30 cm ) with 1.5 sqmm, pvc insulated, copper conductor, single core cable etc., as required, , as per the specifications of this tender and directions of engineer in charge. , dismantling of switch & sockets: the scope of work includes dismantling of all types of switches, sockets and plug points without damage and returning them to our stores or any other place or site within the premises as decided by the engineer in charge, all complete with labour and materials and any other accessories, as per the specifications of this tender and directions of the engineer in charge. , dismantling of electrical wiring: the scope of work includes dismantling of electrical wiring ( comprising of single or twin core pvc wires upto 6 sq mm and single earth wire upto 6 swg ) along with its connected accessories, as per the specifications of this tender and directions of engineer in charge. , dismantling of fans: the scope of work includes dismantling of all types & sizes of ceiling fans with down rod and regulator and exhaust fans of sweep 350 / 450 mm alongwith shutter, frame etc. without damage and returning them to our stores or any other place or site within the premises as decided by the engineer in charge. all complete with labour and materials including dismantling of supports of any type, down rods, condensers and any other accessories, as per the specifications of this tender and directions of the engineer in charge. , dismantling of electrical flp / wp fittings: the scope of work includes dismantling of surface / channel / wall / steel structures mounted wp / flp ( div 1 and div 2 ) type fittings such as lighting fixtures, push button stations / motor control stations, junction boxes, welding sockets, lighting panels convenience outlets / convenience outlets with built in transformer etc. of weight of the unit upto 2 kg. all complete without damage and returning them to cpcl stores or any other place or site within the premises, including dismantling of any supports, poles, frames or any other structures related to the fittings, as per the specifications of this tender and directions of engineer in charge....

Indian Rare Earths Limited - Tamil Nadu

28744744 dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 8m height and dumping the debris within a lead of 200m etc. complete as per the direction of engineerincharge. earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineerincharge. supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc.complete as per standard specifications and as directed by the engineerincharge. supplying, providing & laying rr masonry foundation in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete upto 2m below ground level and 3m above ground level, etc. complete as per standard specifications and as directed by the engineerincharge. supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls upto 5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, providing and laying solid block brick masonry in cm 1:6 using cement concrete solid blocks of minimum size 400*200*150mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, providing and fixing twisted reinforcement is 1786 hysd bars including fabrication, cutting, bending cold tying, including overlapping to the required length wherever necessary and placing the reinforcement in position as per the direction of engineerincharge including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard specifications and as per the direction of engineerincharge. supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, consolidation and curing, etc., including the cost of centering / shuttering work, complete complying with standard specifications and as directed by engineerincharge. supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 5m height with neat pointing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineerincharge. supply of paint and painting two coat with 1st quality emulsion paint of approved shade ( asian / berger nippon ) for internal & external surface of walls, ceiling over a coat of cement primer ( berger / asian / nippon ) upto 5 mtr height from ground level including thorough scrapping, cleaning, removal of dirt and all tools & tackles, scaffolding, etc. before primer coating applying one coat putty with neat polishing & finishing for internal wall and putty touchup works for external wall wherever required, etc. complete as directed by the engineerincharge. supplying, providing, cutting and fixing of b class gi ( galvanized iron ) pipe of size 1x2 ( horizontal member ) by imbedding in brick wall post done at item no. 5. the b class gi horizontal members shall require to be erected 3 rows at equal spacing with required clamping including painting with two coat with 1st quality enamel paint of approved shade ( berger / asian / nippon ) over a coat of enamel zincchromate / with 1st quality enamel paint of approved shade ( berger / asian / nippon ) over a coat of enamel zincchromate / zinc phosphate primer ( berger / asian / nippon ) , etc. complete as per the direction of engineerincharge. engagement of mason for miscellaneous work such as masonry repair works etc. complete as directed by the engineerincharge ( required materials will be issued by company on free of cost ) . engagement of labour ( mazdoor ) for miscellaneous work such as assisting the mason for repair works, etc. complete as directed by the engineerincharge. ( required materials will be issued by company on free of cost ) ....

Indian Rare Earths Limited - Tamil Nadu

28431376 dismantling and removal of r.r. masonry / brick masonry / plain cement concrete work, etc. upto 8m height and dumping the debris within a lead of 200m etc. complete as per the direction of engineerincharge. dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 200m, etc. complete as per the direction of engineerincharge. earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineerincharge. supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineerincharge. supplying, providing & laying rr masonry foundation in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete upto 1m below ground level and 1m above ground level, etc. complete as per standard specifications and as directed by the engineerincharge. supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls upto 10m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, providing and fixing twisted reinforcement is 1786 hysd bars including fabrication, cutting, bending cold tying, overlapping to the required length wherever necessary and placing the reinforcement in position as per the direction of engineerincharge including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard and as per the direction of engineerincharge. supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, consolidation and curing, etc., including the cost of centering / shuttering work, complete as directed by engineerincharge. supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc. for floors & walls upto 10m height with neat pointing and necessary grouting, including all scaffolding, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, plastering with cm 1:3 mix 12mm thick one coat floated hard & trowelled smooth for rcc slab, columns upto 8m height with neat pointing and necessary grouting, including all scaffolding, etc. complete complying with standard specifications and as directed by the engineerincharge. supply of paint and painting two coat with 1st quality emulsion paint of approved shade ( asian / berger / nippon ) for internal & external surface of walls, ceiling over a coat of cement primer ( berger / asian / nippon ) upto 10 mtr height from ground level including thorough scrapping, cleaning, removal of dirt and all tools & tackles, scaffolding, etc. before primer coating applying one coat putty with neat polishing & finishing for internal wall and putty touchup works for external wall wherever required, etc. complete as directed by the engineerincharge. supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade ( berger / asian / nippon ) matching to the existing all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer and putty wherever required including necessary scaffolding arrangements, etc. complete as directed by the engineerincharge. supplying, providing & fixing of 1st class malaysian vengai wood paneled double door of overall size 2x2.4 m consists of outer frames 200x150mm and shutters frames consists of 125x50mm all round and intermediate, middle, horizontal and 40mm thick planks etc, including godrej heavy type locking arrangements with handle set ( 230mm ) for main door and fixing 4 nos. ( 300mm ) brass heavy type butt hinges for each sides and 6 nos. ( 300mm ) brass tower bolt and 2 nos magnetic brass door stopper for each door including necessary carving works with two coat polishing ( varnishing ) with 1st quality paint of approved shade ( berger / asian / nippon ) complete with neat finishing, including all necessary clamping and fixing work, etc. as per the direction of engineerincharge. supplying, providing & fixing of 1st class malaysian vengai wood paneled door of overall size 1.2x2.1m consists of outer frames 125x75mm and shutters frames consists of 125x40mm all round and intermediate, middle, horizontal and 20mm thick planks etc, 125x40mm all round and intermediate, middle, horizontal and 20mm thick planks etc, including godrej 6 lever mortise lock with handle set for door and fixing 4 nos. ( 125mm ) heavy type brass butt hinges and 3 nos. ( 200mm ) brass tower bolt and 1 no. magnetic brass door stopper including painting two coat of enamel paint ( asian / berger / shalimar ) over a coat of wood primer etc. including fixing new frames & door with masonry works complete with neat finishing, etc. as per the direction of engineerincharge. supplying, plastering with cm 1:2 mix 20mm thick one coat floated hard & trowelled smooth etc for ornamental / sculpture works upto 10m height with neat finishing and necessary grouting including scaffolding work etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, providing and fixing reflective elevation glass of thickness 68mm including necessary fixing i.e. the frame and shutter sections should be cut to length and miter joined with corner bracket. mullion section should be joined with frame / mullion using nylon mullion cap. epd gasket should be used all around glass in shutter between frame and glazed shutter and both sides of fixed glass, etc. with necessary scaffolding work complete complying with standard specifications and as directed by the engineerincharge....

Indian Rare Earths Limited - Tamil Nadu

28288177 dismantling and removal of rcc foundation / column / slab / beam, etc. in all heights upto 8m from floor level including all necessary scaffolding and dumping the debris within a lead of 200m and returning the ms rod to store, etc. complete as per the direction of engineerincharge. earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the engineerincharge. supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineerincharge. supplying, providing & laying rr masonry foundation in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete upto 1m below ground level and 1m above ground level, etc .complete as per standard specifications and as directed by the engineerincharge. supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls upto 5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, providing and fixing twisted reinforcement is 1786 hysd bars including fabrication, cutting, bending cold tying, including overlapping to the required length whereever necessary and placing the reinforcement in position as per the direction of engineerincharge including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc. complete for all rcc works as per standard and as per the direction of engineerincharge. supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, consolidation and curing, etc., including the cost of centering / shuttering work, complete as directed by engineerincharge. supplying, plastering with cm 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 5m height with neat pointing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineerincharge. supply of paint and painting two coat with 1st quality emulsion paint of approved shade ( asian / berger nippon ) for internal & external surface of walls, ceiling over a coat of cement primer ( berger / asian / nippon ) upto 5 mtr height from ground level including thorough scrapping, cleaning, removal of dirt and all tools & tackles, scaffolding, etc. before primer coating applying one coat putty with neat polishing & finishing for internal wall and putty touchup works for external wall wherever required, etc. complete as directed by the engineerincharge. supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade ( berger / asian / nippon ) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer and putty wherever required including necessary scaffolding arrangements, etc. complete as directed by the engineerincharge. supplying, providing and laying with 10mm thick vitrified tiles of size 600mmx600mm johnson / kajaria / somania brand with cement mortar 1:2 and pointing including finishing the joint and pointing flush with the supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade berger / asian / nippon ) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer and putty wherever required including necessary scaffolding arrangements, etc. complete as directed by the engineerincharge. supplying, providing and laying with 10mm thick vitrified tiles of size 600mmx600mm johnson / kajaria / somania brand with cement mortar 1:2 and pointing including finishing the joint and pointing flush with the surface, etc. complete as directed by engineerincharge. supplying, providing and finishing the floor with johnson / somania / kajaria make antiskid ceramic tiles of approved quality and shade in cm 1:3 ? 15mm thick and pointing the tiles with matching colour cement, etc. complete as per the direction of the engineerincharge. supplying, providing, laying, dadoing the walls with johnson / somania / kajaria make ceramic wall tiles of approved quality and shade fixing with cm 1:2 ? 10mm thick, etc. complete as per the direction of the engineerincharge. supplying, providing and fixing rcc jally of size 0.60x0.45m.as per the direction of the engineerincharge. supplying, providing and fixing sintex make pvc door of size 750x2100mm including hinges, handle and locking arrangements, etc., after restricted and careful dismantling of the existing old wooden frame and door including all tools and tackles, etc., complete as directed by engineerincharge. supplying, providing and laying 15 / 20 / 25mm pvc / cpvc super thick finolex / astrol / ashirvad pipes including all specials such as bend, elbow, reducer, tee & solvent cement, etc. complete as per the direction engineerincharge. supplying, providing and laying 32mm / 50mm id pvc highcount / finolex / ashirvad pipes including all specials such as bend, elbow, reducer, tee & solvent cement, etc. complete as per the direction of engineerincharge. supplying, providing and laying 110mm dia id pvc high count / finolex / ashirvad pipes including all specials such as bend, elbow, reducer, tee & solvent cement, etc. complete as per the direction of engineerincharge. supplying, providing and fixing the cp sanitary fittings: bib tap / pillar tap / angle cock / tower rail, etc. as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: parryware ( utsav petite ) ceramic sanitary ware western closet with required trap and slimline flush tank ( standard, white ) including necessary fittings, etc. per the direction of engineer incharge. supplying, providing and fixing the cp & sanitary fittings: 20 / 25mm brass ball valve of heavy type....

Indian Rare Earths Limited - Tamil Nadu

28259326 dismantling and removal of existing weathering course ( surki ) , roof tiles, plastering surface, floor, brick wall, etc. with neat cleaning by manually / mechanical tools and removal of debris within a lead of 500m, etc. complete as per the direction of engineerincharge. supplying, providing and laying pcc 1:2:4 mix for roof terrace flooring / sunshade / inner side of parapet wall work using 6mm chips and below grade hard blue granite jelly with reinforcing welded ms plaster mesh 1x1 ) including providing 2 coat of polymer coating [ water proof coating ( sika / perma ) as per the desired ratio of manufactured product the mix shall be stirred thoroughly until no bubbles remain in the mix, any lumps found in mix shall be removed. apply first coat of polymer ( water proofing agent ) modified cementitious slurry by brush on wet cleaned surface. after drying, second coat shall be applied on the first coat etc. ] for said portion, before applying water proof coating the surface shall be cleaned and remove all dust, foreign matters loose materials or any other deposits of contamination by rubbing with wire brush, etc. and all form works, mixing, laying consolidation and curing & necessary scaffolding upto 5m height from ground level, etc. supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for superstructure walls upto 5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, plastering with cm 1:4 mix 15 / 12mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 8m height with neat pointing and necessary grouting, etc. complete complying with standard specifications and as directed by the engineerincharge. supplying, providing and laying with 10mm thick vitrified tiles of size 600mmx600mm johnson / kajaria / somania brand with cement mortar 1:2 and pointing including finishing the joint and pointing flush with the surface, etc. complete as directed by engineerincharge. supply of paint and painting one coat with 1st quality emulsion paint of approved shade ( asian / berger nippon ) for internal & external surface of walls, ceiling over a coat of cement primer ( berger / asian / nippon ) upto 5 mtr height from ground level including thorough scrapping, cleaning, removal of dirt and all tools & tackles, scaffolding, etc. before primer coating applying one coat putty with neat polishing & finishing for internal wall and putty touchup works for external wall wherever required, etc. complete as directed by the engineerincharge. supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade berger / asian / nippon ) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer and putty wherever required including necessary scaffolding arrangements, etc. complete as directed by the engineerincharge. supplying, providing and fixing of mild steel iron z ( iss 7452 / 1990 ) section windows and ventilators with glass panes including all necessary fittings, fabrication, nuts and bolts, holdfast, handles, stays, etc. for proper completion of work as per the direction of engineerincharge....

Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

28130817 improvements to the karur 110 kv substation by painting interior walls exterior walls and ceiling with emulsion paint and windows painting wimprovements to the karur 110 kv substation by painting interior walls exterior walls and ceiling with emulsion paint and windows painting with enamel paint etc at karur...

Ordance Factory Board - Tamil Nadu

28106062 supply and fixing of 8mm thick calcium boards to the sides and vertical sides of conduit pipes above the height of 2.00m supported with necessary framework and also providing with one coat of putty and two coats of emulsion paint to match with the existing colour to an area of 4620.00 sq.ft at ofilav. the rate with gst for complete whole job contract...

Reserve Bank Of India - Tamil Nadu

28050627 carefully dismantling and removing the existing wooden doors between the living room and the passage ( 01 number per flat, having approximate dimensions of 0.95 m x 2.05 m ) , toilet and bath room ( 02 nos per flat, having approximate dimensions of 0.85 m x 2.10 m ) , of the existing flats, along with frames, shutters, hardware / fittings / fixtures, shifting and stacking the same at location ( s ) shown by the banks engineer within the colony premises, disposing off and carting away the nonsalvageable materials out of the colony premises etc complete as directed by the banks engineer. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing wooden windows of the living room & bed rooms ( 03 nos, having approximate dimensions of 1.20 m x 1.20 m ) and kitchen ( 01 no, having approximate dimensions of 1.20 m x 1.00 m ) , of the existing flats, along with frames, shutters, grills / guard bars, hardware / fittings / fixtures, shifting and stacking the same at location ( s ) shown by the banks engineer within the colony premises, disposing off and carting away the nonsalvageable materials out of the colony premises etc complete as directed by the banks engineer. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below.pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing wooden ventilators on the sides of the passage between living room & kitchen ( 02 nos, having approximate dimensions of 1.20 m x 0.60 m ) , bath room and toilet ( 02 nos, having approximate dimensions of 0.60 m x 0.60 m ) , of the existing flats, along with frames, grills / guard bars, shutters / louvers, hardware / fittings / fixtures, shifting and stacking the same at location ( s ) shown by the banks engineer within the colony premises, disposing off and carting away the nonsalvageable materials out of the colony premises etc complete as directed by the banks engineer. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below.pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing wooden builtin cupboards in the living room and bedroom of the existing flats, along with door frames, shutters, shelves, internal wooden partitions, hardware / fittings / fixtures etc, shifting and stacking the salvageable materials at location ( s ) shown by the banks engineer, within the colony premises, disposingoff and carting away the nonsalvageable materials out of the colony premises etc complete, as directed by the banks engineer. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing single / doublebrick thick, walls along with the existing finishes like paint / plaster / natural / artificial tile / slab dado / skirting, embedded r.c.c bands / lintels, embedded reinforcements etc using approved methods, disposing off and carting away the debris from the colony premises etc, as directed by the banks engineer. the rate shall include suitably propping / supporting / protecting ( as directed by the banks engineer ) the adjacent / residual structure to prevent any damage to them. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing platform in the kitchen, having approximate dimensions 3.00 m x 0.75 x 0.85 m, along with supporting walls, r.c.c slabs along with the existing finishes such as paint / plaster / natural / artificial tile / slab topping / dado / skirting, embedded r.c.c bands, embedded reinforcements etc, and the loft slab, having approximate overall dimensions of 3.00 m x 0.75 m x 0.10 m, between existing living room & bed room of the flats, along with, the existing finishes such as paint / plaster, embedded reinforcements etc, using approved methods, disposing off and carting away debris generated, from the colony premises etc complete as directed by banks engineer. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing & constructing new kitchen counter / platform having approximate overall finished dimensions 3.00 m ( length ) x 0.67 m ( width ) x 0.80 m ( height ) using kadapa ( cuddapah ) and granite slabs pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and fixing in position by sandwiching between the kadapa ( cuddapah ) slab and granite slab of the kitchen platform toping to be fixed as per item no. 7 above, counter sunk stainless steel sink having over all dimensions of 610 x 460 mm and bowl size 560 x 410 x 215 mm of popular range nirali grace plain glossy finish or approved equivalent, with waste coupling, dome type strainer etc. the rate shall include providing and fixing approved quality and make heavy duty flexible p.v.c waste pipe. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing wooden door shutters from the fames and refixing the same after necessary alterations and modifications including alterations and modifications of the door frames pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully disengaging and removing the existing plumbing / sanitary fittings / fixtures / accessories, exposed or concealed c. i / g.i / p.v.c water / waste water pipe lines up to the external vertical stacks, c.p brass fittings, kitchen sinks, wash basins, flush tanks, water / waste water connections, traps, gratings etc, in the existing kitchen, bath room & toilet areas, shifting and stacking the salvageable items removed at place ( s ) shown by the banks engineer within the bank?s premises. rebate for taking away the salvageable items removed and stacked under this item shall be considered under item no. 44 below pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and constructing halfbrick thick brick masonry work, true to plumb and line for internal partition walls, in c.m 1:3 using approved quality locally available bricks including providing proper key to the adjoining wall / structure, raking the joints, curing, cleaning, disposing off and carting away the debris from the banks premises etc complete as directed by the bank`s engineer. the rate shall include placing 8 mm diameter tor steel bars ( 2 nos. ) in every 6th course of brick masonry and embedding them in 50 mm thick 1:2:4 cement concrete including necessary shuttering, curing etc as directed by bank`s engineer. reinforcement shall be measured and paid for separately under item no. 12 below pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, cutting, straightening, bending tying using 18 swg g.i binding wires and placing in position 02 numbers of 8 mm diameter tor steel reinforcement bars over every 6th course of brick masonry to be constructed as per item no. 11 above, as directed by the bank?s engineer. the rate shall include cost of binding wire and wastages. authorized laps shall be measured and considered while arriving at the quantities. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and fixing precast r.c.c lintels over the openings in half brick thick walls, comprising the following i. lintels having crosssectional dimensions of 115 mm x 200 mm, shall be precasted with c.c 1:1.5:3 made out of approved quality 20 mm and downsize graded granite metals, river sand and approved make portland cement, including necessary shuttering, curing scaffolding, disposing off and carting away the debris etc ii. the scope of work shall include providing, cutting to required lengths, straightening, bending, tying with 20 swg g.i wires and placing in position 2 numbers of 12 mm diameter tor steel reinforcement bars as main reinforcement at bottom, 2 numbers of 10 mm diameter tor steel reinforcement bars as top reinforcement and 6 mm diameter mild steel bars as stirrups ( all steel bars of approved make ) @ 200 mm c / c, as per standard practices and relevant is code provisions.pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, casting and fixing in position r.c.c slabs, having approximate overall dimension of 1.20 m x 0.75 m x 0.10 m, as loft slabs over the niche, to be created on the wall between the passage and bathroomcumtoilet, for accommodating washing machine, by providing, batching, mixing, laying, spreading, levelling and manually consolidating using hand rammers, p.c.c 1:1.5:3, using approved quality 20 mm and down size graded broken granite stone aggregates, approved quality river sand and portland cement of approved make. the scope of work shall include, providing, cutting, straightening, tying using 18 swg g.i wires and placing in position, 8 mm diameter tmt bars of approved make, provided in both directions @ 150 mm c / c, as reinforcement. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and repairing the damaged r.c.c members such as columns, roof / floor slabs, beams, lintels etc. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and rendering additional layers, of polymer modified cement mortar, prepared as per the specifications under item no. 15 above and applied, for an average thickness of 15 mm each. these additional layers of polymer modified cement mortar shall be applied over the base layer, after proper curing of the previous layer and application of sbr based cementitious bonding coat, using approved materials, over the previous layer, as directed by the bank?s engineer. washed broken stone chips of 12 mm and downsize shall be added to the mortar used for base layers to make 1: 1: 2 mix. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling, and removing the existing ceramic tile, kota / granite or any other natural stone slab flooring / skirting, including bed / back mortar and ips flooring below, by approved methods, so as to expose the masonry wall / r.c.c floor slab / column, without damaging the masonry / slab / column, thoroughly cleaning the surface using clean jet of water, wire brush or any other approved methods, disposing off and carting away the debris out of the colony premises etc complete as directed by banks engineer. dismantling of skirtings over the masonry walls, to be dismantled under item no. 5 & 6 above and flooring over the sunken portions in the kitchen, bathroom and toilet, to be dismantled under item no. 18 below, are included under the of the respective items and hence will not be measured under this item. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing ceramic tile / kota / kadapa / granite slab flooring along with, bed mortar & screed concrete below and filling in the sunken portions, to expose the r.c.c slab below and masonry / r.c.c walls on the sides of the sunken portions, shifting and stacking the salvageable materials removed at location ( s ) shown by the banks engineer within the colony premises. the scope of work shall also include, disposing off the debris and nonsalvageable items and carting them away from the banks premises etc complete as directed by the banks engineer. pl refer to the tender document for banks premises etc complete as directed by the banks engineer. pl refer to the tender document for detailed description quote rate per unit exclusive of gst carefully dismantling and removing the existing ceramic tile / marble mosaic wall dado along with back mortar or cement plaster of any thickness on the masonry walls / r.c.c walls / columns, in the existing kitchen, bathroom and toilet of the existing flats, using approved method to expose the masonry / r.c.c surfaces, disposing off and carting away the debris and nonsalvageable materials out of the banks premises etc complete as directed by the banks engineer. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and applying waterproof treatment over the floor ( including sunken portions ) of the bathroomcum toilet and walls around it up to a height of 600 mm above the ffl, for flats. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, batching, mixing, laying, spreading, levelling and manually consolidating using hand rammers, p.c.c 1:3:6 for an average consolidated thickness of 20 mm to 150 mm using approved quality 20 mm and downsize graded broken granite stone aggregates, approved quality river sand and portland cement of approved make, as screed layer in flooring, to restrict the thickness of bed mortar for flooring within 20 mm. the scope of work shall include necessary curing, disposing off and carting away the debris from the banks premises etc complete as directed by the banks engineer. pl refer to the tender document for detailed description quote rate per unit exclusive of gst preparing the surface of the masonry / r.c.c walls / columns, exposed as per item no. 17 & 19 above, by raking the loose mortar joints, watering and thorough cleaning using wire brush / broom, providing and applying, 20 mm thick cement plaster, in two coats in cm 1:4 prepared by providing and manual batching and mixing approved make portland cement and approved quality river sand, true to plumb, level and line, as backing for vitrified / ceramic tile skirting / wall dado to be fixed as per item no. 28 & 30 below. the surface of the wet plaster after finishing shall be made rough using wire brush / brooms to receive subsequent coat of plaster and vitrified / ceramic tile skirting / wall dado to be fixed as per item no. 28 & 30 below. pl refer to the tender document for detailed description quote rate per unit exclusive of gst all as under item no. 22 above, but for plaster in c.m 1:3 with a coat of neat cement paste applied @ 2.00 kgs / sqm and finished for repairing the damaged portions. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, cutting to the required sizes, threading, joining using solvent cement, teflon tape etc, fixing in a concealed manner, on walls / floor, testing and commissioning, 25 mm ( nominal bore ) , isi 15778 marked, sdr 11, class i, chlorinated p.v.c ( cpvc ) pipes of approved make ( prince, astral, finolex, supreme, ashirvad or approved equivalent make ) suitable for hot & cold water lines. the scope of work shall include making necessary chasings / grooves on the walls / floor, fastening using metal clamps / hooks, provided at spacing not exceeding 600 mm c / c, providing, filling and finishing the grooves to the original profile of the wall / floor with c.c 1:1.5:3 & c.m 1:3, after fixing of the pipes. pl refer to the tender document for detailed description quote rate per unit exclusive of gst all as under item no. 24, above but using 20 mm ( nominal bore ) pipes. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, cutting to the required sizes, joining using solvent cement and fixing, testing and commissioning, 50 mm ( nominal bore ) , 6 kg / sq. cm, isi135922013 marked, unplasticised poly vinyl chloride pvcu ) pipes of approved make ( supreme, finolex, truebore or approved equivalent make ) , quality as concealed wastewater lines on walls / floor. the scope of work shall include making necessary chasings / grooves on the walls / floor, fastening using metal clamps / hooks, provided at a spacing not exceeding 600 mm c / c, providing, filling and finishing the grooves to the original profile of the wall / floor with c.c 1:1.5:3 & c.m 1:3, after fixing of the pipes. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and fixing, heavy duty p.v.c floor trap of approved make, with multiple inlets and outlet, suitable to connect the same to 90 mm wastewater pipes and 20 mm ( minimum ) water seal, including required pipes, specials / fittings / fixtures / accessories etc of approved make, required to connect the trap to the to the wastewater / soil lines laid in the sunken portion and external vertical stalks of the wastewater lines. pl refer to the tender document for detailed description quote rate per unit exclusive of gst preparing the surface of the screed concrete layer / floor slab by thorough cleaning and priming with cement slurry to receive the new flooring, providing and laying flooring / border / inlays in the approved pattern using 600 mm x 600 mm or approved size polished vitrified tiles of approved make and shade over a bed of cement mortar prepared by hand mixing approved quality river sand and approved make portland cement in the ratio 1: 4, laid, spread and consolidated to get an average consolidated thickness of 20 mm. the tiles shall be set with a floating layer of grey cement slurry and joints shall be pointed with tile grouts of approved make and quality to match with the shade of the tile. pl refer to the tender document for detailed description quote rate per unit exclusive of gst suitably preparing the jambs / sills / soffits of the openings for doors and ventilators of bath roomcumtoilet suitably preparing the jambs / sills / soffits of the openings for doors and ventilators of bath roomcumtoilet and windows by carefully dismantling and removing the existing plaster, providing and rendering cement plaster in c.m 1:3 admixed with water proofing compounds, providing and fixing 1618 mm thick approved quality and shade granite slabs ( lengthwise in single piece without joints in the middle for each side ) , fixed with cement slurry or approved quality and make tile adhesives, over the plastered surfaces. these slabs shall be cut in to two pieces longitudinally and fixed in a stepped manner with 20 mm lap ( throughout the length and glued together with approved quality and make adhesives in the longitudinal direction as directed by the bank?s engineer, to prevent entry of rainwater through the joints. pl refer to the tender document for detailed description quote rate per unit exclusive of gst preparing the surface of the screed concrete layer, by thorough cleaning and priming with cement slurry admixed with approved quality and make waterproofing chemicals in the proportion / ratio, as instructed by the bank?s engineer and the manufacturer, to receive the new flooring, providing and laying flooring in the approved pattern, using 300 mm x 300 mm or any other approved size, rectified, glazed ceramic tiles of approved make and shade, over a bed of cement mortar prepared by hand mixing approved quality river sand and approved make portland cement in the ratio 1: 3, laid, spread and consolidated to get an average consolidated thickness of 20 mm. the tiles shall be set with a floating layer of grey cement slurry and joints shall be pointed with tile grouts of approved make and quality to match with the shade of the tile. pl refer to the tender document for detailed description quote rate per unit exclusive of gst preparing the surface of the masonry / r.c.c walls / columns, prepared by rendering base plaster as per item no. 22 above, by watering and thorough cleaning using wire brush, broom, providing and fixing wall dado from ffl to roof, in the bath roomcumtoilet, using 300 mm x 600mm size, rectified, glazed ceramic tiles of approved make, shade ( 2 different shades, with high lighters as per the approved pattern ) , finish and quality for wall dado, over a backing plaster of c.m 1:3, prepared using approved make portland cement and approved quality river sand, true to plumb, level and line, rendered to the required thickness over and above the back plaster as per item no. 22 above, and set with grey cement paste covering the entire rear surface of the tile and joints grouted with water proof tile grouts of approved make and quality admixed with suitable pigment to match the shade of the tile.pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and fixing false ceiling with 12.50 mm thick plain gypsum boards. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and fixing 75 mm x 75 mm decorative, fibre reinforced pop cornices having approved design / pattern at the junctions of walls and false ceiling. the scope of work shall include cutting the cornices to the required sizes, fixing them to the walls and ceilings using s.s screws of appropriate size, provided at a spacing not exceeding 600 mm c / c, pop paste etc. the joints shall be finished with joint paper tape and jointing compound of approved make and providing and applying plaster of paris putty for required thickness. the exposed surface of the cornices, fixed as above shall be prepared by sand papering, providing, applying and finishing a coat of approved make white cementbased putty, one coat of approved make special primer and two or more coats of approved make and shade luxury plastic emulsion paint etc. the junctions at corners shall be mitred. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing fabricating and fixing partly panelled and partly glazed, single leafed door shutters. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, making and fixing, approved make, upvc window system with threetracked frames and three sliding windows. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, making and fixing, approved make fixed window system using upvc frames and fixed tinted glass panels. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, making and fixing, approved make ventilator system having approximate overall dimensions of 0.75 m x 0.60 m, using upvc frames and fixed frosted glass panels. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, making, assembling and fixing in position, modular, floor / wall mounted, floor to false ceiling height, ward robes, having approximate overall dimensions 1.20 m x 0.60 m x 2.70 m, with shelves and sidehung, swing type, postformed, doubleshutters. pl refer to the tender document for detailed sidehung, swing type, postformed, doubleshutters. pl refer to the tender document for detailed description quote rate per unit exclusive of gst the l.s amount quoted by the bidders for this lot shall be the total of individual items, specified in under item no. 39 ( i to xxviii ) of the scanned copy of the schedule of quantities uploaded along with the other tender documents. while settling the bills, the total amount for this item shall be arrived at by calculating the total amount, using the quantities of individual items from 39 ( i to xxviii ) , executed and the rates filled in and uploaded by the bidders in the schedule of quantities downloaded from the tender documents.pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, cutting to the required sizes, fabricating and fixing, fixed aluminium security grill panels, for the windows / balconies, using powder coated extruded aluminium rectangular tube sections and grills. pl refer to the tender document for detailed description quote rate per unit exclusive of gst preparing the surface of the walls and ceilings of roof slabs, soffits / vertical sides of beams etc by thorough scrapping / mechanical buffing / sand papering & dusting to remove the loose layers / flakes of paint finishes, providing and applying required thickness of white cement based putty to fill up, level and smoothen the surface, providing and applying a coat of approved special primer, two or more coats of luxury plastic emulsion paint, of approved make, shade and quality as per manufacturers specifications, standard specifications of the bank and as directed by the banks engineer. the rate shall include carefully opening up the cracks developed on the plaster in ?v? shape and filling it with approved quality and make crack filler materials compatible with existing surface to be painted. pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing, cutting to the required sizes and fixing, 28 mm diameter, 2 mm thick, decorative aluminium curtain rods, of approved quality, powder coated to the approved shade, as directed by the bank?s engineer. the rate shall include materials, labour, transport, handling charges, wastages etc. ( basic price rs. 150 / per rm, excluding taxes, transport, handling such as loading and unloading charges etc, required for delivery at site. the bidders shall consider the same while quoting their rates. the bank shall not entertain any separate claim towards these elements ) . pl refer to the tender document for detailed description quote rate per unit exclusive of gst providing and fixing, decorative, wooden / metallic supporting brackets and end cups, suitable for the curtain rods as per item no. 80 above, carved / moulded, to the approved design / pattern, and polished / powder coated to the approved shade, as directed by the bank?s engineer. the rate shall include materials, labour, transport, handling charges, wastages etc. ( basic price rs. 400 / per set of a pair of supporting brackets and another pair of end cups ) . pl refer to the tender document for detailed description quote rate per unit exclusive of gst scrap value for taking away the reusable / salvageable items removed and stacked under any of the items from 1 to 43 above, which are not required to be reused in the work under any of the items above. pl refer to the tender document for detailed description quote rate per unit inclusive of gst. applicable tcs will be calculated by the system....

Indian Rare Earths Limited - Tamil Nadu

27748693 supplying, providing and fixing twisted reinforcement is 1786 hysd bars including cutting, bending cold tying, placing in position, etc. complete for all rcc works as per standard and as per the direction of engineerincharge. supplying, providing and laying cement concrete 1:1.5:3 for rcc works using 20mm and below grade hard blue granite jelly with specified reinforcement and all mixing, laying, consolidation and curing, etc., including the cost of centering / shuttering work , etc. complete as directed by engineerincharge. supplying, plastering with cm 1:4 mix 12mm thick one coat floated hard & trowelled smooth for floors & walls upto 10m height complete complying with standard specifications including necessary scaffolding, etc. as directed by the engineerincharge providing and fixing decorative ceramic wall tiles of johnson / kajaria / somany make 600x300mm size with cm 1:2 ? 10mm thick, including finishing the joint / pointing flush with matching color cement / joint filler of the surface etc complete upto 2.5m height from floor level as per the direction of engineerincharge. supplying and fixing of ceramic mat finish floor tiles ?johnson / kajaria / somany make? of size 300x300mm to match with the wall tiles with cm 1:2 ?10mm thick over the existing plastered surface including finishing the joint / pointing flush with matching color cement / joint filler of the surface etc. complete as per the direction of the engineerincharge. supplying, providing and laying with 10mm thick vitrified tiles of size 600mmx600mm johnson / kajaria / somany brand with cement mortar 1:2 and pointing with matching color cement / joint filler of the surface, etc. complete as directed by engineerincharge. providing and fixing 1820mm thick jet black granite slab for wash basin area including grinding finishing the ends with half round and making opening in the middle of the slab to suit the wash basin and closing the joints with matching colour cement and polishing the slab to smooth finish, etc, complete as directed by the engineerincharge. supply of paint and painting two coat with emulsion paint of approved shade ( asian / berger / nippon ) for internal & external surface of walls, ceiling over a coat of cement primer ( berger / asian / nippon ) upto 15mtr height from ground level including thorough scrapping, cleaning, removal of dirt and all tools & tackles, scaffolding, etc. before primer coating applying one coat putty with neat polishing & finishing for internal wall and putty touchup works for external wall where ever required, etc. complete as directed by the engineerincharge. supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade ( berger / asian / nippon ) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer and putty where ever required including necessary scaffolding arrangements, etc. complete as directed by the engineerincharge. supplying, providing and laying 20 / 25mm cpvc astrol / ashirvad pipes including all specials cpvc / brass such as bend, elbow, reducer, tee, solvent cement, mta & fta etc. complete as per the direction of engineerincharge. supplying, providing and laying 20 / 25 / 32mm id pvc finolex / ashirvad / astral pipes including specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction engineerincharge. supplying, providing and laying 40 / 50mm dia id pvc finolex / ashirwad / astral pipes including specials such as bend, elbow, reducer, tee, solvent cement etc. complete as per the direction of engineerincharge. supplying, providing and laying 110mm dia id pvc finolex / ashirwad / astral pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction engineerincharge. supplying, providing and fixing cp & sanitary fittings: g4887a1 / edge ( s / l ultra hf parryware concealed diverter body ) , g3385a1 / a gate pro ( s / l ) ultra hf parryware concealed d.u. tr & t4628a1 ( claret parryware bath spout w / o diverter ) as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: t9809a1 ( abs parryware overhead shower with arm as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: t9982a1 multi flow ( 80mm ) hand shower with hose & clutch as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: white 555*450*205mm cascade supplying, providing and fixing the cp & sanitary fittings: white 555*450*205mm cascade nxt below counter basin ( parrywarec0407 1c ) including alpha waste coupling with water tec nylon connection tube, bottle traps ( heavy 9 t3202a1 ) , etc. as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: parryware pillar cock g1468a1 coral ( h / t ) swan neck for washbasin as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: duke ( s305 ) [ european closet ] white parryware single piece suite 615x370x700mm including seat cover and fittings ( c8916 46 ) as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: t9961a1 crust parryware health faucet with hose & hook as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: t6401a1 towel rail 600mm as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: standard parryware towel rack ( t6008a1 ) as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: t6005a1 paper holder parryware as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: stainless steel plain floor drain as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: t9926a1 star parryware angle cock as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: g0205a1 long spout bib cock parryware as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: flat back white parryware urinal ( c0501 1c ) with spreader and waste pipe including suitable azhirwad / supreme / high count make pvc gully trap, urinal bracket, urinal cock, etc. as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: cascade classic white parryware wall hung basin ( c0476 ic ) with f / th parryware waste coupling, white water tec waste pipe adjustable, etc. with necessary accessories as per the direction of engineerincharge. supplying, providing and fixing the cp & sanitary fittings: parryware white ceramics sanitary ware indian toilet / orissa pan c0111 ( 500x405x255mm ) with required trap and parryware white slimline flush tank e8090, etc. as per the direction of engineer incharge. supplying, providing and fixing the mirror seven horses frameless wall mounted rounded corner 5mm rectangularbevelled bathroom mirror of size 18x24 inch etc. as per the direction of engineerincharge. supplying, providing and fixing sintex make pvc door of size 750x2100mm including hinges, handle and locking arrangements, etc., after restricted and careful dismantling of the existing old wooden frame and door including all tools and tackles with masonry repair work, etc., complete as directed by engineerincharge. supplying, providing, and fixing of stainless steel handrails ( height 0.85m ) for staircase near wet riser using 50mm dia 304l grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304l grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. the supports will be grouted into the wall and provided with 93mm thick stainless steel circular base plate of 304 grade. the rate shall included for grouting into concrete / adhesive bonding agent with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete as per the direction of engineerincharge. supplying, providing and fixing partly glazed and partly heavy type aluminium partition / door indal / jindal ) of size 1000x 2100mm consisting of 47.60x 44.50x 1.50mm at vertical and top horizontal frame and bottom 100x44.50 and 5mm thick plain glass at top and 1.8mm aluminium alloy sheet at bottom including rubber beading, door divider, aluminium clips, brass pivot, hinges, door lock and door closer dyna / everite make, etc. complete as per the direction of the engineerincharge. supplying, providing and fixing marble slab ( opal white ) for urinal portion partition of size 900x1750 20mm both sides polished approved quality marble slab, etc. complete as per direction of engineer incharge. supplying and fixing godrej mortice lock 4 lever for existing door including removal of existing locking arrangements without damaging the existing door including necessary all accessories etc. locking arrangements without damaging the existing door including necessary all accessories etc. complete as per direction of engineer incharge. supplying and fixing godrej c071 2 speed hydraulic door closer for existing door including removal of existing door closer without damaging the existing door including necessary all accessories etc. complete as per direction of engineer incharge. supplying and fixing 4 inch / 5 inch heavy type brass hinges with brass screw for existing door / window including removal of existing hinges without damaging the existing door / window including necessary all accessories etc. complete as per direction of engineer incharge. supplying and fixing of brass door stopper for door including removal of existing door stopper without damaging the existing door including necessary all accessories etc. complete as per direction of engineer incharge. supplying and fixing of brass heavy gate hook / window hook including removal of existing window hooks without damaging the existing window including necessary all accessories etc. complete as per direction of engineer incharge. providing and fixing bwp cupboard and teak wood shutter with frame of over all size of 3.20x2.50 in position 600mm deep wooden cupboards / wardrobes of required size made of 19mm thick bwp board of approved make on top, bottom, sides, partitions & shelves consist of 3 horizontal rows and 3 vertical column, etc. 12 mm thick bwp ply in drawer unit of cupboard / wardrobe. cupboard shall be finished in two coat of synthetic enamel paint of approved make ( asian / berger / nippon ) over a coat of wood primer with applying putty and neat polishing, etc. as per sl.no.43 of scope of work engagement of mason for miscellaneous works such as masonry repair works, etc. complete as per the direction of engineerincharge. ( required materials will be supplied departmentally on free of cost ) . engagement of labour ( mazdoor ) for miscellaneous works complete as per the direction of engineerincharge. ( required materials will be supplied departmentally on free of cost ) . dismantling and removal of existing glazed wall tiles, floor tilesmosaic, granite slab and bathtub, existing plastering surface, old all concealed gi pipe lines by manually / by using mechanical tools and removal of debris within a lead of 500m, etc. complete as per the direction of engineerincharge. supplying, providing and laying pcc 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the engineerincharge. supplying, providing and laying brick masonry in cm 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation / kerb wall / wall upto 15m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the engineerincharge....

Military Engineer Services - Tamil Nadu

27646357 provison of external emulsion paint in camouflage pattern for wks services towards infrastrure development at air force station thanjavur phase ii at air force station thanjavur provison of external emulsion paint in camouflage pattern for wks services towards infrastrure development at air force station thanjavur phase ii at air force station thanjavur...

Ordance Factory Board - Tamil Nadu

27365281 tender for covering the exposed conduit pipes at ofilav office. supply and fixing of 8mm thick calcium boards to the sides and vertical sides of conduit pipes above the height of 2.00m supported with necessary framework and also providing with one coat of putty and two coats of emulsion paint to match with the existing colour to an area of 4620.00 sq.ft with gst etc., complete whole job contract....

Southern Railway - Tamil Nadu

27196836 supply of exterior emulsionexterior emulsion paint in 20 ltrs container, colour white, brand asianpaints ace (or) nerolac (or) berger....

Military Engineer Services - Tamil Nadu

26806034 provision of external emulsion paint in camouflage pattern for construction of deficient single living accn for sncos technical area at air force station thanjavur...

Military Engineer Services - Tamil Nadu

26699058 periodical services to certain buildings at airforce station thanjavur . , material and labour for preparing plastered or unplasterd old decorated wall surfaces including cornices , pillars etc and applying one coat of white wash on wall complete all as specified and as directed . , material and labour for preparing plastered or unplasterd old decorated ceiling surfaces and applying one coat of white wash on ceiling complete all as specified and as directed . , material and labour for preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion on walls complete all as specified and as directed . , material and labour for preparation of old decorated surfaces of walls and applying one coat of cement based paint on wall ( external borders is required dark blue or existing colour ) all as specified and as directed . note: painting to bldgs nos also including in this item . , material and labour for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed . , material and labour for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed . , taking down cement plaster of any description , raking out joints , hacking for keys and washing down with water etc complete all as specified and directed . , material and labour for rendering 15mm thick in cm 1:4 on fair faces of brick or concrete work making surfaces even and smooth without using extra cement and applying two coats of white wash after preparing newly plastered surfaces complete all as specified and directed . , material and labour for preparing new plastered surface of walls and applying two coats of white wash all as specified and as directed . , material and labour for preparation of old painted ( brick , stone , concrete , asbestos cement or plaster ) surfaces of any description applying one coat of acrylic exterior emulsion paint on walls all as specified and directed . , material and labour for preparing plastered or unplasterd old decorated wall surfaces including cornices , pillars etc and applying one coat of colour wash on wall complete all as specified and as directed ....

Nuclear Power Corporation Of India Limited - Tamil Nadu

26042893 bids are invited for epoxy based zinc phosphate primer(two pack)epoxy based zinc phosphate primer(two pack) , enamel, synthetic, exterior: (a) under coating (b) finishing paint , plastic emulsion paint total quantity : 465...

Southern Railway - Tamil Nadu

25981730 supply of , floor guard water based acrylic emulsion paint for protection of concrete and cement surfaces in either 04 litre container or 20 litres container, colour golden yellow (asian paints shade no:3300), make asian paints apex or berger or nerolac...

Southern Railway - Tamil Nadu

25980818 supply of , floor guard water based acrylic emulsion paint for protection of concrete and cement surfaces in either 04 litre or 20 litres container, colour cilantro (asian paints shade no:7581), make asian paints apex or berger or nerolac...

Central Public Works Department - Tamil Nadu

25106201 ar and mo to gpoa rajaji bhavan at besant nagar chennai 90 during 2020 21. sh finishing kerb stones with emulsion paint and making arrangement for independence day celebrations on 15th august 2020...

Indian Rare Earths Limited - Tamil Nadu

25087351 1 supply of paints and painting one coat with exterior emulsion paint as per sl.no.1 of scope of work 2 supply of paints and painting one coat with interior emulsion paint as per sl.no.2 of scope of work 3 supply of paints and painting one coat with 1st quality enamel / touch wood paint of as per sl.no.3 of scope of work 4 engagement of mason for miscellaneous works as per sl.no.4 of scope of work 5 engagement of labour mazdoor for miscellaneous works as per sl.no.5 of scope of work...

Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

25084854 vgtps civil improvement work providing aluminium partition to aee operation office in switch yard control room and aee mrt office in main control room and other allied works vgtps civil improvement work providing aluminium partition to aee operation office in switch yard control room and aee mrt office in main control room and other allied works at vgtps ramanathapuram . , civil improvement work providing aluminium partition to aee/operation office in switch yard control room and aee/mrt office in main control room and other allied works , supply and fixing of aluminium partitions and doors with suitable aluminium sections and panels covered with particle board including cost of necessary aluminium materials and fittings , cost of all labour , lead , lift etc . , complete as instructed by the engineer at site . , brick work in c m 1:5 using chamber burnt bricks ii class of size 9 x 4 3/8x2 3/4 including cost of all materials , labour , lead , lift , curing etc . , complete as instructed by the engineer at site . , plastering with cement mortar 1:3 , 12mm thick including cost of all materials , labour , lead , lift and curing etc . , complete . , colour washing two coats with ready mixed plastic emulsion paint of approved colour and quality for the interior & exterior walls including thorough cleaning , necessary putties wherever required , cost of all materials , labour , lead , lift etc . , completeas instructed by the engineer at site . , supply and fixing of cuddappa slab of suitable thickness in position for the shelf including cost of all materials , labour , lead , lift , etc . , complete as instructed by the engineer at site . ...

Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

24989490 improvements to the karur 110 kv substation by painting interior walls, exterior walls and ceiling with emulsion paintimprovements to the karur 110 kv substation by painting interior walls, exterior walls and ceiling with emulsion paint and windows painting with enamel paint etc., at karur....