earthwire Tenders in Tamil Nadu

1
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

40713648 earth work excavation, stub setting, concreting, supply and erection of gi tower parts, supply of hardware fittings, insulators, acsr zebra conductor, gi earthwire, labour charges for stringing of 6 nos. zebra conductor and 1 no. of gi earth wire, testing and commissioning of 230 kv dc line on dc towers from the existing thiruvalam 400 / 230 kv ss to existing thiruvalam 230 / 110 kv ss [ link iii ] in thiruvalam operation circle...

Due Date : December 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
2
Town Panchayats - Tamil Nadu

40662328 tender for maintenance of community hall in vadugapatti town panchayat, erode district.; 1 weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime ( no sand to be used ) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the rcc roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.61 v vi, ( via ) 3 2 finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in cement mortar 1:3 ( one cement add three sand ) 12 mm thick mixed with water proofing compound conforming to iss at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as per standard specification and as directed by the deparmental officers 44 h v, vi, ( s5a ) vii , 3 3 paving the floor with pre polished concrete anti skid tiles ( required shape and design ) of 20mm thick of approved quality and colour laid in cement mortar 1:3 ( one cement and three sand ) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. ( the make and brand of the tiles should be got approved by executive engineer before use on works ) 39 a 4 supplying and painting the new plastered walls with two coats of exterior emulsion paint ( weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per ( isi std ) ( it mustprovide excellent resistance against the growth of algae and fungi on the walls. and it must offer excellent protection against alkali and uv degradation and the durability period should be 5 years. 61 v, vi ( s4 ) 3 5 providing upvc ( un plasticized polyvinyl chloride ) door: providing and fixing casement doors fabricatedfrom un plasticized polyvinyl chloride ( upvc ) sections.profiles: the profiles should be three chamber system which provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of2.4mm. the window unit should be designed with allcorner joints mitred and fusion welded. windowsshould be steel reinforced with 25 x 24 x 25mm steelreinforcement with a thickness of 1mm to havedimensional stability. the sash should be of 60 x102mm. the mullion should be of 60 x 74mm. theprofiles should have co extruded seals.hardware: all the hardware like friction stays, handlesshould be screwed with self tapping screws. thehandles, locks should be designed so that they cannotbe released from outside.glazing: the window system should beglazed with5mm plain float glass / 6mm bison laminstallation: the profiles should be cut to length andwelded 45 degrees. the window should bedesignedsuch that the water drainage does not pass throughthe reinforcement chamber. the window systemshould be fixed directly to the plastered brick wallusing self expanding nylon plug and driving mselectroplated screws into plug. pwd sor page no : 65 sl. no : 268 6 supplying and fixing upvc ( un plasticized polyvinyl chloride ) windows of casement type ( open ) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with gi / 1mm 25gsm and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. the epdm rubber ( black colour ) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. the corners and joints should be welded and cleaned. radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. the connecting mechanism between sash and outer frame that enables opening of the window. the window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. the window should be got approved from the executive engineer before use on work page no : 65, sl no: 265 7 supply and fixing of m.s grills for windows, with one coat of red oxideprimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc, complete as per standard specification. including phosphating as per isi with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and steel doorcomplete as directed by the departmental officer. 8 supplying and fixing upvc ( un plasticized polyvinyl chloride ) louvered ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with gi / 1mm 125gsm and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. the epdm rubber ( blackcolour ) covered with all over the edges of frame and shutter.the corners and joints should be welded and cleaned.radiations pin headed glass 4mm thick should be provided inthe louvers. the window should be fixed to the wall with100% packing with screws and silicon packing all round theframes. the ventilator should be got approved from theexecutive engineer before use on work pwd sorpage no : 66 9 painting the new iron works such as steel doors, windows, ventilators windows bars, balustrades etc, in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand ( to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with standard specification. ( the make, quality and colour of paint should be got approved bythe engineer in charge before use on works ) ( tnss no or nbc no 61 v vi ( 54 ) 3 ) 10 supplyingandfixingin position best approvedof bis quality 110mm p.v.c rainwaterdownfallpipe having a pressure of 4kg / sq.cm including cost of necessary pvc shoe, pvc bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the rcc roof slab including finishing neatly etc, complete. the rate shall be inclusive of cast of removable cast iron grating. the pvc pipe shall be fixed in wall with special type of uclamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc, completecomplyingwithstandardspecifications. 11 dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in cement mortar 1:2 ( one cement and two sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.. 39 a 12 manufacturing, supplying and fixing of stainless steel hand rails for staircase near wet riser using 50mm dia 304l grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304l grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. the supports will be grouted into the wall and provided with 93.00mm thick stainless steel circular base plate of 304 grade. the rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete page no : 62 m 0652 13 supplying and fixing in position white / colour glazed european water closet of best quality and approved make with 100 mm p or s trap connecting with ci pipe of 100mm dia / pvc pipe of 110mm dia, double flapped rigid pvc black seat and seat cover with cp brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity pvc / 12.5 litres capacity porcelin low level flushing tank with a pair of ci brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white pvc flush hand using indian adopter joint including all internal fittings uch as 15mm brass connections, 15mm gm wheel valve, 15mm brass nipple ( 2 nos. ) , 15mm nylon connection, tw plugs, screws and also giving necessary connection to the pvc pipe including cost of 600mm length of 110mm dia pvc pipe and painting the ci brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re doing the dismantled masonry to original condition etc. complete complying with standard specifications. ( the ewc and flushing tank wiht all accessories should be got approved by the executive enginer before use on works ) 14 supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm ( with pedestal / without pedestal ) with a pair of cast iron brackets, including cost 15mm dia brass cp pillar tap, 32mm dia b class gi waste pipe with rubber plug and chain, 15mm dia gm wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia cp brass waste coupling including fixing of wash basin using ci brackets on to the wall in position with tw plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. ( the wash hand basin and specials should be got approved by the executive engineer before use on works ) . 15 polishing the teak wood door with two coats of best french ( lac ) polish with approved quality and brand over a coat of bees waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. ( the make, quality and colour of french polish, bees vax should be got approved by the executive engineer before use on works. ) 16 wiringwith2 x 1.5 sq.mm ( 22 / 0.3 ) pvcinsulatedsc unsheathed cu. conductor of 1100v grade in cuitable pvc rigidpipe concealed in wall and ceilingwithpvcaccessoires in flushwith wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t. switch and making good of the concealed portion with suitable colour for pvc concealedlightpoint / fan point ( for electronics regulator ) ( sd no: 25 ) 17 wiringwith2 x 1.5 sq.mm ( 22 / 0.3 ) pvcinsulated sc unsheathed cu. conductor of 1100v grade in suitable pvc rigidpipe concealed in wall and ceilingwithpvcaccessoires in flush with wall 150mm x 100mm x 113mm tw switch box with 3mm thick hylum sheet cover for 5a 3 pin non inter locking cs plug with continuous earth wire connection of 14swg tc wire and making good of the concealed portion with suitable colour for concealed pvc plug point ( sd no: 38 ) 18 wiring with 2 x 4 sqmm ( 56 / 0.3mm ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable heavy gauge ms conduit pipe on wall and ceiling with ms accessories inflush with wall with 150mm x100mm x75mm ms switch box concealed type with 3mm thick hylum sheet cover for 15a 3pin flush type non inter locking cs plug with continuous earthwire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed power plug point.etc, complete as per standard specifications. sd 40 19 supplying and fixing of 3 phases 4 wire 4 way icdb of 32 amps per way with 100 amps tpn mc switch with suitable trucking box. ms cable entry boxes and internal connection on suitable angle iron frame work withearth connection [ sd 178 ] 20 supplying and fixing of horizontal type 4 way triple pole natural mcb distribution board in sheet steel enclosure with 40 amps 4 pole mcb isolator as incoming and 12 nos.6a to 32 a mcb as outgoing in flush with wall and making good of the concealed portion with earth connection. [ sd 179 ] 21 earthing as per pwd standard with an earth electrode of 2 m class ‘b’ gi pipe of diameter not less than 32 mm complete with necessary masonry work. [ sd 234 ] 22 wiring with 2 x 4 sq.mm. ( 56 / 0.3mm ) pvc insulated sc unsheathed copper cable conductor cable of 1100v grade in suitable heavy gauge ms conduit pipe on wall and ceiling with ms accessories with 150mm x 100mm x 75mm ms switch box for 15a 3 pin non interlocking cs plug with painting of suitable colour with continuous earth wire connection by 14 swg tc wire for open power plug point [ sd 13 ] 23 supplying and run of 2 of no. 8 swg gi wire for guarding with cradle withno 8 swg gi wire at an equal interval of 1.5m [ sd 75 ] 24 supplying and laying of 3½ x 50 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ sd 206 ] 25 supplying of 4 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ sd 202 ] 26 supply andrun of 2x 4 sqmm ( 56 / 0.3 ) pvc insulated sc unsheathed cu. conductor of 1100v grade in 25mm dia gi pipe ( class b ) suitably bent at both ends with necessary angle iron upright and end supports for mains on 7 / 20 gi bearer wire for service connection mains ( sd. no 70 ) 27 supply andfixing of 32 amps dp switch with metal glad of 500v with fuse and nuetral ( side handle ) on suitable tw box pwd earthing ( sd. no 143 ) 28 supply and fixng of tneb moter board suitable for 3 phases 63a service connection made up of suitable angle iron frame work of size 2 feet x 1 1 / 2 feet using angle iron of size 1 1 / 2 x 1 1 / 2 x 1 / 4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1 / 2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 nos 63a fuse units ( 500v ) 1 no. neutral link, copper earth flat of size 1 x 1 / 4 with inter connection of eb meter to fuse units by 7 / 16 pvc insulated copper wire with earth connection complete ( sd no :129 ) 29 supplying and fixing of single box type 2 x 20 w led light fitting complete with electronic choke and teakwood round blocks on wall or ceiling with fluorescent tube with pvc unsheathed copper leads from terminals to the fitting. [ twad sor electrical page no ; 193 sl. no : 15b ] 30 supplying and fixing of450 mm ( 18” ) sweep ( light duty ) ac exhaust fan complete without provision of hole in the wall [ sd 118 ] 31 supplying and fixing of 1200mm ( 48” ) sweep ac ceiling fan complete with stepped electronic 300 w regulator, with 1 m down rod with fan clamp with side plates and cross arm of size 450 mm ( 18” ) [ sd 106 ] 32 supplying and fixing of wt bulk head fitting guard ( philips / bajaj / crompton / k.lite ) suitable for incandescent lamp with 60 w bulb [ sd 84 ] 33 supply and delivery offollowing pvc pipes and specials from borewell to hdpe tanklaying below ground level and above ground level and hdpe tank to toilet . 32mm pvc 10kg / cm2 34 32mm pvc.elbow 35 32mm pvc. bend 36 32mm pvc. tee 37 32mm pvc. end cap 38 20mm pvc 10kg / cm2 39 20mm pvc. bend 40 32mmx20mm pvc.reducertee 41 20mm pvc. tee 42 32mm g.m. gate valve 43 supplying and fixing in position 15mm dia brass cp screw down tap / pillar tap ( heavy duty ) of approved make conforming to bis specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. ( taps should be got approved by the executive engineer before use on the works ) 44 supplying and fixing positionpvc nahani trap ( pvc nahani trap of size 100 x 75mm ) with stainless steel gratings with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( one part of lime, two part of sand and five part of 40mm gauge brick jelly ) and finished with cement mortar 1:3 ( one cement, three sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the ci / pvc pipes, etc., complete complying with standard specification. ( the nahani trap should be got approved by the executive engineer before use on works ) 45 supplying and fixing in position best quality p.v.c soil / waste pipes ( 6ksc ) of various sizes having isi mark and providing leakproof joints including fixing to the wall with p.v.c / m.s clamps etc., and making connection to all sanitaryfittings, dismandling masonry / r.c.c. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110mm pvc 4ksc pipe 46 110mm pvc elbow 47 110mm pvc tee 48 supplying and fixing of 2000 liters capacity hdpe tank with is specification is 10701 / 96 the tank is meant for outdoor ( or ) indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all pvc specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.the rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. ( the water tank should be got approved by the eebefore use on work. { twad page no ; 89 } 49 earth work excavation for foundation in all types of soils and sub soils to full depth ( such as soils in rock / silt / light black cotton soil / ordinary soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the departmental officers with initial lead of 10 m and initial lift of 2 m. complete as per tnss23 & 24, v, vi ( s2 ) , vii, 9, 10 50 lain cement concrete of mix 1 : 4 : 8 ( one part of cement four part of sand eight part of aggregates ) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. tndss no: 28 v, vi ( s2 ) v, vi ( s5a ) vii 51 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing, coloumn pedestals, plith beams, grade beams, staircase steps, etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification without strutting. ( tnss no or nbc no 30 ( s ) 86 86 a v, vi ( s3 ) vii 52 vibrated plain cement concrete 1:2:4 ( one cement, two sand and four hard broken stone jelly ) using 20 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. ( the rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers 30 v, vi ( s5 ) vii & 13 53 providing and laying, spreading and compacting graded stone aggregates to wet mix macadam 250mm thick specification including premixing the materials with water at omc in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth 54 providing and laying of 83mm thick high strength type conforming is 15658 2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 n / mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification. 10 sqm...

Due Date : November 23, 2023

Tender Value : ₹ 20 Lakhs

View Tender
3
Town Panchayats - Tamil Nadu

40645312 tender for construction of community hallat bandhumi in jegathala town panchyayat.; 1 earthwork excavation for foundation and depositing on bank within initial lead of 10mt and lift of 2mt of all soil except rock etc., complete complying with standard specification. 2 p.c.c.1:4:8 mix using 40mm metal and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification. 3 supplying, fabricating and placing in position of steel rods ( m.s or rts ) including cost of binding wire and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification. 4 supplying and erecting steel centering for the sides and soffits of rcc slab or plane surfaces excluding strutting and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification.below 5 supplying and erecting steel centering for the sides and soffits of rcc slab or plane surfaces excluding strutting and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification.above 6 reinforced cement concrete 1:1.5:3 mix using 20 mm size i.s.s. hbg metal mixing, laying and the rate including cost and conveyance of al materials and labour charges etc. complete complying with standard specification. 7 brick work in cement mortar – 1:5 mix using best country bricks and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification. 8 special ceiling plastering in cm 1:3 mix to 10mm thick and the rate including cost and conveyance of all material and labour charges etc. complete complying with standard specifications. 9 plastering in cm 1:5 mix to 12mm thick and the rate including cost and conveyance of all material and labour charges etc. complete complying with standard specifications. 10 plastering in cm 1:4 mix to 20mm thick and the rate including cost and conveyance of all material and labour charges etc. complete complying with standard specifications. 11 finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2 cm laid in cement mortar ( one of cement and three of sand ) mixing with water proofing compound conferment iss at 2% weight of cement used and pointed with samewaterproofing compound mixed with red oxide etc., complete with standard specification 12 white washing two coats using best shell lime, kanji or prickly pear juice water and the rate including cost and conveyance of all material and labour charges etc., complete complying with standard specifications. 13 painting the new walls two coats over one coat ofpriming with best emulsion paint ofapproved colour andquality includingpreparation ofsurfaceandfinishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications. 14 supplying and fixing in position of m.s. doorandms windows the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specifications. 15 painting two coats on new ironwork using best approved quality of ready mixed enamel paint and the rate including cost of all charges etc., complete complying with standard specifications. 16 supply and run of 4 of 6 sqmm ( 84 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade on7 / 20 gi bearer wire for service connection mains ( sd no.68 ) 17 supply and fixing of tneb meter board suitable for 32 a single phase service connection with 32a fues unit ( 500 v ) 32a neutral link and earth link ( 1x18 copper flat ) on tw plant of size 375mm x 300mm x19 with supporiting tw reepers of 1 thick an either side withpainting with suitable bolt and nuts for fixing the tw plank on wall with earth connection and inter connection with 7 / 20 pvc insulated copper wirefrom eb meter to fuse unit ( sd no.126 ) page no 58 18 supply and run of 4 of 6 sqmm ( 84 / 0.3 ) pvc insulated sc unsheathed cu.conductor of 1100v grade in 32mm g.i pipe ( class b bent at both ends with necessary angle iron up right and end supports for mains ( sd no.74 ) page no 38 19 wiring with 2x1.5 sqmm ( 22 / 0.3 ) pvc insulated sc unsheathed cu.conductor cable of 1100 v grade in suitable heavy gauge ms conduit pipe concealed in wall and ceiling with ms accessories with switch box with 5a f.t. switch ( two way ) in flush with wall and convered with 3mm thick hylem sheet for ms switch box with continous earth wire connection of 14 swgtc wire and making good of the concealed portion with suitable colour for concealed stair case light point / fan point ( sd.no.24 ) page no 15 20 wiring with 2x4sqmm ( 56 / 0.3mm ) pvc insulated sc unsheathed cu. cable conductor cable of 1100v grade in suitable heavy gauge m.s.conduit pipe on wall and ceiling with m.s.accessories with 150mm x 100mm x 75mm ms switch box for 15a 3 pin non interlocking cs plug with painting of suitable colour, with continuous earthwire connection by 14 swg tc wire for open power plug point. sd 16 21 supply and fixing of wt bulk head fitting with guard ( philips / bajaj / crompton / k. lite ) suitable for11w cfl lamp with cfl. sd 84 22 wiring with 2 x 1.5 sqm ( 22 / 0.3 ) insuheathedsc cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and celing with pvc accessories with tw switch box and 5a f.t switch in flush with wall150 x 100 x 113 mm tw switch box for 5a 3 pin non inter locking cs plug with continous earth wire connection of 14 swg t.c wire and making good of the concealed portion with suitable colour for concealed pvc plug point ( sd 13 ) ...

Due Date : November 17, 2023

Tender Value : ₹ 20 Lakhs

View Tender
6
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

38816878 stub setting, foundation, erection of towers, stringing of 6nos. acsr zebra conductors and earthwire from loc. 28 to 31 of proposed ottiyambakkam kitspark 230kv dc line for the alternate route to avoid perumbakkam reserve forest crossing...

Due Date : August 10, 2023

Tender Value : ₹ Ref. Documents

View Tender
7
Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

38579678 dcw estimate for supply, stub setting, concreting and erection of towers, stringing of conductors and gi earthwire for deviation of 230kv nctps tondiarpet i & ii dc feeders eht lines based on the request of m / s.iocl, in vallur village under dcw basis in respect of operation circle / north chennai. ( reach i , location ap1 to ap3 ) ...

Due Date : July 25, 2023

Tender Value : ₹ Ref. Documents

View Tender
9
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

35389220 earthwork excavation, providing foundation, supply and erection of 110kv dc tower, stringing of 3 nos of acsr panther conductor and one number of gi earthwire for replacement of deteriorated tower at location no.52 / 56 in 110 kv kadapperi korattur i & ii dc feeder near...

Due Date : December 30, 2022

Tender Value : ₹ 26.10 Lakhs

View Tender
13
Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

34767028 earth work excavation, stub setting, concreting , transporting & erection of mctower, stringing of 6 nos. zebra conductor for making lilo of existing k.r.thoppur pugalur 230 kv scfeeder with 1 no. opgw 48 fibre cable & stringing of 3 nos. panther conductor for conversion ofleopard conductor of 110 kv nallur spur line bydismantling the existing oldtowers, leopard conductor & earthwire of nallur 110 kv spur line of existing pudanchandai namakkal – thatchankurichy110 kv sc feederfrom loc. no. 61 to the proposed nallur 230 / 110 kv ss....

Due Date : November 23, 2022

Tender Value : ₹ Ref. Documents

View Tender
17
municipality - Tamil Nadu

33223641 additional facility to vadasery christopher busstand sl. no. item description 1 additional facility to vadasery christopher busstand 2 dismantling the plain cement concretecleaning away and carefully stocking materials usefull for reuse 3 dismantling the rein forced cement concrete cleaning away and carefully stocking materials usefull for reuse 4 dismantling the brick masonryincementmortorcleaning away at carefully stocking materials usefull for reuse for any thickness at well 5 removing exisiting door and windows including reused and frame, hinges etc 6 removing the damaged asbestos cement sheet without roof timbers 7 refilling the basement with excavated earth in layers of not more than 15 cm thick well rammed watered and consolidated etc. complete with standard specification. 8 earth work excavation for foundation in all types of soils and sub soils to full depth (such as soils in rock / silt / light black cotton soil / ordinary soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the departmental officers with initial lead of 10 m and initial lift of 2 m. complete as per tnss23 & 24, v, vi (s2), vii, 9,10a )coloumn depth of 3m 5m 9 boring, providing and installing bored castin situ reinforcement cement concrete pile of specified diameter and length below the pile cap in cement concrete 1:1.5:3 (1 cement, 1.5 coarse sand, & 3 graded stone aggregate of 20 nominal size) to carry a safe working load not less than specified excluding the cost of steel reinforcement but including bentonite solution mechinery & labour charges etc, all complete. (length of pile for payment shall be measured from bottom of pile to the bottom of pile cap). length of payment shall be measured from bottom pile to the bottom of pile cap 10 supply delivery and filling of river sand in layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per standard specification tnss no. 24 & 25. 11 cement concrete of mix 1 : 4 : 8 (one cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. 12 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii .a)column mat, grade beam & drainage 13 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii. b)coloumn 14 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii. c) circular coloumn 15 supplying anderrectingsteel centering including necessary supportsfor plain surfaces for reinforced cement concrete works such as coloumn footing,coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorscomplying with standard specification( tnss no or nbc no 30(s) 86 86 a v, vi(s3)vii. d) slab & beam 16 providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is staandards. (no separate payment will be made by the department for the excess usage of materials) a) upto basement 17 providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is staandards. (no separate payment will be made by the department for the excess usage of materials) b) ground floor 18 providing and laying in position standardised concrete mix m 20 grade in accordance with is 456 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requiremnents of is staandards. (no separate payment will be made by the department for the excess usage of materials) c) first floor 19 supplying and fabrication of steel and placing in position ms / ribbed tor steel grills for rcc works as per design given including cost of steel and gi binding wire in floors etc., complete complying with standard specification in force per kilogram. 20 brick work in cm 1:5 (one cement & five sand) using iii class ground moulded bricks of size 8 3/4x4 1/4 x 2 3/4 including finishing, curing, etc., complete complying with standard specification 100cft upto basement 21 brick work in cm 1:5 (one cement & five sand) using iii class ground moulded bricks of size 8 3/4x4 1/4 x 2 3/4 including finishing, curing, etc., complete complying with standard specification 100cft upto ground floor 22 brick work in cm 1:5 (one cement & five sand) using iii class ground moulded bricks of size 8 3/4x4 1/4 x 2 3/4 including finishing, curing, etc., complete complying with standard specification 100cft upto first floor 23 brick partition walls using iii class ground moulded chamber bricks of size8 3/4x4 1/4 x 2 3/4 in c.m 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification 10 sqm 24 specialplasteringinc.m. 1 : 3 ( one cement, three sand) to10 mmthickincludingallcostandconveyance ofallmaterialstositeincludingcostofcementwhichwillbepurcharedlocallybythe contractor andconveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. 25 plasteringinc.m. 1 : 4 (1cement 4sand)to12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. 26 cement concrete of mix 1 : 2 : 4 (one cement two sand four aggregates) using 20mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. 27 weatheringcoarsewith concrete broken brick jelly concrete on 20mm. gauge in pure slaked shell lime (no sand to be used) over roof slab be proportion of brick jelly to being 32cft 12.5 cft. well beaten with wooden beaters giving the required shape and thickness as directed by the departmental officers. 28 finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in cement mortar 1:3 (one cement add three sand) 12 mm thick mixed with water proofing compound conforming to iss at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 29 supply and fixing of m.s grills for windows,with one coat of red oxideprimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per isi with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and steel doorcomplete as directed by the departmental officer. 30 supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification. 31 supplying and laying of stainlesssteel hand rails fabricated with 50mm dia 40mm dia and 20mm dia stailess steel pipe used in ramp sideof hand rails and four of stainless steel pipe are welded harijontally at the middile of the hand rails made 18mm s.s. pipe & elegant stainless steel balls are provided in required places of hand rail as directed by the departmental officers. the size including cost of material welding with stainless steel grinding and good polishingand fixed in the hand rails with good position as directed by the departmental officers 32 plain cement concrete 1:8:16 (one cement eight fine aggregates and sixteen coarse aggregates) using 20mm size iss hbg metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 33 dadooing sides of walls with glazed design tiles of size 305 x 200 x 6mm set in cement mortar 1:3 ( one cement, three sand) 20mm thick and pointed with the same colour cement including cost and conveyance of all materials, labour charges complete as per standard specification. 34 floor finishing first quality design ceramic tiles of all colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete 35 supply and fixing of granite slabs (super fine polished with machine cut edges) of sizes4x2 and above 18mm to 20mm thick. laid over a base layer of cement mortar 1:3mix 20mm thick and pointed with white cement and pigment of suit the colour of stones and polished neatly as directed by departmental officers. 36 plain cement concrete of mix 1 : 3 : 6(one part of cement threepart of sand six part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. tndss no: 28 v, vi (s2) v,vi (s5a) vii 37 supplying and laying in flooringwith fully polished sinthetic grey colour granite stone of 20mm thick (average) of 4 x 2 in size laid over base layer of cementmortar 1:3 (one cement and three sand) 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers 38 supplying and painting thewalls with twocoatsweather sealedexterior emulsion paint as instructed by the departmrntal officers includingpreparation of surface curing, etc complete in all floorscomplying with standard specification. ( the colour and shade of the paint shall be got approved by the departmental officers.) 39 painting the new iron works such as steel doors, windows,ventilators windows bars,balustrades etc,in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc,complete complying with standard specification. ( the make, quality and colour of paint should be got approved bythe engineer in charge before use on works )( tnss no or nbc no 61 v vi (54) 3) 40 supply and fixing of pvc soliddoors with necessay accessories and locking arrangements including cost and conveyance of all materials and labour charges etc., complete as per standard specification 41 supplyingand fixing of rcc precast slab withcementconcrete 1:2 : 4mix using 20 mm metal for 200mm thick includingall costandconveyance of all materials and all labour and materials chargesetc complete as per standard specification 42 supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass cp pillar tap, 32mm dia b class gi waste pipe with rubber plug and chain, 15mm dia gm wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia cp brass waste coupling including fixing of wash basin using ci brackets on to the wall in position with tw plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (the wash hand basin and specials should be got approved by the executive engineer before use on works). 43 supplying and fixing in position white glazed indian water closet of size 580 x 440mm of orissa type of approved quality with p or s trap with sand cushion and forming flooring alround the closet using 40mm broken brick jellylime concrete 1:2:5 ; 100mm thick and finishing the top torequired slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / rcc works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmentalofficers. (the water closet should be got approved by the executive engineer before use on works.) 44 supplying and fixing in position urinal of approved quality andmake with p os s trap with double flapped rigid p.v.c. seat cover with c.p. brass hinges,12.5 litres pvclow level flushing tank with all internal fittings etc., complete complying with standard spoecifications 45 supplying and fixing in position white glazed european water closet of approved quality andmake with p os s trap with double flapped rigid p.v.c. seat cover with c.p. brass hinges,12.5 litres pvclow level flushing tank with all internal fittings etc., complete complying with standard spoecifications 46 supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 47 supply and laying of 4 x 16 sq.mm pvc armoured ltug cable in a trench to the excavated at a depth of 0.75 metre putting 0.15 mt. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 48 supply and fixing of brass cable gland for 4 x 16 sq.mm pvc armoured ltug cable, with earth connection. 49 supply and laying of 31/2 x 25 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15mt. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 50 supply and fixing of brass cable gland for 31/2 x 25 sq.mm ltug armored cable with earth connection. 51 supply and run of 25mm x 3mm tinned copper flat necessary clamps / supports on wall / floor / ground floor earth connection. 52 earthing as per the isi specification with an earth electrode of 2.1mt class b gi pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm rcc cover slab for the brick masonry. 53 wiring with 2 x 1.5 sqmm (22 /0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t. switch with continuous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable colour for pvc concealed light point / fan point (for electronic regulator). etc, complete as per standard specifications. 54 wiring with 2 x 1.5 sqmm (22 /0.3 ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories inflush with wall with 150 x 100 x 113 mm tw switch box with 3mm hylum sheet cover for5a 3 pin non inter locking cs plug with continuous earth wire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed pvc plug point.etc, complete as per standard specifications 55 wiring with 2 x 4 sqmm (56 / 0.3mm ) pvc insulated single core unsheathed copper conductor cable of 1100v grade in suitable heavy gauge pvc pipe on wall and ceiling with pvc accessories inflush with wall with 150mm x100mm x75mm ms switch box concealed type with 3mm thick hylum sheet cover for 15a 3pin flush type non inter locking cs plug with continuous earthwire connection of 14 swg tc wire and making good of the concealed portion with suitable colour for concealed power plug point.etc, complete as per standard specifications. 56 supply andfixing of 16 amps dp switch with metal glad of 500v with fuse and nuetral ( side handle) on suitable tw box pwd earthing 57 supply andfixing of 16 ampsfuse unit and neutral ( side handle) on suitable tw box pwd earthing 58 supply and fixing of tneb meter board suitable for 32a single phase service connection with 32a fuse unit (500v) 32a neutral link and earth link (1 x 1/8 copper flat) on tw plank of size 375mm x 300mm x 19mm with supporting tw reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the tw plank on wall with earth connection and inter connection with 7/20 pvc insulated copper wire from eb meter to fuse unit 59 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.a)110mm dia pvc pipe 4 kg/cm2 60 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.b)75mm dia pvc pipe 4 kg/cm2 61 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.c)32mm dia pvc pipe 10 kg/cm2 62 supplying laying and jointing pvc pipes of approved quality and best varity of b class pipe of the following sizes including fixing g.i specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. the pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc., complete.c)25mm dia pvc pipe 10 kg/cm2 63 supplyingandfixingin position best approvedof bis quality 110mm p.v.c rainwaterdownfallpipe having a pressure of 4kg / sq.cm including cost of necessary pvc shoe,pvc bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the rcc roof slab including finishing neatly etc, complete. the rate shall be inclusive of cast of removable cast iron grating. the pvc pipe shall be fixed in wall with special type of uclamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc,completecomplyingwithstandardspecifications. 64 supplying and fixing in position first quality and approved variety of 32mm gun metal gate valve (heavy type) with i.s.i.mark of the following sizes including cost of shellac , thread etc,.including labour for cutting and threading of g.i.pipes etc.,complete complying with standard specifications for both internal and external water supply arrangements. 65 supplying and fixing in position p.v.c. specials such as plain bend, door bend, plain tee, door tee, offsets,y junction, plain or with door of various sizes best quality confirming to i.s.s and providing leakproof joints including fixing to wall and giving connection to the p.v.c, soil stacks, dismadling the brick masonry or r.c.c.floor or roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.a)110mm dai pvc elbow(mould) 66 supplying and delivery of following pvc pipe and specials with isi mark including cost and convience of materials etc completed.. a)75mm dia pvc elbow 4kg 67 75mm dia door elbow 68 75mm dia 45 pvc elbow 69 110mm dia pvc door elbow 70 110mm dia pvc 45 elbow 71 32mm dia pvc elbow 72 25mm dia pvc elbow 73 32mm dia pvc tee 74 25mm dia pvc tee 75 32mmx25mm dia pvc tee 76 25mmx20mm dia pvc tee 77 32 x 25mm pvc reducer 78 supplying and fixing of 2000 liters capacity hdpe tank with is specification is 10701/96 the tank is meant for outdoor (or)indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all pvc specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.the rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. (the water tank should be got approved by the eebefore use on work. 79 supply and fixing of ci nahini / floor trap with stainless steel gratings 100 mm x 75 mm including all charges etc, complete as per standard specification. ...

Due Date : August 09, 2022

Tender Value : ₹ Ref. Documents

View Tender
18
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

32753389 conducting check survey, supply of materials, stringing of panther conductor and earthwire and commissioning of 110 kv dc line on dc towers by making lilo of the existing 110 kv sr pudur kodayar feeder ii at kulasekaram 110 kv ss ....

Due Date : July 21, 2022

Tender Value : ₹ 46.16 Lakhs

View Tender
19
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

32753257 conducting detailed survey, supply of materilas, stringing of panther conductor and earthwire, and commissioning of 110 kv dc line on dc towers by making lilo of 110kv kavanoor manamadurai sivaganga feeder at nallandipuram 110kv ss ....

Due Date : July 21, 2022

Tender Value : ₹ 2.80 Crore

View Tender
20
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

32750699 conducting detailed survey, supply of materials, stringing of panther conductor and earthwire and commissioning of 110 kv dc line on dc towers by making lilo of 110 kv sr pudur thengampudur feeder at mylaudy 110 kv ss under turnkey contract....

Due Date : July 21, 2022

Tender Value : ₹ 2.35 Crore

View Tender
21
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

32703666 erection of 110 kv dc mc towers and stringing of panther conductor and earthwire from loc 147 to terminal tower for erection of 110kv dc line on dc mc towers from nanguneri 230 kv ss to existing melakkallur 110 kv ss . ( reach ii ) ....

Due Date : August 02, 2022

Tender Value : ₹ 2.48 Crore

View Tender
22
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

32010961 supplying and erection of towers and stringing of 110 kv dc line on dc towers with panther conductor and earthwire from tapping loc.13 of 110 kv devarayapuram madhampatty spur line for making lilo for the proposed karunya nagar 110 kv ss supplying and erection of towers and stringing of 110 kv dc line on dc towers with panther conductor and earthwire from tapping loc.13 of 110 kv devarayapuram madhampatty spur line for making lilo for the proposed karunya nagar 110 kv ss...

Due Date : July 11, 2022

Tender Value : ₹ 3.46 Crore

View Tender
23
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

30417706 specification for earthwork excavation, stub setting, concreting, transport and erection of gr tower, restringing of kundha conductor and earthwire and dismantling of 1 no. a tower for replacement of damaged tower at loc 73 in 230 kv alundhur pudukkottai feeder near karparmalai , in pudukkottai district....

Due Date : January 11, 2022

Tender Value : ₹ Ref. Documents

View Tender
24
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

29610358 erection of kco 9m tower, stringing of panther conductor and earthwire in the existing 110kv trichy grid thatchakurichi feeder near kamala nikethan school , trichy under dcw erection of kco 9m tower, stringing of panther conductor and earthwire in the existing 110kv trichy grid thatchakurichi feeder near kamala nikethan school , trichy under dcw...

Due Date : November 05, 2021

Tender Value : ₹ 22.19 Lakhs

View Tender
25
Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

28521271 disposal of scrap available at gcc/trichy , lot 11 . acsr scrap 22822 kgs 2 . aluminium scrap ( bus bar cut bits & clamps ) 1659 kgs 3 . empty gas cylinder of various sizes 9 nos . 4 . ug copper cable scrap ( armoured ) various sizes 1501 kgs 5 . condemned computor monitor with cpu 1 no . available at thennur/gcc/trichy , lot 2 1 . gi/ms tower angle scrap 20081 kgs 2 . gi/ms earth wire scrap 1074 kgs , 3 . ms scrap ( misc ) 5915 kgs , 4 . gi scrap 1093 kgs , 5 . machinary parts scrap 39 kgs , 6 . disc metal scrap with packed clay 174 kgs , 7 . auto parts scrap 24 kgs , 8 . tubelight fitting scrap 6 kgs , 9 . meter parts scrap 120 kgs , 10 . condemned auto transformer cooling fan 2 nos . 11 . various template loose parts ( 14 items ) 1 set , 12 . pc tower loose parts ( 4 items ) 1 set , 13 . ls tower loose parts ( 23 items ) 1 set , 14 . ks tower loose parts ( 10 items ) 1 set , 15 . g tower loose parts ( 3 items ) 1 set , 16 . mounting and elevating structure for 110kv capacitor bank 1 no . available at gcc/trichy , lot 3 . 1 . condemned 11kv potential transformer ( without oil ) make: trans delta 2 nos . 2 . condemned 22kv potential transformer ( without oil ) make: emmess 7 nos . , 3 . defective 110kv cupling capacitor make: cgl 2 nos . , 4 . 230kv potential transformer ( make: bhel ) ( without oil ) 1 no . available at gcc/trichy , lot 4 . 1 . empty oil barrel 40/45 gl cap ( sh ) 1504 , 2 . empty oil barrel 40/45 gl cap ( leaky ) 186 nos . available at gcc/trichy , lot 5 . 1 . aluminium scrap 664 kgs , 2 . acsr scrap 7271 kgs available at substore/thanjavur , lot 6 . 1 . gi/ms tower angle scrap 24454 kgs , 2 . gi earthwire scrap 16484 kgs , 3 . auto scrap 4 kgs , 4 . ms rail cutbits scrap 138 kgs available at substore/thanjavur , lot 7 . 1 . ms scrap ( misc ) 24123 , 2 . g . i . scrap 2422 kgs , 3 . g . i . pipe scrap 161 kgs , 4 . disc metal scrap with clay 4019 kgs available at substore/thanjavur , lot 8 . 1 . ascr scrap 31971 kgs available at substore/viruthachalam , lot 9 1 . ms scrap ( misc ) 14365 kgs . 2 . empty steel drum above 3 feet up to 6 feet 6 nos , 3 . empty steel drum above 6 feet 27 nos . , 4 . disc metal scrap with packed clay 155 kgs , 5 . gi/ms tower angle scrap 422 kgs , 6 . tube light fittings scrap 22 kgs , 7 . gi/ms earth wire scrap 9066 kgs . available at substore/viruthachalam...

Due Date : July 31, 2021

Tender Value : ₹ Ref. Documents

View Tender
28
Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

25457959 tp1 028/2020 21 earthwork excavation , stub setting , concreting , transporting and erection of tower , stringing of 3 nos . panther conductor and 1 no . gi earthwire for 110 kv sc line on dc towers from sathumadurai 230/110 kv ss to sathumadurai 110 kv ss and 110 kv sc...

Due Date : September 30, 2020

Tender Value : ₹ 61.30 Lakhs

View Tender
31
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

25004199 supply of various hardware fittings as per nit , supply of single suspension fittings for acsr panther conductor as per specification and confirming to is and standards , supply of single tension fittings for acsr panther conductor as per specification and confirming to is and standards , supply of double tension fittings for panther conductor as per specification and confirming to is and standards , supply of stock bridge vibration damper for acsr panther conductor as per specification and confirming to is and standards , supply of mid span compression joints for panther conductor as per specification and confirming to is and standards , supply of repair sleeve for panther conductor as per specification and confirming to is and standards , supply of pa rod for acsr panther conductor as per specification and confirming to is and standards , earthwire fittings: supply of suspension fittings for earth wire as per specification and confirming to is and standards , earthwire fittings:supply of tension fittings for earth wire as per specification and confirming to is and standards , earthwire fittings:supply of mid span compression joint for earth wire as per specification and confirming to is and standards , earthwire fittings:supply of aluminium earth bond for earth wire as per specification and confirming to is and standards...

Due Date : August 06, 2020

Tender Value : ₹ 9.60 Lakhs

View Tender
33
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

24514428 supply of spl x arm, labour charges for erection of towers from loc.114 to 116 and stringing of zebra conductors, earthwire from loc. 113 to 116 of 230kv dc line from m / s. omega industrial estate 230 / 110 kv ss to ottiyambakkam 400 / 230kv ss....

Due Date : June 17, 2020

Tender Value : ₹ 17.51 Lakhs

View Tender
35
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

23613632 transporting of towers with stub , cleat , extension parts , conductors and earthwire from various department stores to central stores/gcc/trichy and inter stores transport in gcc/trichy circle through lorry by loading , unloading , weighing and stacking...

Due Date : February 27, 2020

Tender Value : ₹ Ref. Documents

View Tender
36
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

23397420 tender for handling of materials at gcc / central stores / karamadai for the period of 12 months from the date of utilisation 1 loading or unloading including stacking for all type of materials 2 lifting , leading , weighing and stacking of all kind of scrap ( tower angle , gi earthwire etc. ) 3 loading or unloading of crates with counting ( content 4 nos of insulators ) 4 rewinding & measuring the conductor for verifying the correctness of supply and stacking them in the store yard including weighing of empty wooden drum fixing the same in the drum stand and fixing the conductor drum in another drum stand. 5 rewinding & measuring the conductor for verifying the correctness of supply and stacking them in the store yard including weighing of empty wooden drum fixing the same in the drum stand and fixing the earth wire or cable drum in another drum stand. 6 utilization of labour for unquantiable works such as restacking or shifting of materials from one place to another place to assist the stores custodians for issue of materials to field stock verification handing over of section and yard cleaning and jungle clearance 7 sgst to be quoted in percentage ( value alone ) ex. 9%, it should be entered as 9 only 8 cgst to be quoted in percentage ( value alone ) ex. 9%, it should be entered as 9 only 9 inter state gst @18% for other than tamil nadu supplier. if the contractor is within tamil nadu may be quoted as 0 only...

Due Date : February 07, 2020

Tender Value : ₹ 11 Lakhs

View Tender
37
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

23379156 supply, fabrication and erection of structures and substation auxillaries, earthing system and painting of structures ( supply 2 ) and providing various structure and equipment plinths at 11 kv side for the proposed south avinasipalayam 110 / 11 kv substation 1 supply of rsj size 200x100 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 2 supply of ms channel size 125x65 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 3 supply of ms channel size 100x50 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 4 supply of ms angle size 100x100x8 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 5 supply of ms angle size 65x65x6 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 6 supply of ms angle size 50x50x 6 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 7 supply of ms flat size 65x10 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 8 supply of ms flat size 50x6 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 9 supply of ms flat size 25x3 ismb from approved vendors of sail, tata, jindal, rinl, essar steel, jindal steel and power ltd. , jsw steel, tulsyan nec ltd. and prakash ferrous industries pvt ltd., and as per is 2062 and latest issue. 10 labour, machineries, consumables for fabrication of heavy section without length wise welded joints wherever necessary ( sectional weight 14 kg / mtr and above ) ( electricity supply wiil be borne by department ) 11 labour, machineries, consumables for fabrication of light section with joints wherever necessary ( sectional weight below 14 kg / mtr ) ( electricity supply wiil be brone by department ) 12 labour for the erection of the fabricated steel structures heavy section ( 14 kg / m and above ) 13 labour for the erection of the fabricated steel structures heavy section ( below 14 kg / m ) 14 labour for erection of 33 / 22 / 11 kv vcb / sf6 circuit breaker using contract crane arranged by the contractor and including fixing of tandom rod, allignment & support structure providing holes, gas filling whereever necessary as directed by the field engineer 15 labour for erection of 33 / 22 / 11 kv ct, pt, nct, reactor, auto recloser using manual labour ( one s.ph or 3 ph unit ) 16 supply of ct / pt junction box out of 14swg ( 2mm ) m.s.sheet of size 500wx300hx150d wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 17 labour for erection of ct / pt junction box , ac distribution box, yard light box , change over switch including fabrication of clamping arrangements 18 labour for erection of 33 / 22 / 11 kv isolators / ab switches without earth hand operated including erection of insulators and allignment works etc., 19 labour for erection of las including fabrication of base if required station type single / double pole stack 33 or 22 or 11 kv. 20 labour for erection of las distribution type including fabrication of base if required single / double pole stack 33 or 22 or 11 kv. 21 labour for erection of 11 kv / 433 v station transformer with using crane and as directed by the field engineer 22 labour for erection of hg fuse 3 pole set 33 or 22 or 11 kv 23 labour machineries, consumables for erection of earth mat & earth raisers. ( electricity supply wiil be borne by department ) 24 labour machineries, consumables for earth raisers for equipments and structures. ( electricity supply wiil be borne by department ) 25 labour for excavation & refilling of avg.width of 0.3 m & avg depth of 0.8 m for earth mat below fixed yard level 26 labour for excavation & refilling of trunch of avg.width of 0.3 m & avg depth of 0.4 m for laying of control cable / yard light cable below fixed yard level 27 supply of earth spikes by using 40mm m.s. rod & gi earth pipe at a height of 3mts ( 40mm dia, 3m length ) 28 labour machineries, consumables for fabrication & erection of earth spikes without materials including sharpening of top portion & galvanising, welding & clipping the earthwire to earthmat / earthpit ( electricity supply will be brone by department ) 29 erection of 33 / 22 / 11 kv insulators and also fixing of corona bells at the end of bus bar in a complete shape etc., 30 erection of strung bus, labour for stringing of strung bus including hoisting of iron, insulators 33 / 22 / 11 kv single zebra conductor ( 1 span 3 runs ) 31 labour for erection of 50 mm ips aluminium tube bus bar with out making bends with appropriate machineries and consumables 32 labour for providing droppers and jumpers up to height of 6 meters 33 labour for providing droppers and jumpers up to height of 6 meters to 10 meters. 34 supply of `b` class 40 mm gi pipe for extension of tandum / down pipe for ab switches and for any other work as required and as directed by field engineer 35 erection of gi / ms pipe for extension of tandum / down pipe for ab switches and for any other work as required by and as directed by field engineer 36 supply of eye bolt of 18 20 mm dia gi rod of required length including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer. 37 supply of red oxide paint including cost of paint, brush and consumables etc., 38 supply of aluminium paint including cost of paint, brush and consumables etc., 39 supply of enamal paint including cost of paint, brush and consumables etc., 40 labour charges for one primary coat of red oxide painting of various structures after proper surface preparation using approppriate machinery to remove rust / scales etc., 41 labour charges for two coat of aluminium painting of various structures after proper surface preparation using approppriate machinery to remove rust / scales etc., 42 labour charges for one coat enamal painting / anti corrosive painting of chequrred plates, equipment board, identification of earth pit board and yard light pole, structure earthing, earth mat, earth pit, shoe paint of iron & steel items as directed by the field engineer. 43 transporting of iron & steel items from coimbatore to site ( 70 km ) 44 labour for loading or unloading or shifting of non fragile materials 45 labour for loading / unloading / shifting of department non fragile materials of 11 kv isolators ( ab switches ) at stores to site by the contractor without using board crane for one operation 46 labour for loading / unloading / shifting of department non fragile materials ofaluminium bus bar 50 mm ( 2 ) ( 15 length ) at stores to site by the contractor without using board crane for one operation. 47 labour for loading / unloading / shifting of department fragile materials of 11 kv circuit breaker at stores to site by the contractor without using board crane for one operation. 48 labour for loading / unloading / shifting of department fragile materials of 11 kv ct / pt / las / dt at stores to site by the contractor without using board crane for one operation. 49 labour for loading / unloading / shifting of department fragile materials of 11 kv hg fuse unit with accessories at stores to site by the contractor without using board crane for one operation. 50 labour for loading / unloading / shifting of department fragile materials of 11 kv insulators at stores to site by the contractor without using board crane for one operation. 51 labour for loading / unloading / shifting of department fragile materials of 11 kv, 120 kn disc insulators at stores to site by the contractor without using board crane for one operation. ( 11 kv ct, pt ) 52 supply of m8, m9, m10, m12 & m16 full thread gi bolt, nuts & gi washer of various size for erection of insulator or any other purpose wherever required and as directed by the field engineer. 53 clearing light jungle and disposing off to a place away from the site as directed by the engineer in charge including all labour charges, t&ps etc., complete. 54 earth work excavation for foundation in hgs and and depositing on bank with initial lead of 10 m and initial lift of 2 m in hard stiff clay stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard specification as directed by the engineer at site. 55 earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock ( or ) kankar not requiring blasting as per standard specification as directed by the engineer at site. 56 earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in medium rock and dense medium rock not requiring blasting as per standard specification as directed by the engineer at site. 57 earth work excavation for foundation in hard rock by wedging and chiseling and trimming to proper shape where blasting is prohibited and stacking for measurements including all leads, lifts etc., as per standard specification and as per instruction of the engineer at site. 58 plain cement concrete in cc 1:3:6, using 20 mm hbg metal, for foundation / padding concrete excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard specification complete. 59 plain cement concrete in cc 1:2:4, using 20 mm hbg metal, for foundation excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard specification complete. 60 rleinforced cement concrete in rcc 1:1.5:3, using 20 mm hbg metal, excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard specification complete. 61 rleinforced cement concrete in rcc 1:1.5:3, using 20 mm hbg metal, for culvert slab with form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard specification complete. 62 providing steel form box for plinth concrete in correct alignment as directed by the site engineer in charge including cost of steel shuttering, angles, flats, labour lead lift etc as per standard specification complete. 63 labour charge for fixing template in correct leval and alaignment etc as per standard specification complete. 64 supplying and fabrication of grouting bolt of 18mm / 20mm dia of 1.20m length with bottom pending of 20 cm and top galvanaised threaded portion 15cm including cost of all materials, 2 no gi nut , washers with all lead , lift labour charges , as per specification etc , complete. 65 brick work with c.m. 1:3, using class ii chamber burnt bricks including cost of all materials, labour, curing all lead, lift as per standard specification, etc., complete. 66 providing steel reinforcement with ms / rts rods of reputed approved make for reinforced concrete works, including cost of steel ms / rts rods, binding wire, minor t&ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per standard specification 67 plastering c m 1: 3, 12 mm tk including cost of all materials, labour, curing all lead, lift as per standard specification, etc., complete. 68 colour washing with two coats of cement paint over two coats of white cement of approved quality smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as paint, and scaffolding, labour, lead, lift etc., complete. 69 sgst to be quoted in percentage ( value alone ) ex. 9%, it should be entered as 9 only 70 cgst to be quoted in percentage ( value alone ) ex. 9%, it should be entered as 9 only 71 inter state gst @18% for other than tamil nadu supplier. if the contractor is within tamil nadu may be quoted as 0 only...

Due Date : February 07, 2020

Tender Value : ₹ 43.90 Lakhs

View Tender
38
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

22413661 supplying 110 kv kcr and hcr towers with stub and cleat, providing stub setting, concreting and stringing of 6nos panther conductor with 1no earthwire for conversion of existing 110 kv sc line on sc towers with leopard conductor into 110 kv dc line on dc towers with panther conductor from loc no.246 of 110 kv ponnapuram – ingur feeder i to kangeyam 110 kv ss reach i ( loc 1 and 2 ) ...

Due Date : November 13, 2019

Tender Value : ₹ 18 Lakhs

View Tender
39
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21959714 earthwork excavation,stub setting,concreting, transport and erection of tower from take off to loc 1 & 2 and stringing of panther conductor and earthwire for 110 kv dc line on dc tower by making lilo of the existing neyveli aduthurai 110 kv feeder at the proposed melapalaiyur. (c.keeranur )110/33 11kv ss ...

Due Date : October 10, 2019

Tender Value : ₹ Ref. Documents

View Tender
40
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21493052 t . s . no . 40/2019 20 of se/gcc/slm ( gl ) dismantling of towers , conductor with earth wire , erection of towers , stringing of conductor , gi earthwire in the conversion of existing 110 kv sc line on sc towers into sc line on dc towers from kanchipuram kaveripakkam110 kv ss ( loc . 50 95 ) ( damal...

Due Date : September 05, 2019

Tender Value : ₹ 36.70 Lakhs

View Tender
41
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21408323 t . s . no . 38/2019 20 of se/gcc/slm ( gl ) ewe , erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 104 119 reach 7...

Due Date : August 29, 2019

Tender Value : ₹ 39.10 Lakhs

View Tender
42
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21408000 erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 66 83 reach 5...

Due Date : August 29, 2019

Tender Value : ₹ 34.80 Lakhs

View Tender
43
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21407994 tender for erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 83 103 reach 6...

Due Date : August 29, 2019

Tender Value : ₹ 40.60 Lakhs

View Tender
44
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21404047 tender for erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 48 66 reach 4...

Due Date : August 29, 2019

Tender Value : ₹ 34.70 Lakhs

View Tender
45
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21399612 erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 15 32 reach 2...

Due Date : August 28, 2019

Tender Value : ₹ 38.60 Lakhs

View Tender
46
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21399571 erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 32 48 reach 3...

Due Date : August 28, 2019

Tender Value : ₹ 33.40 Lakhs

View Tender
47
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21393327 erection of towers , stringing of 3 nos . panther conductor and 1 no . gi earthwire , dismantling old towers and conductors in 110 kv pudhansanthai thachankurichy feeder between namakkal 110 kv ss , thathaingarpet 110 kv ss loc . 1 14 reach 1...

Due Date : August 28, 2019

Tender Value : ₹ 38.40 Lakhs

View Tender
48
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21349846 earth work excavation, stub setting, concreting, transporting and erection of towers for 110 kv dc line on dc tower with stringing of 6 nos. acsr panther conductor and 1 no. gi earthwire by making lilo of the existing k.r.thoppur – barriage –ii 110 kv feeder at the proposed adaiyur 110 / 22 kv ss loc. 21 to 31 ( reach 3 ) ...

Due Date : August 26, 2019

Tender Value : ₹ 38.20 Lakhs

View Tender
49
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21349842 earth work excavation, stub setting, concreting, transporting and erection of towers for 110 kv dc line on dc tower with stringing of 6 nos. acsr panther conductor and 1 no. gi earthwire by making lilo of the existing k.r.thoppur – barriage –ii 110 kv feeder at the proposed adaiyur 110 / 22 kv ss loc. 11 to 20 ( reach 2 ) ...

Due Date : August 26, 2019

Tender Value : ₹ 33.70 Lakhs

View Tender
50
Tamil Nadu Transmission Corporation Limited - Tamil Nadu

21349781 earth work excavation, stub setting, concreting, transporting and erection of towers for 110 kv dc line on dc tower with stringing of 6 nos. acsr panther conductor and 1 no. gi earthwire by making lilo of the existing k.r.thoppur – barriage –ii 110 kv feeder at the proposed adaiyur 110 / 22 kv ss loc. 1 to 10 ( reach 1 ) ...

Due Date : August 26, 2019

Tender Value : ₹ 39.60 Lakhs

View Tender