Department Of Atomic Energy - Tamil Nadu

33854325 bids are invited for revolving chair with arm rest central tilt ( q3 ) , revolving chair with arm rest ( q3 ) , cantilever visitor chair with arm ( q3 ) ...

Department Of Heavy Industry - Tamil Nadu

33674145 bids are invited for supply of 1 base plate for double support channel 2 base plate for single support channel 3 double support channel 4 single support channel 5 cantilever arm 620 mm length 6 cantilever arm 320 mm length 7 m6 fastners set comprising of 1 no m6 pan head screw 1no spring nut & 1no washer for fixing perforated type trays with cantilever arm 8 clamp for single channel cc1 9 tray clamp for ladder type cable trays 10 m12 fastner set comprising of 1no each m12 hex.bolt, spring nut&washer for fixing base plate, c / a, ladder trays & clamps / support channels 11 90 degree angle fitting item no 7 12 clamp for double channel cc2 13 right angle heavy duty bracket b2 bracket 14 straight fitting total quantity : 269493...

Southern Railway - Tamil Nadu

33487787 supply of fabricated and galvanized small partsfabricated and galvanized small parts,fabricated and galvanized small parts steel (sps) other than mast as per is:2062 (2011); is:800 (1) stay arm/bracket chair fitting as per ri no.3050 (rdso drg.no. eti/ohe/p/3050) weight 0.033095 mt quantity 12 nos total weight 0.39714mt (2) multi cantilever cross arm assembly as per drg no. eti/ohe/p/3120 complete set ri no.3121 1 no, 3122 2 nos, 3076 2 2 no of total weight 0.02838mt (3) drop arm bfb 6x6 (drg.no.eti/c/0076sh 1) weight 0.127396 8 nos total weight 8x01.27396 1.019168mt (4) drop arm fixing channel part 4 (drg.no. eti/c/0076 a) weight 0.1649 mt 8 nos total weight 8x0.015458 0.123664mt. total weight of sps of 1.568352mt...

Manonmaniam Sundaranar University - Tamil Nadu

33260097 tender document for supply, installation and commissioning of atomic force microscopy with accessories 1. atomic force microscopy system 2. modes of operation 3. sample stage and camera 4. cantilevers 5. data acquisition and control software 6. warranty 7. service and support...

Department Of Heavy Industry - Tamil Nadu

32875169 bids are invited for fcts for udangudi 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 r79843900012 cantilever arm 500 mm length r79843900013 staight fitting r79843900014 beam clamp r79843900015 heavy duty angle fitting r79843900016 cantilever arm 200 mm length r79843900006 cantilever arm 350 mm length r79843900007 m6 fastners set comprising of 1 no m6 pan head screw 1no spring nut & 1no was her for fixing perforated type trays wi th cantilever arm r79843900008 clamp for single channel cc1 r79843900009 tray clamp for ladder type cable trays r79843900010 m12 fastener set comprisig of 1 no each m12 hex bolt, spring nut & washer for fixing base plate, c / a ladder trays & clamp / support channels r79843900011 90 degree angle fitting r79843900001 base plate for double support chan nel r79843900002 base plate for single support chan nel r79843900003 double support channel r79843900004 single support channel r79843900005 cantilever arm 650mm length auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( for anunlimited time ) total quantity : 1...

Military Engineer Services - Tamil Nadu

32767686 provision of toilet neat main gate entrance of age ( i ) r&d office at cvrde avadi 1 excavation in trenches n. exc 1.5 m in depth for foundation etc and getting out in hard / dense soil. 2 surface excavation in hard dense soil n.exc ( not exceeding ) 30cm deep and averaging 15 deep and getting out in hard / dense soil. 3 m & l for pcc type d2 1:4:8 ( 40 mm graded aggregate ) cement concrete in foundations, filling, concrete bed to drain pipes and mass concrete 4 m&l brick work with sub class ‘b’ bricks curved on plan exc 6 m mean radius built in cement mortar 1:6 5 m&l brick work with sub class ‘b’ bricks curved on plan exc 6 m mean radius built in cement mortar 1:4 6 m&l brick work with sub class ‘b’ bricks curved on plan exc 6 m mean radius built in cement mortar 1:4 in half brick thick walls 7 returning filling including spreading, levelling watering and well ramming in layers not exc 25 cm thick complete 8 removal of excavated soil exe 250m but not exe 500 m and deposited where directed. 9 m & l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; verticle or to batter fair finish surface. 10 m & l for formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finish surface 11 m & l for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finish surface 12 m&l for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick ( horizontal or sloping ) 13 m & l formwork to chullah hoods, chajjas, troughs and similar items including edges fair finish 14 form work to edges of concrete slabs exc 10 cm but not exc 20 cm thick 15 m&l tmt bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hookingends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed. 16 all as per srl item no 1.14 here in before but6mm to 8mm dia and stirrups complete all as specified and directed. 17 m&l for rcc m30 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concreteall as specified and as directed. 18 m&l forrcc m30 in columns, pillars, piers, posts and struts complete all as specified. 19 m & l for rcc m30 in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. 20 m & l for rcc m30 in slab supported on walls, beams, and column in floors, roofs, landings, balconies, canopies, deck slabs and inshelves, chajja complete all as specified. 21 m & l for rendering 15mm thick cement mortar in two layers i.e 10mm in cm 1:6 and5mm in cm 1:4 mixed with with approved water proofingcompound as per manufacturer instruction on fair faces of brick work or concrete surfaces.note: wpc measured and paid separtely. 22 m&l rendering 10mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and evenwithout using extra cement complete all as specified 23 m&l rendering 12mm thickin cement mortar ( 1:6 ) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. 24 m&l non skid glazed ceramic coloured ( light colour as approved ) tilesof size 300x300x7 8 mm thick as in flooring set and jointed in neat cement slurry over & including 15 mm thick screed in cement mortar ( 1:6 ) as in floors / sub floors and pointed in white cement with pigment to match the colour of tiles complete all as specified. 25 m&l glazed ceramic coloured tiles in vertical surface 350x 250x 7mm / 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 1:4 cm 10mm thick rendering rough finishedto recive tiles as in skirting / dado. 26 m&l granite galaxy 20mm thick factory polished fixedwithcement slurrypointing with coloured pigment to match the granite including cutting to shape, grinding, polishing bulnosing etc in floors with 15mm thick screed bed in cement mortar ( 1:6 ) all as specified anddirected by the engineer in charge. 27 m & l 75mm thick pccd2, 1:4:8 ( 40mm graded aggregate ) in subbase offlooring complete all as specified. 28 m &l for broken stone hardcore of gauge n exc. 63mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. 29 m&l for cement concrete ( 1:2:4 ) type b 1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by engr in charge and complete all as specified. 30 m&l rendering 15 mm thick screed / cement plaster in cm 1:3 with wpc on rcc surfaces of roof / brick walls finished fair and even while the concrete is green. note : wpc shall be measured and paid seperately. 31 supply only integral water proofing compound. 32 m&l for app based polymeric membrane minimum weighing 3.5 kg / sqm and minimum 3mm thick reinfored with polyster non wooven fabric ( wt not less than 160gm / sqm ) laid over primed surfaces includingbituminous primer conforming to is 3384applied @ 0.3 ltr / sqm byby forced all as specified and directed.four course roof treatment consist of as under: ( i ) applying one coat of bituminous primer conforming to is 3384 @ 0.3 ltr / sqm. ( ii ) laying of app based membrane as specified thickness and weight. ( iii ) applying one coatbitumen grade 85 / 25@1.2kg / sqm. ( iv ) applying two coataluminium paint @100ml / sqm. 33 s&f solid pvc door frame of size 50mmx47mm made out of 5mm plain colour pvc sheetreinforced with ms square tubes s&f opening as per specification & drawings complete all as specified. 34 s&f factory made soild pvc moulded door shutter 28 to 30mm thick ( stiled ) with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face and 2mm plain colour pvc sheet on back face with particle board core. 35 s&f 125mm long ptmt butt hinges fixed with necessary screws powder coated any colour complete all as specified and directed. 36 s&f 150mm long ptmt handles powder coated any colour oval type complete all as specified coloured 125 mm long fixed all as specified and directed. 37 s&f 150mm long ptmt barrel tower bolts powder coated any colour complete all as specified and directed. 38 s&f 250mm long aluminum sliding door bolt powder coated any colour, with hasp and staple bolt type all as specified and directed. 39 supply and fix anodised aluminium, powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 40 s&f alumnium powder coated louvers ( movable arrangement in pair ) for ventilators including locking arrangement complete all as specified and as directed 41 s&f figured glass coloured pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as directed. 42 m&l for pvc ( swr ) floor trap 75 mm dia , including 40mm dia hdpe pipe up to the trap of bath room and jointing with solventwith outlet pipes, stainless steel grating etc fixed all as specified. 43 m&l pvc ( swr ) gully trap 125 / 110 mm, setting and jointing with solvent cement with outlet pipesand pcc 1:2:4 filling around trap and 25mm thick coverslab ( size as directed by eic ) complete all as specified. 44 s&f of 110 mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, fixed and laid in trenches / floors including distance pieces complete all as specified and directed. 45 s&f of 75 mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in swr pipes complete all as specified and directed. 46 s&f 110 mm pvc ( swr ) bend of any radius 47 s&f pvc ( swr ) junction single, ( single t ) equal or unequal for 110mm dia pipe 48 s&f 110 / 75 mm dia pvc ( swr ) reducers connected to door bend with access door complete all as specified 49 s&f 110 mm trap p or s trap pvc ( swr ) complete all as specified. 50 s&f 75 / 110 mm dia pvc ( swr ) vent cowl. 51 s&f vitreous china squatting pan, orissa pattern, size 580x440mm white / coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti syphonage pipe, etc. fixed complete all as specified. 52 s&f pvc 10 ltr. capcityvalveless syphonic action type, flushing cistern, low level, white / coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc with all neccassary fittings complete all as specified directed. 53 s&f in 15 mm size pvc connections with ptmt nuts of 450 mm long complete all as specified. 54 s&f vitreous china urinal, bowl type, coloured , flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinal to plugs fixing with brackets, flush pipe, grating and union for 32mm dia pvc pipe discharge pipe connection to drain etc. 55 s&f urinal spreader of ptmt any colour for fixing with 15 mm dia pipe ( minium weight 60gms ) 56 s&f wash hand basin flat back 550x400mm vitreous chine ( white ) with cantilever brackets embedded in concrete block including the following and fixed in repairs complete all as specified ( a ) brass chromium plated waste coupling 32mm bore size ( b ) waste pipe pvc 32mm bore ( c ) angle iron / cast iron brackets ( d ) cp fancy type pillar cock 15 mm dia. 57 s&f 600x 450 mm leveled edged mirror, 5mm thick of selected quality glass mounted on hard board covered with pvc moulding as per sample kept in ge office and fixed to wooden plugs with chromium plated brass screwed all as directed. 58 m&l soap shelf, pvc white / colour appx size 450 x 125 x 40mm ( as per sample ) . make: prayag or equivalent 59 s&f in repar tubular towel rail 20mm dia d type60cm long between flanges brass chromium plated. 60 s&f bib taps, cp, fancy type screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified. 61 s&f bathroom cabinet pvc with mirror suitable for to keep the bathroom items, size 400 x 500mm, white colour all as specified. make : priyag ( cat. no 554 ) 62 s&f stop valves, fancy type, cp with long shank and cup ( concealed typee ) , screwed both ends for 15mm bore of iron pipe or for union and fixed all as specified. 63 s&f gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15mm bore pipe all as specified and directed. 64 s&f gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe all as specified and directed. 65 s&f in mild steel galvanized tubing 15 mm bore medium grade with fittings to walls, ceiling or laid on floor all as specified. 66 s&f in mild steel galvanized tubing 20 mm bore medium grade with fittings to walls, ceiling or laid on floor all as specified. 67 s&f ofrotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) 1000 ltr capesity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe complete all as specified and directed. 68 m&l preparing new plastered surfaces and applying two coats of white wash on soffits / ceilings etc; complete all as specified or as directed. 69 preparation of new plastered surface and apply two coat of cement base paint over a coat of primer with 2mm thick wall care putty complete all as specified. 70 preparation of newly plastered surfaces of walls and applying two coats of distemperoil emulsion over a coat of chalk whiting, on plastered surfaces with 2mm thick wall care putty complete all as specified. 71 m&l chequered cement colouredconcrete tiles 300mm x 300mm x 25mm, set, jointed and pointed in thick neat cement slurry in floors and pointed with white cements and pigments andincluding 15 mm thick screed in cement mortar ( 1:6 ) as in floors / sub floors and pointed in white cement with pigment to match the colour of tiles complete all as specified. 72 cutting existing galvanized ironwater supply pipe line up to 100 mm dia for inserting suitable size gi tee and socket of size 20mm dia for taking branch connection complete all as specified.note: excavation shall be measured and paid seperately. 73 m&l of 150mm bore salt glazed stone ware pipe grade ‘a’ as in trenches at any depth complete all as specified ( excavation , earth work & concrete shall be measured and paid separately ) . 74 m&l pcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate as in benching for manholes, bands , coping , bed plate etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smoothwithout using extra cement 75 extra for forming fair finish to drain or channel 30cm internal girth in cement concrete using extra cement inl. forms moulds / mitred stopped ends etc. 76 m & l precast rcc 1:2:4 type b1 using 20mm graded crushed stone agg as in manhole cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in cm all as specified and directed by engr in charge. 77 cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1 / 2 round or 3 / 4 section ) in cement concrete 1:2:4 type b 1 smooth finished, and reforming bench ing as required ( internal dia of pipe in 150mm ) 78 m&l for point wiring with pvc insulated, frls pvc unsheathed, two single core, stranded, copper conductor cable 1.5 sqmm size, 1100v grade, drawn into and including concealed rigid non metallic pvc conduit not less then 20mm wide, isi marked with 1.5 sqmm unsheathed, stranded copper frls cable for continuous earth wire and including pressed modular metal concealed terminal boxes of reqd size and suitable size inner frame with outer cover suitable for modular switches / sockets / regulators all as specified & directed for the folowing : ( a ) one light / fan controlled by one switch 79 s&f switch piano flush type, 6 amps, 230v ac, single pole, one way. 80 s&f ceiling rose, surface type, bakelite 65x50mm three terminal 81 s&f batten 4 feet led tube light fitting 18w high lumen efficiency, min 5700k and extruded aluminium body with suitable electronic driver, 230vwith all accessories pre wired, connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable ftl fitting any type any watts all as specified and directed.make: havells / wipro / philips 82 s&fbatten 2 feet led tube light fitting 10w high lumen efficiency, min 5700k and extruded aluminium body with suitable electronic driver, 230vwith all accessories pre wired, connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable ftl fitting any type any watts all as specified and directed.make: havells / wipro / philips 83 sub main wiring with 2 runs of single core 2.5 sqmm 1100 volts grade, frls pvc insulated, unsheathed cable, copper conductor, multistranded drawn through and incl provision of isi markedpvc conduit 20mm dia medium grade surfcaein walls / roofs / floors etc., including provision of one run frls pvc insulated 2.5 sqmm copper conductor as earth continuity conductor and connecting to common earth dolly incl taking down u / s aluminium wiring complete all as specified and directed. note: two runs of 2.5sqmm cable, one run of earth continuity conductor shall be measured as one unit length and pvc conduit shall be measured under relevant items. 84 supply and fix ventilating fans ventil air dx white 250mm sweep, 230 / 240 volt mounting ring and louvers and shutters with clamp sets, nuts and bolts suitable for ventilatort fansincluding provn of connecting cable 1 sqmm, 3 core, pvc insulated all as specified and directed. 85 supply and fixing inof energy efficient led building security fitting of not less than 30 watt, epoxy powder coated pressure die cast aluminium housing and toughened glass with ip 66 degree of protection, system luminous efficiency morethan 100 lumens / watt and pf>0.9 with voltage range 140 to 270 volt, fitting should be provided wih inbuilt 10 kv minimum surge protection, short circuit and over voltage protection facility for driver and fitting including making electrical connection for cable connection complete all as directed. note : cable for connection of led light fitting andincluding mounting bracket of gi pipe 32 mm bore bend to shape with 2 nos ms flat 32 x 3 mm thick with suitable nuts & bolts for mounting the fitting shall be is included in this item and nothing shall be paid extra on this account 86 s&f sheet metal enclosure ( mcb db ) , single phase and neutral with suitale amps rated bus bar, double door type, 240 volts 4 way 87 s&f mcb single pole, 240 volts, 6amps, c series, 10 ka breaking capacity & connection complete all as specifed and directed. 88 s&fmcb single pole & neutral10amp, 240 volts, c series, 10 ka breaking capacity & connection complete all as specifed and directed. 89 s&f fix inearthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including using of 4 mm gi wire as earthing leadby means of bolts, nuts, check nuts and washers of galvanised steel , connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil / rock, pcc 1:3:6 type c1, earthing chamber, precast rcc slab 50mm thick in cement concrete 1:2:4 type b1 reinforced with welded steel wire febric weight hot less than 4 kg / sqm, funnel with gi watering pipe of 20mm bore, medium grade wire mesh and lugs, gi protection pipe of 15mm bore light grade upto 7.50 mtr long test point etc all as specified and directed....

Police Department - Tamil Nadu

32738313 supply and installation of road safety equipments 2020 2021 1 .p.a system for vehicle 1no. 2. speaker 2 nos 3 . mobile hand microphone with rectactable wire 1 no. 2. breath analyzersupply , installation and maintenance of automatic signal 4 waytraffic signal aspecttraffic signal pole, cantilever pole dimension ‘l’ type, pole dimension ‘i’ type , countdown timer ( cdt ) , controller cables etc...

Department Of Atomic Energy - Tamil Nadu

32183920 bids are invited for revolving chair with arm rest central tilt (q3) , revolving chair with arm rest (q3) , cantilever visitor chair with arm(q3) total quantity : 270...

Highways Department - Tamil Nadu

31846084 providing cantilever gantry board providing metal crash barriers on government roads in kallakurichi h c m sub division tvm 137...

Highways Department - Tamil Nadu

31846080 providing cantilever gantry board providing metal crash barriers and including road furniture works on government roads in ulundurpet h c m sub division tvm 134...

Highways Department - Tamil Nadu

31846048 providing cantilever gantry board, providing metal crash barriers and including road furniture works on government roads in kallakurichi h c m sub division tvm 128...

Southern Railway - Tamil Nadu

31774765 supply of fabricated and galvanized small partsfabricated and galvanized small parts,fabricated and galvanized small parts steel (sps) other than mast as per is:2062 (2011); is:800 (1) stay arm/bracket chair fitting as per ri no.3050 (rdso drg.no. eti/ohe/p/3050) weight 0.033095 mt quantity 12 nos total weight 0.39714mt (2) multi cantilever cross arm assembly as per drg no. eti/ohe/p/3120 complete set ri no.3121 1 no, 3122 2 nos, 3076 2 2 no of total weight 0.02838mt (3) drop arm bfb 6x6 (drg.no.eti/c/0076sh 1) weight 0.127396 8 nos total weight 8x01.27396 1.019168mt (4) drop arm fixing channel part 4 (drg.no. eti/c/0076 a) weight 0.1649 mt 8 nos total weight 8x0.015458 0.123664mt. total weight of sps of 1.568352mt...

Highways Department - Tamil Nadu

31450689 tn no 27 2021 22 hdo dt 07 03 22 cridp udp tvm 134 providing cantilever gantry board providing metal crash barriers and including road furniture works on government roads in ulundurpet h c and m sub division tvm 134...

Highways Department - Tamil Nadu

31450631 tn no 28 2021 22 hdo dt 08 03 22 cridp kki tvm 137 providing cantilever gantry board providing metal crash barriers on government roads in kallakurichi h c and m sub division tvm 137...

Highways Department - Tamil Nadu

31434108 tn no 26 2021 22 hdo dt 03 03 22 cridp wlj tvm 130 providing cantilever gantry board providing metal crash barriers on government roads in walajah h c and m sub division tvm 130...

Highways Department - Tamil Nadu

31434081 tn no 26 2021 22 hdo dt 03 03 22 cridp kki tvm 128 providing cantilever gantry board providing metal crash barriers and including road furniture works on government roads in kallakurichi h c and m sub division tvm 128...

Highways Department - Tamil Nadu

31434076 tn no 28 2021 22 hdo dt 08 03 22 cridp vnd tvm 136 providing over head gantry board providing cantilever gantry board providing metal crash barriers providing speed breakers on government roads in vandavasi h c and m sub division tvm 136...

Highways Department - Tamil Nadu

31434062 providing cantilever gantry board providing over head gantry board providing metal crash barriers on government roads in gudiyatham h c and m sub division tvm 138...

Directorate Of Technical Education - Tamil Nadu

31274818 acoustic grating kits, photo electric effect kits and meldes string kits acoustic grating kits, photo electric effect kits and meldes string kits , equipments for physics department , acoustic grating kit , photo electric effect kit , meldes string experiment kit , simple harmonic oscillations of cantilever experiment set => limited...

Government Engineering College - Tamil Nadu

31213391 marking table marking table , marking table refer notice inviting tender for specification , pedestal bench grinder refer notice inviting tender for specification , rod cutting machine with universalvice refer notice inviting tender for specification , double side cantilever racking system refer notice inviting tender for specification => limited...

Southern Railway - Tamil Nadu

31129592 supply of replacement / maintenance works such as elimination of mast less than 2.4 m implantation, leaning mast atterntion, monkey scare provision, replacement of rusted cantilever and bonds in salem division....

Government Engineering College - Tamil Nadu

30833226 marking table and othrs marking table and othrs , marking table refer notice inviting tender for specification , pedestal bench grinder refer notice inviting tender for specification , rod cutting machine with universalvice refer notice inviting tender for specification , double side cantilever racking system refer notice inviting tender for specification...

Directorate Of Technical Education - Tamil Nadu

30653966 equipments for physics laboratory equipment for physics laboratory , equipments for physics lab , post office box determination of band gap of a semiconductor ( complete set ) , melde’s string experiment ( complete set ) , simple harmonic oscillations of cantilever ( complete set ) => limited...

Southern Railway - Tamil Nadu

30630137 auction sale of cond. and u / s ohe scrap such as fs / gi angle channel, cut mast, anchor fitting assembly, pipe, bend pipe, tube rod / guy rod guy rod fitting, back angle drop arm, cut mast top / bottom mast fitting, adjustor, ending cone, mast chair fitting, isolator set, adaptor, cantilever assembly, dm base & bm base structure, number plate, caution board, ohe mast scrap, ohe gi scrap such as bolts , nuts, pipes, plates , hooks, with / without rope bracket, arm hook, double pole isolator, anti falling device rod, out trigger and arcing horn, stand u clamp, washer insulator cap, notice board and all other released ohe scrap / gi scrap in nature of sorts and sizes as is where is condition. note: 1 ) cutting permitted to heavy nature items only. 2 ) loading by crane is also permitted. pl.no. 98030309....

Southern Railway - Tamil Nadu

30584541 replacement / maintenance works such as elimination of mast less than 2.4 m implantation, leaning mast atterntion, monkey scare provision, replacement of rusted cantilever and bonds in salem division.replacement / maintenance works such as elimination of mast less than 2.4 m implantation, leaning mast atterntion, monkey scare provision, replacement of rusted cantilever and bonds in salem division., ...

Bharat Heavy Electricals Limited - Tamil Nadu

30442462 bids are invited for clamps and fittings flat plate tee fitting (pf1) as per boq sl. no. 1.4 (iv) (q3) , clamps and fittings tray fixing clamp tc1 as per boq sl. no. 1.4 (v) (q3) , single channel (sc 1) (standard legth of 6 meters per piece) as per boq sl. no. 1.1 (q3) , clamps and fittings clamp (cc2) as per boq sl. no. 1.4 (i) (q3) , clamps and fittings beam clamps (bc1) as per boqsl. no. 1.4 (iii) (q3) , clamps and fittings frp trayfixing clamp as per boq sl. no. 1.4 (vi) (q3) ,cantilever arm for 300mm wide trays (350mm) as perboq sl. no. 1.3 (i) (q3) , clamps and fittings base plate(bp1) as per boq sl. no. 1.4 (ii) (q3) total quantity : 17920...

Department Of Heavy Industry - Tamil Nadu

30163377 bids are invited for clamps and fittings flat plate tee fitting (pf1) as per boq sl. no. 1.4 (iv) (q3) , clamps and fittings tray fixing clamp tc1 as per boq sl. no. 1.4 (v) (q3) , single channel (sc 1) (standard legth of 6 meters per piece) as per boq sl. no. 1.1 (q3) , clamps and fittings clamp (cc2) as per boq sl. no. 1.4 (i) (q3) , clamps and fittings beam clamps (bc1) as per boqsl. no. 1.4 (iii) (q3) , clamps and fittings frp trayfixing clamp as per boq sl. no. 1.4 (vi) (q3) ,cantilever arm for 300mm wide trays (350mm) as perboq sl. no. 1.3 (i) (q3) , clamps and fittings base plate(bp1) as per boq sl. no. 1.4 (ii) (q3) total quantity : 17920...

Madurai Corporation - Tamil Nadu

29961127 providing digitally printed fluorescent coloured retro reflectorized sign board using latex printer and digitally retro reflectioned overhead cantilever gantry providing digitally printed fluorescent coloured retro reflectorized sign board using latex printer and digitally retro reflectioned overhead cantilever gantry...

Madurai Corporation - Tamil Nadu

29961124 providing retro reflectorized sign board using latex printer in digitally printed retro reflection overhead cantilever gantry informatory sign boards and retro providing retro reflectorized sign board using latex printer in digitally printed retro reflection overhead cantilever gantry informatory sign boards and retro...

Southern Railway - Tamil Nadu

29521129 replacement of over aged cantilever with insulators in gpd gdr section ofchennai divisionreplacement of over aged cantilever with insulators in gpd gdr section of chennai division, ...

Chennai Petroleum Corporation Limited - Tamil Nadu

29107863 renovation works in administration block building and other areas renovation works in administration block building and other areas of cpcl cbr in nagapattinam , civil works , repair of existing plasters of varying thickness of 12mm to 20mm including cutting the patch in proper shape, raking out joints, preparing and plastering the surface of the walls complete including disposal of rubbish to the designated place within the refinery premises with cement mortar 1:4 ( 1 cement : 4 fine aggregate ) , providing injection type post construction water proofing to concrete structures such as roof slabs, sunken portions, intersection of chajja & masonry, liquid storage tanks, etc. by installing minimum 12 / 15mm dia pvc / aluminium / gi nozzles at suitable intervals and mechanically injecting single component hydrophobic water active flexible polyurethane of approved make at minimum pressure of 3 kg / sqm as per manufacturers recommendations. the rate shall include all materials, labor and operations and finishing, dismantling & assembling of false ceiling / under deck insulation works, if any, making temporary water pool over the leaky portion and removal after work, include the cost of providing fixing and cutting off nozzle projections grouting holes, etc. complete as per the instructions of engineer in charge. ( only consumed chemical in grouting work to be measured for payment ) , supplying, transporting, storing, fabricating & erecting in position bolted and / or welded structural steel works like angles, channels, beams, plates, pipes, tubes, etc. at all heights & levels and locations including all built up sections / compound sections made out of rolled sections and / or plates / bent plates in existing / new structural pipe supports, frames, etc., cutting to required size, straightening / bending, if required, edge preparation, cleaning, scrapping & welding of unsound joints in existing structural members, preheating, ( including sealing of box section with continuous welding ) finishing edges by grinding, fixing in line and level with temporary bracings, including providing staging, scaffoldings, & working platforms at all heights, and removal of same after erection, including preparing the surface for painting, surface cleaning, wire brushing, removal of mill scale, dust, rust, oil or grease, etc. complete along with providing paint system as follows: ( a ) applying inorganic zinc silicate coat 50 micron dft; ( b ) two coats of epoxy primer paint 50 micron dft each; ( c ) two coats of anti rust epoxy top coat paint 75 micron dft each as per manufacturers specifications and as directed by engineer in charge. note: one coat of zinc silicate and one coat of epoxy primer shall be applied on structural steel surfaces after manual cleaning prior to erection as per specifications & as directed by engineer in charge. supply of all materials in contractors scope. , dismantling of structural steel works ( bolted / riveted / welded ) of all descriptions ( taking all necessary safety precautions ) for all heights & depths above & below plinth level including supply of all tools & tackles, consumables, necessary scaffolding, etc. providing temporary bracings as required, cutting gusset plates, bolts, nuts, weldings, etc., stacking of serviceable materials at designated location / cpcl storage yard / scrap yard within the refinery premises as per direction of engineer in charge. , polishing of existing marble stone flooring including cost of labor, materials, tools and tackles, etc. , polishing of existing mosaic flooring including cost of labor, materials, tools and tackles, etc. , dismantling cc / rcc work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead 100 m, stacking serviceable materials separately including cutting reinforcement bars, scaffolding breaking into pieces all labor, tools supervision, safety precaution, etc. complete. , demolishing plain cement concrete in foundation and super structure including disposal of unserviceable material up to a initial lead of 100m as directed serviceable materials to stores including scaffolding, all labor, tools supervision, safety permits, safety precaution, etc. complete. , demolishing of brick work of any mortar in foundations or at super structures including disposal of unserviceable materials to the designated place within the refinery premises as directed and including breaking into pieces, all labor, tools, etc. complete. , dismantling pipe lines of up to 6 inch dia including gi, pvc, cpvc, cast iron, stone ware, etc. including of all tools and tackles and disposal outside housing complex , dismantling tile workin floors and roofs laid up to bed mortar of 20mm including disposal to the dumping ground within the housing complex premises as per instruction of engineer in charge , dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts, etc. complete and stacking the material at a yard within the refinery premises as per instruction of engineer in charge , earth work in excavation below ground level for all kinds of work in basement, foundations, tunnels including trenches, pavements, wall footings, cable trenches, pipesleepers, pits, general site grading, etc., in all types of soil except soft rock and hard rock for a depth up to 1.5mtr. including removal of vegetation, shrubsand debris, cutting and dressing of sides in slops, leveling, grading and ramming of bottoms, de watering from any source and keeping the surface dry till the completion of subsequent works and disposalor stacking of excavated material within a lead of 50mtr., as directed including providing temporary supports to existingservice lines like water pipes, sewerage, electric cables, etc., allcomplete, but excluding shoring and strutting. , providing and filling fine aggregate of quality in floor, foundation, etc. in layer of 15 cm thickness including, watering, ramming, consolidating, etc. complete. , back filling the available excavated earth in plinth, trenches, sides of foundations in depressed areas in layers not exceeding 20 cm depth consolidating each layer by ramming and watering up to 50 mt lead and lift up to 1.5 mt. , providing and laying pcc 1:4:8 nominal mix using 40mm and down graded coarse aggregate and using opc 53 grade / of approved make conforming to is for any thickness below foundations, pile cap, raft, grade slab, tank pads, dyke & fire walls, pipe sleepers & supports, walkway platform supports, trenches, pits, drains, fillings, sumps, chambers, etc. m including shuttering , tamping, ramming, vibrating, curing, etc. all in any shape, position, thickness and finishing the top surface rough or smooth as specified and directedall complete, as per drawings, specifications and as directed by engineer in charge. rate includes supply of cement. , providing and laying reinforced cement concrete 1:1.5:3 ( 1 part of cement, 1.5 part of fine aggregate and 3 part of stone aggregate 20 mm and down ) in foundation below footing floor and raft and trenches using stone aggregate including watering, curing ramming with vibrator if necessary all labor and material complete as per direction of engineer in charge, including cost of form work using opc 53 grade cement grade of approved make conforming to is. rate includes supply of cement. , supplying and placing in position high strength deformed steel bars reinforcement ( conforming to is:1786, grade fe500 ) , for rcc work, pile, including transporting the steel, straightening, cleaning, decoiling. cutting, bending to required shapes and lengths as per details, binding with contractors own 16 swg black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fan hooks, scaffolding, etc. for all heights and depths, etc., all complete as per specifications and directions of engineer in charge. , providing and constructing brickwork in 1:4 cement mortar ( 1 cement and 4sand ) with locally available best quality bricks for super structure in all heights with cement mortar including racking out joints, watering, curing, scaffolding, etc., complete. rate includes supply of opc 53 grade cement grade , providing 12mm thick plaster in cement mortar 1:4 ( 1 cement :4sand ) on walls / concrete surfaces including cleaning, hacking of concrete surfaces, scaffolding, finishing, curing, etc., for all heights. rate includes supply of opc 53 grade cement grade , providing fixing form work including centering, shuttering and strutting and propping in super structure upto staging of 4.5m wide so as to give a fair finish of r.f cement concrete work in column, beams, walls slabs, staircases, ( steps, waist slabs, landing, etc. ) lintel, sun shades, canopies, cantilevers, etc. for all heights including removal of the shuttering after the specified period is over and as directed by the engineer in charge complete with all materials, labor consumable, etc. ( form work shall be supplied by the contractor and shall remain the property of the contractor ) , providing and laying vitrified floor tiles of size above 60 x 60 cm anti skid type / gloss finish of make johnson / kajaria / somany / nitco in all colors and shades, laid on 20 mm thick cement mortar 1: 4 ( 1 cement : 4 sand ) including grouting the joints with white cement and matching pigments, etc., complete. rate includes supply of opc 53 grade cement grade , providing and fixing vitrified glazed wall tiles of make johnson / kajaria / somany / nitco in all colors, shades except burgundy, bottle green, black of size above 600 x 450 mm as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. rate includes supply of opc 53 grade cement grade , providing and fixing granite tiles of shade black galaxy / equivalent of thickness not less than 18 mm as selected by eic of approved make over 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 sand ) and nosing on both sides. rate includes supply of opc 53 grade cement grade , proving and fixing white counter top wash basin of size 615x415x150 mm of make jaguar ( model no. drs wht 3760 ) / toto / kohler along with necessary fittings namely tall body pillar cock ( johnson model no. ari 39005b ) , angle cock ( johnson model no. con 053kn ) , clamps, waste hose coupling, connector hose, bottle trap, etc. , providing and fixing white wall hung rimless wc with uf sift close slim seat cover along with all accessories dimensions 355x525x380 mm of make jaguar ( model no. drs wht 37953biufsm ) / toto / kohler along with necessary fittings namely concealed flush tank ( jcs wht 2400 ) , flush plate ( cp 2415 ) , two way bib cock ( ari 39041 ) , health faucet ( ald 573 ) , connector hose ( ald 803ab ) , etc. , providing and fixing white wall hung urinal of dimensions 375x320x620 mm of make jaguar ( model no. urs wht 13253o ) / toto / kohler along with necessary fittings namely concealed flush cock ( flv 1093n ) , etc. , supply and fixing of curved shaped urinal partition with frosted glass of dimensions h: 900 w: 450 th: 10mm of make jaguar ( model no. se chr 110uc450x ) or equivalent make of toto / kohler along with crome finish necessary clamps, etc. , supply and fixing of stainless steel anti cockroach anti foul bathroom kitchen floor drain popup drainer trap gutter jali, silver, medium , supply and installation ofss kitchen sink of 24 x 18 ( dimensions : 610x450mm bowl dimensions : 550x390x225mm ) with waste hose coupling, waste hose, sink cock of johnson ( model no. t2918c ) as per direction of engineer in charge , supply and fixing of single lever basin mixer without popup waste and 450mm long braided hoses of make jaguar ( model no. ari 39001b ) or equivalent make of toto / kohler along with necessary fittings labor, etc. , providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes ( exposed on wall ) , having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 2 dia , providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes ( exposed on wall ) , having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 1 dia , providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes ( concealed inside wall ) , having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 1 dia , providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes ( concealed inside wall ) , having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 3 / 4 dia , providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes ( concealed inside wall ) , having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 1 / 2 dia , providing and fixing on wall face unplasticised rigid pvc rain sewerage line pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion ( single socketed pipes ) with necessary fittings / accessories, etc. complete. rate inclusive of scaffolding. for pipes of 2 dia , providing and fixing on wall face unplasticised rigid pvc rain sewerage line pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion ( single socketed pipes ) with necessary fittings / accessories, etc. complete. rate inclusive of scaffolding. for pipes of 4 dia , transporting and disposing the surplus earth / debris generated after backfilling from construction activities, loading, unloading, as directed to designated place within refinery premises upto a lead of 3 kms. , trimming and pruning of trees by cutting off branches of trees using necessary tools & tackles, including collecting, stacking, loading / unloading, transporting and disposed inside the refinery premises to a distance of 3km with contractors own transport as per the directions of engineer in charge. item includes supply of all required labor, tools and tackles, etc.. ( a ) for trees of height above 5 m to 8 m. , trimming and pruning of trees by cutting off branches of trees using necessary tools & tackles, including collecting, stacking, loading / unloading, transporting and disposed inside the refinery premises to a distance of 3km with contractors own transport as per the directions of engineer in charge. item includes supply of all required labor, tools and tackles, etc.. ( b ) for trees of height above 8 m. , hiring of machineries on demand basis. the quoted rate is inclusive of charges towards mobilization, if any, hire charges, consumables fuel / oils / lubricants, operator crews costs, supervision, overhead & profit, safety permits, safety precaution, etc. complete. for continuous tracked tractor hydraulic excavator ( 3d ) with attachments such as a breaker, a grapple or an auger. , for tractor with trolley , for tipper lorry of capacity 8 10 cum , supply of unskilled class labour to carry out petty works not assessable for measurements / minor repair works, on day to day basis during the cpcl general shift hours ( 0730 1600 hours ) on all regular working days from monday to saturday. the rates shall include esi, pf, payroll cost and allowances, fringe benefits, overhead supervision, profits and hand tools. payment for part of the day will be made on prorata basis. , same as sl. no. 46 above, but for supply of semi skilled labour ( like stone cutter, office assistant ) , same as sl. no. 46 above, but for supply of skilled labour ( like mason, carpenter, plumber ) , painting works , providing & applying wall painting in exterior surfaces: surface preparation by water jetting and sander, supply and application of single coat of wall primer ( modified acrylic, water based alkali resistantprimer cum sealer with silicone additives ) and two coats of exterior emulsion ( water based, modified acrylic, exterior with silicon additives ) with a manufacturer indicated performance life of minimum 5 years. rate inclusive erection of scaffolding / movable safety harness like parapet anchor for all heights / depths, all tools, materials, labor, etc. , providing & applying wall painting in interior surfaces: surface preparation by sander, filling of cracks with putty, supply and application of two coats of interior emulsion ( water based, modified acrylic, exterior with silicon additives ) with a manufacturer indicated performance life of minimum 5 years. rate inclusive erection of scaffolding / movable safety harness like parapet anchor for all heights / depths, all tools, materials, labor, etc. , providing & applying wall primer in interior surfaces: supply and application of single coat of wall primer for interior surfaces ( modified acrylic, water based alkali resistantprimer cum sealer with silicone additives ) . rate inclusive erection of scaffolding / movable safety harness like parapet anchor for all heights / depths, all tools, materials, labor, etc. , providing & applying enamel painting for metal / woodensurface : surface preparation, supply and application of metal primer of zinc base / wood primer and two coats of synthetic gloss enamel paint. rate inclusive of movable safety harness for all heights / depths , providing & applying wall enamel painting : surface preparation by water jetting and sander, supply and application of single coat of wall primer ( modified acrylic, water based alkali resistantprimer cum sealer with silicone additives ) and two coats of synthetic enamel paint ( gloss enamel ) . rate inclusive of movable safety harness for all heights / depths , providing & applying wood finish coats: surface preparation using paper 180 and then using and paper 320 and wipe clean, supply and application of one coat of sealer base coat andtwo coats of acid curing solvent based 2 pack of wood finish at an interval of about 24 hours. sand lightly with and paper 320 between the two coats. rate inclusive of filler as required. rate inclusive erection of scaffolding / movable safety harness like parapet anchor for all heights / depths, all tools, materials, labor, etc. , providing & applying of lime wash: surface preparation by water jetting and sander, supply and application of two coats of lime wash as per manufacturer specification. rate inclusive of movable safety harness for all heights / depths , providing and applying wall putty: supply and application of water resistant white cement based on interior surface after thorough cleaning as per manufacturers specification of make jk / birla of max thickness 1.5 mm for all heights. rate inclusive erection of scaffolding / movable safety harness like parapet anchor for all heights / depths, all tools, materials, labor, etc. , carpentry works , providing and fixing false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of bwp type phenol formaldehyde synthetic resin bonded pressed particle board conforming to is: 3087 finished with a coat of aluminium primer on both sides & edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodized aluminium ( with 15 micron anodic coating ) t sections 35 x 15 x 1.5 mm size main runners and cross runners 23.5 x 19 x 1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. the frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia ms rod fixed to roof slab by means of ceiling cleats. the suspenders shall be placed 600 x 1200 centre to centre including fixing to the frame with cp brass screws and applying priming coat of zinc chromate yellow primer ( aluminium frame work shall be paid separately ) . , renewing glass panes, with glazing clips and special metals ash putty of approved make, and metal beading with screws ( cost of aluminium beading shall be paid separate under relevant items of work ) wherever necessary including removal of damaged old glass panes, if required, racking out old putty and disposal of unserviceable materials within refinery premises as directed by engineer in charge using wired glass panes of thickness 6 mm. , providing and fixing in position first quality non reflective type polyester sun control film of garware or equivalent approved make of 25 micron thickness including cleaning the door / ventilator panes, trimming the edges, etc. complete as per the instructions of engineer in charge. , providing and fixing anodized aluminium work ( anodized transparent or dyed to required shade according to is: 1868, minimum anodic coating of 15 micron ) for doors, windows, ventilators and partitions / false ceiling framework with extruded built up standard tubular / appropriate z sections / tee / angle sections and other sections of approved make, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required pvc / neoprene felt, etc. aluminium sections shall be smooth rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing and paneling to be paid for separately ) ; for fixed portion, minimum anodic coating of grade ac 15 shall be provided , providing and fixing is : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws, etc. complete. , providing and fixing beveled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with cp brass screws and washers complete. , providing and fixing bright finished brass 100mm mortise latch and lock isi marked with six levers and a pair of anodized ( anodic coating not less than grade ac 10 as per is:1868 ) aluminium lever handles with necessary screws, etc. complete , providing and fixing stainless steel door handles of 12 long grade 304 of approved design , supply and fixing of plain customized polyester blend corded blackout roller blinds of minimum thickness 1.5 mm ( heat reflective with complete water repellent with cord tensioner ) for windows as per the direction of eic including all fixtures, tools, tackles, etc. , supply and fixing of vertical blinds / curtains of minimum thickness 1.5 mm for windows as per the direction of eic including all fixtures, tools, tackles, etc. , supply and installation of table glass of 8mm thick of make saint gobain or equivalent , providing and fixing of designer frosted glass stickers of approved design by eic , providing and fixing false ceiling using ( acp ) 4 mm thick ( 0.5 mm thick aluminium sheet on top & bottom sandwiched with 3 mm thick core material confirming to bs 1467 in combination with approved solidand metallic color panels laminated sandwiched composite panel to a grid made out of anodized aluminium ( with 15 micron anodic coating ) t sections 35 x 15 x 1.5 mm size main runners and cross runners 23.5 x 19 x 1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. the frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia ms rod fixed to roof slab by means of ceiling cleats. the suspenders shall be placed 600 x 1200 centre to centre including fixing to the frame with cp brass screws and applying priming coat of zinc chromate yellow primer. rates are inclusive of scaffolding ( aluminium frame work shall be paid separately ) , providing and fixing to existing door frames 30 mm thick glass fibre reinforced plastic ( frp ) paneled door shutter of required color and approved brand and manufacture, made with fire retardant grade unsaturated polyester resin, molded to 3 mm thick frp laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick frp laminate for panels conforming to is: 14856, including fixing to frames. , providing and fixing fiber glass reinforced plastic ( frp ) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. the laminate shall be molded with fire resistant grade unsaturated polyester resin and chopped mat . door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides. m.s. stay shall be provided at the bottom to steady the frame. , supply and fixing of stainless steel net made up of 304 f grade alloy for door and windows, supported by removable aluminum frames supported by pins made from sturdy virgin aluminum alloys coated with “asanable powder coating”. , supply works , supply and fixing of rubber anti slip door mat inclusive of all materials, labor, tools, tackles, removal of exiting wall paper, if required, etc. , supply and fixing of self adhesive type textured vinyl pvc coated 3d wallpaper inclusive of all materials, labor, tools, tackles, removal of exiting wall paper, if required, etc. , supply and fixing of sign boards / name boards in pvc foam board plastic material of 3 mm thickness on walls / metal boards, etc. inclusive of all materials, labor, tools, tackles, removal of exiting boards, if required, etc. , supply and fixing of automatic puremist hand sanitizer dispenser of make livpure / jaguar / kent , supply and fixing of wall mounted glass manual soap dispenser jaquaracn 1135n or equivalent make of ess / hindware , supply and fixing black and brown shoe polish / shiner machine of make dynamic or equivalent , supply and fixing of contactless hands free foot operated door opener in ss304 of make godrej or equivalent , supply and fixing of kimberly clark aquarius slim hard roll towel dispenser 69530 with scott hard roll paper towels 12388 ( hrt dispenser & paper towel roll combo ) or equivalent , supply and fixing of towel rail 600mm long stainless steel jaguar acn 1111sm or equivalent make of kohler / toto , supply and fixing of towel ring round with round flange jaquar acn 1121bn or equivalent make of kohler / toto , supply and fixing of robe hook jaquar acn 1191n or equivalent make of kohler / toto , supply and fixing of toilet roll holder acn 1151n or equivalent make of kohler / toto , supply and fixing of luminous vento deluxe 150 mm exhaust fan for kitchen, bathroom and office ( cut out size sq 192 x 192 mm, white ) or equivalent of make usha / havells / orpat , supply and fixing of hand dryer of abs plastic body jaguar model hdr wht m04a or equivalent of ess / hindware / toto , supply and fixing of upvc white color windows with 4mm glass and necessary accessories as per the directions of eic including necessary labor, tools, tackles, etc. , electrical works , supply and fixing of plastic / metal boxes of following sizes with all accessories including necessary base frame plates / mounting plates, etc., suitable for fixing decorative switches of type roma or equivalent make of havells / siemens / anchor / l&t as per direction of the engineer in charge. , 1 or 2 module box , 6 module box , 12 module box , supply, fixing and connection of modular type of anchor make ( roma ) or approved equivalent make switch, socket bell push, etc. in havells / siemens / anchor / l&t, complete with labor and materials as per direction of the engineer in charge. , 10 a, 1way switch , 20 a, 1 way switch , 3 pins 5 / 6 amps socket with isi mark , 3 pins 10 / 20a, heavy duty unit socket outlet with isi mark , mcbs: the scope of work includes supplying and fixing of 5 amps. to 32 amps, 240 / 415 volts, 50hz, 10ka miniature circuit breaker ( suitable for motor, lighting and other inductive loads of following poles in the existing mcb db with required rails / fasteners for fixing, including connections, testing and commissioning, etc. as required, all complete with labor and materials, as per directions of engineer in charge. note: isi marked mcbs as per approved vendor , up to 32a, single pole , pvc conduits: the scope of work includes supply & laying of following size of pvc conduit along with the accessories to be used for installation in surface / concealed as required, as per the directions of engineer in charge. note: only isi marked conduits shall be used. , 20 mm , 25 mm , supply of pvc wires: the scope of work includes supply of following size of pvc insulated, copper conductor for laying in the existing surface / recessed, pvc / steel conduit / pvc casing and capping as required, as per the directions of engineer in charge. note: only isi marked cables shall be used. , 1.5 sq.mm , 2.5 sq.mm , laying of pvc wires: the scope of work includes drawing / laying of following size of pvc insulated, copper conductor for laying in the existing surface / recessed, pvc / steel conduit / pvc casing and capping as required, as per the directions of engineer in charge. , 3 x 1.5 sq.mm , 3 x 2.5 sq.mm , supply and fixing of 6w led down light mountable on false ceiling warm white colour , supply and fixing of 6w led curved mirror light for mirror lights warm white colour , gardening works , supply of vermicompost ( 50kg per bag ) , supply of n:p:k ( 15:15:15 ) , fertilizer ( 50kg per bag ) , supply of garden earth as per direction of eic , supply of mexican grass turf , supply of tree saplings ( 3 4 feet height ) , supply of flowering plants / decorative plants / hedge plants ( 1 2 feet height ) , supply of flower pots ( cement ) circular shape medium size ( min.12 dia. ) ...

Chennai Petroleum Corporation Limited - Tamil Nadu

29077670 renovation works including civil and electrical works in c type quarters of cpcl cbr refinery housing complex, nagapatinnam renovation works including civil and electrical works in c type quarters of cpcl cbr refinery housing complex, nagapatinnam , civil works , dismantling cc / rcc work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead 100 m, stacking serviceable materials separately including cutting reinforcement bars, scaffolding breaking into pieces all labor, tools supervision, safety precaution, etc. complete. , demolishing plain cement concrete in foundation and super structure including disposal of unserviceable material up to a initial lead of 100m as directed serviceable materials to stores including scaffolding, all labor, tools supervision, safety permits, safety precaution, etc. complete. , demolishing of brick work of any mortar in foundations or at super structures including disposal of unserviceable materials to the designated place within the refinery premises as directed andincluding breaking into pieces, all labor, tools, etc. complete. , dismantling pipe lines of up to 6 inch dia including gi, pvc, cpvc, cast iron, stone ware, etc. including of all tools and tackles and disposal outside housing complex , dismantling tile work in floors and roofs laid up to bed mortar of 20mm including disposal to the dumping ground within the housing complex premises as per instruction of engineer in charge , dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc. complete and stacking the material at a yard within the refinery premises as per instruction of engineer in charge , providing & applying wall painting in interior surfaces:surface preparation by sander, filling of holes / cracks with putty and primer, if required, supply and application of two coats of interior emulsion (asian paints royale or equivalent of nippon / nerolac/dulux/berger) in all heights. rate includes erection of scaffolding / movable scaffoldings, all tools, materials and labor, covering all important structures with sheets and tapes andcleaning total area after surface preparation, running loose materials, etc. , providing & applying wall putty:supply and application of water resistant white cement based putty on interior surface after thorough cleaning as per manufacturer specification of make birla / jk of maximum thickness 1.5 mm in all heights. rate includes erection of scaffolding / movable safety harness like parapet anchor, all tools, materials and labor, etc. , earth work in excavation below ground level for all kinds of work in basement, foundations, tunnels includingtrenches, pavements, wall footings, cable trenches, pipesleepers, pits, general site grading, etc., in all types of soil except soft rock and hard rock for a depth up to 1.5mtr. including removal of vegetation, shrubs and debris, cutting and dressing of sides in slops, leveling, grading and ramming of bottoms, de watering from any source and keeping the surface dry till the completion of subsequent works and disposalor stacking of excavated material within a lead of 50mtr., as directed including providing temporary supports to existingservice lines like water pipes, sewerage, electric cables, etc., allcomplete, but excluding shoring and strutting. , providing and filling fine aggregate of quality in floor, foundation, etc. in layer of 15 cm thickness including, watering, ramming, consolidating, etc. complete. , back filling the available excavated earth in plinth, trenches, sides of foundations in depressed areas in layers not exceeding 20 cm depth consolidating each layer by ramming and watering up to 50 mt lead and lift up to 1.5 mt. , providing and laying pcc 1:4:8 nominal mix using 40mm and down graded coarse aggregate and using opc 53 grade / of approved make conforming to is for any thickness below foundations, pile cap, raft, grade slab, tank pads, dyke & fire walls, pipe sleepers & supports, walkway platform supports, trenches, pits, drains, fillings, sumps, chambers, etc. including shuttering, tamping, ramming, vibrating, curing, etc. all in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete, as per drawings, specifications and as directed by engineer in charge. rate includes supply of cement. , providing and laying reinforced cement concrete 1:1.5:3 (1 part of cement, 1.5 part of fine aggregate and 3 part of stone aggregate 20 mm and down) in foundation below footing floor and raft and trenches using stone aggregate including watering, curing ramming with vibrator if necessary all labor and material complete as per direction of engineer in charge, including cost of form work, using opc 53 grade cement grade of approved make conforming to is. rate includes supply of cement. , supplying and placing in position high strength deformed steel bars reinforcement (conforming to is:1786, grade fe500), for rcc work, pile, including transporting the steel, straightening, cleaning, decoiling. cutting, bending to required shapes and lengths as per details, binding with contractors own 16 swg black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fan hooks, scaffolding, etc. for all heights and depths, etc., all complete as per specifications and directions of engineer in charge. , providing and constructing brickwork in 1:4 cement mortar (1 cement and 4sand) with locally available best quality bricks for super structure in all heights with cement mortar including racking out joints, watering, curing, scaffolding, etc., complete. rate includes supply of opc 53 grade cement grade , providing 12mm thick plaster in cement mortar 1:4 (1 cement :4sand) on walls / concrete surfaces including cleaning, hacking of concrete surfaces, scaffolding, finishing, curing, etc., for all heights. rate includes supply of opc 53 grade cement grade , providing fixing form work including centering, shuttering and strutting and propping in super structure upto staging of 4.5m wide so as to give a fair finish of r.f cement concrete work in column, beams, walls slabs, staircases, (steps, waist slabs, landing, etc.) lintel, sun shades, canopies, cantilevers, etc. for all heights including removal of the shuttering after the specified period is over and as directed by the engineer in charge complete with all materials, labor consumable, etc. (form work shall be supplied by the contractor and shall remain the property of the contractor) , providing and laying ceramic floor tiles of size above 30 x 30 cm anti skid type / gloss finish of make johnson / kajaria / somany / nitco in all colors and shades, laid on 20 mm thick cement mortar 1: 4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments, etc., complete. rate includes supply of opc 53 grade cement grade , providing and fixing vitrified glazed wall tiles of make johnson / kajaria / somany / nitcoin all colors, shades except burgundy, bottle green, black of size upto 600 x 450 mm as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. rate includes supply of opc 53 grade cement grade , providing and fixing granite tiles of shade black galaxy / equivalent of thickness not less than 18 mm as selected by eic of approved make over 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) and nosing on both sides. rate includes supply of opc 53 grade cement grade , providing and fixing to existing door frames 30 mm thick glass fibre reinforced plastic (frp) paneled door shutter of required color and approved brand and manufacture, made with fire retardant grade unsaturated polyester resin, molded to 3 mm thick frp laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick frp laminate for panels conforming to is: 14856, including fixing to frames. rate inclusive of door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. the laminate shall be molded with fire resistant grade unsaturated polyester resin and chopped mat. door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides. m.s. stay shall be provided at the bottom to steady the frame. , supply and fixing of stainless steel net made up of 304 f grade alloy for door and windows, supported by removable aluminum frames supported by pins made from sturdy virgin aluminum alloys coated with “asanable powder coating”. , providing & applying enamel painting in wooden / metal surfaces:surface preparation by sand paper, supply and application of single coat of wall primer (modified acrylic, water based alkali resistantprimer cum sealer with silicone additives), one coat of putty for wooden surface and two coats of enamel (gloss enamel). for metal / wooden surface suitable metal primer of zinc base / wood primer has to be used in all heights.rate includes erection of scaffolding / movable safety harness like parapet anchor, all tools, materials and labor, etc. , proving and fixing white vitreous china wash basin of size 355x355x145mm of make johnson (model no. p6912pw) / hindware / parryware along with necessary fittings namely tall body pillar cock(johnson model no. t1302c), angle cock (johnson model no. t3910c), clamps, waste hose coupling, connector hose, bottle trap, etc. , providing and fixing white vitreous china pedestal type water closet (european type / wash down type) water closet pan of dimensions 580x360x395mm make johnson (model no. p0448pw) / hindware / parryware along with necessary fittings namely flush tank with 2 in 1 angle cock johnson (model no. t1812cc), seat cover, connector hose, health faucet johnson (model no. s0030c), s/p trap. , supply and fixing of overhead showers johnson (model no. s1816c) with arm johnson (model no.s1821c) or equivalent as per eic for bathrooms , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (exposed on wall), having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 1 dia , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (concealed inside wall), having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 3/4 dia , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (concealed inside wall), having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing for non embedded works. this includes jointing of pipes & fittings with on step cpvc solvent cement and testing of joints, scaffolding complete as per direction of engineer in charge for pipes of 1/2 dia , providing and fixing on wall face unplasticised rigid pvc rain sewerage line pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion (single socketed pipes) with necessary fittings / accessories, etc. complete. rate inclusive of scaffolding.for pipes of 2 dia , providing and fixing on wall face unplasticised rigid pvc rain sewerage line pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion (single socketed pipes) with necessary fittings / accessories, etc. complete. rate inclusive of scaffolding.for pipes of 4 dia , supply and fixing of stainless steel anti cockroach anti foul bathroom kitchen floor drain popup drainer trap gutter jali, silver, medium , supply and installation of ss kitchen sink of 24 x 18 (dimensions : 610x450mm bowl dimensions : 550x390x225mm) with waste hose coupling, waste hose, sink cock ofjohnson (model no. t2918c) as per direction of engineer in charge , providing and injecting chemical emulsion for post constructional anti termite treatment using chemical imidacloprid 30.5% sc at 2.1ml per liter of water covering entire building internal as well as external wall. the quoted rate shall be inclusive of all tools, tackles, labors, chemical/material cost, etc. complete. , supply and fixing of upvc white color windows with 4mm glass and necessary accessories as per the directions of eic including necessary labor, tools, tackles, etc. , electrical works , supply and fixing of plastic/metal boxes of following sizes with all accessories including necessary base frame plates/ mounting plates, etc., suitable for fixing decorative switches of type roma or equivalent make of havells/siemens/anchor/l&t as per direction of the engineer in charge. , 1 or 2 module box , 3 module box , 6 module box , 8 module box , 12 module box , supply, fixing and connection of modular type of anchor make (roma) or approved equivalent make switch, socket bell push, etc. in havells / siemens / anchor / l&t, complete with labor and materials as per direction of the engineer in charge. , 10 a, 1way switch , 20 a, 1 way switch , 3 pins 5 / 6 amps socket with isi mark , 3 pins 10/20a, heavy duty unit socket outlet with isi mark , single module dimmer / fan regulator , ceiling fan:supply & installation of ceiling fan of 1200 mm sweep ceiling fan of bajaj / crompton greaves / khaitan / usha / havells make and regulator, including wiring the down rod of standard length (up to 30 cm) with 1.5 sqmm, pvc insulated, copper conductor, single core cable, etc., as required, as per the specifications of this tender and directions of engineer in charge. , 1200 mm sweep , exhaust fan:the scope of work includes supply of fresh air fan / exhaust fan of almonard / bajaj / crompton greaves / khaitan / usha / havells make of below mentioned sweep and installation in existing frames, testing and commissioning of fresh air fan/exhaust fan, including lead in wires and accessories as required, all complete with labor and material, with necessary fixing accessories, louvers wherever required, as per the specifications of this tender and directions of engineer in charge. , 300 mm sweep , 450 mm sweep, heavy duty industrial type , outdoor lighting:wp well glass light fixtures: the scope of work includes supply, installation, testing and commissioning of 40w wp well glass led lights of approved make suitable for mounting with platform / poles, as per directions of engineer in charge. , socket outlet:the scope of work includes supply and fixing of 20 amps., 240 volts, spn industrial type, socket & outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps, g series, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, including connections, testing and commissioning, etc. as required, all complete with labor and materials, as per directions of engineer in charge. note: isi marked sockets of approved make shall be used. , mcbs:the scope of work includes supplying and fixing of 5 amps. to 32 amps,240/ 415 volts, 50hz, 10ka miniature circuit breaker (suitable for motor, lighting and other inductive loads of following poles in the existing mcb db with required rails/fasteners for fixing, including connections, testing and commissioning, etc. as required, all complete with labor and materials, as per directions of engineer in charge.note: isi marked mcbs as per approved vendor , up to 32a, single pole , up to 63a, 4p/tpn , rccb:the scope of work includes supplying and fixing following rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (rccb), isi marked, having a sensitivity current indicated miliamperes in the existing mcb db with required rails / fasteners for fixing, including connections, testing and commissioning, etc. as required, all complete with labor and materials, directions of engineer in charge. note: isi marked rccb shall be used. , up to 32 a, 30 ma, 2p , pvc conduits:the scope of work includes supply & laying of following size of pvc conduit along with the accessories to be used for installation in surface/concealed as required, as per the directions of engineer in charge. note: only isi marked conduits shall be used. , 20 mm , 25 mm , pvc casing / caping:the scope of work includes supply & laying of following size of pvc casing andcaping on surface as required, as per the directions of engineer in charge. note: only isi marked caping and casing shall be used. , 25 mm x 10 mm , supply of pvc wires:the scope of work includes supply of following size of pvc insulated, copper conductor for laying in the existing surface / recessed, pvc /steel conduit / pvc casing and capping as required, as per the directions of engineer in charge. note: only isi marked cables shall be used. , 1.5 sq.mm , 2.5 sq.mm , laying of pvc wires:the scope of work includes drawing/laying of following size of pvc insulated, copper conductor for laying in the existing surface /recessed, pvc / steel conduit / pvc casing and capping as required, as per the directions of engineer in charge. , 3 x 1.5 sq.mm , 3 x 2.5 sq.mm , tube light fitting:the scope of work includes supply and fixing of led 18 w 6500 k1, decorative slim linear led batten fittings with bulb of havells catalogue or equivalent, including civil work (if any) required for installation, all complete with labour and materials, as per the directions of engineer in charge , led down lights:the scope of work includes supply & fixing of recess mounted, compact vertical, round shaped 10w led 6000k down lighter with removable driver of havells make or equivalent suitable for low ceiling heights, all complete with labor and materials, as per the directions of engineer in charge....

Electronics Corporation Of India Limited - Tamil Nadu

29005470 tender for civil, electrical and ac works for construction of ware house and site office building at kknpp 3 and 4 sites kudankulam tamilnadu 1 1 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 2 2.1 earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer in charge. all kinds of soil 3 3.1 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone iii) : 8 graded stone aggregate 40 mm nominal size) 4 3.2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone iii) : 4 graded stone aggregate 20 mm nominal size). 5 3.3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone iii) : 6 graded stone aggregate 20 mm nominal size). 6 4 providing contraction / expansion joints in cement concrete floor by concrete cutting machine (up to 6mm to 10mm width & 40mm to 50mm depth) etc., complete and as directed by engineer in charge. 7 5.1 providing and laying in position bitumen hot sealing compound for expansion joints etc. using grade a sealing compound. note: please read the unit as per cm depth per cm width per m length 8 6 providing and laying dry rubble soling including filling interstices with morrum etc., complete and as directed by engineer in charge. 9 7.1 random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) 10 8 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 11 9.1 supplying, filling and consolidating at site good earth 12 10.1 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone iii): 3 graded stone aggregate 20 mm nominal size). 13 11 reinforced cement concrete work in beams, suspended floors, roofs with slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone iii) : 3 graded stone aggregate 20 mm nominal size). 14 12.1 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo mechanically treated bars of grade fe 500d or more. 15 13.1 centering and shuttering including strutting, propping etc. and removal of form for all heights : foundations, footings, bases of columns, etc. for mass concrete 16 13.2 centering and shuttering including strutting, propping etc. and removal of form for all heights : lintels, beams, plinth beams, girders, bressumers and cantilevers 17 13.3 centering and shuttering including strutting, propping etc. and removal of form for all heights : weather shade, chajjas, corbels etc., including edges 18 13.4 centering and shuttering including strutting, propping etc. and removal of form for all heights : walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 19 13.5 centering and shuttering including strutting, propping etc. and removal of form for all heights : suspended floors, roofs, landings, balconies and access platform 20 14.1 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) 21 15.1 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1:4 (1 cement :4 coarse sand) 22 16 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry 23 17 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 24 18.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 25 19.1 cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster 26 20.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 27 21 neat cement punning. 28 22.1 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 29 23.1 finishing walls with acrylic smooth exterior paint of required shade : new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 30 24.1.1 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing, paneling and dash fasteners to be paid for separately) : for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) 31 24.2.1 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing, paneling and dash fasteners to be paid for separately) : for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required (fittings shall be paid for separately) powder coated aluminium (minimum thickness of powder coating 50 micron) 32 25 providing and fixing powder coated aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. (only weight of grill to be measured for payment). 33 26.1 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paid in basic item): with float glass panes of 4.0 mm thickness 34 26.2 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paid in basic item): with float glass panes of 5.50 mm thickness 35 27 extra for etching on float glass panes etc., complete and as directed by engineer in charge. 36 28.1 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge. pre laminated particle board with decorative lamination on both sides 37 29 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (with brand logo with is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. make: godrej / everite / equivalent. 38 30.1 providing and fixing aluminium round shape handle of outer dia 100 mm with ss screws etc. complete as per direction of engineer in charge powder coated minimum thickness 50 micron aluminium 39 31.1 providing and fixing powder coated aluminium tower bolts (minimum thickness of powder coating 50 micron) isi marked, to required colour or shade, with necessary screws etc. complete : 200x10 mm 40 32 providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 41 33.1 supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 part 1 and m.s. top cover of required thickness for rolling shutters 80x1.25 mm m.s. laths with 1.25 mm thick top cover 42 34 providing and fixing ball bearing for rolling shutters. 43 35 providing and fixing of 1.5 hp motor for operating rolling shutter including gear box, wiring, remote controlled and necessary accessories etc., complete and as directed by engineer in charge. note: any missing items not mentioned but required for the completion of the job and are essential to be taken into account without any additional cost to the department. 44 36 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 45 37.1 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes 46 38.1 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete 47 38.2 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 48 39 providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 49 40 providing and fixing bolts including nuts and washers complete. 50 41 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 51 42.1 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling or self tapping screws complete : ridges plain 500 to 600mm 52 42.2 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling or self tapping screws complete : flashings/ aprons.( upto 600 mm) 53 42.3 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling or self tapping screws complete : gutter .(600 mm over all girth) 54 43.1 supply and application of anti corrosion primer nitozinc primer of fosroc or equivalent product approved by the engineer in charge as per manufacturer s recommendation for structural steel or exposed reinforcement including manpower, brushes, scaffolding arrangements etc., complete and as directed by engineer in charge. two or more coats on new work 55 44.1 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work 56 45 labour charges for vdf vibrator for finishing the cement concrete floor etc., complete and as directed by engineer in charge. 57 46 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 58 47 providing and fixing 2mm polycarbonate sheet in roof for ventilation, the sheet shall be fixed using self drilling / self tapping screws of size 5.5x55mm with epdm seal up to any pitch in horizontal / verticle or curved surfaces and including cutting to size and shape wherever required etc., complete and as directed by engineer in charge. 59 48 providing and fixing imported turbine exhaust of 500 mm dia with light weight aluminium construction, dupont delrin casin with teflon protective top and bottom bearings and washers and fitted with grade 200 type 316 stainless balls designed for kudankulam wind speed, including all necessary fixtures, constructive washers etc., soaker flange to required profile with standard bolts, nuts etc., with the manufacturing guarantee and it should be watertight etc., complete and as directed by engineer in charge. 60 49 providing and fixing of daiken/armstrong mineral fibre false ceiling with hot dipped galvanised steel grid work, surface chemically cleaned capping perfectly pre finished in backed polyster paint, main tees of size 33x24x0.5mm thick at every 1.2m center to center perimeter with l angle 24x24x0.5mm thick to form a grid of size 600x600mm and suspending the grid from rcc roof using 12 guage gi wire and rawl plug at every 1200mm intervals wherever required and laying daiken/armstrong mineral fibre acoustic ceiling tiles pattern of size 600x600x14mm over the formed grid etc., complete and as directed by engineer in charge. note: false ceiling tiles not layed at the place of electrical fittings should be handed over to department (ecil). 61 50.1 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm 62 51.1 providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. size of tile 600x600 mm 63 52 supply and fixing of vertical venetian blinds 4 width as per user s requirement with necessary accessories and approved colour etc., complete and as directed by engineer in charge. 64 53.1 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. made of g.i. wire of dia 4 mm 65 54 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres 66 55 supply and installation of ms fabricated portable security cabin of size 1.80x1.80x2.40 m with necessary electrical fixtures, windows, door and including transport charges etc., complete and as directed by engineer in charge. note: technical specifications are enclosed. you are requested to quote as per the detailed technical specifications. 67 56 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 68 57 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. 69 58.1 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes with thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc 25 mm nominal outer dia pipes 70 58.2 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, with thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc 15 mm nominal outer dia pipes 71 59.1.1 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, with thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 25 mm nominal outer dia pipes 72 59.1.2 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, with thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 40 mm nominal outer dia pipes 73 60.1 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore 74 60.2 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 40 mm nominal bore 75 61.1.1 providing and fixing gun metal non return valve of approved quality (screwed end) : 25 mm nominal bore horizontal 76 61.1.2 providing and fixing gun metal non return valve of approved quality (screwed end) : 40 mm nominal bore horizontal 77 62.1 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : 25 mm nominal bore 78 63.1 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests 79 64.1 providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid 80 65.1 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required single half stall urinal with 5 litre p.v.c. automatic flushing cistern 81 66 providing and fixing white vitreous urinal divisions of approved quality and colour etc., complete and as directed by engineer in charge. 82 67.1 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap 83 68 providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 84 69.1.1 providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is: 13983 with c.i. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : kitchen sink with drain board 510x1040 mm bowl depth 250 mm 85 70.1.1 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. flexible pipe 32 mm dia 86 71.1 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore 87 72.1 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 15mm nominal bore 88 73 providing and fixing cp brass two in one tap of 15mm nominal bore etc., complete and as directed by engineer in charge. make: hindware / jaguar / cera 89 74 providing and fixing health faucet with 1.0 metre extendable metal tube and holder etc., complete and as directed by engineer in charge. make: jaguar / hindware. 90 75 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 91 76.1 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length 92 77.1 providing and fixing cp brass, push cock for urinal of approved quality. 15 mm nominal bore 93 78 providing and fixing pvc nahani traps including cp jali of approved quality etc., complete and as directed by engineer in charge. 94 79.1 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 40 mm diameter 95 79.2 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 75 mm diameter 96 79.3 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110 mm diameter 97 80.1.1 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 75x75x75 mm 98 80.1.2 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 110x110x110 mm 99 80.2.1 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee without door 75x75x75 mm 100 80.2.2 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee without door 110x110x110 mm 101 80.3.1 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. bend 87.5degree 75 mm bend 102 80.3.2 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. bend 87.5 110 mm bend 103 80.4.1 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. shoe (plain) 75 mm shoe 104 80.4.2 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. shoe (plain) 110 mm shoe 105 81.1.1 providing and fixing square mouth s.w. gully trap class sp 1 complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size p type with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 106 82.1 providing, laying and jointing glazed stoneware pipes class sp 1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 107 83.1 providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of s.w. pipes including bed concrete as per standard design : 150 mm diameter s.w. pipe 108 84.1.1 constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design 0.91 m deep with sfrc cover and frame (heavy duty, hd20 grade designation) 560 mm internal diameter conforming to i.s. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 109 85 providing and fixing wpc (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm, door shutter of thickness 25mm including s.s pressed butt hinges of required size etc., complete and as directed by engineer in charge. 110 86 providing and fixing ventilators made with upvc (unplasticised polyvinyl chloride) with suitable sections for frames and necessary fixtures, fastners etc., including 5mm thick float glass for louvers with necessary arrangements and filling the gap in between upvc frame & adjacent rcc/brick work by providing weather silicon sealant etc., complete and as directed by engineer in charge. 111 87.1 providing and fixing aluminium sliding door bolts, isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 112 88.1 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 113 89.1 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm 114 90 providing and laying of brick bat concreting 1:5:10 (1 cement:1 coarse sand:10 brick bats) for toilet flooring with water proofing treatment etc., complete and as directed by engineer in charge. 115 91.1 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 116 92.1 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. circular tank 117 93 providing and fixing vent cowl size of 110mm dia etc., complete and as directed by engineer in charge. 118 94 providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per is : 10910, on 12 mm dia steel bar conforming to is: 1786, with minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs with 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and with manufacture s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 119 95 providing and fixing 760x760 mm (outer) 2.5 mm thick gi manhole colver including frame, ensure after fixing of manhole cover including frame opening should be 600mmx600mm etc., complete and as directed by engineer in charge. 120 e1.1 supply and laying of following 1100v grade xlpe insulated pvc sheathed armoured heavy duty al. cables of approved make conforming to is 7098 (part i) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from lt panel / db panel to required loads including supply of all required fasteners and civil works etc., complete. 3.5 core 150 sq.mm armoured al. cable. make: finolex / kei / universal / l&t 121 e1.2 supply and laying of following 1100v grade xlpe insulated pvc sheathed armoured heavy duty al. cables of approved make conforming to is 7098 (part i) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from lt panel / db panel to required loads including supply of all required fasteners and civil works etc., complete. 3.5 core 70 sq.mm armoured al. cable. make: finolex / kei / universal / l&t 122 e1.3 supply and laying of following 1100v grade xlpe insulated pvc sheathed armoured heavy duty al. cables of approved make conforming to is 7098 (part i) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from lt panel / db panel to required loads including supply of all required fasteners and civil works etc., complete. 3.5 core 50 sq.mm armoured al. cable. make: finolex / kei / universal / l&t 123 e1.4 supply and laying of following 1100v grade xlpe insulated pvc sheathed armoured heavy duty al. cables of approved make conforming to is 7098 (part i) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from lt panel / db panel to required loads including supply of all required fasteners and civil works etc., complete. 3.5 core 25 sq.mm armoured al. cable. make: finolex / kei / universal / l&t 124 e1.5 supply and laying of following 1100v grade xlpe insulated pvc sheathed armoured heavy duty al. cables of approved make conforming to is 7098 (part i) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from lt panel / db panel to required loads including supply of all required fasteners and civil works etc., complete. 4 core 10 sq.mm armoured al. cable. make: finolex / kei / universal / l&t 125 e2.1 jointing the above mentioned cable with suitable terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in db / lt panel for incoming & outing of cable with earthing of glands etc., complete. 3.5 core 150 sq.mm armoured al. cable. make: raychem / denson / hmi 126 e2.2 jointing the above mentioned cable with suitable terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in db / lt panel for incoming & outing of cable with earthing of glands etc., complete. 3.5 core 70 sq.mm armoured al. cable. make: raychem / denson / hmi 127 e2.3 jointing the above mentioned cable with suitable terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in db / lt panel for incoming & outing of cable with earthing of glands etc., complete. 3.5 core 50 sq.mm armoured al. cable. make: raychem / denson / hmi 128 e2.4 jointing the above mentioned cable with suitable terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in db / lt panel for incoming & outing of cable with earthing of glands etc., complete. 3.5 core 25 sq.mm armoured al. cable. make: raychem / denson / hmi 129 e2.5 jointing the above mentioned cable with suitable terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in db / lt panel for incoming & outing of cable with earthing of glands etc., complete. 4 core 10 sq.mm armoured al. cable. make: raychem / denson / hmi 130 e3 supply, installation, testing and commissioning of cubical wall mounted / floor mounted enclosure box for suitable to fixing of following distribution boards as per the sld, made out of 2 mm crca sheet steel, pretreated with 7 tank process and painting with epoxy powder coated of approved shade. bottom/top entry for all cables with suitable gland plates of required sizes, aluminium bus bars @ 0.8a/sq.mm rating and neutral shall have the half rating of phase and comprising of following complete as per is earthing of panel and switches etc. incomings: 400a, mccb with microprocessor based over current and earth fault relay protection 01 no. 1) digital multifunction meter with rs485 comm 1n0. suitable cts for above mccb (metering) and 3phase indication lamps. outgoings: a) 160a, mccb with microprocessor based over current relay protection 02nos. b)100a, mccb with microprocessor based over current relay protection 04nos. make: schneider / l&t / siemens / abb 131 e4.1 supply and installation of sheet steel flush mounted double door type three phase vertical bus bar mccb / vtpn distribution board with phase and neutral to install on wall / column including cable end boxes, ms angular frame work with necessary accessories, internal wiring, earthing, painting, numbering, and minor civil works etc., complete. 160a, 12 way tpn dpx mccb db (cat no: 5077 48) make: legrand / l&t / siemens / schneider 132 e4.2 supply and installation of sheet steel flush mounted double door type three phase vertical bus bar mccb / vtpn distribution board with phase and neutral to install on wall / column including cable end boxes, ms angular frame work with necessary accessories, internal wiring, earthing, painting, numbering, and minor civil works etc., complete. 8 way vtpn db (cat no: 5077 27) make: legrand / l&t / siemens / schneider 133 e4.3 supply and installation of sheet steel flush mounted double door type three phase vertical bus bar mccb / vtpn distribution board with phase and neutral to install on wall / column including cable end boxes, ms angular frame work with necessary accessories, internal wiring, earthing, painting, numbering, and minor civil works etc., complete. 12 way spn db (cat no: 5076 11) make: legrand / l&t / siemens / schneider 134 e5.1 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 160a dpxmccb (cat no: 4200 97) make: legrand / siemens / schneider 135 e5.2 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 160a elm (cat no: 4201 17) make: legrand / siemens / schneider 136 e5.3 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 63a fpmcb (cat no: 4087 02) make: legrand / siemens / schneider 137 e5.4 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 63a rccb (cat no: 4118 88) make: legrand / siemens / schneider 138 e5.5 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 63a tpmcb (cat no: 4086 61) make: legrand / siemens / schneider 139 e5.6 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 40a dpmcb (cat no: 4086 37) make: legrand / siemens / schneider 140 e5.7 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 40a dprccb (cat no: 4118 82) make: legrand / siemens / schneider 141 e5.8 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 32a tpmcb (cat no: 4086 58) make: legrand / siemens / schneider 142 e5.9 supply and fixing of following mccb/mcbs in the above mentioned distribution board including required wiring, identification & numbering complete as per the directions of engineer in charge. 32a/20a/10a spmcb (cat no: 4085 90/93/95) make: legrand / siemens / schneider 143 e6 supply and installation of 63a tpn 5 pin plug & socket p17 tempra model (cat no.5078 64) with 63a, 300ma fprccb (cat no.4118 93) to install on db with suitable knock out for incoming cables to draw the three phase power supply including ms frame work to fix on wall / column with required fasteners, earthing, painting, numbering and minor civil works etc., complete. make: legrand / l&t / siemens / schneider 144 e7 supply and installation of 32a tpn 5 pin plug & socket p17 tempra model (cat no.5078 62) with 40a, 300ma fprccb (cat no.4118 92) to install on db with suitable knock out for incoming cables to draw the three phase power supply including ms frame work to fix on wall / column with required fasteners, earthing, painting, numbering and minor civil works etc., complete. make: legrand / l&t / siemens / schneider 145 e8 supply and installation of 250 v grade 3 pin metal clad protected weather proof plug socket, housed in legrand ms box with 20a socket (cat no.5078 14) with plug top controlled by 20a, 300ma dprccb (cat no.4118 61) including earthing, neutral link internal wiring, painting and numbering etc., complete to fix on suitable ms bracket / frame work to wall / column as detailed. make: legrand / l&t / siemens / schneider 146 e9.1 supply and installation of following modular type plug sockets with modular type switches with including supply of suitable mounting boxes, dummies, inner plates, cover plates with internal wiring and minor civil works etc., complete. 2 way 6/16a modular power socket controlled by 2 nos of 16a modular switch. make: north west / legrand / l&t/schneider 147 e9.2 supply and installation of following modular type plug sockets with modular type switches with including supply of suitable mounting boxes, dummies, inner plates, cover plates with internal wiring and minor civil works etc., complete. 4 way 6a modular power sockets controlled by 4 nos of 6a modular switches. make: north west / legrand / l&t/schneider 148 e10 supply and installation of 600mmx600mm recessed type 34 40w led false ceiling lighting fixtures with leds mounted symmetrically inside the fitting and with equal distribution of light including control circuitry duly wired to operate at 150 290vac, 50hz to be fixed to beam / ceiling / on false ceiling including supply of all necessary clamps supports, chains, pipes, fasteners, ball & sockets where needed and earthing etc., complete make: philips / crompton / havells / syska leds: osram/ nichia / cree 149 e11 supply and installation, testing and commissioning of 04 feet industrial (aluminium body) box type led lighting fixture of 20 22 watts led lamps with necessary accessories like electronic driver to be fixed to wall / beam / ceiling / on false ceiling including supply of all necessary accessories like supports, pipes, ball and sockets where needed, fasteners and earthing etc., complete. make: philips / crompton / havells / syska/ wipro leds: osram/ nichia / cree 150 e12 supply and installation, testing and commissioning of 02 feet industrial (aluminium body) box type led lighting fixture of 10 15 watts led lamps with necessary accessories like electronic driver to be fixed to wall / beam / ceiling / on false ceiling including supply of all necessary accessories like supports, pipes, ball and sockets where needed, fasteners and earthing etc., complete. make: philips / crompton / havells / syska/wipro/ bajaj leds: osram/ nichia / cree 151 e13 supply and installation of 400mm sweep oscillating type wall mounted fan suitable to operate on single phase 230v 50hz ac supply to be installed on wall / column with required ms frame work, wiring and necessary civil works etc., complete. make: orient / bajaj / almonard 152 e14 supply and installation of high speed 1400mm sweep ceiling fan capacitor type suitable to operate on 230 volts ac supply with blades, down rod, top and bottom canopies to iss 374/1979 double ball bearing including northwest make electronic step type speed control 2 module regulator and necessary fan hook to fix to ceiling / beam with required accessories and fasteners etc., complete. fan make: orient / havells / crompton regulator make: north west / legrand 153 e15.1 supply of following ip66 powder coated aluminium body with toughned glass visor and efficacy not less than 100 lm/w and 5700 kelvin temperature including necessary accessories. 100w led flood light fixture make: philips / crompton /havells /syska/ wipro 154 e16 supply and installation of 300 mm dia. drift air type exhaust fan suitable to operate on 230v, 50hz single phase ac supply in existing hole, grouting of suitable nuts and bolts and as per the directions of engineer in charge. make: crompton / havells / orient 155 e17 supply and installation of 450 mm dia. 900 rpm industrail type heavy duty exhaust fan suitable to operate on 230v, 50hz single phase ac supply, in existing hole with all required accessories including louvers, minor civil works complete etc. make: crompton / havells / orient 156 e18.1 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 2 x 4 sq.mm pvc copper wire make: finolex / kei / universal / rr kabel / lapp / bonton 157 e18.2 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 2 x 2.5 sq.mm pvc copper wire make: finolex / kei / universal / rr kabel / lapp / bonton 158 e18.3 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 1 x 2.5 sq.mm pvc copper wire make: finolex / kei / universal / rr kabel / lapp / bonton 159 e18.4 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 1 x 1.5 sq.mm pvc copper wire make: finolex / kei / universal / rr kabel / lapp / bonton 160 e18.5 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 5 x 6 sq.mm pvc copper wire make: finolex / kei / universal / rr kabel / lapp / bonton 161 e18.6 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 1 x 10 sq.mm pvc copper wire make: finolex / kei / universal / rr kabel / lapp / bonton 162 e18.7 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 3 core 2.5 sqmm flexible cable make: finolex / kei / universal / rr kabel / lapp / bonton 163 e18.8 supply and drawing of 600v grade pvc insulated copper frls wires in existing surface / recessed steel / pvc conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 3 core 2.5 sqmm flat cable make: finolex / kei / universal / rr kabel / lapp / bonton 164 e19.1 modular point wiring with 2 nos. of multi strand 1.5 sq.mm pvc insulated fr copper wire preferably black colour for neutral of 1100 volts grade, frls pvc conduit pipe from 20mm / 25mm / 32mm to be laid on walls (surface / recess), columns, furniture (including supply of conduit and its accessories) supported on saddles with number of wires bunched at certain places, controlled by 6a, 250v single pole modular type switches for light / fan point including 6a socket for wall mounting fan, ceiling rose for tube light fixture / ceiling fan and 15a modular type switches for flood light, flush marked mounted on suitable mounting boxes (ms), inner plates, cover plates with internal wiring. supply being tapped from db with 2 nos. of multi strands 2.5 sq.mm pvc copper wire for primary light / fan. supply of all necessary accessories like, ceiling rose, bh/ah, 6a, ms junction box earthing the installation with 1.5 sq.mm pvc copper wire (green colour) and numbering etc., complete. one switches controlling one light / fans. make: finolex/l&t (wires) & north west / legrand / l&t switches. 165 e19.2 modular point wiring with 2 nos. of multi strand 1.5 sq.mm pvc insulated fr copper wire preferably black colour for neutral of 1100 volts grade, frls pvc conduit pipe from 20mm / 25mm / 32mm to be laid on walls (surface / recess), columns, furniture (including supply of conduit and its accessories) supported on saddles with number of wires bunched at certain places, controlled by 6a, 250v single pole modular type switches for light / fan point including 6a socket for wall mounting fan, ceiling rose for tube light fixture / ceiling fan and 15a modular type switches for flood light, flush marked mounted on suitable mounting boxes (ms), inner plates, cover plates with internal wiring. supply being tapped from db with 2 nos. of multi strands 2.5 sq.mm pvc copper wire for primary light / fan. supply of all necessary accessories like, ceiling rose, bh/ah, 6a, ms junction box earthing the installation with 1.5 sq.mm pvc copper wire (green colour) and numbering etc., complete. one switches controlling two lights. make: finolex/l&t (wires) & north west / legrand / l&t switches. 166 e20.1 supply and laying of heavy duty medium class frls pvc conduit pipe with necessary accessories such as bends, junction boxes, reducers etc., on wall (surface / recess) / column / beam / roof / concealed in wall supported on saddles, clamps, including all minor civil works, welding of strips, painting, earthing etc., complete and as per instructions of engineer in charge. 25 mm dia. frls pvc conduit pipe. make: vip / sudhakar / precision 167 e20.2 supply and laying of heavy duty medium class frls pvc conduit pipe with necessary accessories such as bends, junction boxes, reducers etc., on wall (surface / recess) / column / beam / roof / concealed in wall supported on saddles, clamps, including all minor civil works, welding of strips, painting, earthing etc., complete and as per instructions of engineer in charge. 20 mm dia. frls pvc conduit pipe. make: vip / sudhakar / precision 168 e21.1 supply and fixing of following communication outlet sockets to be mounted in a cover plates fixed to wall / columns / departmental supplied modular furnitures. rj11 telephone make: northwest/ legrand / l&t 169 e21.2 supply and fixing of following communication outlet sockets to be mounted in a cover plates fixed to wall / columns / departmental supplied modular furnitures. rj 45 lan (cat 6) make: northwest/ legrand / l&t 170 e22.1 supply and installation of ms powder coated telephone distribution boxes with crones & lock facility and connected fasteners etc., complete 20 pair db box of size 8.5 x 8.5 171 e23.1 supply and laying of 0.5mm dia annealed copper conductor armoured following telephone cables in laid conduits, dwc pipes, modular furnitures raceways etc., and as per the instructions of engineer in charge. 20 pair jelly filled armoured telephone cable make: finolex / delton 172 e23.2 supply and laying of 0.5mm dia annealed copper conductor armoured following telephone cables in laid conduits, dwc pipes, modular furnitures raceways etc., and as per the instructions of engineer in charge. 04 pair pvc telephone cables make: finolex / delton 173 e24 supply & laying giga speed structured network cable cat 6 in existing laid conduits, modular furnitures raceways etc., and and as per the instructions of engineer in charge. make: amp/d link/finolex 174 e25.1 supply and fixing of following modular convex type cover plate to be fixed on modular furniture / gi metal box on walls / columns. 2 modular cover plate make: northwest/ legrand / l&t 175 e26 supply and installation of two module modular metal enclosure boxes including fixing in the wall surface / recess, modular furniture with minor civil works etc, make: northwest/ legrand / l&t 176 e27.1 supply and installation of following perforated ms cable tray, including fixing of supports joined with suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspenders etc. as required. 375 x 50 x 2mm cable tray 177 e28 supply, installation, testing & commissioning of new earth pits as per is 3043 with ul listed 3/4 copper bonded steel rod of 3 mtrs long, scope of work includes all civil works like excavation of pit (3 mtrs depth), backfilling the pit with carbon based chemical ground enhancement material of 22.5kg to be supplied by the contractor including construction of chamber for the pit, frame around the pit, supply of pit cover, measurement of earth pit resistance complete as per the instructions of engineer in charge. 178 e29.1 excavation of about 1mtr deep suitable width trench for accommodating following runs of lt power armoured cable in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site and provision of sand cushioning on top and bottom of cable, placing of bricks to either sides and top of cable, back filling, tapping, including supply and fixing of lt cable route markers at every 15mtrs interval as instructed by engineer in charge. 3.5 core 150 sq.mm armoured al. cable. 179 e29.2 excavation of about 1mtr deep suitable width trench for accommodating following runs of lt power armoured cable in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site and provision of sand cushioning on top and bottom of cable, placing of bricks to either sides and top of cable, back filling, tapping, including supply and fixing of lt cable route markers at every 15mtrs interval as instructed by engineer in charge. 3.5 core 70 sqmm al. armoured cable. 180 e29.3 excavation of about 1mtr deep suitable width trench for accommodating following runs of lt power armoured cable in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site and provision of sand cushioning on top and bottom of cable, placing of bricks to either sides and top of cable, back filling, tapping, including supply and fixing of lt cable route markers at every 15mtrs interval as instructed by engineer in charge. 3.5 core 25 sq.mm armoured al. cable. 181 e29.4 excavation of about 1mtr deep suitable width trench for accommodating following runs of lt power armoured cable in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site and provision of sand cushioning on top and bottom of cable, placing of bricks to either sides and top of cable, back filling, tapping, including supply and fixing of lt cable route markers at every 15mtrs interval as instructed by engineer in charge. 4 core 10 sq.mm armoured al. cable. 182 e30 excavation of about 0.5 mtr deep suitable width trench for accommodating dwc pipe for drawing telephone cable in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site as instructed by engineer in charge. 183 e31 supply and laying of 9 dia rcc pressure hume pipe with required collars for road crossing including road cutting of 1 mtr deep for laying the 150 sqmm aluminium armoured cable and backfilling of excavated soil and making the surface to original shape including all civil works. 184 e32.1 supply and laying of hot dip gi /copper strip / wire as under including interconnections and tapping, wherever necessary on wall / partition / trench / underground by excavation from earth pit to the building, with required civil works like welding, clamping and painting etc., complete. 50 x 6 mm g.i strip 185 e32.2 supply and laying of hot dip gi /copper strip / wire as under including interconnections and tapping, wherever necessary on wall / partition / trench / underground by excavation from earth pit to the building, with required civil works like welding, clamping and painting etc., complete. 25 x 6 mm g.i strip 186 e32.3 supply and laying of hot dip gi /copper strip / wire as under including interconnections and tapping, wherever necessary on wall / partition / trench / underground by excavation from earth pit to the building, with required civil works like welding, clamping and painting etc., complete. 25 x 3 mm g.i strip 187 e32.4 supply and laying of hot dip gi /copper strip / wire as under including interconnections and tapping, wherever necessary on wall / partition / trench / underground by excavation from earth pit to the building, with required civil works like welding, clamping and painting etc., complete. n0.8 swg g.i wire 188 e33 supply of 440v insulating mats of class a 2mm thickness with antiskid abberations on top side and plain surface on bottom side confirming to is 15652 2006 (all the details like is number and manufacture details are to be embossed on the mat) make: electromat / electrosafe 189 e34 supply and laying of 40x32 mm dwc (double walled corrugated pipe) directly in ground level of existing 0.5 mtr deep outdoor trench and as per the directions of engineer in charge. make: cpe / telerex / sudhaker 190 e35 supply & installation of openwell 0.5 hp submercible pump consisting of cast iron impeller, sauction and delivery as 1 inch along with mcb / starter panel board with dry run protection suitable to operate on 230v, 50hz ac supply. make: crompton/ v guard /kirloskar/ texmo 191 e36 crimping/termination of giga speed structured network cable cat 6 in existing rj45 socket /lan hub and temination of 20 pair/04 pair telephone cable in existing rj11 socket or krone box and per the instructions of engineer in charge. 192 ac.1 supply of 2.0 tr high wall mounted split air conditioner indoor unit and condensing units cooper coil only, (3 star rated) including 3.0 rmt. cooper pipe (suction and discharge) are standard kit, insulation material drain pipe, electrical cord etc., complete and as directed by engineer in charge. make: blue star, voltas, daikin, lg electronic india ltd. 193 ac.2 installation, testing and commissioning of the above including closing of holes and as directed by engineer in charge. 194 ac 3 supply of suitable 2.0 tr condenser stands and as directed by engineer in charge. 195 ac 4 supply of copper pipe (suction & discharge) for 2.0 tr air conditioners. 196 ac 5 supply of electrical cable for 4 core x 2.5 sqmm. make: finolex, legrand, kei, polycab. ...

Highways Department - Tamil Nadu

28220895 vellore division/road safety work providing cantilever gantry board at km 86/2 ( lhs ) , 86/6 ( rhs ) , 92/2 ( lhs ) 93/6 ( lhs ) , 94/0 ( lhs ) , 94/2 ( rhs ) , 102/0 ( lhs ) 102/2 ( rhs ) , of sadras chengalpattu kanchipuram arakkonam tiruttani road ( sh 58 ) ...

Highways Department - Tamil Nadu

28220894 vellore division/road safety work providing cantilever gantry board at km 40/0 ( lhs ) 40/6 ( rhs ) 49/6 ( lhs ) 50/0 ( rhs ) 51/0 ( lhs ) of walajah sholinghur arakkonam road ( sh 61 ) ...

Department Of Heavy Industry - Tamil Nadu

28171864 bids are invited forsingle channel (sc 1) (standard legth of 6 meters per piece) , clamps and fittings frp tray fixing clamp as per boq sl. no. 1.4 (vi) of uploaded specn. doc. , clamps and fittings tray fixing clamp tc1 as per boq sl. no. 1.4 (v) of uploaded specficn. doc. , cantilever arm for 300mm wide trays (350mm) as per boq sl. no. 1.3 of uploaded specificn. document , clamps and fittings clamp (cc2) as per boq sl. no. 1.4 (i) ofuploaded specification document , clamps andfittings base plate (bp1) as per boq sl. no. 1.4 (ii) ofuploaded specificn. document , clamps and fittings beam clamps (bc1) as per boq sl. no. 1.4 (iii) of uploadedspecificn. document , clamps and fittings flat plate teefitting (pf1) as per boq sl. no. 1.4 (iv) of uploaded specn.doc total quantity : 17920...

Southern Railway - Tamil Nadu

27002148 supply of , fabricated and galvanised small parts steel ( sps ) as per rdso drawing no. and is:2062 ( 2011 ) , is: 800. as follows ( approx. weight 2.995959 mt ) . 1 ) register arm extension frame ( part 3111 to 3119 full set, ri no. 3110 ( drg. no eti / ohe / p / 3110 ) weight: 0.060820mt, quantity: 32, total wt: 1.94624 mt. 2 ) stay arm / bracket chair ri no. 3050 ( drg.no.eti / ohe / p / 3050 ) weight: 0.033095 mt, quantity: 11, total wt: 0.364045 mt. 3 ) multiple cantilever extension chair ri no 3101 ( drg no.re / 33 / p / 3100 ) weight: 0.062334 mt quantity: 11 total wt: 0.685674 mt. note: firm should invariably upload the dealership certificate for the product quoted. if not uploaded, the offer will not be considered.please see 1.1.4 in tender terms and condition....

Southern Railway - Tamil Nadu

26528343 supply of , fabricated and galvanised small parts steel (sps) as per rdso drawing no. and is:2062 (2011), is: 800. as follows (approx. weight 2.995959 mt). 1) register arm extension frame (part 3111 to 3119 full set, ri no. 3110 (drg. no eti/ohe/p/3110) weight: 0.060820mt, quantity: 32, total wt: 1.94624 mt. 2) stay arm/bracket chair ri no. 3050 (drg.no.eti/ohe/p/3050) weight: 0.033095 mt, quantity: 11, total wt: 0.364045 mt. 3)multiple cantilever extension chair ri no 3101 ( drg no.re/33/p/3100) weight: 0.062334 mt quantity: 11 total wt: 0.685674 mt. note: firm should invariably upload the dealership certificate for the product quoted. if not uploaded, the offer will not be considered.please see 1.1.4 in tender terms and condition....

Tamilnadu Energy Company Limited - Tamil Nadu

26057787 laying of control instrumentation cables in main plant chp offsite areas , laying of 4px0 . 5sqmm g&f type instrumentation cable as per scope and direction of eic , laying of 8px0 . 5sqm g&f type instrumentation cable as per scope and direction of eic , laying of 12px0 . 5sqm g&f type instrumentation cable as per scope and direction of eic , laying of 16px0 . 5sqm g&f type instrumentation cable as per scope and direction of eic , laying of 3 core , 1 . 5sq . mm instrumentation cable as per scope and direction of eic , laying of 7 core , 1 . 5sq . mm instrumentation cable as per scope and direction of eic , cable dressing and clamping of the existing cables , installation of 50/100/150/300mm size of gi perforated/frp cable trays in convenient section joined with connector including installation of cantilever arm with supports , fastener bolt & nuts etc...

Southern Railway - Tamil Nadu

24756673 replacement of damaged/corroded cantilever assembly at north chennai thermal power station siding in mas gdr section of chennai division....

Highways Department - Tamil Nadu

24627711 tn 09 20 21 hdo dt 12 . 06 . 2020 pkg 92 karur division providing cantilever gantry boards providing over head gantry boards , providing metal crash barriers and including road furniture works on government roads in karur h c and m division . package no 92...

Highways Department - Tamil Nadu

24627684 providing cantilever gantry boards providing over head gantry boards , providing metal crash barriers and including road furniture works on government roads in dharapuram h c and m division package no 90...

Highways Department - Tamil Nadu

24627659 tn 09 20 21 hdo dt 12 . 06 . 2020 pkg 91 erode division providing cantilever gantry boards providing over head gantry boards , providing metal crash barriers and including road furniture works on government roads in erode h c and m division . package no 91...

Highways Department - Tamil Nadu

24627658 tn 09 20 21 hdo dt 12 . 06 . 2020 pkg 89 tirupur division providing cantilever gantry boards providing metal crash barriers and including road furniture works on government roads in tirupur h c and m division package no 89...

Highways Department - Tamil Nadu

24581906 providing cantilever gantry board , metal crash barrier , solar led blinker and thermoplastic paint in other district roads in respect of thanjavur h candm division ....

Deparment Of Technical Education - Tamil Nadu

24529907 supply of furniture chairs for principal room and bursar cabin , furniture , depression design to fit backrest , soft double cushion , adjusting the height of cushion , 360 degrees swivel action , hand rail very soft , back frame structure made of chrome , backrest upholstered with mesh & seat with cushion , armrest connected to frame made of pp , chrome cantilever base connected with backrest...

Deparment Of Technical Education - Tamil Nadu

24457895 furniture chairs for principal and bursar room , furniture , depression design to fit backrest , soft double cushion , adjusting the height of cushion , 360 degrees swivel action , hand rail very soft , back frame structure made of chrome , backrest upholstered with mesh & seat with cushion , armrest connected to frame made of pp , chrome cantilever base connected with backrest...

Defence Research And Development Organisation - Tamil Nadu

24311756 cvrde procurement of mechanical tools for eth procurement of mechanical tools for eth , mechanics tool set ( socket set 229 pieces ) stanley stmt 75064 or equivalent from taparia , cooper tools , irwin , combination spanner set of 23 stanley 70 965e or equivalent from taparia , cooper tools , irwin , ring spanner set of 12 taparia 1812 or equivalent from stanley , cooper tools , intercable , single ended open end jaw spanner set of 2 ( 36 , 41mm ) taparia140 36 , 140 41 or equivalent from stanley , cooper tools , irwin , double open end spanner set of 12 stanley 70 380e or equivalent from stanley , cooper tools , irwin , d e open jaw spanner set of 3 32x36 , 34x36 , 36x41 stanley 72 060 , 061 , 062 or equivalent from taparia , cooper tools , irwin , d e open jaw spanner set of 3 41x46 , 46x50 , 50x55 stanley 72 063 , 064 , 065 or equivalent from taparia , cooper tools , irwin , tubular spanner set taparia ts 08p/08p or equivalent from stanley , cooper tools , irwin , shallow offset ring spanner set of 12 stanley 70 395e or equivalent from taparia , cooper tools , irwin , adjustable wrench 375mm stanley stmt87435 8 or equivalent from taparia , cooper tools , irwin , stillson pipe wrench set of 3 taparia 1273 , 1274 , 1275 or equivalent from stanley , cooper tools , irwin , leader pipe wrench set of 2 ( 24 , 32inch ) irwin . t35024 , t35036 or equivalent from taparia , cooper tools , stanley , 1/2inch sq dr torque wrench 50 225nm britool evt2000a or equivalent from stanley , cooper tools , irwin , 3/4inch sq dr torque wrench 150 750nm britool e100110b or equivalent from stanley , cooper tools , irwin , 11 pcs torque wrench crow foot socket set ( 13 30mm , 40 210nm ) bgs technic or equivalent from tekton , neico , abn , stahlwille , 2 pcs combo of bolt cutter taparia bc 24 , bc 18 or equivalent from taparia , cooper tools , stanley , irwin , combination plier 9 inch stanley or equivalent from taparia , cooper tools , irwin , basic diagonal long nose plier 8inch stanley stht84102 81 or equivalent from taparia , cooper tools , intercable , straight jaw locking plier 6inch irwin t14t or equivalent from taparia , cooper tools , stanley , groove lock water pump plier 10inch irwin t9097850 or equivalent from taparia , cooper tools , stanley , punch & chisel set of 12 stanley 4 18 299 or equivalent from taparia , cooper tools , intercable , irwin , file set of 8 stanley tk910 23c or equivalent from taparia , black & decker intercable , irwin , , cooper tools , ball pein hammer set of 5 craftsman 9 38528 , 522 , 523 , 524 , 525 or equivalent from taparia , stanley , cooper tools , intercable , irwin , drift , centre and leather punch set taparia dclp 7 or equivalent from stanley , cooper tools , irwin , 3 jaw gear puller stanley 70746 s or equivalent from taparia , cooper tools , intercable , irwin , g clamp stanley 0 83 031 or equivalent from taparia , cooper tools , intercable , irwin , heavy duty bench vice 6inch stanley sta183068 or equivalent from irwin , tekton , wilton , rubber grip hacksaw adj frame stanley 15 265 23 or equivalent from taparia , cooper tools , irwin , hacksaw blades 18 tpi 300mm taparia , part no . hss 1218 or equivalent from stanley , cooper tools , irwin , hacksaw blades 24 tpi 300mm taparia , part no . hss 1224 or equivalent from stanley , cooper tools , irwin , long arm sae & metric hex key set of 22 stanley 85 753 or equivalent from taparia , cooper tools , intercable , irwin , metric long ball end hex key set of 9 stanley stmt94162 8 or equivalent from taparia , cooper tools , intercable , irwin , internal and external circlip pliers set of 4 draper 49/4 or equivalent from stanley , taparia , cooper tools , irwin , feeler gauge 25 blades stanley 70115 s or equivalent from blue spot , sealey , us pro , impact driver set stanley j7099a or equivalent from taparia , cooper tools , eastman , oil can 250 cc taparia oc12 or equivalent from rolson , vintage , silverline , flexible magnetic pickup tool 5 pounds stanley j2377xl or equivalent from taparia , digital craft , lever action grease gun stanley 95 385 1v or equivalent from dewalt , lincoln , bulldog , soft face hammer 28mm stanley 57 055 or equivalent from taparia , cooper tools , irwin , measuring tape tough case 3m stanley stht36000 812 or equivalent from taparia , cooper tools , irwin , tin snips 10inch stanley 14 165 or equivalent from taparia , cooper tools , irwin , 5 tray cantilever tools box 460x200x 200mm stanley 1 94 738 or equivalent from bosch , v max , venus , 4 drawers roller cabinet 698 x 477 x 973mm stanley stmt990698 or equivalent from tengtools , husky , expert , slotted screw driver std 6x300mm stanley 62 251 or equivalent from taparia , cooper tools , intercable , slotted screw driver std 8x300mm stanley 62 255 or equivalent from taparia , cooper tools , intercable , flat screw driver 13x1 . 9 x 450mm taparia 931 or equivalent from stanley , cooper tools , intercable , drill bit set of 50 bosch x50ti or equivalent from stanley , cooper tools , irwin , deluxe tap and die set of 117 irwin tools 26377 or equivalent from stanley , cooper tools , bosch , taparia...

Tamil Nadu Generation And Distribution Corporation Limited - Tamil Nadu

24050742 providing cantilever steel bridge at pallavaram over bridge above railway crossing in both end for laying of 33 kv , 1x630 sq . mm cable from pallavaram 110/33/11 kv ss to proposed dp structure providing cantilever steel bridge at pallavaram over bridge above railway crossing in both end for laying of 33 kv , 1x630 sq . mm cable from pallavaram 110/33/11 kv ss to proposed dp structure...

Southern Railway - Tamil Nadu

24032523 supply of , fabricated and galvanized steel structures 1. o type portal upright 10.535m long as per rdso drg no.eti/c/0017/68 sh.2 or latest, weight 0.596459mt quantity 12 nos. total weight 7.157508mt. 2. o type portal end piece 11.048m long as per rdso drg no.eti/c/0017/70 sh.3 or latest, weight 0.574963mt quantity 8 nos. total weight 4.599704mt. 3. o type portal centre piece 09.00m long as per rdso drg no.eti/c/0017/70 sh.4 or latest, weight 0.482453mt quantity 6 nos. total weight 2.894718mt. 4. o type portal knee bracing as per rdso drg no.eti/c/0017/70 sh.6 or latest, weight 0.021824mt quantity 12 nos. total weight 0.261888mt. 5. o type portal covering angle fabricated as per rdso drg no.eti/c/0017/70 sh.5 or latest, weight 0.009228mt quantity 48 nos. total weight 0.442944mt. 6. two track cantilever upright 10.135m long as per rdso drg no.eti/c/0009/69 sh.2 or latest, weight 0.7848mt quantity 3nos. total weight 2.3544mt. 7. two track cantilever boom 8.00m long as per rdso drg no.eti/c/0009/69 sh.5 or latest, weight 0.38256mt quantity 1nos. total weight 0.38256mt. 8. two track cantilever knee 1 & 2 plates as per rdso drg no.eti/c/0011/69 sh.3 or latest, weight 0.09386mt quantity 2sets. total weight 0.18772mt....