Southern Railway - Tamil Nadu

34018797 auction sale of cond. and u / s ci / ms thick plate / flat, ci water tank plate, ci pot / cst 9 with / without tie bar attachment, cst sleeper, st sleeper bearing plate, ms / ci plates, bearing plates with / without rod, nut, bolt and all available fittings & attachments, structure bar, tie plate, bed plate, tie bar, with / without attachments full / cut of sorts and sizes, ms sheets, pump scrap, ms / ci pipes and plates of all sorts and size, ms / ci bench, wheel, stand, hook, plate screws / fish bolts / nuts / nylon bush and any other ms / ci items in nature in as is where is condition. note: ( 1 ) removal of sand, mud, brick, concrete, rust adhering and all sorts of attachments is not permitted. ( 2 ) breaking / hammering is not permitted. ( 3 ) loading by crane is permitted. pl.no. 98080015....

Southern Railway - Tamil Nadu

33060003 auction sale of cond. and u / s ci / ms thick plate / flat, ci water tank plate, ci pot / cst 9 with / without tie bar attachment, cst sleeper, st sleeper bearing plate, ms / ci plates, bearing plates with / without rod, nut, bolt and all available fittings & attachments, structure bar, tie plate, bed plate, tie bar, with / without attachments full / cut of sorts and sizes, ms sheets, pump scrap, ms / ci pipes and plates of all sorts and size, plate screws / fish bolts / nuts / nylon bush and any other ms / ci items in nature in as is where is condition. note: loading by crane permitted. pl.no.98080015....

Military Engineer Services - Tamil Nadu

32767686 provision of toilet neat main gate entrance of age ( i ) r&d office at cvrde avadi 1 excavation in trenches n. exc 1.5 m in depth for foundation etc and getting out in hard / dense soil. 2 surface excavation in hard dense soil n.exc ( not exceeding ) 30cm deep and averaging 15 deep and getting out in hard / dense soil. 3 m & l for pcc type d2 1:4:8 ( 40 mm graded aggregate ) cement concrete in foundations, filling, concrete bed to drain pipes and mass concrete 4 m&l brick work with sub class ‘b’ bricks curved on plan exc 6 m mean radius built in cement mortar 1:6 5 m&l brick work with sub class ‘b’ bricks curved on plan exc 6 m mean radius built in cement mortar 1:4 6 m&l brick work with sub class ‘b’ bricks curved on plan exc 6 m mean radius built in cement mortar 1:4 in half brick thick walls 7 returning filling including spreading, levelling watering and well ramming in layers not exc 25 cm thick complete 8 removal of excavated soil exe 250m but not exe 500 m and deposited where directed. 9 m & l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; verticle or to batter fair finish surface. 10 m & l for formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finish surface 11 m & l for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finish surface 12 m&l for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick ( horizontal or sloping ) 13 m & l formwork to chullah hoods, chajjas, troughs and similar items including edges fair finish 14 form work to edges of concrete slabs exc 10 cm but not exc 20 cm thick 15 m&l tmt bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hookingends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed. 16 all as per srl item no 1.14 here in before but6mm to 8mm dia and stirrups complete all as specified and directed. 17 m&l for rcc m30 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concreteall as specified and as directed. 18 m&l forrcc m30 in columns, pillars, piers, posts and struts complete all as specified. 19 m & l for rcc m30 in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. 20 m & l for rcc m30 in slab supported on walls, beams, and column in floors, roofs, landings, balconies, canopies, deck slabs and inshelves, chajja complete all as specified. 21 m & l for rendering 15mm thick cement mortar in two layers i.e 10mm in cm 1:6 and5mm in cm 1:4 mixed with with approved water proofingcompound as per manufacturer instruction on fair faces of brick work or concrete surfaces.note: wpc measured and paid separtely. 22 m&l rendering 10mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and evenwithout using extra cement complete all as specified 23 m&l rendering 12mm thickin cement mortar ( 1:6 ) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. 24 m&l non skid glazed ceramic coloured ( light colour as approved ) tilesof size 300x300x7 8 mm thick as in flooring set and jointed in neat cement slurry over & including 15 mm thick screed in cement mortar ( 1:6 ) as in floors / sub floors and pointed in white cement with pigment to match the colour of tiles complete all as specified. 25 m&l glazed ceramic coloured tiles in vertical surface 350x 250x 7mm / 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 1:4 cm 10mm thick rendering rough finishedto recive tiles as in skirting / dado. 26 m&l granite galaxy 20mm thick factory polished fixedwithcement slurrypointing with coloured pigment to match the granite including cutting to shape, grinding, polishing bulnosing etc in floors with 15mm thick screed bed in cement mortar ( 1:6 ) all as specified anddirected by the engineer in charge. 27 m & l 75mm thick pccd2, 1:4:8 ( 40mm graded aggregate ) in subbase offlooring complete all as specified. 28 m &l for broken stone hardcore of gauge n exc. 63mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. 29 m&l for cement concrete ( 1:2:4 ) type b 1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by engr in charge and complete all as specified. 30 m&l rendering 15 mm thick screed / cement plaster in cm 1:3 with wpc on rcc surfaces of roof / brick walls finished fair and even while the concrete is green. note : wpc shall be measured and paid seperately. 31 supply only integral water proofing compound. 32 m&l for app based polymeric membrane minimum weighing 3.5 kg / sqm and minimum 3mm thick reinfored with polyster non wooven fabric ( wt not less than 160gm / sqm ) laid over primed surfaces includingbituminous primer conforming to is 3384applied @ 0.3 ltr / sqm byby forced all as specified and directed.four course roof treatment consist of as under: ( i ) applying one coat of bituminous primer conforming to is 3384 @ 0.3 ltr / sqm. ( ii ) laying of app based membrane as specified thickness and weight. ( iii ) applying one coatbitumen grade 85 / 25@1.2kg / sqm. ( iv ) applying two coataluminium paint @100ml / sqm. 33 s&f solid pvc door frame of size 50mmx47mm made out of 5mm plain colour pvc sheetreinforced with ms square tubes s&f opening as per specification & drawings complete all as specified. 34 s&f factory made soild pvc moulded door shutter 28 to 30mm thick ( stiled ) with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face and 2mm plain colour pvc sheet on back face with particle board core. 35 s&f 125mm long ptmt butt hinges fixed with necessary screws powder coated any colour complete all as specified and directed. 36 s&f 150mm long ptmt handles powder coated any colour oval type complete all as specified coloured 125 mm long fixed all as specified and directed. 37 s&f 150mm long ptmt barrel tower bolts powder coated any colour complete all as specified and directed. 38 s&f 250mm long aluminum sliding door bolt powder coated any colour, with hasp and staple bolt type all as specified and directed. 39 supply and fix anodised aluminium, powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 40 s&f alumnium powder coated louvers ( movable arrangement in pair ) for ventilators including locking arrangement complete all as specified and as directed 41 s&f figured glass coloured pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as directed. 42 m&l for pvc ( swr ) floor trap 75 mm dia , including 40mm dia hdpe pipe up to the trap of bath room and jointing with solventwith outlet pipes, stainless steel grating etc fixed all as specified. 43 m&l pvc ( swr ) gully trap 125 / 110 mm, setting and jointing with solvent cement with outlet pipesand pcc 1:2:4 filling around trap and 25mm thick coverslab ( size as directed by eic ) complete all as specified. 44 s&f of 110 mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, fixed and laid in trenches / floors including distance pieces complete all as specified and directed. 45 s&f of 75 mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in swr pipes complete all as specified and directed. 46 s&f 110 mm pvc ( swr ) bend of any radius 47 s&f pvc ( swr ) junction single, ( single t ) equal or unequal for 110mm dia pipe 48 s&f 110 / 75 mm dia pvc ( swr ) reducers connected to door bend with access door complete all as specified 49 s&f 110 mm trap p or s trap pvc ( swr ) complete all as specified. 50 s&f 75 / 110 mm dia pvc ( swr ) vent cowl. 51 s&f vitreous china squatting pan, orissa pattern, size 580x440mm white / coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti syphonage pipe, etc. fixed complete all as specified. 52 s&f pvc 10 ltr. capcityvalveless syphonic action type, flushing cistern, low level, white / coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc with all neccassary fittings complete all as specified directed. 53 s&f in 15 mm size pvc connections with ptmt nuts of 450 mm long complete all as specified. 54 s&f vitreous china urinal, bowl type, coloured , flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinal to plugs fixing with brackets, flush pipe, grating and union for 32mm dia pvc pipe discharge pipe connection to drain etc. 55 s&f urinal spreader of ptmt any colour for fixing with 15 mm dia pipe ( minium weight 60gms ) 56 s&f wash hand basin flat back 550x400mm vitreous chine ( white ) with cantilever brackets embedded in concrete block including the following and fixed in repairs complete all as specified ( a ) brass chromium plated waste coupling 32mm bore size ( b ) waste pipe pvc 32mm bore ( c ) angle iron / cast iron brackets ( d ) cp fancy type pillar cock 15 mm dia. 57 s&f 600x 450 mm leveled edged mirror, 5mm thick of selected quality glass mounted on hard board covered with pvc moulding as per sample kept in ge office and fixed to wooden plugs with chromium plated brass screwed all as directed. 58 m&l soap shelf, pvc white / colour appx size 450 x 125 x 40mm ( as per sample ) . make: prayag or equivalent 59 s&f in repar tubular towel rail 20mm dia d type60cm long between flanges brass chromium plated. 60 s&f bib taps, cp, fancy type screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified. 61 s&f bathroom cabinet pvc with mirror suitable for to keep the bathroom items, size 400 x 500mm, white colour all as specified. make : priyag ( cat. no 554 ) 62 s&f stop valves, fancy type, cp with long shank and cup ( concealed typee ) , screwed both ends for 15mm bore of iron pipe or for union and fixed all as specified. 63 s&f gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15mm bore pipe all as specified and directed. 64 s&f gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe all as specified and directed. 65 s&f in mild steel galvanized tubing 15 mm bore medium grade with fittings to walls, ceiling or laid on floor all as specified. 66 s&f in mild steel galvanized tubing 20 mm bore medium grade with fittings to walls, ceiling or laid on floor all as specified. 67 s&f ofrotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) 1000 ltr capesity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe complete all as specified and directed. 68 m&l preparing new plastered surfaces and applying two coats of white wash on soffits / ceilings etc; complete all as specified or as directed. 69 preparation of new plastered surface and apply two coat of cement base paint over a coat of primer with 2mm thick wall care putty complete all as specified. 70 preparation of newly plastered surfaces of walls and applying two coats of distemperoil emulsion over a coat of chalk whiting, on plastered surfaces with 2mm thick wall care putty complete all as specified. 71 m&l chequered cement colouredconcrete tiles 300mm x 300mm x 25mm, set, jointed and pointed in thick neat cement slurry in floors and pointed with white cements and pigments andincluding 15 mm thick screed in cement mortar ( 1:6 ) as in floors / sub floors and pointed in white cement with pigment to match the colour of tiles complete all as specified. 72 cutting existing galvanized ironwater supply pipe line up to 100 mm dia for inserting suitable size gi tee and socket of size 20mm dia for taking branch connection complete all as specified.note: excavation shall be measured and paid seperately. 73 m&l of 150mm bore salt glazed stone ware pipe grade ‘a’ as in trenches at any depth complete all as specified ( excavation , earth work & concrete shall be measured and paid separately ) . 74 m&l pcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate as in benching for manholes, bands , coping , bed plate etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smoothwithout using extra cement 75 extra for forming fair finish to drain or channel 30cm internal girth in cement concrete using extra cement inl. forms moulds / mitred stopped ends etc. 76 m & l precast rcc 1:2:4 type b1 using 20mm graded crushed stone agg as in manhole cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in cm all as specified and directed by engr in charge. 77 cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1 / 2 round or 3 / 4 section ) in cement concrete 1:2:4 type b 1 smooth finished, and reforming bench ing as required ( internal dia of pipe in 150mm ) 78 m&l for point wiring with pvc insulated, frls pvc unsheathed, two single core, stranded, copper conductor cable 1.5 sqmm size, 1100v grade, drawn into and including concealed rigid non metallic pvc conduit not less then 20mm wide, isi marked with 1.5 sqmm unsheathed, stranded copper frls cable for continuous earth wire and including pressed modular metal concealed terminal boxes of reqd size and suitable size inner frame with outer cover suitable for modular switches / sockets / regulators all as specified & directed for the folowing : ( a ) one light / fan controlled by one switch 79 s&f switch piano flush type, 6 amps, 230v ac, single pole, one way. 80 s&f ceiling rose, surface type, bakelite 65x50mm three terminal 81 s&f batten 4 feet led tube light fitting 18w high lumen efficiency, min 5700k and extruded aluminium body with suitable electronic driver, 230vwith all accessories pre wired, connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable ftl fitting any type any watts all as specified and directed.make: havells / wipro / philips 82 s&fbatten 2 feet led tube light fitting 10w high lumen efficiency, min 5700k and extruded aluminium body with suitable electronic driver, 230vwith all accessories pre wired, connecting up with and including twin core twisted flexible copper cable complete inclluding taking down unserviceable ftl fitting any type any watts all as specified and directed.make: havells / wipro / philips 83 sub main wiring with 2 runs of single core 2.5 sqmm 1100 volts grade, frls pvc insulated, unsheathed cable, copper conductor, multistranded drawn through and incl provision of isi markedpvc conduit 20mm dia medium grade surfcaein walls / roofs / floors etc., including provision of one run frls pvc insulated 2.5 sqmm copper conductor as earth continuity conductor and connecting to common earth dolly incl taking down u / s aluminium wiring complete all as specified and directed. note: two runs of 2.5sqmm cable, one run of earth continuity conductor shall be measured as one unit length and pvc conduit shall be measured under relevant items. 84 supply and fix ventilating fans ventil air dx white 250mm sweep, 230 / 240 volt mounting ring and louvers and shutters with clamp sets, nuts and bolts suitable for ventilatort fansincluding provn of connecting cable 1 sqmm, 3 core, pvc insulated all as specified and directed. 85 supply and fixing inof energy efficient led building security fitting of not less than 30 watt, epoxy powder coated pressure die cast aluminium housing and toughened glass with ip 66 degree of protection, system luminous efficiency morethan 100 lumens / watt and pf>0.9 with voltage range 140 to 270 volt, fitting should be provided wih inbuilt 10 kv minimum surge protection, short circuit and over voltage protection facility for driver and fitting including making electrical connection for cable connection complete all as directed. note : cable for connection of led light fitting andincluding mounting bracket of gi pipe 32 mm bore bend to shape with 2 nos ms flat 32 x 3 mm thick with suitable nuts & bolts for mounting the fitting shall be is included in this item and nothing shall be paid extra on this account 86 s&f sheet metal enclosure ( mcb db ) , single phase and neutral with suitale amps rated bus bar, double door type, 240 volts 4 way 87 s&f mcb single pole, 240 volts, 6amps, c series, 10 ka breaking capacity & connection complete all as specifed and directed. 88 s&fmcb single pole & neutral10amp, 240 volts, c series, 10 ka breaking capacity & connection complete all as specifed and directed. 89 s&f fix inearthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including using of 4 mm gi wire as earthing leadby means of bolts, nuts, check nuts and washers of galvanised steel , connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil / rock, pcc 1:3:6 type c1, earthing chamber, precast rcc slab 50mm thick in cement concrete 1:2:4 type b1 reinforced with welded steel wire febric weight hot less than 4 kg / sqm, funnel with gi watering pipe of 20mm bore, medium grade wire mesh and lugs, gi protection pipe of 15mm bore light grade upto 7.50 mtr long test point etc all as specified and directed....

Southern Railway - Tamil Nadu

32212831 supply of supply of heavy duty hydraulic press of capacity 25 ton hand operated .supply of heavy duty hydraulic press of capacity 25 ton hand operated .,heavy duty hydraulic press of capacity 25 ton hand operated type channel body of 200mm x 75mm bed adjustment channel manual hand gear winch for raising and lowering the adjustable bed bed plate v block pressure gauge and all standard accessories and with low and hi pressure pump handles machine size 6 feet x 3 feet ram dia minimum of 70mm stock length minimum of 250mm channel body of 200mm x 75mm oil tank 15 ltrs cylinder seals are of imported pu seals of reputed manufacturers item must be under warranty against any manufacturing defects for a period of not less than one year....

Southern Railway - Tamil Nadu

31920495 auction sale of released & un serviceable cl.iii bed plate & packing plates of sizes 395 nos 18.810mts. location bin no.01 in sse/bri/pamban office premises. not for sale rail 90r 2 nos found in buried condition and 16mm plates length of 5 mtrs 4 nos. note [1]the above materials to be delivered on actual weighment basis. [2]any other material in the lot other than the item earmarked for sale as per d.o is treated as nfs and to be handed over to the custodian.s.1539 no.892245, dt.12.11.2021. hsn code.72044900....

Ministry Of Micro Small And Meduim Enterprises - Tamil Nadu

31775190 bids are invited for iti electrician course lab items total quantity : 1 1 measuring steel tape 2 combination plier insulated 3 screwdriver insulated 4 screwdriver insulated 5 electrician screwdriver thin stem insulated handle 6 heavy duty screwdriver insulated 7 electrician screwdriver thin stem insulated handle 8 punch centre 9 knife double bladed electrician 10 neon tester 11 steel rule graduated both in metric and english unit 12 hammer, cross peen with handle 13 hammer, ball peen with handle 14 pincer 15 c clamp 16 spanner adjustable drop forged, ss 17 blow lamp brass 18 chisel cold 19 chisel firmer with wooden handle 20 allen key alloy steel 21 grease gun 22 bradawl 23 pully puller with 3 legs 24 bearing puller ( inside and outside ) 25 pipe vice cast iron with hardened jaw open type 26 scissors blade, ss 27 scissors blade, ss 28 crimping tool 29 wire cutter and stripper 30 mallet hard wood 31 hammer extractor type 32 hacksaw frame 33 try square 34 outside calliper 35 inside calliper 36 divider 37 pliers long nose insulated 38 pliers flat nose insulated 39 pliers round nose insulated 40 tweezers 41 snip straight and bent heavy duty 42 d.e. metric spanner double ended 43 drill hand brace 44 drill s.s. twist block 45 plane cutters 46 smoothing cutters 47 gauge, wire imperial stainlees steel marked in swg & mm 48 file flat 49 file half round 50 file round 51 file flat rough 52 file flat bastard 53 file flat smooth 54 file rasp, half round 55 copper bit soldering iron. 56 de soldering gun 57 hand vice 58 table vice 59 oil can 60 contactor & auxiliary contacts 61 contactor & auxiliary contacts. 62 limit switch 63 rotary switch 64 relaya. cut out relays b. reverse current c. over current d. under voltage 65 pin type, shackle type, egg type & suspension type insulators including hardware fitting 66 hydrometer 67 hand drill machine 68 portable electric drill machine 69 load bank ( lamp / heater type ) 70 brake test arrangement with two spring balance rating 71 laboratory type induction coil 72 out side micrometer 73 thermometer digital 74 series test lamp 75 knife switch dpdt fitted with fuse terminals 76 knife switch tpdt fitted with fuse terminals 77 miniature breaker 78 earth plate 79 earth electrode 80 mccb 81 elcb and rccb 82 fuses 83 rheostat ( sliding type ) 84 capacitors 85 various electronic components 86 various lamps 87 plug socket piano switch lamp holder 88 cables: twisted pair non metallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable multi conductor cable coaxial cable direct buried cable 89 bus bar with brackets 90 rubber mat 91 electrician helmet 92 rcc pole with accessories ( ms angle iron, ‘c’ clamp, stay insulator etc. ) and materials 93 safety belt 94 ohm meter; series type & shunt type, portable box type 95 digital multi meter 96 a.c. voltmeter m.i. analog, portable box type housed in bakelite case 97 milli voltmeter centre zero analog, portable box type housed in bakelite case 98 ammeter mc analog, portable box type housed in bakelite case 99 ac ammeter mi, analog, portable box type housed in bakelite case 100 kilo wattmeter analog 101 digital wattmeter 102 a.c. energy meter 103 a.c. energy meter 104 power factor meter digital 105 frequency meter 106 magnetic flux meter 107 lux meter 108 tachometer 109 tachometer 110 tong tester / clamp meter 111 megger 112 3 point d.c. starter 113 4 point d.c. starter 114 wheat stone bridge with galvanometer and battery 115 single phase variable auto transformer 116 phase sequence indicator 117 growler 118 ac starters: a. resistance type starter b. direct online starter c. star delta starter manual d. star delta starter – semi automatic e. star delta starter – fully automatic f. star delta starter soft starter g. auto transformer type 119 oscilloscope dual trace 120 function generator 121 soldering iron 122 temperature controlled soldering iron 123 discrete component trainer 124 linear i.c. trainer 125 digital i.c. trainer domestic appliances – 126 a. electric induction plate 127 b. electric kettle 128 c. electric iron 129 d. immersion heater e. a.c. ceiling fan and ac table fan 130 f. geyser ( storage type ) 131 g. mixture & grinder 132 h. washing machine semi automatic 133 i. motor pump set 134 oil testing kit 135 inverter with battery 136 voltage stabilizer 137 dc power supply 138 battery charger 139 current transformer 140 potential transformer 141 solar panel with battery 142 pentium iv computer or latest 143 ink jet / laser printer 144 d.c. shunt generator with control panel 145 motor generator ( ac to dc ) 146 d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker 147 dc series motor coupled with spring balance load 148 dc shunt motor 149 dc compound motor with starter and switch 150 motor generator ( dc to ac ) set consisting of shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. 151 ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load. 152 ac phase wound slip ring motor with starter switch 153 universal motor with starter / switch 154 synchronous motor with accessories like starter, excitation arrangements. 155 thyristor / igbt controlled d.c. motor drive with tacho generator feedback arrangement 156 thyristor / igbt controlled a.c. motor drive with 157 single phase transformer, core type, air cooled 158 three phase transformer, shell type oil cooled with delta / star 159 electrical machine trainer – 160 diesel generator set with changeover switch, over current breaker and water / air cooled with armature, star delta connections ac 3 phase 161 used dc generatorsseries, shunt and compound type for overhauling practice 162 pillar electric drill machine motorized 163 motorised bench grinder 164 a.c. series type motor 165 single phase capacitor motor with starter switch 166 manual motor coil winding machine 167 ceiling fan coil winding machine 168 primary current injection set 169 stepper motor with digital controller 170 shaded pole motor 171 working bench 172 wiring board 173 instructor’s table 174 instructor’s chair 175 metal rack 176 lockers with drawers 177 almirah 178 black board / white board 179 fire extinguisher co2 180 fire buckets...

Southern Railway - Tamil Nadu

31714566 auction sale of condemned and unserviceable ferrous scrap consisting of traction motor fan gaurd,axle box/axle housing,buffer plunger with/withou highv capacity rubber, brake rigging componenets , cam shaft, screw coupling, small gears, all types of bolts and nuts,pins brake head, protective tubes, cbc couplers, draft key, draft gear, armature shafts, gear wheels,buffer casing, wi end shields, spring seat, vibration damper assembly, cam shaft cap, cut equalizing beam link, fan housing, expressor fan, hub, extension shaft, oil cap, hanger, expressor cover, main bearing caps,knuckles, field coil cores, with/without ss attachments, adjusting assembly, sleeves, pulleys, gears, slack adjuster, pinion wheel, axle box cover, cut pieces of center shaft, racers attachments, push rod short, wearing plates, tm nose, pins of sorts and sizes, frame heads, base frames, pistons, control arm arrangements, cut pieces of rotary arm lift released from coach/loco, cut pieces of cam shaft, cbc brackets, bearing inner ,outer racers with /without grease, center pivot male/female, bogie bearing adopter, radiator fan housing with / without shaft/bearings, connecting rods/links, fan blade, load pad base plate, msu tube adjustment washers,end rings,clp liner plating brackets, clevis, bolt,nut,pins,eye bolt, brake cylinder covers, carrier piston with / without connecting rods, cbc housing, machine bed plate, side bearer cover, center pivot bush, cut pieces of plates / rods, turbo charger fan / impeller, cbc bottom plate, bearing cover, end cover, axle box cover/cap, heads of sorts and sizes and similar items melting in nature. note: non ferrous items, cast iron, if any thing found ,to be removed to railways....

Southern Railway - Tamil Nadu

31692778 auction sale of cond. and u / s ci / ms thick plate / flat, ci water tank plate, pipe, ci pot / cst 9 with / without tie bar attachment, cst sleeper, st sleeper bearing plate, ms / ci plates, bearing plates with / without rod, nut, bolt and all available fittings & attachement, structure bar, tie plate, bed plate, tie bar, with / without attachments full / cut of sorts and sizes, ms sheets, ci pipes and plates, plate screws / fish bolts / nuts / nylon bush and any other ms / ci items in nature as is where is condition. note: loading by crane permitted. pl.no.98080015....

Southern Railway - Tamil Nadu

30897568 auction sale of cond. and u / s ci / ms thick plate / flat, ci water tank plate, pipe, ci pot / cst 9 with / without tie bar attachment, st sleeper bearing plate, structure bar, tie plate, bed plate, tie bar, with / without attachments full / cut of sorts and sizes. plate screws / fish bolts / nuts / nylon bush and any other ms / ci items in nature as is where is condition.note: loading by crane permitted. pl.no. 98080015....

Bharat Heavy Electricals Limited - Tamil Nadu

30856899 : procurement of cnc deep hole drilling machine procurement of cnc deep hole drilling machine , deep hole drilling machine , cnc deep hole drilling machine as per boq sl. no. 1 , suitable work table / bed plate for holding the job as per boq sl. no. 2 , oil fume extractor / eliminator as per boq sl. no. 3 , quality inspection / measurement system as per boq sl. no. 4 , spares as per boq sl. no. 5.1 to 5.25 , toolings as per boq sl. no. 6.1 a to 6.1 f and 6.2 a to 6.2 f , pre despatch inspection charges if any as per boq sl. no. 7 , erection, commissioning, performance prove out and training at bhel works as per boq sl. no. 8...

Bharat Heavy Electricals Limited - Tamil Nadu

30585835 : procurement of cnc deep hole drilling machine procurement of cnc deep hole drilling machine , deep hole drilling machine , cnc deep hole drilling machine as per boq sl. no. 1 , suitable work table / bed plate for holding the job as per boq sl. no. 2 , oil fume extractor / eliminator as per boq sl. no. 3 , quality inspection / measurement system as per boq sl. no. 4 , spares as per boq sl. no. 5.1 to 5.25 , toolings as per boq sl. no. 6.1 a to 6.1 f and 6.2 a to 6.2 f , pre despatch inspection charges if any as per boq sl. no. 7 , erection, commissioning, performance prove out and training at bhel works as per boq sl. no. 8...

Bharat Heavy Electricals Limited - Tamil Nadu

30442485 : procurement of cnc deep hole drilling machine procurement of cnc deep hole drilling machine , deep hole drilling machine , cnc deep hole drilling machine as per boq sl. no. 1 , suitable work table / bed plate for holding the job as per boq sl. no. 2 , oil fume extractor / eliminator as per boq sl. no. 3 , quality inspection / measurement system as per boq sl. no. 4 , spares as per boq sl. no. 5.1 to 5.25 , toolings as per boq sl. no. 6.1 a to 6.1 f and 6.2 a to 6.2 f , pre despatch inspection charges if any as per boq sl. no. 7 , erection, commissioning, performance prove out and training at bhel works as per boq sl. no. 8...

Southern Railway - Tamil Nadu

30360901 supply of supply of heavy duty hydraulic press of capacity 25 ton hand operated type .supply of heavy duty hydraulic press of capacity 25 ton hand operated type .,heavy duty hydraulic press of capacity 25 ton hand operated type channel body of 200mm x 75mm bed adjustment channel manual hand gear winch for raising and lowering the adjustable bed bed plate v block pressure gauge and all standard accessories and with low and hi pressure pump handles machine size 6 feet x 3 feet ram dia minimum of 70mm stock length minimum of 250mm channel body of 200mm x 75mm oil tank 15 ltrs cylinder seals are of imported pu seals of reputed manufacturers item must be under warranty against any manufacturing defects for a period of not less than one year. => limited...

Bharat Heavy Electricals Limited - Tamil Nadu

29576836 procurement of cnc deep hole drilling machine procurement of cnc deep hole drilling machine , deep hole drilling machine , cnc deep hole drilling machine as per boq sl. no. 1 , suitable work table / bed plate for holding the job as per boq sl. no. 2 , oil fume extractor / eliminator as per boq sl. no. 3 , quality inspection / measurement system as per boq sl. no. 4 , spares as per boq sl. no. 5.1 to 5.25 , toolings as per boq sl. no. 6.1 a to 6.1 f and 6.2 a to 6.2 f , pre despatch inspection charges if any as per boq sl. no. 7 , erection, commissioning, performance prove out and training at bhel works as per boq sl. no. 8...

Southern Railway - Tamil Nadu

23721313 chennai division: ajj ru section proposed replacement of uneven bed plates and strengthening of corroded steel members at bridge no.85 dn under revenue 2020...

Southern Railway - Tamil Nadu

16756868 tender for replacement of uneven bed plates and strengthening of corroded steel members at bridge no. 127...

Bharat Heavy Electricals Limited - Tamil Nadu

5349865 procurement of ci bed plates, continuous discharge roller hearth furnace, 1600 kva, 11 kv ,415 v compact sub station, apfc panel of 400 kvar, medium voltage switch gear panel, radial drilling machine, 30 ton mechanized job rotator, establishment of clean room ...