Corporation Of Chennai - Tamil Nadu
40628111 hiring charges for tata ace vehicle with manual operated aluminium ladder (7 meter working height) of removing fallen trees at parks in zone 7 (for six months) => limited...
40628111 hiring charges for tata ace vehicle with manual operated aluminium ladder (7 meter working height) of removing fallen trees at parks in zone 7 (for six months) => limited...
40515784 zone 9, ward 109 to 126 will be required for trimming tree branches and other park works. manual operated aluminum ladder (7 meter working height) equipped with tata ace equivalent or equivalent vehicles for six months on hire basis based on requirem => limited...
40501739 tender for repair / maintenance of external electrical infrastructure and connected items in domestic and technical area including lca area 2 m&l for removing of 160 watt flame proof lights along with hanging iron rods fixed in sun shelters by disconnecting the electric cable connections and re fixing in same sunshelter but, other locations by necessary fixing arrangements like welding/clamp/nut bolt etc duly connecting with electric supply and testing complete all as specified and directed by the engineer in charge. (total sunshelters 06 nos) 3 note for item no 2 : the following items are deemed to be inclusive of quoted rate : 4 (a)the above job shall be carried out by a trained electricians only 5 (b)the rate quoted for shifting of all lights in one sun shelter shall be considered as on job. each sunshelters provided with 16 nos flame proof lights 6 (c) each sun shelters have approx. height of 10 meter and the ceiling of each sun shelters have provided with anti bird net. for removal of lights, anti bird net may be removed and kept without any damagefor re fix after the fixing of lights. the contractor has to consider the above aspects while quoting the rate. the quoted rate shall deemed to be inclusive for removing and re fixing of the anti bird net if necessary and nothing extra shall be admissible on this account. 7 (d) necessary t&p, safety belt, vehicle, aluminium ladder, cranes etc. shall be arranged by the contractor and cost for the same shall deem to be included in the quoted unit rate 8 (e)all safety measures and provn of all safety devices, first aid box etc shall be provided by the contractor.contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 9 (f)all type of t & p, pvc insulation tapes, minor nuts/ bolts/ washers etc required shall be provided by the contractor without any extra cost to department. 10 (g)additional cables required if any shall be measured and paid seperately under relevent item here in after. 11 supply onlypvc insulated copper conductor cable 1.5 sqmm, single core round flame proof flexible cable for connection of flame proof lights, complete all as specified and as directed. 12 m&l for periodical servicing / maintenance of 150 watt high bay lights fixed in hangars on quarterly basis including checking of loose connections tightening of loose nut bolts if any and cleaning and testing complete all as specified and directed by the engineer in charge.(total hangers 05 nos) 13 note for item no 12 : the following items are deemed to be inclusive of quoted rate : 14 (a)the above job shall be carried out by a trained electricians only 15 (b)the rate quoted for servicing of all lights in one hangers shall be considered as on job. the payment shall be made on quarterly basisonly after testing of all lights in each sun shelter satisfactorily by the engr in charge. 16 (c) each sun hangers have approx. height of 12 meter and the ceiling of each hangers have provided with anti bird net. for the servicing of the lights, the anti bird net may be removed and kept without any damagefor re fix after the fixing of lights. the contractor has to consider the above aspects while quoting the rate. the quoted rate shall deemed to be inclusive for removing and re fixing of the anti bird net if necessary and nothing extra shall be admissible on this account. 17 (d) necessary t&p, safety belt, vehicle, aluminium ladder, cranes etc. shall be arranged by the contractor and cost for the same shall deem to be included in the quoted unit rate 18 (e)all safety measures and provn of all safety devices, first aid box etc shall be provided by the contractor.contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 19 (f)all type of t & p, pvc insulation tapes, minor nuts/ bolts/ washers and cables etc required for maintaining the services shall be provided by the contractor without any extra cost to department. 20 m & l for disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tapes etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box complete all as directed for the 25/ 35 sqmm 3.5 core size of lt underground armoured cablescomplete all as specified and directed. 21 note for item no 20 : earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall be deemed to be included in the unit rate quoted. 22 s & f gi tubing 40/50 mm bore light grade 1.2 mtr long bent to shape as required with clamps for fixing of street light on poles/ walls including nuts, bolts, washers clamps of suitable size including taking down existing onecomplete all as specified and directed. 23 s & f singlepole mcb 6 to 32 amps, 240 v, 50 hz acsuitable for ‘c’ curve, 10 ka breaking capacity conforming to is 8828 of 1996including taking down existing one complete all as specified and directed. 24 supply and fixing in repairs led flood light 100 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. 25 supply and fixing in repairstpn, mcb 40 to 63 amp, 240 v, 50 hz acsuitable for ‘c’ curve, 10 ka breaking capacitycomplete conforming to is 8828 of 1996 completeall as specified and directed 26 excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for laying of cable and not exceeding 10 sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out completeall as specified and directed 27 riddling sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming complete all as per specified and as directed. . 28 note for item no 27 : in case sufficient sand not obtained from excavation, the rate is deemed to be inclusive for additional qty of sand requiredto be obtain from outside md land as directed by the engineer in charge 29 removing excavated materials not exceeding 50m distance and depositing where directed at level not exceeding 1.5 m above the starting point complete all as per specified and as directed. 30 s&f fly ash bricks using modular bricks as in cable protection cover including taking down existing bricks of any size complete all as per specified and as directed. 31 returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed. 32 s&f xlpeinsulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100volts grade cross sectional area 25 sqmm 3.5 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc complete all as specified and directed. 33 note for item no 32 : excavation and earth work shall be measured and paid separately. 34 s & f cable jointing kit for 1.1 kv grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core xlpe armoured aluminium conductor cable of size 10 sqmm to 16 sqmm complete all as specified and directed. 35 m & l for cutting existing road/pcc/drain for laying of di/gi or any type of pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, wide 800mm including making existing surface with pcc 1:2:4 type b1 using 20mm aggregate thickness of concrete is 150mmcomplete all as specified and directed. 36 note for item no 35 : the tenderer shall take into consideration for following points while quoting his rate for this item andthe unite rate is deemed be included for : 37 (i) earth work excavation in any type of soil 38 (ii) returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and as directed. 39 (iii) removing excavated material to out side md land 40 (iv)laying of any type/any bore of pipe in trenches including taking down any description. supply of pipe will be measured and paid separately 41 (v)150 mm thickpcc 1:2:4 type b1 as inany type of road 42 (vi) gi pipe requiredfor cable protection shall be measured and paid separately under respective item. but labour required for take the cable through gi pipe and laying in trench shall deemed to beincluded in the rate quoted. 43 supply only gi pipe 50 mm bore medium grade for cable protection completeall as specified and as directed by engr in charge. 44 m & l for disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tapes etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box complete all as directed for the 10/16 sqmm 4 core size of lt underground armoured cablescomplete all as specified and directed.. 45 note for item no 44 : earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall be deemed to be included in the unit rate quoted. 46 m & l for cleaning vegetation around the lt pole completely root out from soil and clean the surface onemtr around the pole of street lights complete all as specified and as directed. 47 note for item no 46 : removing of accumulated earth depth upto 15cm cleaning / cutting the grass with hand operated petrol/ kerosene driven grass cutting machine andremoving thegrass waste to outside md land is deemed to be included in quoted rate. 48 s&f powercontactors 40 amps, 4 pole,415v, including taking down old item complete all as specified and as directed. make : cat no 412553 of legrand or equivalent of l&t/ siemans 49 m & l for preparing surfaces by removing exisiting faded sky blue and white straps on pcc poles and applying a coat of sky blue/white straps painting with synthentic enamel paint, eachsky blue/white straps of 30 cm height up to 1.5 mtr from top of pcc coating, writing pole no with white paint on black base of pcc pole by sentensile measure includingapplaying one coat of synthetic enamel paint to clamps/cross arm/street light gi bracket fixed on pole complete all as specified and as directed 50 supply & fix in repair pvc insulated copper conductor cable 1.5 sqmm, 3 core round flexible for connection of street light fitting, complete all as specified and as directed. 51 m&l sub main wiring for circuit complete with 2 runs of 1.5 sqmm single core pvc insulated, unsheathed frls1100 volt grade multi stranded copper conductor cable drawn through and incl suitable size non metallic pvc conduit and accessories complete fixed surface to wall/roof/ceiling etc and 1 run of 1.5 sqmm single core pvc insulated, unsheathed frls 1100v grade multi stranded copper conductor cable as earth continuity conductoretc including taking down existing sub main wiring complete all as specified and directed. 52 note for item no 51 : (a) two runs of 1.5 sqmmpower cable , one run of 1.5 sqmm earth conductor and one run of pvc conduit/casing capping will be measured as one length. 53 (b)connections of cables with mcbs or bus bars shall be done through appropriate size brass/copper thimbles. 54 m & l for removing steel swagedtubular pole 8.5/9 mtr long for providing suitable new bracket for fixingstreet lightand re fixing the poleincluding necessary pcc 1:4:8, type d2 (using 40 mm graded stone aggregate) for foundation of 50 x 50 x 45 cm and coping with 1:2:4, type b1 (using 20 mm graded stone aggregate) complete all as specifiedand directed by engr in chrage 55 s&f in repairs connector suitable for fixing of cable of size cross sectional area 10 sqmm to 25 sqmm armoured/pvc for preventing of short circuiting of cable in junction boxes, complete all as specified and as directed. 56 m & l for preparing the existing painted steel surface and painting with one coat of aluminium paint on cross arms, clamps, ms flat and street light brackets if any on steel / rcc pole for doublecross arm for three phase4 wire system complete all as specified and directed. 57 supply and fixing in repairs led flood light 210 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.. 58 s&f xlpeinsulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100volts grade cross sectional area 16 sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. 59 note for item no 58 : excavation and earth work shall be measured and paid separately. 60 supply, transporting to site, erecting and fixing in position, steel tubular swaged poles of 9mtr longtype 410 sp 31 is 2713 marked complete with ci/ ms base plate, finial taper plug, bolts, nuts, washers and screws as specified, drilling of necessary holes including painting with two coats of aluminium paint overa coat of red oxide primer on exposed surface and black bituminous paint on steel surface embedded in concrete externally and throughout internally and painting 03 nos of band /strips with fluorescent , po box red synthetic enamel paint (30 cm wide each) at a distance of 30 cm from plinth block and number of poles including taking down existing one completeall as specified & directed by engineer in charge. 61 note for item no 60 : earth work excavation, pcc foundation, coping will be measured and paid separately. the rate for pole shall also be included painting to steel tubular pole (in side and out side). 62 m&l cement concrete 1:4:8,type d2 (using 40mm graded stone aggregate ) including necessary form work for pole foundation complete all as specified and directed by engr in charge . 63 m&l cement concrete 1:3:6 type c2(using 40mm graded stone aggregate) including necessary form work for pole foundation complete all as specified and directed by engr in charge . 64 m&l pcc 1:2:4 type b 1 using 20mm graded stone aggregates as in pole coping completeall as specified & directed 65 s&f powercontactors 63 amps, 4 pole,415v, including taking down old item complete all as specified and as directed. make : cat no 412557 of legrand or equivalent in ps 66 m & l for preparing the painted steel surfaces of existing lt steel tubular pole including cross arms, clamps ms flats, steel light bracket if any etc and applying one coat of aluminium paint(above ground/coping level) not exc 8 mtr long including painting of strips of height 0.3mtr each (three nos sky blue and three nos white), writing pole no with black paint with letters/figures 7.5 cm high and tightening of cross arms, clamps and street light brackets complete all as specified and directed. 67 s&f led aviation obstruction light with ip 66 protection water clear poly carbonate uv stabilized dome neoprene rubber with bind spike with 302 nos led bulbs including necessary electric connections including 2.5 sqmm, 2 core, pvc copper cables fixed on wall with 20mm dia pvc conduit from db to light fitting fixed in and including gi pipe 25mm dia 1 mtr long grouted with pcc complete/ binding with existing angle frame etc complete including taking down existing one complete all as specified and directed.make : bajaj cat no 110731 or equivalent in wipro/ cg. 68 m & l earthing testing, identifying the earth and recording of test results in prescribed format all as directed by engineer in charge. each earth pit result be submitted to engineer in charge duly signed by user and mes rep for earth test less than 1 ohm (10 pits and more considered 1 earthing point) 69 earthing testing, identifying the earth and recording of test results in prescribed format all as directed by engineer in charge. each earth pit result be submitted to engineer in charge duly signed by user and mes rep for earth test less than 3 ohm (4 pitsand more considered 1 earthing point) 70 earthing testing, identifying the earth and recording of test results in prescribed format all as directed by engineer in charge. each earth pit result be submitted to engineer in charge duly signed by user and mes rep for earth test less than 4 ohm (3 pits and more considered 1 earthing point) 71 earthing testing, identifying the earth and recording of test results in prescribed format all as directed by engineer in charge. each earth pit result be submitted to engineer in charge duly signed by user and mes rep for conventional type earthing (individual pit) 72 note for item no 68 to 71 : the following items are deemed to be inclusive of quoted rate : (i)the above job shall be carried out by a trained technician having iti in electrical and well known regarding earthing test. documentary proof of the education of tradesman shall be produced, before commencement of work. 73 (ii) the afore said test will be carried out in presence of user and mes representative.(iii) two party (consisting 2 x 1 no. technician with 2 x 1 no. helper) will report every morningat 9 am to je e/m for daily earth testing. 74 (iv) they will testearth resistance every day ( not more than 10 nos earthing/day) in presence of user & mes rep and willrecord it in prescribed format , same will be put to engineer in charge,je e/m duly signed by user & mes rep on very next day, failing which a sum of rs. 100.00 per day will be recovered from the contractor. 75 (v) earth resistance tester will be provided by the contractor. (tester should be calibrated from authorised company/ lab). 76 (vi) contractor will be responsible for pouring of water in the earth pits weekly at their own arrangement with water tanker, etc. (water will be provided by the contractor at his own arrangement and nothing extra will be admissible). 77 (vii) checking of earth pits existing and improve it by watering / adding a layer of salt/ magnesium sulphate/ charcoal, etc. 78 (viii) contractor will be responsible for marking of earth check date and due date on existing plate with paint as specified by engineer in charge. 79 (ix)contractor will be responsible for cleaning of bushes and grass all around upto 1.50 metre area of existing earth pit with tightening of strip. 80 (x)ep no should be mentioned on individual earth pits and er value of installation etc all as specified and directed by engr in charge. 81 (xi)it will be the responsibility of the contractor to liase with station authority to obtain security pass as per station rules for entering/ working in high security tech area. 82 checking of any breaking in the link of earth strip wire of galvanised/copper/aluminium strip any size and jointing them by exothermic welding or brazing including taking down old unserviceable one, complete all as specified and as directed. 83 attending unserviceable/ non functional street light complaints (for street light/perimeter lights/high mast light/flood light etc of any type/size fitted on poles/walls/post/pillars etc)by deploying technically qualified and experienced technicians to find out defective/taking out unserviceable parts such as electronic driver, pvc insulated copper conductor cable for connecting street light fittings etc and repairing by changing the defective parts including minor repair to cable connection/loose connection, screws, nuts & bolts and insulation tap to insulate the lt joint etc and testing complete all as specified and as directed for domestic area of old kalpa colony, new kalpa colony, mehra colony, map qrts, akash enclave, gulmohar enclave, kiran enclave, mes colony, afwwa, various connecting roads and other facilities such as shopping complex/ various institutes/ messes/ play ground, complete perimeter etc located in complete domestic area andtechnical area at af station sulur 84 note for item no 83 : the following items are deemed to be inclusive of quoted rate : 85 (a)the above job shall be carried out by a trained electrician having iti in electrical, documentary proof of the education of tradesman shall be produced before commencement of work. 86 (b)supply only items to be delivered/ supplied to age e/m store yard as per qty asked by engineer in charge with in one calendar month from the date of commencement of contract and these items will be issued from age e/m store yard for attending unserviceable/ defective street light complaints. 87 (c)contractor or his authorised representative has to inspect all street/ security lights on daily basis at their own arrangement between 7.00 pm to 9.00 pm and maintain the record in register which will be put up to engineer in charge/ je on the very next day. 88 (d) a joint inspection for serviceability of all street/security lights will be carried out from 7.00 pm to 9.00 pm on every monday by engineer in charge/ je (e/m)/ user along with contractor or his authorised representative. 89 (e) contractor has to arrange own moveable generatorof suitable capacity for repairing and testing of the street/ security lights, defect rectification of cables, etc. and to check the serviceability after repair.no electricity shall be provided by the department on this account. 90 (f) quoted unit rate shall deemed to be inclusive of attending any breakdown of street/ security lights during night. contractor has to arrange electrician and helper and all necessary t&p and equipments to remove the breakdown. fault will be intimated through telephone/ sms. 91 (g)in case of any delay in attending the complaint more than 12 hrs after handing over routine/urgent work, the contractor shall be liable to pay the penalty as described in penalty clause given here as under. 92 (h) the penalty shall be applicable to the contractor if the delay is noticed by the engr in charge more than twelve hrs after handing over works of urgent nature to the contractor. the engr in chargeshall handover the slip containing specification of work to the contractor by lodging the time and signature of contractor be obtained on slip.the contractor shall attend the complaint immediately and shall report to engr in charge with in 12 hrs. the contractor will keep his tradesmen in stand by for attending any routine / urgent works from the executive.if the nature of job is such that the work cannot be completed within period of 12hrs then the facts shall be brought to the notice of the ge/engr in chargeand the period for the working to the complaint shall be decided by the ge/eic. if the delay is more then twelve hrs period and the ge is not satisfied with the reason for delay then penalty at the rate of rs 50/ per job shall be deducted from the dues of the contractor. please note that this penalty is exclusively other then the condition 56 of iafw 2249 and shall be treated as interim condition of the contract and shall be enforce above as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the dept.the decision of the accepting officer is this regards shall be final and binding. 93 (j) contractor has to ensure serviceability of all street/ security lights of domestic & technical area on daily basis in any weather condition at their own arrangement. 94 (k)contractor shall provide conveyance to the deployed labour for maintaining the services without any extra cost to department. 95 (l)vehicle mounted ladder for maintaining services shall be provided by the contractor at no extra cost to department. 96 (m) materials requiredfor the repairing of the lights shall be measured and paid separately under respective item(s). but labour required for taking down, dismantling, repairing and replacing parts and reinstalling and testing the street lights fittings shall deemed to beincluded in the rate quoted. 97 (n)necessary t&p, safety belt, vehicle, aluminium ladder, etc. will be arranged by the contractor and cost for the same shall deem to be included in the quoted unit rate. 98 (o)all safety measures and provision of all safety devices, first aid box etc shall be provided by the contractor.contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 99 (p)all type of t & p, pvc insulation tapes, minor nuts/ bolts/ washers etc required for maintaining the services shall be provided by the contractor without any extra cost to department. 100 (q)attending and repairing complaint for onelightof any type shall be measured and paid as one job. 101 (r)earth work (if necessary at site) for removing of any cable fault will be measured and paid under respective items. 102 (s) the contractor shall maintain a record of all urgent work at and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the govt. 103 (t)contractor shall provide contact details of his responsible person(s) for any emergency. 104 (u) any materials replaced which are not specified in schedule of credit will be deposited to mes store yard without any extra cost to the department. 105 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 10 watt, complete all as specified and as directed. 106 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 20 watt, complete all as specified and as directed. 107 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 36 watt, complete all as specified and as directed. 108 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 45 watt, complete all as specified and as directed. 109 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 76 watt, complete all as specified and as directed. 110 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 120 watt, complete all as specified and as directed. 111 supply only electronic driver with input voltage 220 to 240volt and output voltage suitable for led light fitting of capacity 160 watt, complete all as specified and as directed. 112 s & f gi water tubes of size of 20 mm bore medium grade isi markedwith all fittings such as bend, elbow, socket, tee etc and fixed completeto wall and ceilings or laid in floors including taking down old unserviceable one, complete all as specified and as directed. 113 s & f bib taps 20 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete including taking down old unserviceable one, all as specified and as directed. 114 s & f in repairs air termination single pointed aluminium rod dia upto 20mm and length upto 300mm including provision of cement concrete 1:2:4 (20mm graded stone aggregate) block 300x300x300 mm and necessary fixing arrangement at roof, complete all as specified and as directed. 115 note for item no 114: if threaded of the rod is damaged then contractor will be responsible for cutting of thread for fixing the rod. any minor repairs/ materials is deemed to be included. 116 s & f aluminium strip 25 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground including taking down existing one complete all as specified and directed. 117 s & f galvanised iron tubing/pipe 40mm bore, light grade for strip protection, fixed in walls/floors with suitable type of clamps, etc. including taking down old unserviceable one, complete all as specified and as directed. 118 s & f in repairs stainless steel screw/ nut and bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut of dia 5mm to 10mm, n. exc 25mm long complete all as specified and directed. 119 s & f mild steel sheet of size approximate 300x200x1.6mm thick sheet egg type, half round type, rectangular type and triangular type with welded 1 (inch) dia 2 (feet) long mild steel pipe with duly different synthetic enamel paint cutting of equipment earth/ lighting arrester earth/ signal earth etc. complete as specified duly painted as specified and marking of earth plate number/ description of earthing/type of earthing on plate with white paint including earth plate no. and earthing resistance with earthing check date and earthing check due date including taking down old unserviceable one, complete all as specified and as directed 120 excavation in existing defective earth pit as notified by the engr in charge and spreading common salt, charcoal dust and magnesium sulphate complete all as specified and directed by engr in charge. 121 note for item no 120: common salt, charcoal dust and magnesium sulphate shall be measured in relevant item of schedule. however labour element for spreading is deemed to be included. 122 supply only common salt commercial in trenches to improve the er value of existing earth pits complete all as specified and directed. 123 supply only charcoal dust/breeze each bags of 25 kg in trenches to improve the er value of existing earth pits complete all as specified and directed. 124 note for item no 123: earthing charcoal dust/breeze shall be supplied in packing as per originally packed by the manufacture 125 supply only magnesium sulphate in trenches to improve the er value of existing erath pits complete all as specified and directed.. 126 s&f xlpeinsulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100volts grade cross sectional area 10 sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. 127 note for item no 126 : excavation and earth work shall be measured and paid separately. 128 supply and fixin replacement of high power led street light fittings energy saving luminaire with lens , capacity 36 watt with system efficacy (lm/w) shall be 100 lumenper watt or more lumens per watt, total system lumen not less than 3600 lumens, pf not less than 0.95, cri not less than 70,colour temp. 5000k to 6500 k, surge protection not less than 5 kv, high pressure die cast aluminium alloy lm6 housingip 65/66 class 1 protection, toughened glass cover, driver efficiency > 85% with constant output of current and voltage against input voltage variation 120 to 270 volt at 50 hz ( + 5%), thd< 10% completeincluding taking down existing complete all as specified and directed. 129 s&f xlpeinsulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100volts grade cross sectional area 10 sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc complete all as specified and directed. 130 s&f xlpeinsulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100volts grade cross sectional area 6 sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc complete all as specified and directed. 131 note for item no 129 & 130 : excavation and earth work shall be measured and paid separately. 132 supply and fixin replacement of high power led street light fittings energy saving luminaire with lens , capacity 60 watt with system efficacy (lm/w) shall be 100 lumenper watt or more lumens per watt, total system lumen not less than 3600 lumens, pf not less than 0.95, cri not less than 70,colour temp. 5000k to 6500 k, surge protection not less than 5 kv, high pressure die cast aluminium alloy lm6 housingip 65/66 class 1 protection, toughened glass cover, driver efficiency > 85% with constant output of current and voltage against input voltage variation 120 to 270 volt at 50 hz ( + 5%), thd< 10% completeincluding taking down existing complete all as specified and directed. 133 s & f synchronising electronic timer unit operated on ac 230 volts, 24 hrs clock time for controlling street lights including taking down old unserviceable timer switches complete all as specified and directed.make : cat part no : 4126 41 of legrand or equivalent in l&t, abb. 134 m & l cleaning of existing solar street light panels fixed above street light pole of approximate height 6 meter by using wet cloth dipped in soap water including the panel perimeter complete all as specified and directed. 135 note for item no 134: (i) the contractor shall be responsible for arrange necessary conveyance vehicle, aluminium self supporting ladder/bamboo ladder, bucket, soap powder, cloths etc and the quoted rate shall be deemed to be inclusive for the above. 136 (ij) contractor has to ensure serviceability of solar street light panel of domestic & technical area on daily basis in any weather condition at their own arrangement. 137 (iii)contractor shall provide conveyance to the deployed labour for maintaining the services without any extra cost to department. 138 (iv)vehicle mounted ladder for maintaining services shall be provided by the contractor at no extra cost to department. 139 (v)necessary t&p, safety belt, vehicle, aluminium ladder, etc. will be arranged by the contractor and cost for the same shall deem to be included in the quoted unit rate. 140 (vi)all safety measures and provision of all safety devices, first aid box etc shall be provided by the contractor.contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 141 m&l in repairs earthing with galvanised earth plate electrode 600x600x 6mm thick burried directlyin ground (earth pit not less than 2.25 metre below ground level) with top edge of the plate not less than 1.50 metre below ground level, connected with galvanised earth strip of size 25x6mm by means of bolts, nuts, check nuts and washers of gi or steel and connected earthing testing point/bus bar including gi 40mm bore (dia) light grade protection pipe, earth plate surrounded by a packed thickness of char coal or coke dust mixed with common salt magnesium sulphate (1 : 1: 0.5) in alternate layers of not exc 150mm thick, pcc pit in cement concrete 1:3:6 (20mm graded stone aggregate) and pre cast rcc cover slab of size 350x350x50 mm in cement concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia tmt bars @ 100mm centre to centre in both ways, gi wire mesh, funnel with gi watering pipe 20mm bore (dia) medium grade including necessary excavation in soft/loose soil, returning, filling in and removal of surplus spoil upto a distance of 50.00 metre and all as shown in electrical plate no. 3 of mes schedule part i and testing on completion, complete all as per specified and as directed. 142 note for item no 141 : (a)all joints should be joined by exothermic welding or brazing. 143 (b)after completion of work earthing shall be tested by the contractor in presence of engineer in charge, user and proper record shall be maintained duly signed by all concerned. 144 (c)earth resistance tester will be provided by the contractor. it should be calibrated from authorised company/ lab.. 145 (d)after testing if desired earth resistance of less than 3 ohm is not obtained, the earthing will be redone at no extra cost to govt. till desired result is obtained. 146 (e)rate shall include gi strip and protection pipe of length up to 7.5m 147 s&f galvanised earth strip of size 25 x 6mm fixed on proper post insulator at the instrument end including taking down existing strip complete all as specified and directed. 148 taking down existing gi strip 25x3mm thick as earthling lead with its accessories and re fixing to wall/roofs etc. drawn in conduit/gi pipe etc complete all as specified and as directed 149 note for item no 148: unit rate is deemed to be included for old broken insulators/ clamps replace with new insulators of existing size from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed. 150 s & f epoxy base insulators of suitable size 40mm height for fixing gi earth strip on wall/ceiling/floor/poles etc including taking down existing one complete all as specified and as directed 151 note for item no 150: quoted unit rate deem to be included drilling holes per metre or as specified on gi/aluminium/copper strip of any type and size. 152 m & l for cutting and screwing existing gi tubing of size 20 /25/ 40mm bore for alterations or additions complete all as specified and as directed 153 supply only chemical i.e. ground enhancing compound in bag of 25 kg each complete all as specified and directed. 154 note for item no 153: material shall be delivered in the store yard of age e/m or as directed by age e/m and nothing extra shall be payable on this account. 155 s & f stop valve, cast copper alloy, screwed down, high pressure with crunch or butterfly handle screwed both ends for union and fixed for size 20mmborepipe complete including taking down existing one complete all as specified and directed. 156 repairing damaged earth pit cover factory made earth chamber in cement concrete 1:3:6(20mm stone aggregate) as shown in electrical plate no. 03 of mes schedule part i and providing pre cast rcc 1:2:4 (20mm graded stone aggregate) in slab /pitcover 450x450x 50mm in size, reinforced with and including 10mm dia tmt bars @ 100mm centre to centre in both ways including funnel and cleaning the surrounding of earth pit cover and pouring salt water to improve the resistance and measuring and recording the same in presence of engineer in charge, complete all as specified and as directed. 157 s & f copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc including taking down existing one complete all as specified and directed. 158 note for item no 157: all joints should be joined by exothermic welding or brazing. 159 m & l for brazing / exothermic welding arrangement for existing copper strip of size 32 x 6 mm / 20 x 3 mm thick completeall as specified and directed. 160 s & f test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 no. 8mm dia, 25mm long hexagonal head screw including taking down old unserviceable one, complete all as per specified and as directed. 161 s & f air termination single pointed copper rod 16mm dia and 300mm long with arrester clamp 16mm made out of brass including provision of cement concrete 1:2:4 (20mm graded stone aggregate) block 300 x 300x 300mm and necessary fixing arrangement at roof including taking down old unserviceable one, complete all as specified and as directed. 162 note for item no 161: if threaded of the rod is damaged then contractor will be responsible for cutting of thread for fixing the rod. any minor repairs/ materials is deemed to be included. 163 s & f factory made rcc 1:2:4 (20mm graded stone aggregate) in slab/pit cover 350x350x50mm in size, reinforced with and including 10mm dia tmt bars @ 100mm centre to centre in both ways, complete including taking down existing one all as specified and as directed. 164 removing existing unserviceable earthing system and supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising 17mm dia copper bondedrod 3 mtr long horizontally pre welded t terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by cpri india alongwith 50 kg earth energizer compound and 10 litres earth resistance reducingliquid. the earthing energizer compound and resistance reducing earthing liquid shall be tested as per iec 62561 7 read with astm g57 06, ci 3.4 a by any nabl accredited lab. the above mentioned rod shall be installed in 8 10 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation. 165 the quoted rate shall also deemed to be included the following : (i)prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of engr in charge/je (e/m),user and the report has tosubmitto garrison engineer with recommendation of manufacturer, if required additional interconnection ofearthing (not more than 04 number of earthing) to achieve earth result less then 1 ohms. the arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. 166 (ii) the description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. the contractor shall quote rate by considering all factors. 167 (iii) rateofearth energizer compound of 25 kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. 168 (iv)resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any nabl accredited lab carried out as per iec 62561 7 read with astmg57 06, ci 3.4a and the certificate of same shall be submitted by the contractor before commencement of work. 169 (v) earth enhancing material should not leach into the adjacent soil or underground water channels and its ph valve should be in neutral range complete all as specified and as directed. it should solidify when mixed with water and set like concrete. 170 (vi) copper strip of size 20 x 3 mm shouldbe fixed on proper post insulator at the instrument end ( the rate of earthing strip up to7.5 mtrs is included in the quoted rate). 171 (vii)testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to garrison engineer duly signed by all concern. 172 (viii)earth resistance tester will be provided by the contractor.tester should be calibrated from authorised company/ lab. 173 (ix)earthing shall be tested after completion of work by the contractor in presence of engr in charge, user and proper record shall be maintained duly signed by all concerned.after testing if the desired earth resistance of less than 1 ohm is not obtained, the earthing will be redone at no extra cost to govt. till desired result is obtained. 174 (x) the contractor shall given a written guarantee of minimum three years for maintaining the earth resistance less than 1 ohm after certified date of completion. 175 (xi) no further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including dry or rocky soil. 176 (xii) during the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to govt till desired result is maintained. 177 (xiii) a security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor for the guarantee period. 178 (xiv) the electrode shallcarry manufacturers name . 179 (xv) the connection clamp shall be permanently welded to the copper bounded rod to avoid any kind of connectivity loss. the pre welded copper bounded rod shall not need any additional clamp for termination. 180 (xvi) the acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. 181 (xvii)the contractor shall submit cpri india certified document for copper bonded rod to ensure genuinity of material. 182 (xviii) sign boardof mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxidezinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr in charge. 183 (xix)earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. 184 s & f in repairs earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any nabl accredited lab for load bearing capacity not less than 9.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm dia for each electrode pit complete all as specified and directed. 185 note for item no 184 : the contractor shall submit load bearing capacity certificate from the manufacturer. 186 supply and fix ip 66 thermoplastic pc gfs polycarbonate weather proof junction box size 255l x 205b x 112d mm with plain walls for cable entries to be drilled individually, system voltage : 415v, 50hz,the plain side walls on the four sides can be drilled and customized for cable entries from any direction. lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked), and they will be sealable without any accessories.cable terminal : 25 sq mm 4 no with 10a sp mcb 1 no, 6sq mm disconnected terminal 1 no, the junction box shall fulfil the following standards weather proof : uv resistant due to solar radiation, rainwater proof, temperature resistant. salt water proof & shall be suitable for off shore applications. iec 60670 22 : particular requirements for connecting boxes and enclosures. iec 60695 – 2 – 11 : flame – retardant & self extinguishing. glow wire tested at minimum 960 deg c. iec 60529 : ip 66 / ip 67 / ip 69 degree of protectionincluding taking down existing all as specified and directed. 187 taking down carefully hanger lights for repair/ replacement of defective spare parts such as ballast, etc including taking down old one of any capacity from 150 watts flame proof light including cleaning internally and externally fixing back the fitting in same position after repair and test complete all as specified and as directed. 188 note for item no 187: following shall be part of job under this item : 189 (a)the above job shall be carried out by a trained electrician 190 (b)all sort of petty t&p items such as pvc insulation table, ladder, galvanised screws, nuts, bolts, washers etc. required to accomplish the job shall be provided by the contractor with out any extra cost to dept. 191 (c) necessary t&p, safety belt, vehicle, aluminium ladder, cranes etc. shall be arranged by the contractor and cost for the same shall deem to be included in the quoted unit rate 192 (d)all safety measures and provn of all safety devices, first aid box etc shall be provided by the contractor.contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 193 supply and fix in repairs flame proof electronic led driver suitable for flame proof flood light fitting 150w sun shelter down light/ flood light fitting of make sudhir/baliga/ cg complete all as specified and directed. 194 m&l for sub main wiring with pvc insulated unsheathedfrls cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and including suitable size steel conduit and all accessories fixed to wall/floors along with 4 sqmm pvc insulated unsheathed copper conductor multi stranded cable 1100v grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size complete all as specified and directed. 195 note for item no 194 : (a)2 runs of 4 sqmm cable along with onerun of 4 sqmm cable for earth conductor and one run ofsteel conduit shall be measured as one length. 196 (b)connections of cables with mcbs or bus bars shall be done through appropriate size brass/copper thimbles. 197 m&l for sub main wiring with pvc insulated unsheathed frls cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and including suitable sizesteel conduit and all accessories fixed to wall/floors along with 6 sqmm pvc insulated unsheathed copper conductor multi stranded cable 1100v grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size complete all as specified and directed. 198 note for item no 197 : (a)2 runs of 6 sqmm cable along with onerun of 6 sqmm cable for earth conductor and one run of steel conduit shall be measured as one length. 199 (b)connections of cables with mcbs or bus bars shall be done through appropriate size brass/copper thimbles. 200 s&f switch flame proof rotary type with termination box in lm6, 16a, single pole 250v complete all as specified and directed. 201 supply and fixing in replacement of switch flame proof switch socket and plug combined in lm6 cable termination box in lm6, 16a, 250v, 2p + earth, complete all as specified and directed make : sudhir, bajaj, baliga. 202 supply and fixing in replacement of luminaire wellglass led zone i gr iic lm6 die cast aluminium lm6 housing, 230v ac, 50 hz suitable for 150w led fitting with 2 nos of 0.75et cable entry, neoprene gasket , stainless steel hardware, epoxy powder coating light grey finish shed 631/is 5 with cable gland, plug & lamp complete all as specified and directed. make cat no flpw 2595/ii c/l of sudhir, bajaj or baliga or equivalent make 203 s&f in replacement of flame proof bulk head fitting 5 w (to be used with red led bulb) including fixing arrangement all as specified and directed. 204 s&f in replacement of cable tray perforated type of size 100 x50mm made out of 1.6mm thick gi sheet fixed in peb structure by providing ms angle 40x40x5mm clamps etc including fittings like bend, tee and making good the disturbed portion and matching with existing surface complete all as specified and directed 205 s&f in replacement of flame proof weather proof vtpn distribution board 4 way 415 volts with mccb 63a , fp, 16 ka as incommer 01 no and mcb 32a tp 02 nos mcb 16a sp 18 nos as out going complete all as specified and directed.. make sudhir or bajaj, baliga or equivalent make. ...
40487017 hiring of tata ace vehicle or other equivalent vehicle fitted with manual operated aluminium ladder (7 meter working height) for tree pruning and removal works in zone 5 => limited...
40483660 hiring of diesel vehicle fitted with aluminium ladder of 7mtr. working height to be used in dn 15 to 22, unit 4 and 5 zone 2 => limited...
40483417 engaging manual operated aluminium ladder 7m working height (diesel vehicles) under hiring basis for the period of 6 months due to northeast monsoon in zone 11 (from dn 143 to 155) => limited...
40482331 providing manual operated aluminium ladder (7 meter working height) fixed tata ace for monsoon activities in zone iv. => limited...
40472324 hiring of diesel vehicle fitted with aluminium ladder of 7mtr. working height to be used in dn 15 to 22, unit 4 and 5 zone 2 => limited...
40458482 engaging tata ace with manual operated aluminium ladder 7meter working height for 6 months in dn 181 to 191,unit 41, 42 and 43, zone xiv. => limited...
40408593 hiring of tata ace vehicle fitted with manual operated aluminium ladder (7 meter working height) for a period of 6 months in zone 1 => limited...
40392256 hiring of manual operated aluminium ladder (7 meters working height) tata ace for 6 months in div 192 to 200, unit 44 and 45,zone 15. => limited...
40383891 engaging tata ace vehicle for hire basis with manual operated aluminium ladder ( 7 meter working height ) of removing fallen trees at parks in zone 6 ( for 6 months ) => limited...
40367676 hiring charges for tata ace vehicle with manual operated aluminium ladder ( 7 meter working height ) of removing fallen trees at parks in zone 7 ( for six months ) => limited...
40318099 hiring of tata ace vehicle fitted with manual operated aluminium ladder (7 meter working height) for a period of 6 months in zone 1 => limited...
40297161 el.d.c.no. sm ii / p10 /5680/2023 hiring of diesel vehicle along with 1no of folding type vertical manual operated 7mtr height aluminum ladder and 2 nos of 7mtr height hydraulic ladder including driver cleaner fuel oil driver cleaner salaries bata hiring of diesel vehicle along with 1no folding type vertical manual operated 7mtr ht al ladder and 2nos of 7mtr ht hydraulic ladder including driver cleaner fuel oil salaries bata insurance other charges for maintenance of st lights zonev non oadm...
40274223 hiring of 4 nos of diesel vehicle along with folding type vertical manual operated 7mtr height aluminium ladder including other charges etc for maintenance of street lights for a period of one year in zone xiii non o and m zone...
39914574 bids are invited for gh transit hh furniture spilit green ac , refrigerator , mini refrigerator , microoven , water dispenser , vaccum cleaner , aluminium ladder , wet grinder total quantity : 130...
39329549 bids are invited for aluminium ladder aluminium self supporting extension ladder 20 ft to 36 ft , aluminium ladder self support 15 ft , aluminium tiltable trolley tower ladder closed height 20 ft to 36 ft total quantity : 3...
39127418 tender for supply of public health materials; shovel with handle ( tata brand ) , shovel with wooden handle, shovel with iron handle, gadaparai ( tata brand ) , gadaparai, four finger iron pickaxe with wooden handle ( 4finger ) ordinary, four finger iron pickaxe with iron handle heavy duty, six tooth iron pickaxe with iron handle ( 6 finger ) ordinary , with chisel handle ( big ) , with wooden handle ( small ) , with wooden handle ( big ) , with iron handle ( small ) , with iron handle ( ( big ) ) sewer pusher with wooden handle , sewer pusher with iron handle, drain cleaning gi plate ( large ) , tin iron pan ( large ) ( ( pond ) heavy , tin iron pan ( large ) ( pond ) medium , tin iron pan ( small ) ( pond ) heavy , tin iron pan ( small ) ( pond ) medium , plastic pan ( pond ) heavy , plastic pan ( pond ) medium , bamboo plate ( small ) , jointer , broom with bamboo handle , road cleaning brush with handle ( small 12 ) , road cleaning brush without handle ( small 12 ) , leather hand gloves 14 , electrical hand gloves 14 , safety gum boot 14 , rain coat police type ( length type ) , face mask normal range plastic model , reflective jacket normal , pvc yellow nap helmet , fiber mug , toilet cleaning brush plastic type , hdpe plastic bin white or green or black10 litter , hdpe plastic bin white or green or black20 litter , hdpe plastic bin white or green or black40 litter , hdpe plastic bin white or green or black50 litter , hdpe plastic bin white or green or black80 litter , plastic dust bin40 litter , plastic dust bin50 litter , plastic dust bin80 litter , plastic dust bin100 litter , full face mask with chlorine cartridges , venus respirator with chlorine cartridges , breathing apparatus savior 30 minutes , breathing apparatus savior 45 minutes , fire extinguisher abc tire 2 kg , fire extinguisher abc tire 5 kg , fire extinguisher abc tire 10 kg , corner guards spring posts , steel ladder above 4 ft & any size , aluminum ladder above 4 ft & any size , bamboo ladder above 8 ft & any size , steel ladder above 4 ft & any size , 3 wheeler vehicle tire , 4 wheeler vehicle tire & any vehicle tire , auto and tractor back side closing net , program writing board brand , program writing board non brand , 10 naga vali , auto tire ( size 4.50 10 ) , auto tube , tractor trailer tire ( size 9.00 16 ) , tractor trailer tube , tractor engine tire ( size 12.4 28 ) , tractor engine tube , tractor front wheel tire ( size 6.00 16 ) , tractor front wheel tube , tata ace tire , tata ace tube , foot mat , leg set , gloves, full suit, sanitizer, basket...
39040943 tender for supply of public health materials. 26 road cleaning brush with handle ( small 12 ) 27 road cleaning brush without handle ( small 12 ) 28 leather hand gloves 14 29 electrical hand gloves 14 30 safety gum boot 14 31 rain coat police type ( length type ) 32 face mask normal range plastic model 33 reflective jacket normal 34 pvc yellow nap helmet 35 fiber mug 36 toilet cleaning brush plastic type 37 hdpe plastic bin white or green or black10 litter 38 hdpe plastic bin white or green or black20 litter 39 hdpe plastic bin white or green or black40 litter 40 hdpe plastic bin white or green or black50 litter 41 hdpe plastic bin white or green or black80 litter 42 plastic dust bin40 litter 43 plastic dust bin50 litter 44 plastic dust bin80 litter 45 plastic dust bin100 litter 46 full face mask with chlorine cartridges 47 venus respirator with chlorine cartridges 48 breathing apparatus saviour 30 minutes 49 breathing apparatus saviour 45 minutes 50 fire extinguisher abc tyre 2 kg 51 fire extinguisher abc tyre 5 kg 52 fire extinguisher abc tyre 10 kg 53 corner guards spring posts 54 steel ladder above 4 ft & any size 55 aluminium ladder above 4 ft & any size 56 bamboo ladder above 8 ft & any size 57 steel ladder above 4 ft & any size 58 3 wheeler vehicle tyre 59 4 wheeler vehicle tyre & any vehicle tyre 60 auto and tractorback side closing net 61 programme writing board brand 62 programme writing board non brand...
38523438 bids are invited for gh transit hh furniture spilit green ac , refrigerator , mini refrigerator , microoven , water dispenser , vaccum cleaner , aluminium ladder , wet grinder total quantity : 130...
38462510 bids are invited for aluminium ladder aluminium self supporting extension ladder 20 ft to 6 ft , aluminium ladder self support 15 ft , aluminium tiltable trolley tower ladder closed height 20 ft to 36 ft total quantity : 3...
37990826 bids are invited for civil items 1 marble cutter machine having following specification bosh gdc 141 corded electric daimond tile and marble cuttter, 1450 watt, 125mm disc di, 12000 rpm, double insulation, overload capacity, 3 kg , hex key and hexagon socket wrench with 1 year warranty each 2 4550 9100 2 angle grinder having following specs gws 800 corded electric angle grinder, m10, 800 watt, 100mm disc dia, back switch, direct cooling, ergonomic, 1.7 kg auxillary handle and accessories withn 1 year warranty. each 1 2994 2994 3 hammer 10kg with wooden handle each 2 670 1340 4 c.p jali 125mm, 100mm 125mm 15 nos & 100mm 10nos each 25 75 1875 5 waste pipe pvc each 50 51 2550 6 mirror looking 600into 450mm with 25mm pvc, wooden decorative type frame. each 15 468 7020 7 glass 4mm plain sqm 30 570 17100 8 stainless steel ss grade 304, wire mesh sqm 100 220 22000 9 fevicol sh 01 ltr each 10 320 3200 10 sun mica 8into 4 1mmply, kit century ply, green ply equivalent nos 10 950 9500 11 ply wood waterproof 18mm 8 into 4plyand kit ply, green ply equivalent nos 10 2467 24670 12 ply wood waterproof 8mm 8 into 4 century ply, kit ply, green ply equivalent nos 5 1475 7375 13 p.j.m screw 20into 6 500 nos each 2 520 1040 14 p.j.m screw 25into 6 500 nos each 2 520 1040 15 p.j.m screw 30into 6 500nos each 2 526 1052 16 p.j.m screw 35into 8 500 nos each 2 520 1040 17 p.j.m screw 40into 8 500 nos each 2 520 1040 18 p.j.m screw 50into 8 500 nos each 2 520 1040 19 p.j.m screw 75into 8 500 nos each 2 520 1040 20 nail 14into 2 kg 5 520 2600 21 nail 14into 1.5 kg 5 110 550 22 nail 14into 3 kg 5 110 550 23 nail 14into 2.5 kg 5 110 550 24 nail 4 inch kg 5 110 550 25 nail pin 20 no 205 kg, pkt nos 2 250 500 26 plastic beeding patti for mdf side edge 18mm, 10mtr nos 4 150 600 27 abro tape 1 inch 6pkt each 10 250 2500 28 hinges patti 3devid 4 into 3devide 4 length 6 feet each 10 90 900 29 ss hinges 3 inch each 24 35 840 30 wood cutter blade 5 inch each 10 90 900 31 sanding paper for machine gritt round no36, 80, 120 each each 60 30 1800 32 iron cutting blade 4 inch 25 nos pkt each 5 375 1875 33 iron cutting blade 12 inch each 5 150 750 34 welding rod pkt pkt 5 350 1750 35 steel grading plate 4 inch nos 10 40 400 36 sanding paper black no 80, 100, 120, 180 ( 15 nos each ) each 60 15 900 37 flush door 35mm sqm 20 1150 23000 38 pvc door 30mm sqm 13 680 8840 39 l clamp 4 inch each 20 40 800 40 pvc plastic gitti pkt 10 30 300 41 ss door stopper each 20 220 4400 42 cup board magnetic catcher as per sampe each 20 25 500 43 ss tower bolt 4inch each 20 58 1160 44 ss handle 150mm as per samle each 20 60 1200 45 handle screw 1 inch 500nos pkt pkt 4 600 2400 46 door closer aluminum door each 5 799 3995 47 door closer flush door each 5 798 3990 48 glass for bathroom window sqm 5 570 2850 49 aluminum handle 6 inch each 20 125 2500 50 tile cutter blade 4 inch each 10 80 800 51 marble cutter blade 4 inch each 10 80 800 52 m sand cum 10 2000 20000 53 common burnt clay bricks first class nos 5000 11 55000 54 portland cement 50kg acc, altratec bag 65 400 26000 55 cement concrete block of 230mm into 300mm, strenth as per is code cum 1000 38 38000 56 aggregate stone 40mm cum 5 1800 9000 57 aggregate stone 20mm cum 5 2000 10000 58 aggregate stone 12mm cum 5 2200 11000 59 aggregate stone 6mm each 5 2200 11000 60 concrete breaker machine bit 8 inch each 10 200 2000 61 hacksaw blade double side teeth 10 pcs each 5 15 75 62 brick towel for masson work 6 inch each 5 150 750 63 hammer 2 kg with wooden handel each 2 350 700 64 line dori each 5 50 250 65 plumb bob iron with therad each 2 50 100 66 brush cutter plastic wire per bundle roll 2 850 1700 67 2t oil for brush cutter machine ltr 15 350 5250 68 engine oil for lawn mower machine castrol ltr 5 350 1750 69 shovel 10 inch favda with wooden handel each 5 350 1750 70 pickaxe with wooden handel about three feet long and weighs about 2.5 pounds each 5 380 1900 71 garden trimming scissor12 inch each 5 559 2795 72 plunzer for sewage block 4inch into 2.5 inch each 5 80 400 73 garden hose 1inch flexible rubber mtr 10 350 3500 74 white cement birla white, jk kg 1 30 30 75 white cement based putty birla, jk kg 1 30 30 76 synthetic enamel paint in black colour asian, berger, indigo, nerolac 20 ltr kg 40 215 8600 77 synthetic enamel paint in white colour asian paint 20 ltr kg 60 216 12960 78 synthetic enamel paint in sky blue colour asian, berger, indigo, nerolac 20 ltr ltr 20 216 4320 79 synthetic enamel paint inivory colour asian, berger, indigo, nerolac 20 ltr ltr 60 296 17760 80 synthetic enamel paint in bus green colour asian paint 20 ltr ltr 4 217.5 870 81 synthetic enamel paint in red colour asian paint 4 ltr ltr 4 217.5 870 82 synthetic enamel paint in chocolate colour asian paint 4 ltr ltr 4 217.5 870 83 synthetic enamel paint in golden brown colour asian paint 4 ltr ltr 4 217.5 870 84 acrylic exterior paint white colour asian paint 20 ltr ltr 80 173 13840 85 acrylic exterior paint sky blue colour asian paint 20 ltr ltr 20 220 4400 86 acrylic exterior primer asian paint 20 ltr ltr 40 110 4400 87 metal primer 4 ltr ltr 4 110 440 88 acrylic interior paint white colour asian paint 20 ltr ltr 80 220 17600 89 acrylic interior paint off white colour asian paint 20 ltr ltr 80 220 17600 90 wood primer asian paint 4 ltr each 4 110 440 91 painting brush 6 inch vicky each 5 180 900 92 painting brush 4 inch vicky each 5 180 900 93 painting brush 3 inch each 10 150 1500 94 painting brush 2 inch each 5 130 650 95 painting roller 8 inch each 5 250 1250 96 painting roller 4 inch each 5 195 975 97 lambi patti 5 inch plastic handle for laying putty each 10 50 500 98 lambi patti 4 inch each 10 50 500 99 bleaching powder 50 kg bag each 50 30 1500 100 turpentine thinner 20 ltr each 100 85 8500 101 draw channel 18 inch s s each 20 125 2500 102 draw channel 20 inch s s each 20 125 2500 103 false ceiling plate 600mm into 600mm into8mm sqm 10 900 9000 104 pre laminated with decorative lamination both side white bord 12mm thick mdf 8 into 4 each 8 1280 10240 105 pre laminated with decorative lamination both side coloured 18mm thick bord mdf 8 into 4 each 8 1760 14080 106 commercial plywood 18mm thick century 8 into 4 each 10 1920 19200 107 triangular file 6 inch length , jk pkt 2 300 600 108 combination stone for sharpening each 5 250 1250 109 m seal 100 gm, pkt each 50 30 1500 110 vitreous china orissa type w.c pan of size 580mm each 2 2300 4600 111 western toilet seat each 2 2800 5600 112 aluminum door stopper 4 inch heavy duty quality each 20 50 1000 113 binding wire kg 10 150 1500 114 barbed wire kg 60 100 6000 115 consentina wire 3mtr coil mtr 5 50 250 116 ptmt soap disc each 20 0 117 tar felt roll 1mtr into15mtr into2mm thick roll 2 2900 5800 118 bit for hammer drill 10nos pkt each 2 500 1000 119 auto hinge, bombay hinge each 30 45 1350 120 wash basin bolt 50mm as per sample each 100 52 5200 121 cement mixing tray 600mm shallowpan each 10 250 2500 122 cpvc brass coupler 15mm each 20 131 2620 123 cpvc brass coupler 20mm each 20 175 3500 124 cpvc brass threaded male adaptor 25mm each 20 265 5300 125 cpvc brass threaded female adaptor 25 into 15mm each 20 97 1940 126 cpvc brass tee 25 into 15mm each 20 130 2600 127 cpvc elbow 25mm each 21 30 630 128 cpvc reducer coupler 25 into 15mm each 20 28 560 129 cpvc reducer coupler 20into15mm each 20 18 360 130 cpvc reducer coupler25into 20mm each 20 30 600 131 cpvc end cap 20mm each 20 12 240 132 cpvc end cap 25mm each 20 18 360 133 cpvc male adaptor plastic 20mm each 20 18 360 134 cpvc male adaptor plastic 25mm each 20 27 540 135 cpvc male adaptor plastic 15mm each 20 13 260 136 metal extension nipple 0.5 inch each 10 40 400 137 cpvc pipe 15mm 4 mtr length each 10 309 3090 138 cpvc pipe 20mm 4mtr length each 10 438 4380 139 cpvc pipe 25mm 4mtr length each 10 678 6780 140 cpvc ball valve 20mm each 10 129 1290 141 cpvc ball valve 25mm each 10 240 2400 142 cpvc thread elbow 20mm each 20 85 1700 143 pvc brass elbow 20mm, 12mm each 20 51 1020 144 pvc reducer socket 25into 20mm each 10 4.5 45 145 pvc reducer socket 32 into 25mm each 10 7.5 75 146 pvc reducer socket 40into 32mm each 10 13.2 132 147 pvc long coupler 32mm each 10 12 120 148 pvc long coupler 62mm each 11 24 264 149 pvc long elbow 32mm each 10 10 100 150 pvc long elbow 62mm each 10 40 400 151 pvc fta 32mm astral, ashrvad, finolex, dutron, sintex , supreme polycon, plasto each 10 7.5 75 152 pvc mta 32mm astral, ashrvad, finolex, dutron, sintex , supreme polycon, plasto each 10 7.5 75 153 pvc elbow 32mm astral, ashrvad, finolex, dutron, sintex , supreme polycon, plasto each 10 10 100 154 pvc solution 100ml each 20 72 1440 155 cpvc solution 100ml each 20 188 3760 156 pvc fta 25mm each 10 5.7 57 157 pvc mta 25mm each 10 5.7 57 158 pvc elbow 25mm each 10 7.5 75 159 pvc coupler 25mm each 10 6 60 160 pvc coupler 32mm each 10 7.5 75 161 pvc pipe 20mm each 20 225 4500 162 pvc pipe 25mm each 20 295 5900 163 pvc pipe 32mm each 20 450 9000 164 pvc pipe 40mm each 20 652 13040 165 pvc pipe 63mm each 20 772 15440 166 pvc end cap 25mm each 10 3.6 36 167 pvc end cap 32mm each 10 4.5 45 168 pvc end cap 20mm each 10 3.3 33 169 pvc ball valve 25mm each 20 61 1220 170 pvc ball valve 32mm each 20 85 1700 171 pvc ball valve 62mm each 10 296 2960 172 spandle parry ware as per sample each 100 75 7500 173 wall mixer spandle parry ware as per sample each 100 75 7500 174 pvc bottle trap each 10 195 1950 175 cp wall mixer parry ware each 5 3289 16445 176 cp brass bibcock 15mm parry ware each 5 663 3315 177 cp brass long nose bib cock 15mm parry ware each 10 786 7860 178 cp brass long body bib cock 15mm parry ware each 10 786 7860 179 cp brass long body bib cock 15mm for kitchen sink parry ware each 5 1151 5755 180 cp brass angle valve 15mm each 7 611 4277 181 lambi patti 8 inch plastic handle each 5 50 250 182 lambi patti 4 inch each 5 50 250 183 pvc health faucet parry ware each 20 224 4480 184 pvc pipe 110mm astral, ashrvad, finolex, dutron, sintex , supreme polycon, plasto mtr 12 285 3420 185 aluminum door lock each 5 180 900 186 ss curtain rod 20mm 12ft lenth pcs 10 350 3500 187 ss curtain rod 25mm 12ft lenth pcs 10 350 3500 188 ss curtain bracket 25mm l shape solid ss centre bracket each 50 35 1750 189 ss curtain bracket side to side 25mm each 20 35 700 190 cp brass 2 in1bibcock 15mm each 3 1047 3141 191 bamboo ladder 20 feet each 2 4000 8000 192 pvcand ptmt connection pipe 15mm each 30 57 1710 193 plumbing thread each 28 10 280 194 taplon tape 10 nos each 50 15 750 195 alluminum ladder 7.5 mtr folding type, adjustable each 1 25000 25000 196 axe big size with wooden handel each 2 350 700 197 knife, dav with wooden handel each 5 350 1750 198 silicon paste for gun 400gm pckt each 5 150 750 199 pw350 husqvarna presssure washer power output2.1 kw, voltage 230 v, rated current 9.5a, frequency 50 hz, phases 1 ph, max pressure 150 bar, water flow 420500 l, h, hose length 9m, operating pressure max 135 bar, max. water inlet temperature 40 c, max self priming suction 1 m, container capacity 0.5l, length of cord 5m, sound power level, guaranteed lwa 90 dba specification...
37898702 tender for supply of water public health materials., cat ( a ) items to be supply and installation road cleaning brush with handle ( small 12 ) road cleaning brush without handle ( small 12 ) leather hand gloves 14 electrical hand gloves 14 safety gum boot 14 rain coat police type ( length type ) face mask normal range plastic model reflective jacket normal pvc yellow nap helmet fiber mug toilet cleaning brush plastic type hdpe plastic bin white or green or black10 litter hdpe plastic bin white or green or black20 litter hdpe plastic bin white or green or black40 litter hdpe plastic bin white or green or black50 litter hdpe plastic bin white or green or black80 litter plastic dust bin40 litter plastic dust bin50 litter plastic dust bin80 litter plastic dust bin100 litter full face mask with chlorine cartridges venus respirator with chlorine cartridges breathing apparatus saviour 30 minutes breathing apparatus saviour 45 minutes fire extinguisher abc tyre 2 kg fire extinguisher abc tyre 5 kg fire extinguisher abc tyre 10 kg corner guards spring posts steel ladder above 4 ft & any size aluminium ladder above 4 ft & any size bamboo ladder above 8 ft & any size steel ladder above 4 ft & any size 3 wheeler vehicle tyre 4 wheeler vehicle tyre & any vehicle tyre auto and tractorback side closing net programme writing board brand programme writing board non brand 10 ehf thë til etc.. refer the document form mere details...
37878385 auction sale of lot no: 11 rs 2000 lot name: aluminium ladder 6mtr, 3mtr...
37848983 mechanical piping and equipment erection works for divided wall column ( dwc ) project at manali refinery of cpcl , piping ( above ground ) : transportation of all piping materials from owners storage location to work site / fabrication shop; fabrication including marking, cutting, edgepreparation tomatchwiththematingedges wherever required, fitup, bending, preheating wherever required, welding, ndt, laying of pipes and pipe spools with necessary supports, over sleepers, overhead pipe racks and at all elevations, hook ups with existing piping, connecting with equipmentnozzles, strainers, steamtraps, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections etc and fixingofgaskets, bolts, nuts includingapplicationof torquewhereverrequired&allotherinlineinstruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer & blinds, piping specials such as mitres and fabricated fittings, vents, drains ( but excludingreinforcingpads ) , swvalvesupto1.5nb, steam supply / condensate recovery stations ( cast / fabricated ) , supply &weldingofstrip to all pipes before hydro testing at exit points of units for earthing purpose; hydro testing, pneumatic testing ( including supply of temporary blinds for testing ) / leak testing with the connected equipments of all piping lines and systems including hook up of new lines with the existing lines, modification / rerouting of existing lines as required andcleaning & flushing by water / compressed air, card board blasting, vacuum, spark testing and any other type of testingasspecifieddraining, dryingbycompressedair, performing positive material identification ( pmi ) using alloy analysers, tocomplete all such works in all respectsscopeofworkforthejob ) asperthespecifications, drawingsandinstructionsofengineer in charge.pmi shallbeperformedbythirdpartyasdefinedinpmi spec. ratesfortubing ( ifany ) shallincluderatesfor valves, fittings, allinlineinstrumentsandtestingetc and erection of necessary scaffolding and stageing to perform the work and dismantling after the getting clearance from engineer in charge shall be inclusive in the scope of work.supply, fabrication & welding of pipe shoe supports & wear pad at support locations are included in unti price.ndt radiography, dp test shall be payable as separate line item. all necessary manpower, machineries, cranes, testing equipment, consumables are included in contractors scope of work. the scope also includes ibr piping.the scope for ibr piping shall include preparation of drawing for ibr approval from director of boilers ( tamil nadu ) , arranging inspection by ibr at site and obtaining pass order for steam / bfwpipelines.note:wherever cpcl power sourcing is not possible, contractor has to arrange his own dg for welding and 5% extra over thecorresponding welding sor rate shall be paid. ( note:this scope of work is applicable for below sl.nos:20 to 650 ) , pre shut down , carbon steel piping ( non ibr ) ; thk. <= 10mm , fabrication ( butt weld ) , nb 2 inch 6 inch , nb 8 inch 14 inch , nb 16 inch 36 inch , fabrication ( fillet weld ) , nb upto 1.5 inch , nb 8 to 14 inch , erection , nb upto 1.5 inch , nb 2 inch 6 inch , nb 8 inch 14 inch , nb 16 inch 36 inch , carbon steel piping ( ibr ) ; thk. <= to 10mm , fabrication ( butt weld ) , nb 2 inch 6 inch , nb 8 inch 14 inch , fabrication ( fillet weld ) , nb upto 1.5 inch , erection , nb upto 1.5 inch , nb 2 inch 6 inch , nb 8 inch 14 inch , during shut down , carbon steel piping ( non ibr ) ; thk. <= 10mm , fabrication ( butt weld ) , nb 2 inch 6 inch , nb 8 inch 14 inch , nb 16 inch 36 inch , fabrication ( fillet weld ) , nb upto 1.5 inch , erection , nb upto 1.5 inch , nb 2 inch 6 inch , nb 8 inch 14 inch , nb 16 inch 36 inch , carbon steel piping ( ibr ) ; thk. <= to 10mm , fabrication ( butt weld ) , nb 2 inch 6 inch , nb 8 inch 14 inch , fabrication ( fillet weld ) , nb upto 1.5 inch , erection , nb upto 1.5 inch , nb 2 inch 6 inch , nb 8 inch 14 inch , stainless steel piping non ibr; thk. <= 10mm , pre shut down , fabrication ( butt weld ) , nb 2 inch 6 inch , fabrication ( fillet weld ) , nb upto 1.5 inch , erection , nb upto 1.5 inch , nb 2 inch 6 inch , during shut down , fabrication ( butt weld ) , nb 2 inch 6 inch , fabrication ( fillet weld ) , nb upto 1.5 inch , erection , nb upto 1.5 inch , nb 2 inch 6 inch , gi piping ( fw mvws spray system ) ; thk. <= 10mm , supplying and laying above ground mild steel galvanized pipes for fire water spray system / sprinkler system / detection system as per piping material specification no:j2a including supply of reducing tees, fittings, elbows, nipples, teflon tapes, white lead etc., cutting the pipes to required lengths, making threads, including laying of pipes on pipe rack, sleepers, t supports, erection of piping on equipments, pumps etc. including joining of pipes and fittings with threaded / flanged connections, including installation of spray nozzles, flanges, break up flanges, gaskets and bolts, hydrostatic testing of the piping including supply of necessary fittings etc. complete as per specifications, drawings and instructions of engineer in charge. ( supply of spray nozzles shall be paid separately under separate sor / shall be given as free issue to the contractor. ) note:seal welding shall be provided for pipe size 6 and above. rate shall be separately paid for supply of fittings.flanges and spray nozzles as per below applicable sor. ( note:this scope of work is applicable for below sl.nos:68 to 94 ) , during shut down , supply and erection of gi pipes conforming to pms no:j2a , nb 0.5 inch , nb 1.0 inch , nb 1.5 inch , nb 2 inch , nb 3 inch , nb 4 inch , nb 6 inch , supplying and erection of galvanized forged fittings and fanges conforming to pms no:j2a ( note: this scope is applicable for below sl.no: 78 to 94 ) , flanges astm a 105 galvanized as per pms j2a , 2 sch hvy flange 150# scrd , 6 sch hvy flange 150# scrd , 6 150 # blind flanges , fittings astm a 105 ( galv ) b16.11 scrf 3000# , nb 1.5 inch elbow 90 deg , nb 1.5 inch elbow 45 deg , nb 1.5 inch eq. tees , nb 1.5 inch x nb 0.5 inch swage concentric reducer , nb 2.0 inch x 0.5 inch swage concentric reducer , nb 0.5 inch half coupling , nb 1.5 inch half coupling , nb 0.5 inch full coupling , fittings is 1239 ( part ii ) ( galv ) , scrf , nb 2 inch elbow 90 deg , nb 3 inch elbow 90 deg , nb 6 inch elbow 90 deg , supply and application of fw line internal painting as per the following painting specification andscope of work attached & spec no : a ) the surface shall be blast cleaned to sa 2.5 using copper slag.b ) two pack cold cured isophthalic polyester acrylic co polymer glass flake filled coating which shall be suitable in the continuous wet operating temperature range of 25 60deg.c. the total dry film thickness 1000 micron minimum. , internal painting of pipesof 4 inch to 24 inch fw line including painting of field joints , piping ( under ground ) : transportation of all piping materials from owners storage location to work site / fabrication shop; fabrication including marking, cutting, edgepreparation tomatchwiththematingedges wherever required, fitup, bending, preheating wherever required, welding, ndt, laying of pipes and pipe spools, hook up with existing piping system, connecting with the underground cbd & ows system, branching with necessaryreinforcing pads, hydrostatic, flushing, cleaning, card board blasting and any other type of testingasspecifieddrawing. the scope of work is also inclusive of blast cleaning to sspc sp 10 providing 1 coat ofsynthetic fast drying primer type b as per awwa c203 ( 1991 ) and providing 4 mm thick coal tar coating wrapping as per awwa c 203 in 2 layers of each 2 mm thickness as per table 13 of painting specification : 6 44 0004.including pcc / rcc floor breaking, excavation, laying of ug pipingafter protective coating, holiday testing, back filling with import new soil, pcc / rcc flooring and completing all associated works in all respects, as per the specifications, drawings andinstructionsofengineer in charge. radiography, dp testing, blast cleaning, protective coal tar wrapping coating, excavation, back filling, pcc & rcc work shall be payable as a separate line item. ( note:this scope of work is applicable for below sl.nos:980 to 1120 ) , fabrication and erection of 0.75 inch cs pipe , fabrication and erection of 1.5 inch cs pipe , fabrication and erection of 2 inch cs pipe , fabrication and erection of 3 inch cs pipe , fabrication and erection of 4 inch cs pipe , carryout grit blasting to sspc sp 10 providing 1 coat of synthetic fast drying primer type b as per awwa c 203and protective coal tar wrapping coat 4 mm as per awwa c 203 as per painting specification for ug piping and carry out holiday testing as per the specifications, drawings andinstructionsofengineer in charge. as per spec no: 6 44 0004 table 13.1 of cs plant piping under ground. , breaking of existing rcc flooring by means of pneumatic hammer / manaual breaking tools and disposal of the debries at designated loction up to 3 km lead outside the refinery as per the instruction of engineer incharge for laying the ug piping , breaking of existing pcc flooring by means of pneumatic hammer / manaual breaking tools and disposal of the debries at designated loction up to 3 km lead outside the refinery as per the instruction of engineer incharge for laying the ug piping , earthwork excavation by mechanical / manual means below ground level forall kinds of works in all types of soils except soft rock and hard rockas classified in specification for a depth up to 1.5m including removalof vegetation, shrubs and debris, removal of surface / rain water, cuttingand dressing of sides in slopes, levelling, grading and ramming of bottoms and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m including providing shoring & strutting if required, providing temporary supports to existing service lines like water pipes, sewage pipes, electric cables, ows / crws pipes, chambers, storm water drain walls etc; all completefor laying the ug piping , backfilling after execution of work to proper grade and level with selected materials from available excavated soil from soil heaps withina lead of 100m, including re excavating the deposited soil excavatedearlier, breaking clods, laying at all depths & heights in layers ofthickness not exceeding 150mm watering, rolling and ramming by manualmethods / mechanical compactors, dressing, trimming, etc., infoundations, trenches, pits, etc.including all labours, tools & tackles etc all complete as per the specifications and directions of engineer in charge. , laying of pcc covering providing, mixing and laying of pcc 1:4:8 ( 1 cement: 4 m sand : 8 coarse aggregate ) nominal mix using 40mm and downgraded coarse aggregate andordinary portland cement 53 grade after back filling the ug piping trench and maintain the necessary level in line with the eixting floor as per the instruction of engineer incharge. , laying of rcc covering providing, mixing and laying in position rcc of grade m35using opc grade 53 cementof approved make with a minimum cement content of 400kg / cu.m , 20mm and down graded coarse aggregates & m sand after back filling the ug piping trench and maintain the necessary level in line with the eixting floor as per the instruction of engineer incharge. , dewatering with contractors own pump the job involves pumping out of water including dewatering oily water mixed with muck / sludge etc. from trenches, pits etc. by contractors own pump as per the direction of the engineer in charge. the job also includes supplying of all types of pumps, tools & tackles, hoses, fuel, all consumables and labour to complete the job in all respects as per eic instructions. , hire charges for 5 hp diesel driven dewatering pump with all accessories including hoses along with one operator for 8 hrs .ea = shift of 8 hrs , running charges for 5 hp diesel driven dewatering pump , valves : transportation of all types of valves ( including specialvalves, motoroperatedvalves, prds, psvs, tsvs, control valves, on off / shutdown valves, self actuatingvalves ) fromownersstoragepointsto contractors stores / worksite and installation of valves at all levelsfor all rating including assembly of valves accessories like air bottlesetc, ifany, fixingofgasketsbolts / nutswherever requiredandperformingpositivematerial identification ( pmi ) using alloy analysers as per specification, drawings and directions of engineer in charge. scope includes servicing of valves such as tightening glands / replacement of gland packing, applying grease etc. scope also includes receipt of all psvs, trvs, pvrvs from cpcl stores, shifting to cpcl work shop for calibration and shift back to site and installation as per the instruction of engineer in charge. ( note:this scope of work is applicable for below sl.nos:114 to 137 ) , flanged / wafervalvesincludingmov ( upto 300# ) , gate valves, globe valves and check valves , nb2.000 inches , nb3.000 inches , nb4.000 nches , nb6.000 inches , nb8.000 inches , nb 10.000 inches , nb 12.000 inches , nb 14.000 inches , control valves, on off / shutdown valve ( upto 600# ) , nb1.000 inches , nb1.500 inches , nb2.000 inches , nb3.000 inches , nb4.000 inches , nb6.000 inches , press.relief / safetyvalves, temp relief safety valves ( upto 600# ) pvrvs ( size are valve inlet size ) , nb0.750 inches ( psvs ) , nb 0.750inches ( tsvs ) , nb1.000inches , nb1.500 inches , nb2.000 inches , nb 10.00 inches ( pvrv on tanks ) , dismantling & erection of control valves & shut down valves for pipeline flushing / hydrotesting ( note:aapplicable for below sl.nos:139 to 145 ) , control valves / on off / shutdown valve ( upto 600# ) , nb1.000 inches , nb1.500 inches , nb2.000 inches , nb3.000 inches , nb4.000 inches , nb6.000 inches , spring support assemblies : transportation of all types of spring support assemblies from owners storage pointstocontractorsstores / worksiteandinstallationof springsupportassembliesforallratingincluding assembly, ifany, fixingofgasketsbolts / nuts, welding attachmentswhereverrequiredandperformingpositive materialidentification ( pmi ) usingalloyanalysersasper specification, drawings and directions of engineer in charge. contractor to ensure that travel stops are removedandspringislockedincoldloadpositionfor hydrotest.itshallbeensuredthatlockingdevicesare removed and springs are properly set at hot load position during commissioning. , spring support assembly fornb 28 inch line , loading arm : transportation of loading arm assembly from owners storage pointstocontractorsstores / worksiteandinstallationof loading arm assembly fixingofgasketsbolts / nuts, welding attachmentswhereverrequiredanderaction as perdrawings and directions of engineer in charge. , loading arm assembly.size:4 inch , reinforcing pads for pipes : fabrication of reinforcing pads for pipe connection wherever required ( from pipes only supplied by the owner ) and erection, fitup, welding& pneumatic leak testing includingdp & / mp testas per the specifications, drawings and instructions ofthe engineer in charge.note:sizesmentionedfor reinforcingpads are for branch pipe. ( note:this scope of work is applicable for below sl.nos:151 to 170 ) , pre shut down , c.s reinforcing pads , nb2.000 inches , nb3.000 inches , nb4.000 inches , nb6.000 inches , nb8.000 inches , nb 10.000 inches , nb 12.000 inches , nb 14.000 inches , during shut down , c.s reinforcing pads , nb2.000 inches , nb3.000 inches , nb4.000 inches , nb6.000 inches , nb8.000 inches , nb 10.000 inches , nb 12.000 inches , nb 14.000 inches , radiography : performance of radiographic inspection on piping ofall types & thicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but requiredtoperformtheworkasperspecifications and instructions of engineer in charge. radiographs shall be submittedtotheengineer in charge. ( repeat radiographyduetodefectiveradiographonrepaired joints due to contractors fault and for additional radiographynecessitatedduetopoorperformanceof contractorsweldersshallbedoneatcontractorscost.overlaps are to be provided as per the applicable codes. note:unitforradiographyquantity is nos of circumferencial weld joints. ( note:this scope of work is applicable for below sl.nos:172 to 203 ) , non plant area ( fabrication yard ) conventional radiography , forjointsall thickness , nb 2.000 inches , nb 3.000 inches , nb 4.000 inches , nb 6.000 inches , nb 8.000 inches , nb 10.000 inches , nb 12.000 inches , nb 14.000 inches , nb 16.000 inches , nb 18.000 inches , nb 20.000 inches , nb 22.000 inches , nb 24.000 inches , nb 28.000 inches , plant area radiography using saferad / close proximity radiography.no impact on other narby activities or personnel available at a distance of approx 2 mtrs ( maximum 1 micro sievert at 4.5 meters from the source of radiography shall be maintained ) , forjointsall thickness , nb 2.000 inches , nb 3.000 inches , nb 4.000 inches , nb 6.000 inches , nb 8.000 inches , nb 10.000 inches , nb 12.000 inches , nb 14.000 inches , nb 16.000 inches , nb 18.000 inches , nb 20.000 inches , nb 22.000 inches , nb 24.000 inches , nb 28.000 inches , dye penetration test : , performanceofdyepenetranttest includingsupplyof dye, developer, cleaner and cleaning cloths etc as required and labour for carrying out the work as per specification and directions of engineer in charge. , dye penetrant test , hydro testing of existing pipe lines , hydro testing of existing pipe lines to the specified test pressure with necessary pumps, gauges, tools & tackles arrangement, draining the water, flushing and air blowing after the hydro test the scope also includes supply of required temporary blinds for blinding and de blinding. ( note:this scope of work is applicable for below sl.nos:209 to 214 ) , up to nb 2 inch , nb 2.5 inch to nb 6 inch , nb 8 inch to nb 10 inch , nb 12 inch to nb 16 inch , nb 18 inch to nb 24 inch , nb 28 inch to nb 36 inch , pipesupports ( frommaterialssuppliedby owner ) : fabrication, erection ( at all elevations ) of pipe supportslikeshoes, cradles, hangers, clamps ( ofall die ) , turnbuckles, saddles, guides, specialsupports, sizes / thicknesses fabricated / welded withstiffenersasperdrawings, t postetc.ofalltypesincludingsupply bolts, grit blast to sspc sp 10, supply & applcation of painting as per painting specifcation no:21046 kavin pe sp 0702, allnecessaryequipments, consumables, labour, returningsurplusmaterialsand scrap etc to owners storage points and completing work as per drawings, specifications and instructions of engineer in charge.modifications / rectifications, if required; and adjustment / alignment during precommisioning, commisioning as per the instructions of engineer in charge. , dummypipesupportsincluding trunion supports forc.s ( owner supplied ) , pipesupports ( frommaterialssuppliedby contractor ) : supply, fabrication, erection ( at all elevations ) of pipe supportslikeshoes, cradles, hangers, clamps ( ofall die ) , turnbuckles, saddles, guides, specialsupports, sizes / thicknesses fabricated / welded with stiffenersasperdrawings, t postetc.ofalltypesincludingsupply bolts, grit blast to sspc sp 10, supply & applcation of painting as per the painting specifcation no:21046 kavin pe sp 0702, allnecessaryequipments, consumables, labour and completing work as per drawings, specifications and instructions of engineer in charge.modifications / rectifications, if required; and adjustment / alignment during precommisioning, commisioning as per the instructions of engineer in charge. , c.s structural steel supports ( contractor supplied ) , csgalvanized u clamps with 4 nuts and tapper washers , removal / dismantling of erected piping ( above ground ) : removal of piping existing / erected including sw valves for modificationas requiredas per drawings / p&ids / instructionsofengineer in chargeatall elevations, includingprovidingassistancetoownerfor draining, cleaning and purging of the lines to be removed, erection of necessary scaffolding wherever required, unbolting of flanged joints / cutting of pipe lines by flame / hacksaw cutting wherever required, installation of flanges & temporary flanges and blind flanges ( to be supplied by the contractor ) , removal ofinsulationfrominsulatedlines, removingsupports, steamtracers, allfittingsandflanges, instrumentsetc, cuttingofpipesinrandom length of 6 mtrs fortransporting purposes, cleaning, flushing, dryingandtransportingall materials to storage point ( within the complexbattery limits ) designatedbyownerincludingstackingof materialanddisposingofwasteetcasinstructedby engineer in charge. , c.s piping , removaloferectedvalves ( aboveground ) : removal of all types and ratings of valves by unbolting, cutting etc. as required, cleaning by flushing with water / air etc.asrequiredandtransportationofthesameto ownersstoragepoint ( withinthe complexbatterylimits ) andstackingasperinstructionsofengineer in charge. ( note:this scope of work is applicable for below sl.nos:223 to 228 ) , nb 2.000 inches , nb 3.000 inches , nb 4.000 inches , nb 6.000 inches , nb 8.000 inches , nb 12.000 inches , removal of instruments disconnection, dismantling, removal of existing instruments with associated accessories presently installed on the equipment, associated piping, connecting stairs, structures / stairways / operating platforms, etc, which are getting dismantled / modified and transportation of the same to stores as per tender specifications, approved drawings and instruction of engineer in charge.this also includes removal of impulse lines / lead lines / purge gaslines / purge oil lines with pipe fittings, tubes, tube fittings, accessories, supports, trays, cables, cableglands, etc., , low friction pads: supply, fabrication and fixing of low friction pads with suitable bonding materials / fasteners, as specified in drawings / isometrics / special support sketches. , teflon pad with compressive strength ( 0.25 offset ) :1870 psi pad thickness : 3 mm , manpower assistance for pre commissioning activities: providing pre commissioning / commissioning assistance totheowner byprovidingskilled / semi skilled / unskilledworkerson 12 hr shift basis asperthedirectionofengineerin charge as per pre commissioning / commissioning specification&procedures withtoolstackles, ppes, consumablesandsupervision ( including safety supervision ) withsinglepointresponsibilityforquality, safety and speed of execution.contractortoprovide&mobilisemanpowerin shiftsonneedbasisontheinstructionofengineer incharge. 3 days notice shall be given for mobilisation / demobilisation. manpower deployment shall be inclusive of required tools and tackles and machinery suchasmachines, grindingmachines, gascuttingsets etc. and consumables thedefinitionofskilled, semi skilled&unskilledisas follows: skilled fitter, welder, gas cutter, grinder, fabricator, semi skilled rigger, unskilled helper, khallasi supervisor. trained personnel skilled: semi skilled: unskilled 1:4:4 note: unit ea indicated shift of 12 hrs , skilled , semi skilled , painting : supply of paints and primers, preparationofsurfacesandapplicationofprimerand finishpaints, identification ( linenumbering ) , lettering, colourbands, colourcodingetc.asspecifiedincluding rubdown and touch up of shop primer wherever required providing scaffolding for all heights, labour, material, tools, andtackles, consumablessupervisionetc.tocomplete the work in all respects as per painting spec: 21046 kavin pe sp 0702, drawings and direction of engineer in charge for all types ofuninsulatedpipingandinsulatedpipingasspecified including all pipes, inline welded valves, fittings, flanges, supports, valves etc. surface preparation by blast cleaning and application of firstcoatofprimer ( inorganiczincsilicate, f9 ) shallbe doneinfabricationyardpriortoerection. forinsulated piping wherever blast cleaning with no primer application isspecified, insuchcasesfinishpaintsshallalsobe applied in the fabrication yard. the identification marks of the piping and joints shall be noted before blasting and thesameshallbetransferredonprimedsurfacewith polyurethanepaint ( f2 ) oraspertheinstructionsof engineer in charge. notes: 1. all joints ( fabrication as well as erection joints ) shall be left unpainted till hydrotesting. 2.noextrapaymentshallbemadefor identification ( line numbering etc. ) of insulated and uninsulatedlines. ( note:this scope of work is applicable for below sl.nos:236 to 306 ) , paintingofun insulatedcs surfaces as per painting spec:: 21046 kavin pe sp 0702 design temp group: 16 to 80 ( deg c ) surface prepartion: sspc sp 10; primer: 1 coat of f 9 @65 75?dft / coat+1coatofp 6@40 ? dft / coat, finish coat : 2 coats of f 6 @100 ? dft / coat+1coatoff 2@40?dft / coat; total final dft in microns ( min ) : 345 355 ( as per table 10.2 of painting spec ) ( note:this specification is applicable for below sl.nos:237 to 259 ) , pipes, connecting fittings & flanges , nb: 0.5inches , nb: 0.75 inches , nb: 1 inches , nb: 1.5 inches , nb: 2 inches , nb: 3 inches , nb: 4 inches , nb: 6 inches , nb: 8 inches , nb: 10inches , nb: 12inches , nb: 14inches , nb: 16inches , valves , nb: 2 inches , nb: 3 inches , nb: 4 inches , nb: 6 inches , nb: 8 inches , nb: 10 inches , nb: 12 inches , nb: 14 inches , painting under insulation for insulated carbonsteel, ltcs, surfacesasperpainting spec : 21046 kavin pe sp 0702 design temp group: 45 to 125 ( deg c ) surface prepartion: sspc sp 10; primer: 1 coat of f 15 @ 75 ?dft / coat, finish paint: 2 coats of f 15 @ 75 ? dft / coat; total dft in microns ( min ) 225 ? . ( note:this specification is applicable for below sl.nos:261 to 278 ) , pipes, connecting fittings & flanges , nb 00.50 inches , nb 00.75 inches , nb 01.00 inches , nb 01.50 inches , nb 02.00 inches , nb 03.00 inches , nb 04.00 inches , nb 06.00 inches , nb 08.00 inches , nb 10.00 inches , nb 12.00 inches , nb 16.00 inches , valves , nb: 2 inches , nb: 3 inches , nb: 4 inches , nb: 6 inches , painting under insulation for insulated carbonsteel, ltcs, surfacesasperpainting spec: 21046 kavin pe sp 0702 design temp group: 126 to 450 ( deg c ) surface prepartion: sspc sp 10; primer: 1 coat of f 12@ 20? dft / coat, finish paint: 2 coats of f 12 @ 20 ? dft / coat; total dft in microns ( min ) :60? ( note:this specification is applicable for below sl.nos:280 to 297 ) , pipes, including fittings & flanges , nb: 0.5inches , nb: 0.75 inches , nb: 1 inches , nb: 1.5 inches , nb: 2 inches , nb: 3 inches , nb: 4 inches , nb: 6 inches , nb: 18 inches , nb: 20inches , nb: 22inches , nb: 24inches , nb: 28inches , valves , nb: 2 inches , nb: 3 inches , nb: 6 inches , paintingofun insulatedgalvanizedpiping surfaces as per painting spec : 21046 kavin pe sp 0702 designtempgroup:upto60 ( degc ) coating system: ] 2coatoff 2@40 micron dft / coat; total final dftin microns ( min ) : 80 micron ( colour code:post office red ) ( note:this specification is applicable for below sl.nos:299 to 306 ) , nb: 0.5 inches , nb: 0.75 inches , nb: 1.00 inches , nb: 1.5 inches , nb: 2.0 inches , nb: 3.0 inches , nb: 4.0 inches , nb: 6.0 inches , painting of equipments , surface preparation, supplyandapplicationoftouch up / complete fieldprimers, intermediate paints as and finish paints per painting specification for each equipments given for c.s vessels, columns, reactors, heat exchangers etc wherever required, providing scaffolding for all heights, labour, material, tools andtackles, consumables, supervisionetc.tocomplete theworkinallrespectasperspecifications, drawings, equipmentdetailsforpaintinganddirectionofengineer in charge for all type of equipments as per painting spec ( applicable specifcation 21046 kavin pe sp 0702 ) .note:painting to be carried out before erection of equipment. , for equipments 212 c 203 ( note:surface preparation and 1 coat of f9 @ 65 75? provided by equipment supplier ) total equipment dft 345 micron. , primer 1 coat of f 8 @100 125?dft / coat ( touch up ) +primer 1coatofp 6@40 ? dft / coat+finish paint 2 coats of f 6 @100 ? dft / coat+finish paint 1coatoff 2@40?dft / coat , for equipments 212 c 201, 212 c 202, 212 r 201a / b ( note:surface preparation and 1 coat of f9 @ 65 75? provided by equipment supplier ) total equipment dft 105 115 micron. , primer 1 coat off 8 @100 125? ( touchup ) +finish paint 3 coats of f 12 @ 20 ? dft / coat , lettering and stenciling , surface preparation, supply and application of primer and paint on insulated and uninsulated equipment for lettering, stencilingonvessels, columns, drums, forthe purposesofidentification ( equipmentname, equipment number & service description ) as per applicable painting specification enclosed elsewhere in the tender document, providingscaffoldingforallheights, labour, materials, tools, tackles, supervisionetc.tocompletetheworkas perspecificationsandinstructionsofengineer in charge. ( note:this scope of work is applicable for below sl.nos:315 and 316 ) , equipmentname, equipmentnumberand service description , supply and application of first quality synthetic enamel paint one coat ( application by brush background painting ) minimum 25microns / coat. , hotinsulation ( plant & offsites ) : ( as per spec no:21046 kavin pe sp 0701 ) , supply of pipe sections or lrb mattresses, all required materials for corrugated / plan cladding, ceilings, straps, of required thickness and density etc. as per specification, storage and protection of all supplied materials in the covered shed, proving and carrying out hot insulation of the equipment, piping, pipe fittings, valves, etc. surfaces, strapping, and stitching of insulation, providing and fixing ms insulation rings of 35x3 mm flat duly riveted and painted by zincphosphate / silicate primer for insulation supports prior to applying insulation, forming the cladding to the shape of the equipment, heads, fixing of water proof bituminous strips, screwing as per the pitch specified, sealing of joints including providing necessary overlaps, inspection windows with cover as per specification, working at all elevations and floors, including providing necessary skilled labours, consumables, scaffoldings, etc. and completing the work in all respects as per specifications, drawings and instructions of owner / eic. all ss equipment insulation shall be done with the ss foils prior to the insulation. supply of materials, providing and installing pipe sections or lrb mattresses of base rockwool ( of density 128 kg / cu.m ) to pipes, pipe fittings, valves, flanges, etc.including necessary cladding, bolting, water proof sealing, labours, consumables, and necessary scaffoldings. for piping insulation works the scaffoldings erected for the pipe line erection / painting shall be used. no separate rate shall be paid for the scaffolding work.for equipment insulation, ( wherever possible scaffolding provided for touch up / finish painting of equipments to be used ) rates shall be inclusive of providing scaffolding. ( note:this scope of work is applicable for below sl.nos:319 to 359 ) , insulationtype:ih;surfacematerial:cs; operating temp. range : upto 125 ( deg c ) ; insulationmaterial : rockwool ( note:this specification is applicable for below sl.nos:320 to 332 ) , pipes, fittings, flanges & valves , nb 00.50 inches; thickness25 mm , nb 00.75 inches; thickness25 mm , nb 01.00 inches; thickness25 mm , nb 01.50 inches; thickness25 mm , nb 02.00 inches; thickness25 mm , nb 03.00 inches; thickness25 mm , nb 04.00 inches; thickness25 mm , nb 06.00 inches; thickness25 mm , nb 08.00 inches; thickness25 mm , nb 10.00 inches; thickness25 mm , nb 12.00 inches; thickness25 mm , nb 16.00 inches; thickness25 mm , insulationtype:ih;surfacematerial:cs; operating temp. range : above 125 ( deg c ) ; to 200 ( deg c ) insulationmaterial : rockwool ( note:this specification is applicable for below sl.nos:334 to 352 ) , pipes, fittings, flanges & valves , nb 00.50 inches; thickness40 mm , nb 00.75 inches; thickness40 mm , nb 01.00 inches; thickness40 mm , nb 01.50 inches; thickness40 mm , nb 02.00 inches; thickness40 mm , nb 03.00 inches; thickness40 mm , nb 04.00 inches; thickness40 mm , nb 06.00 inches; thickness40 mm , nb 08.00 inches; thickness 40 mm , nb 10.00 inches; thickness 40 mm , nb 12.00 inches; thickness 40 mm , nb 14.00 inches; thickness 40 mm , nb 16.00 inches; thickness 40 mm , nb 18.00 inches; thickness 40 mm , nb 20.00 inches; thickness 40 mm , nb 22.00 inches; thickness 40 mm , nb 24.00 inches; thickness 40 mm , nb 28.00 inches; thickness 40 mm , equipment insulation , insulation of equipment 212 c 202 as per the specification given below: insulation type: is ( rockwool ) . ( insulation thickness 25 mm ) , insulation of equipment212 mx 201 ( n ) , 212 e 201 ( shell side ) as per the specification given below: insulation type: ih ( rockwool ) . ( insulation thickness 25 mm ) , insulation of equipment 212 c 22 ( column shell elevation el+11.950 to column top dish el+54.350 including top head ) , 212 r 201a&b, 212 e 204 ( shell & channel side ) , 212 e 207 ( shell & channel side ) , 212 e 25 ( shell side ) as per the specification given below: insulation type: ih ( rockwool ) . ( insulation thickness 40 mm ) , insulation of equipment 212 e 202 ( shell side ) as per the specification given below: insulation type: ih&it ( rockwool ) . ( insulation thickness 40 mm ) , insulation of equipment 212 c 201, 212 e 203 ( shell & channel side ) , 212 e 205 ( shell side ) , 212 e 206 ( shell & channel side ) , 212 e 25 ( channel side ) as per the specification given below: insulation type: ih ( rockwool ) . ( insulation thickness 50 mm ) , insulation of equipment 212 c 22 ( bot.tan line el+0.000 from skirt to column shell elevation el+11.950 ) as per the specification given below: insulation type: ih ( rockwool ) . ( insulation thickness 60 mm ) , supply and fixing of medium velocity water spray nozzles forpumps, equipment & columns as per the fw mvws network system. ( note:this scope of supply / work is applicable for below sl.nos:361 to 364 ) , mvws spray nozzle 1 / 2 npt male. k factor : 64. cone angle 120 deg. flow cap. 90.5 lpm for de isohexanizer air condensor moc:ss 304 , mvws spray nozzle 1 / 2 npt male. k factor : 18. cone angle 120 deg. flow cap. 25.5 lpm for centrifugal pumps moc:ss 304 , mvws spray nozzle 1 / 2 npt male. k factor : 21. cone angle 120 deg. flow cap. 29.7 lpm for centrifugal pumps moc:ss 304 , mvws spray nozzle 1 / 2 npt male. k factor : 53.04. cone angle 120 deg. flow cap. 75.0 lpm for column 212 c 22 moc:ss 304 , scaffolding: , supply & erection of cup lock typescaffolding up to 10 mtr height as and when where ever required to perform the work & inspection along with aluminium ladder for safe access to the required elevation and scaffolding shall be dismantled after performing the work as per the instruction of engineer in charge. scaffolding should be stiffened with braces, runners, connections wherever required for inspection of the work at required locations with essential safety requirement with ppe for the workmen as per the instruction of eic. rate should be include transporation from contractors storage area to cpcl site and back to contractors place. note : this sor item rate is applicable only for line items wherever the scaffolding work is excluded. , supply & erection of cup lock typescaffolding above 10 mtr height as and when where ever required to perform the work & inspection along with aluminium ladder for safe access to the required elevation and scaffolding shall be dismantled after performing the work as per the instruction of engineer in charge. scaffolding should be stiffened with braces, runners, connections wherever required for inspection of the work at required locations with essential safety requirement with ppe for the workmen as per the instruction of eic. rate should be include transporation from contractors storage area to cpcl site and back to contractors place.note : this sor item rate is applicable only for line items wherever the scaffolding work is excluded. , installation of level gauges on vessels, column, piping, stand pipes, with minor modification whereever required, fabrication and erection of stand pipes, primary piping, drain valve / vent assembly as per the standard darwings and hydraulic testing, installation of gauges, illumininators, non foresting extensions if required but exclusive of supply of gauges, illuminators & impluse piping. note: instrument impluse piping welding, radiography / dp test wherever required shall be paid separately as per the relevant sor items , water flushing / air blowing / steam blowing of existing piping , rate inclusive of required man power, tools & tackles & accessories for water flushing, decokingand steam flushing of various hydro carbon & other pipe lines as per eic instruction. contractor to arrange necessary fire water hoses, steam hoses, water hoses along with chicago couplings, flange connection to connect hoses, air compressor / blowers for air blowing activities. necessary valves, pipes, for the work shall be issued by cpcl at free of cost, water and steam shall be provided by cpcl. ( note:this scope of work is applicable for below sl.nos:371 to 385 ) , water flushing , up to nb 2 inch , nb 2 inch to nb 6 inch , nb 8 inch to nb12 inch , nb 14 inch to nb 24 inch , air blowing / card board blasting , up to nb 2 inch , nb 2 inch to nb 6 inch , nb 8 inch to nb12 inch , nb 14 inch to nb 24 inch , steam blowing , up to nb 2 inch , nb 2 inch to nb 6 inch , nb 8 inch to nb12 inch , nb 14 inch to nb 24 inch , blinding & deblinding , the job include supplying of required quantity of materials like fabricated blinds and gaskets for blinding, etc. and transportation from contractors storage point, loosening and tightening of studs ( cold / gas cutting if required ) , wedge opening, cleaning of flanges, insertion of blinds and removal of blinds and gaskets providing new gaskets after removal of blinds , overhauling of fasteners using oil, replacing the defective studs / nuts to ensure zero leak of joints including hot bolting. new gaskets to be installed after blinding shall be supplied by cpcl.this job also includes supply of all types of tools and tackles, lifting arrangements like chain pulley blocks, suitable slings / belts etc machineries, all consumables and labour to complete the job in all respects, transportation of unused materials to the contractors storagepoint and dumping the generated scrap material to the designated area asper eic instructions. note: 1.supply of temporary blinds shall be in contractor scope and same can be taken back by the contracor after the completion of the job.2.this sor item rate is applicable only for line items wherever the blinding and de blinding work is excluded. , blinding and deblinding of 150# and 300# , blinding and declining sizes up to nb 1.5 inch , blinding and declining sizes nb 2 inch to nb 5 inch , blinding and declining sizes nb 6 inch to nb 10 inch , blinding and declining sizes nb 12 inch to nb 16 inch , blinding and declining sizes nb 18 inch to nb 24 inch , erection of static equipments , air cooled exchangers , transportation of equipment from owners storage point toworksite / contractorsstores. erection, welding & alignmentof cooler steel support structures including any required modification, erection of cooler bundles, plenum assembly & sub assemblies, c frames, operating platforms, stair cases and ladders. erection of fans, motors, gear & bearing assemblies, drive belts, fan gauards etc in complete levelling, aligning, bolting including drilling of bolts the system in line with the existing coolers, cleaningand flushing with water, draining and drying with compressed air, purgingthelinewithair / gas, providingmanpowerfor carrying out trial and start up runs and testing under the supervision / guidance of manufacturer / clients personnel and rectifying defects if any, hydrotesting of tube bundles andprovidingall tools, tackles, necessary scaffoldings for all heights, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects aspercooler vendor drawing no:bgr pbd hex 071200 a 001 ( gad ) , bgr pbd hex 071207 a 000 ( structural gad ) &.bgr ppd afc 0712 ache. ( erection procedure ) , specificationsand instructions of engineer in charge for the following equipmentincludingdrivesandaccessories. , 212 e 24 ( m ) e& f deisohexanizer air cooler @ el+115.000 , erection of column / recators & shell & tube exchangers , transportation including collection of equipment like pressure vessels, reactor, exchangers, columns etc. from owners storage point by raising material issue request / indent using contractors own mobile crane, tractor / trailer. loading of material at owners warehouse / yard, transportation, unloading of material to the work location shown in the equipment layouts or plot plans or contractors storage yard, unloading of equipment at their respective places wherever direct installation is possible, dressing of foundation, providing and placing packings, shims, placing the equipment on foundation, levelling, alignment of equipment with pipe, grouting ( including supplyandapplicationsofgroutmaterial ) , bolt tighting, installation of platform connecting to the equipment and final alignment of equipment, cleaningand flushing with water, draining and drying with compressed air, purgingthelinewithair / gas, getting ibr approval for erection and operation of ibr heat exchangers e 25 & e 206 including arranging the ibr inspection at site and completing the work in all respects as per drawings, technical specifications and instructions of eic. the work shall be in all respects to be carried out in accordance with good present day engineering practice and to the satisfaction of eic this job also includes supply of all types of tools and tackles, lifting arrangements like chain pulley blocks, suitable slings / belts etc, necessary scaffoldings for all heights, machineries, all consumables and labour to complete the job in all respects. heavy duty cranes required for erection of equipments with accessories includes in vendor scope.contractors scope is also inclusive of assemblyofparts, subassemblies, body flanges tightening, manway box up, nozzles proving, nozzles box up etc. , 212 e 201 ( n ) hexane product condenser horizontal@ el +115.000 , 212 e 202 ( n ) hexane product trim cooler horizontal@ el 100.000 grade level , 212 e 203 ( n ) hexane product feed bottom exchanger horizontal@ el 100.000 grade level , 212 e 204 ( n ) hexane feed heater double pipe horizontal@ el +107.500 , 212 e 205 ( n ) hexane product stabilizer overhead condenser horizontal @ el +122.000 , 212 e 206 ( n ) hexne product stabilizer reboiler vertical@ el 100.000 grade level , 212 e 207 ( n ) hexane product feed effluent exchanger horizontal @ el 107.500 , 212 c 201 ( n ) column with skirt support : hexane product stabilizer @ el 100.00 grade level , 212 c 202 ( n ) vessel with saddle support : hexane product reflux drum@ el 107.200 , 212 c 203 ( n ) vessel with saddle support : hexane product stabilizer overhead receiver@ el+115.000 , 212 r 201 a vertical reactor with leg supports : hexane product benzene saturation reactor@ el 100.00 grade level , 212 r 201 b vertical reactor with leg supports : hexane product benzene saturation reactor @ el 100.00 grade level , 212 mx 201 ( n ) hexane feed static mixer@ el 107.200 , 212 e 25 ( r ) deisohexanizer reboiler horizontal@ el + 105.025 ( erection during shutdown ) , erection of 212 c 22 ( r ) , transportation of column from unloaded location to worksite, erection of column 212 c 22 ( r ) bottom piece ( column supplied in two pieces ) on the foundation, aligning, verticalitychecking, grouting, tighteningof foundationbolts, weldingof washer on anchor chairs, including chipping&dressingoffoundations, grouting ( including supply and application of non shrink grout material ) . at most care to be taken during erection such that foundation bolts are not damaged.if damaged shall be corrected and replaced by the contractor. , erection of column 212 c 22 ( r ) top piece over the bottom piece ( already erected on the foundation ) , checking vertical alignment, field weld joint fit up and welding between top & bottom piece, welding of divided wall between top & bottom shell, ndt ( rt & dpt ) , local box hydro testing ( hydrotesting box shall be prepared by the contractor before start of shutdown ) , upon completion of local hydro test, cleaning bycompressedair, nozzle proving and offering for inspections under the supervision / guidance of manufacturer / clients personnel, providingall tools, tackles, necessary scaffoldings for all heights, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per column drawing no:gefl cpcl 122 1, equipmentdetail, specifications, detailed installation procedures as per the mr.21046 kavin m sor 0504and instructions of the engineer in charge. note:the mechanical contractor shall be dress up the column with circular platforms and ladders before the erection.scope includes mobilization of minimum 500 mt capacity crane for the erection of the column and suitable capacity crane for tailing purpose during lifting. , 212 c 22 ( r ) : deisohexanizer od 2.768 mtr x overall length 63.200 mtr ( erection during shutdown ) , installation of new pumps , transportationof pumpswith electric motor drive &associated accessoriesfrom owners storage points to work site / contractors stores, assembly of sub assemblies, placing theequipmentsonfoundations, erectionof seal plan piping as applicable, levelling, aligning, including chipping&dressingoffoundations, grouting ( including supply and application of non shrink grout material ) , and providingmanpowerfor carrying out trial and start up runs and testing under the supervision / guidance of manufacturer / clients personnel and rectifying defects if any and providingall tools, tackles, scaffoldings for all heights, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, providing assistance to oem with necessary manpower and mill wright fitter etc. to complete the work in all respects as per drawings, specificationandinstructions of engineer in charge. , 212 g 201 ( n ) a : hexane product reflux pump ( approximate weight of the assembly =1.750mt ) , 212 g 201 ( n ) b : hexane product reflux pump ( approximate weight of the assembly =1.750mt ) , 212 g 202 ( n ) a : pump around pump ( approximate weight of the assembly =1.435 mt ) , 212 g 202 ( n ) b : pump around pump ( approximate weight of the assembly=1.435 mt ) , 212 g 203 ( n ) a : hexane product pump ( approximate weight of the assembly =4 mt ) , 212 g 203 ( n ) b : hexane product pump ( approximate weight of the pump assembly =4 mt ) , 212 g 204 ( n ) a : stabilizer reflux pump ( approximate weight of the pump assembly =1.87 mt ) , 212 g 204 ( n ) b : stabilizer reflux pump ( approximate weight of the pump assembly =1.87 mt ) , 212 g 205 ( n ) a : cooling water booster pump ( approximate weight of the pump assembly =1.5 mt ) , 212 g 205 ( n ) b : cooling water booster pump ( approximate weight of the pump assembly =1.5 mt ) , 320 g 423 ( n ) a : pgh transfer pump ( off site ) ( approximate weight of the pump assembly =1.650 mt ) , 320 g 423 ( n ) b : pgh transfer pump ( off site ) ( approximate weight of the pump assembly =1.650 mt ) , modification / revamping of existing pumps during shut down , 212 g 015 a / b modification of existing recycle pumps replacment of new impellers, wear rings, bearings and associated parts. scope includes, transportation of the new impllers and associated parts from cpcl stores, blinding and disconnecting the pumps suction and discharge pieplines and utility lines, drain piping system, de coupling / dismantling of pump casing and shifting to workshop, removal of existing impellers, wear rings, bearings and associated impeller parts, gaskets etc and installation of newly supplied impllers, wear rings, bearingsand associated parts gakets etc, shifting back the pump casing to pump location, alignment, coupling and boxing of pump casings, de blinding as per the replacement pocedure issued by the pump vendor, trail run testing of pumps, installation of suction, discharge, drain piping system back to position and under the supervision ofpump vendor and engineer in charge. the scope also includes providing assistance to oem with necessary manpower and mill wright fitter.scope also includes retuning of the dismantled impellers, wear rings etc back to cpcl stores. , 212 g 017 a / b modification of existing deisohexanizer reflux pumps replacment of new impellers, wear rings, casing rings, bearings, 75 kw motors new couplings and canaopy etc.. scope includes, transportation of the new impellers, wear rings, casing rings, new motors, coupling and associated parts from cpcl stores, blinding and disconnecting the pumps suction and discharge pipelines and utility pipelines, drain piping system, de coupling and dismantling of existing motors, pump casing and shifting the pump casing to cpcl workshop, removal of existing impellers, wear rings, casing rings, bearings and associated impller parts, gaskets etc and installation of newly supplied impellers, wear rings, bearingsand associated parts, gakets etc, , boxing of pump casings and shifting to pump location, chipping off existing frame, carrying out base frame modification as per drawing no:fpd bpd ms2261013 01, installation of new motors, supply and installation of grouting, coupling of pumps with motors, alignment as per the replacment pocedure issued by the pump vendor, trail run testing of pumps, de blinding and installation of suction and discharge pipelines, utility pipelines, drain piping system back to position and under the supervision ofpump vendor and engineer in charge.the scope also includes providing assistance to oem with necessary manpower and mill wright fitter.scope also includes retuning of all the dismantled impellers, wear rings, motors, couplings etc back to cpcl stores.. , 212 g 018 a / b modification of existing light isomerate pumps replacment of new impellers, wear rings, shaft, bearings and associated parts. scope includes, transportation of the new impllers and associated parts from cpcl stores, blinding and disconnecting the pumps suction and discharge pieplines and utility lines, drain piping system, de coupling / dismantling of pump casing and shifting to workshop, removal of existing impellers, wear rings, bearings and associated impeller parts, gaskets etc and installation of newly supplied impllers, wear rings, bearingsand associated parts gakets etc, shifting back the pump casing to pump location, alignment, coupling and boxing of pump casings, de blinding as per the replacement pocedure issued by the pump vendor, trail run testing of pumps, installation of suction, discharge, drain piping system back to position and under the supervision ofpump vendor and engineer in charge.the scope also includes providing assistance to oem with necessary manpower and mill wright fitter. scope also includes retuning of the dismantled impellers, wear rings etc back to cpcl stores. , structural platforms ( circular / rectangular ) , stair case, hand rails, vertical cage ladders, steel hot dipped galvanized gratings, stair treads for column, reactors, pressure vessels, drums etc scope includes, supply of steels, gratings, hand rails, shop fabrication, welding and shop painting, shifting to site, site eretion, bolting, welding on respective columns, reactors, pressure vessels, drums etc as per the drawings & specifications, including providingall tools, tackles, necessary scaffoldings for all heights, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipmentdetail, specificationsand instructions of the engineer in charge. column 212 c 22 ( r ) , 212 c 201, 212 c 202, 212 c 203, reactors 212 r 201 a / b.note:the scope is inclusive of supply and application of paints for sturcturals as per specification no:21046 kavin pe sp 0702. , structural steel shall be grade e250 quality br conforming to is: 2062. for platforms & support structures , electro forged hot dipped galvanized ms gratings confirming to type ii gratings std 7 68 0697 , dismantling of equipment , during shut down , dismantling of shell & tube exchanger from the existing foundation after removal of the existing inter connected piping, instruments, valves associated with the exchanger by making the equipment free from all the attachment and deliver to client storage point under the supervision / guidance of manufacturer / clients personnel, providingall tools, tackles, necessary scaffoldings for all heights, machinery, consumables, transportation equipment, dismantling equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipmentdetail, specificationsand instructions of the engineer in charge. , 212 e 25 existing shell & tube exchangers @ el 105.025 , dismantling of deisohexanizer column 212 c 22 , the scope includes steaming to remove hydrocarbon, opening of column manway and providing steam ejector, removal of column internals including trays, down commers & raisers etc ( only removal of internals in the top section of the column ) , removal of column platforms, ladders, light fittings, . removal of column cladding / insulation, providing necessary blinds & cutting and dismantling of existing inter connected pipelines upto 5 mts from the column shell to facilitate removal of column, removal of instruments, valves associated with the existing column, removal of fire proofing, welding tailing lug for top portion ( from plate supplied by cpcl ) cutting and removal of top column piece, welding lifting lugs ( from plate supplied by cpcl ) for bottom portions, lifting of bottom portion from the existing foundation ( at most care to be taken during dismantling such that foundation bolts are not damaged.if damaged shall be corrected and replaced by the contractor. ) , arranging temporary saddles for resting the dismantled column at floor level ( temporary saddles shall be fabricated by the contractor from plate supplied by cpcl, shifting the dismantled column pieces to the designated storage area by using trailers.supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, suitable slings / belts, etc., necessary scaffoldings for all heights, machineries including dismantling & transportation equipments like tractor, trailor, cranes of required capacity for lifting & tailing at loading and at unloading yard, all consumables, labour, instruments, ancillary etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the engineer in charge shall be in contractors scope .dismantling shall be carried out by cutting the column in max two ( 2 ) pieces after removal of all column internals, under the supervision / guidance of / clients personnel, and deliver to client storage point.note:marking for cutting the column shall be as per instructions of cpcl and column pieces after cutting shall be properly stored in client storage point as per instructions of cpcl. , deisohexanizer column 212 c 22 dismantling including trays & platform structures, ladders etc , installation of equipment internals: , installation of 212 c 22 internals , the scope includes 1.transportation of internals including trays, down commers , raisers, internal feed pipes, vapor splitter.liquid splitters, baffles etc from owners storage point to the erection site and storing the same near erection site. 2.opening up all the manways, providing the steam eductors for entry and working inside column. 3.supply of scaffolding pipes, rope / steel ladders and clamps etc, . and installation of scafolding inside column below tray no. 1 to the bottom dish end. 4.providing necessary lighting, manual cleaning the column including entire shell, nozzle, manways etc to the satisfaction of eic, providing man power assistance for additional cleaning as required. 5.installation of trays assembly, vapour splitters, liquid splitter, baffles, internal feed pipes, baffles etc as per drawing no:kg00062834 001, 3, 5, 7, 8, 9, 10, 11, 12, 14, 15, 17, 19 and 22. 6.opening and closing of tray manways and divided wall manways as and when required. 7.providing skilled manpower assistance for cpcl inspection. 8.carrying out leak test for seal pan, offering for final inspection.all required works need to be carried out during leak test including installation of gasket. 9.nozzle flushing and proving as per manufacturing requirements 10.carrying the boxup of all tray manways from top to bottom, removal of scaffolding pipes, removal of lights, ladder, ejectors etc, and boxing up of divided wall and column manways. 11.supply of necessary tools, tackles, safety equipments for operator, machineries, all consumables, labour, instruments, ancillary etc to complete the work in all respects as per drawings, specifications and instructions of the engineer in charge shall be in contractors scope. , loading of catalyst.in reactors 212 r 201 a / b and installation of reactors internals 212 r 201 ( n ) a / b: inlet collector, outlet baffle & sample probe, wire mesh, hold down gratings & other internals transportation of catalyst ( ni catalyst kl6516 cy 1.2 ) & inert balls ( kl5850 sh 1 / 4 ) from owners stores, providing temporary cover for storing catalyst drums / bags at site, loading of catalyst & inert balls as per loading scheme / drawing issued by cpcl including supply of machinery for loading.scope includes positive isolation / blinding of reactors connected piping, opening of top man way / top dish cover, after catalyst loading & inspection, boxing up of man way / top dish cover, area cleaning & returning unused catalyst & inert balls and empty bags / drums to owners stores. the scope also includes transportation of reactor internals including inlet collector, outlet baffle and sample probes, wire mesh, hold down gratings & other internals from owners storage yard to the erection site, storing the same near erection site, installation of inlet collector, outlet baffle, sample probes, wire mesh, hold down gratings & other internals, supply of all materials, tools, tackles, safety equipments for operator etc, supply of required skilled / experienced personnel, including necessary scaffolding inside the reactors, providing lighting inside the reactor, inside cleaning of reactor including entire shell, nozzle, distributors etc to the satisfaction of eic. providing man power assistance for additional cleaning as required, removal of body flanges as required to facilitate installation of internals, installation of temporary structures / platforms for inlet collector, outlet baffle and sample probes, carrying out leak tests, removal of temporary structures / platforms and completing the work in all respect as per instructions of engineer in charge. the work shall be done to the complete satisfaction of engineer in charge under supervision of representative of owner and internals supplier. note: all equipments, tools, tackles, temporary structures etc. required for installation is in bidders scope except inlet collector, outlet baffle, wire mesh, hold down gratings and sample probes which shall be supplied by owner as free issue. for more details referrespective mechanical datasheet ( attached with the tender ) . , installation of bayonet distributor, liquid distributor, trough distributor & random packings, bed limitedrs, gas injection type support plates & other internals for column [ item no: 212 c 201 ( n ) ] the scope includes 1.transportation of bayonet distributor, liquid distributor, trough distributor and random packings, bed limiters, gas injection type support plate and other internals supplied in loose by column vendorfrom owners storage yard to the erection site, storing the same near erection site 2.providing necessary scaffolding, all eductors, rope ladders, lighting as required 3.dismantling flanged segments at elevation 7m , 13m and as required to facilitate cleaning installation of internals. 4.inside cleaning of column including entire shell, nozzle, distributors etc, to the satisfaction of eic. providing man power assistance for additional cleaning as required 5.installation of bayonet distributor, liquid distributor, trough distributor and random packings etc. 6.offering of final inspection by cpcl. 7.re erection of flanged segments after the installation of internals and random packings. 8.contractor shall provide manpower as and when required as directed by eic for the above works. supply of all materials, tools, tackles, safety equipments for operator etc, supply of required skilled / experienced personnel for inspection of cpcl etc, installation of temporary structures / platforms for bayonet distributor, liquid distributor, trough distributor and random packings, carrying out leak tests, removal of temporary structures / platforms and completing the work in all respect as per instructions of engineer in charge. the work shall be done to the complete satisfaction of engineer in charge under supervision of representative of owner and internals supplier.note: all equipments, tools, tackles, temporary structures etc. required for installation is in bidders scope except bayonet distributor, liquid distributor, trough distributor and random packings which shall be supplied by owner as free issue. for more details referrespective mechanical datasheet ( attached with the tender ) . note:column c 201 is consists of 5 sections each connected with bolted body flanges. contractor to arrange suitable crane for loading the internals inside the column and to dismantle each sections, after loading inernals, each sections to be bolted back in position as per the instruction of engineer in charge. , hydrotesting of heat exchangers at site , supply of accessories such as hydro testingpumps, instruments, blind flanges, fasteners, gaskets, etc, fixing all blind covers, proving temporary saffolding / platform, conducting shell side hydro test of complete exchanger for the following equipment as per engineering datasheet and code to the complete satisfaction of engineer incharge / certifying agency and dry out of equipment and clearing the areas per instructions of eic.construction / dm water shall be supplied by the client as indicated else where in the tender. any distribution from the point of supply tothe testing area shall be in contractors scope. , tube side hydrotest for heat exchangers , shell / back shell side hydortest for heat exchangers...
37837613 supply, installation testing and commissioning of integrated power supply ( ips ) system smps based up to 4 lines in re area confirming to rdso specification no. rdso / spn / 165 / 2012 version 3.0 with latest amendment and configuration as per enclosed annexure i & ii, list of spares enclosed as per annexure iv, including power supply module for axle counter ( bpac ) , data logger and with ei module. ips should be supplied with 60 nos of 2v 200 ah lmla battery, along with 16 sq.mm cable for ips battery 20 mtrs, asm panel : 50 mtrs and data logger 50 mtrs required, firm will commission the same with minimum one month prior notice period. 1 ) installation, testing and commissioning shall be done as per rdso guidelines by oem. 2 ) earthing, aluminum ladders, power board and outgoing load cables is not in oem scope ( i.e. not in our scope ) [ warranty period: 30 months after the date of delivery ] ...
37701142 aluminum ladders supply of aluminum ladders , aluminum double sided a type ladder, height 11 foot , aluminum self supporting ladders, height 16 foot , aluminum wall supporting ladders, height 20 foot...
37629338 supply of aluminum ladder , aluminum ladder , 20 feet aluminum ladder ( heavy duty) , 12 feet aluminum ladder (heavy duty) , youngman frp extension ladder 8x2 20x24, type step ladder...
37248472 bids are invited for repair of furniture etc 1 26 wooden box type cot with one shirt hanger box at head rest portion, size 7.5ft x 3.5ft at kalyanamandapam , double king size cot of size 6.5ft x 6 ft at kalyanamandapam , cupboards wooden size 6.5ft x 3.5ft x 1.75ft with 3 shelves and 2 drawers, at kalyanamandapam , luggage rack wooden 2.25ft x 1.25ft x 2.25ft at kalyanamadapam , t.v stand with 2 drawer of size 3.5ft x 2ft x 2.5ft t.w at kalyanamadapam , dressing table with mirror provided with one drawer and one pullout cushioned stool of size 6.5ft x 1.75ft , kalyanamadapam , single cushioned chair teek wood, at kalyanamadapam , 2 seater wooden sofa set with seat and back cushioned seat 4 inch and back 3 inch, kalyanamadapam , single seater wooden sofa set with seat and back cushioned seat 4 inch and back 3 inch, kalyanamadapam , cupboard steel 6.5ft x 3ft x 1.25ft , at transit accommodation. , cupboard steel 6.5ft x 3ft x 1.25ft, at transit accommodation. , single plain wooden cot, size 6.5ft x3ft located at transit accommodation , single plain wooden cot, size 6.5ft x3ftx1.5ft located at transit accommodation , wheel mounted 5 step aluminium ladder of size 5.5 ft height, 2ft width, 3 ft depth , 4 side covered push cart trolley of size 3ft height, 2ft width, 3 ft depth , plain push cart trolley of size 3ft height, 3ft width, 4 ft depth , slotted angle ms rack with 4 shelves. size 5ft height, 3ft width, 1.5ft depth , 2 seater wooden sofa_commercial dept. , single seater wooden sofa_commercial dept. , three seater sofa_apm office total quantity : 271...
36932217 supply of public health materials annual tender road cleaning brush with handle ( small 12 ) , road cleaning brush without handle ( small 12 ) , leather hand gloves 14, electrical hand gloves 14, safety gum boot 14, rain coat police type ( length type ) , face mask normal range plastic model, reflective jacket normal, pvc yellow nap helmet, fiber mug, toilet cleaning brush plastic type, hdpe plastic bin white or green or black 10 litter, hdpe plastic bin white or green or black 20 litter, plastic dust bin 40 litter, full face mask with chlorine cartridges, venus respirator with chlorine cartridges, breathing apparatus saviour 30 minutes, breathing apparatus saviour 45 minutes, fire extinguisher abc tyre 2 kg, fire extinguisher abc tyre 5 kg, fire extinguisher abc tyre 10 kg, corner guards spring posts, steel ladder above 4 ft & any size, aluminium ladder above 4 ft & any size, bamboo ladder above 8 ft & any size, steel ladder above 4 ft & any size, 3 wheeler vehicle tyre, 4 wheeler vehicle tyre & any vehicle tyre...
36291137 offsite corridor improvement works ( gr b ) at cpcl manali, refinery chennai 600068 , part a general works , part a general works , erection & dismantling of steel scaffoldingjob involves erection of scaffolding at the required locations using 1 1 / 2 inch dia steel tubular pipes with suitable clamping arrangement, providing wooden planks / steel gratings at the required locations firmly tied on to the scaffolding pipes, removal of the wooden planks / steel gratings & scaffolding materials on completion of the job.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, all consumables and labour to complete the job in all respects, collection & transportation of steel scaffolding materials & wooden planks / steel gratings from the contractors storage point to the work site and back to contractors storage point. , erection & dismantling base reference upto 5 mtr elevation from ground level ( external ) , erection & dismantling upto 10 mtr height of scaffolding ( external ) . scaffolding material will be given by cpcl, on free of cost only if available. , erection & dismantling above 10 mtr and upto 20 mtr height of scaffolding ( external ) scaffolding material will be given by cpcl on free of cost , only if available. , note for sor sl.no.: 1: ( 1 ) for measurement, the scaffolding height shall be measured from the erected base level upto the top plank reference or the top horizontal poles. ( 2 ) in case of either one of the activity like erection or dismantling arise, 60% of the applicable rate shall be paid for erection of scaffolding work & 40% of the applicable rate shall be paid for dismantling work. ( 3 ) the scaffolding materials shall be supplied by contractor on hire basis. however transportation of scaffolding materials from contractors storage point to site and its return to same location after completion of the work is under contractors scope. the charges for transportation is included in the sor and no separate payment is applicable. , supply of steel scaffolding pipes, clamps and gratings on hire basis the contractors scope involves mobilising 1.5 dia steel scaffolding pipes of different lengths, clamps ( both fixed and rolling ) , steel gratings and aluminium ladders on hire basis to cpcl site for erection of scaffolding at required locations. the contractor shall mobilise materials of good quality and paint their materials for easy identification. payment will be made on per day basis for individual items, from the date of erection to date of dismantling, which shall be duly certified by eics based on the material in pass and out pass details and its actual usages.payment will not be given for keeping the material inside the refinery premises without the instruction of eic / job requirement.the contractor shall maintain a stock of certain quantity of all materials to take up scaffolding arrangement jobs immediately upon instruction of eic , supply of 6m scaffolding pipes , supply of 3m scaffolding pipes , supply of 2m scaffolding pipes , supply of fixed clamps , supply of rolling clamps , supply of base plate on hire basis , supply of metel gratings / jolly , supply ofaluminium ladders ( 6m ) , note for sor sl.no: 1.2: ( 1 ) for erection and dismantling payment will be given based on the respective previous sors. ( 2 ) the unit rate shall be rate / scaffolding material / 24 hrs. ( 3 ) quantity of pipes / clamps shall be calculated as per below: if 6 mter pipe of 20 nos is used for 20 days. the quantity will be calculated as follow : 20 x 20 = 400 nos ( quantity ) . ifthe hire rate of 6 meter scaffolding / pipe / 24 hours isx , then the total amount will be 400 x , pipe clampsfixing fixing of clamps to arrest pipe line leaksthe job also includes supplying of all types of tools & tackles, machineries, all consumables, shifting of pipe clamps to leaking locations, collection of fasteners, gaskets etc from owners storage point to siteand all labour to complete the job in all respects as per eic instructions and inspection requirements. , pipe clamps size upto5 inch dia. , pipe clamps size 6 inch dia. to 10 inch dia. , pipe clamps size 12 inch dia. to 16 inch dia. , pipe clamps size 18 inch dia. to 24 inch dia. , pipe clamps size 26 inch dia. to 30 inch dia. , pipe clamps sizeabove 32 inch dia. , note for sor sl.no:2: ( 1 ) nominal diameter of the pipe shall be taken for all measurements. , blinding and de blindingthe job includes collection & transportation of required quantity of materials like blinds, gaskets, fasteners, etc., from owners storage point, loosening & tightening of studs ( cold / gas cutting if required ) , wedge opening, cleaning of flanges, insertions andremoval of blind & gaskets, providing new gaskets after removal of blinds, overhauling of fasteners using oil, replacing the defective studs / nuts to ensure zero leak of joints including hot bolting.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, transportation of unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , blinding for 150# & 300# ratings ( all elevation ) : , blinding size upto1 1 / 2 inch dia. , blinding size 2 inch dia. to 5 inch dia. , blinding size 6 inch dia. to 10 inch dia. , blinding size 12 inch dia. to 16 inch dia. , blinding size 18 inch dia. to 24 inch dia. , blinding size 26 inch dia. to 30 inch dia. , blinding size 32 inch dia.and above , de blinding for 150# & 300# ratings ( all elevation ) : , deblinding size upto1 1 / 2 inch dia. , deblinding size 2 inch dia. to 5 inch dia. , deblinding size 6 inch dia. to 10 inch dia. , deblinding size 12 inch dia. to 16 inch dia. , deblinding size 18 inch dia. to 24 inch dia. , deblinding size 26 inch dia. to 30 inch dia. , deblinding size 32 inch dia. and above. , note for sor sl.no:3: ( 1 ) nominal diameter of the flanges shall be taken for all measurements. , changing / replacement of flange gasketsthe job includes collection & transporatation of required quantity of materials like gaskets, fasteners, etc., from owners storage point, changing / replacement of flange gaskets in pipelines, valves, all types of equipments at all elevations including loosening & tightening of studs ( cold / gas cutting if required ) , wedge opening, cleaning of flanges, overhauling of fasteners using oil, replacing the defective studs / nuts to ensure zero leak of joints including hot bolting.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, transportation of unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , flange gaskets 150# & 300# ratings: , replacement of gaskets size upto 1 1 / 2 inch dia. , replacement of gaskets size 2 inch dia. to 5 inch dia. , replacement of gaskets size 6 inch dia. to 10 inch dia. , replacement of gaskets size 12 inch dia. to 16 inch dia. , replacement of gaskets size 18 inch dia. to 24 inch dia. , replacement of gaskets size 26 inch dia. to 30 inch dia. , replacement of gaskets size 32 inch dia.and above. , removal / installation / refixing of flanged valves ( valve rating 150# & 300# ) , removal of flanged valves ( other than safety valves ) the job includes removal of flanged valves at all grades & elevations by de bolting / cold cutting / gas cutting and transportation of the valve to the maintenance valve shop or any other designated place inside the refinery premises for repair / disposal.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, dumping the generated scrap material to the designated area, all consumables and labour to complete the job in all respects. , removal of valves size 2 inch dia. to 3 inch dia. , removal of valves size 4 inch dia. to 6 inch dia. , removal of valves size 8 inch dia. to 10 inch dia. , removal of valves size 12 inch dia. to 14 inch dia. , removal of valves size 16 inch dia. to 18 inch dia. , removal of valves size 20 inch dia. to 24 inch dia. , removal of valves size 26 inch dia. to 28 inch dia. , removal of valves size 30 inch dia. to 32 inch dia. , installation of flanged valves ( other than safety valves ) , ( valve rating 150# & 300# ) the job includes transportation of valves, gaskets, fasteners, etc., from the owners storage point or valve maintenance shop, cleaning, checking, tightening the gland, greasing & freeing up etc., servicing of all the fasteners using oil, replacing with new fasteners wherever required, hydrotesting the valve if required, at the specified pressure at valve maintenance shop, installation of flanged valve at all heights & grades using proper gaskets & studs.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, dumping the generated scrap material to the designated area, all consumables and labour to complete the job in all respects. , installation of valves size 2 inch dia. to 3 inch dia. , installation of valves size 4 inch dia. to 6 inch dia. , installation of valves size 8 inch dia. to 10 inch dia. , installation of valves size 12 inch dia. to 14 inch dia. , installation of valves size 16 inch dia. to 18 inch dia. , installation of valves size 20 inch dia. to 24 inch dia. , installation of valves size 26 inch dia. to 28 inch dia. , installation of valves size 30 inch dia. to 32 inch dia. , removal & refixing of flanged safety valves ( in mounded bullets and other areas ) the job includes removal of flanged safety valves at all grades & elevations by de bolting / cold cutting / gas cutting, providing a temporary blind flange at the inlet & outlet of safety valve, providing identification mark on the safety valve with a tag and transportation of the valve to the maintenance valve shop for servicing / testing. the job also includes transportation of safety valves from maintenance valve shop after servicing & testing, servicing of all the fasteners using oil, replacing with new fasteners wherever required, installation of the safety valve at all heights & grades using proper gaskets & studs. the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, transportation of required materials like gaskets & fasteners from owners storage point, transportation of unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , upto 15 metres elevation from ground level ( valve rating :150# &300# ) , removal & re fixing of safety / relief valves size upto 3 inch dia. , removal & re fixing of safety / relief valves size above 3 inch dia. & upto 6 inch dia. , above 15 metres elevation from ground level ( valve rating :150# &300# ) , removal & re fixing of safety / relief valves size upto 3 inch dia. , removal & re fixing of safety / relief valves size above 3 inch dia. & upto 6 inch dia. , note for sor sl.no:6: ( 1 ) for measurement purpose, inlet size of the safety valve shall be taken as reference. ( 2 ) servicing & testing of safety valves shall be done by cpcl , plate rolling the job includes spreading the required plate for marking, cutting, marking of plates, edge preparation, chipping, shifting of plate to rolling machine, rolling of plates including transportation and shifting of rolled plates to work site. the job also includes supplying of all types of tools & tackles, m achineries, all consumables and labour to complete the job in all respects, transportation of unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , plate rolling cs / as upto 1500 mm dia , plate rolling carbon steel / alloy steel upto 10 mm thickness , plate rolling cs / as above 1500 mm dia , plate rolling carbon steel / alloy steel upto 10 mm thickness , note for sor sl.no:7: ( 1 ) the contractor can have the rolling facility made available inside the refinery premises or shall get the job done through his sub contractor outside the refinery premises. ( 2 ) the finished rolled plate dimensions shall be taken for measurement purposes ( 3 ) cutting of plates on sides after rolling is included in the above scope of work and there is no additional payment. however, rates for cutting shall be paid additionally, in case the required size of plates are cut from a bigger size plate provided by cpcl. , pipelines hydrotesting / pneumatic testing using contractors power, electrical driven hydraulic pump / using contractors compressor. the job involves hydrotesting / pneumatic testing of pipelines to the specified test pressure at all elevations by providing necessary hose connections from the source of water / air supply to the work location for preparing the test, flushing, filling up water / air on the piping circuit, vent entrapped air, pressurize to the required hydro test / pneumatic test pressure with necessary test pumps, and offer for inspection including access & assistance to cpcl inspection team during the checking, draining & drying of the piping circuit.the job also includes supplying of all types of tools & tackles, suitable test pumps, pressure gauges, machineries, all consumables and labour to complete the job in all respects. , upto 2 dia , 2.5 dia 6 dia , 8 dia & 10 dia , 12 dia 16 dia , 18 dia 24 dia , 26 dia 30 dia , note for sor sl.no:8: ( 1 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. ( 2 ) for blinding & deblinding wherever involved, rates shall be paid separately as per applicable sor. ( 3 ) mobilisation of required electric hydraulictest pumps / hand hydraulic test pumps are under contractors scope. ( 4 ) in case of any pneumatic testing requirement for piping system, required compressors will be provided by cpcl at free of cost , old line water flushing, air blowing and steamingwith supply of fw hoses, steam hoses, water hoses etc. for carrying out hot works in the piping system. uitility air, water & steam will be provided by cpcl. mobilisation of compressor if required is under contractors scope.rates are inclusive of labour and supply of tools and tackles for water flushing and air blowing of various hydrocarbon and other pipe lines as directed by eic, contractor shall supplyfire water hoses, steam hoses, water hoses etc.along with chicago couplings and similar fittings required to connect the hoses for successful completion of the work. any required valves, pipes etcfor this work will be provided by cpcl free of cost. , 2 dia 6 dia , 8 dia 12 dia , 14 dia 24 dia , 26 dia 30 dia , note for sor sl.no:9: ( 1 ) the above flushing rates are considered for preparation of hot works. ( 2 ) it the above flushing activities are done for preparation of cold works, cold cutting etc., then 60% of the unit rate will be considered for payment. all other terms pertaining to scope remains unaltered. ( 3 ) for compressed air flushing of lube / asphalt piping etc., required compressors shall be mobilised by the contractor including all consumables and operator. , dismantling & removal of piping using contractors power source the job involves removal of existing above ground, under ground, overhead insulated or uninsulated or steam traced piping including all types of fittings like elbows / tees / reducers, etc., flanges, all types of instruments, supports by coldcutting / gas cutting / grinding, etc., at all locations at all grades & elevations without damaging any other portion of the existing unit, lowering down the same to ground level, transportation of the same to the designated area as per the instructions of engineer in charge. if insulation is required to be removed from the pipes before dismantling that will be done by contractor and rates are included in this sor.valves removed and shifted to designated locations shall be paid seperately as per applicable sor.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects. , dismantling & removal of piping carbon steel / alloy steel using contractors power source , dismantling & removal of piping carbon steel / alloy steelby hot means , dismantling & removal of piping carbon steel / alloy steelby cold cutting using power hacksaw , note for sor sl.no:10: ( 1 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. , dismantling & removal of structurals / gratings ( all elevation ) using contractors power sourcethe job involves removal of existing above ground, overhead structurals including platforms, ladders, gi & steel gratings by unfastening / coldcutting / gas cutting / grinding, etc., from various locations at all grades & elevations without damaging any other portion of the existing unit, lowering down the same to ground level, transportation of the same to the designated area or scrap yard as per the instructions of engineer in charge including weighment of the material at the appropriate place within the refinery premises, if required.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects. , dismantling & removal of structurals / gratings , note for sor sl.no:11: ( 1 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. , hot bending of pipelines carbon steel / alloy steel :the job includes transporation of all free issue materials from owners storage point to work site, handling at site, cutting, fabrication, laying, bending to the suitable contour as per drawings / as per site requirements, erection of piping separately or as a tracing to the main pipeline or as a coil at all locations above ground level, overhead, over sleepers, piperacks, crossovers, pipe sleeves, trenches, stand posts, connecting with equipments & nozzles at all grades & elevations including under road culverts.the job also includes supplying of all types of tools & tackles, machineries, all consumables including gas and labour to complete the job in all respects, returning back the unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , hot bending of pipe upto 90 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of 1 / 2 inch dia. pipe upto 90 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of 3 / 4 inch dia. pipe upto 90 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of 1 inch dia. pipe upto 90 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of pipe beyond 90 degrees & upto 180 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of 1 / 2 inch dia. pipe beyond 90 degrees & upto 180 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of 3 / 4 inch dia. pipe beyond 90 degrees & upto 180 degrees carbon steel / alloy steel upto sch 160 pipe thick , hot bending of 1 inch dia. pipe beyond 90 degrees & upto 180 degrees carbon steel / alloy steel upto sch 160 pipe thick , cold bending of fire water sprinkler line , cold bending of firewater sprinkler line in tanks / any other equipment to suitable curvature including removal and refixing of firewater sprinker spray nozzles , attending steam leaks by cold works , attending steam leaks by cold works as per the enclosed scope of work ( unit of measurement ea = per leak ) . , radiographythe job includes performing radiography examination of welds on piping & all type of equipments as per relevant asme / astm standards & as per cpcl specification cpcl insp rad 01 at all grades & elevations with film width not less than 4 inches.the job also includes supplying of radiation source camera, other machineries required, all consumables required for filming & developing, transportation of camera, etc., area preparation before starting the job, labour, supervision to complete the job in all respects including preparation of developing chemicals, developing the films & submission of films for inspection review. , pipe weld joints upto 2 nominal dia , pipe weld joints 3 nominal dia , pipe weld joints 4 nominal dia , pipe weld joints 6 nominal dia , weld joint size above 6 nominal dia and weld seams of storage tanks, pressure vessels and plate welds unit ea represents inch length of film. , note for sor sl.no:15: ( 1 ) for pipe weld joints, nominal diameter of the pipe shall be taken for measurement. , earth work excavation & back fillingthe job involves earth work excavation below ground level from 2 metres depthto 4 meters deoth & to a required width for laying underground piping in all types of soils including removal of vegetatio n, if required, dressing of sides, levelling, grading, ramming of bottom, back filling on completion of laying of pipes with available excavated soil, watering, rolling, ramming of by manual methods / mechanical compactors, dressing, trimming, etc. the job also includes supplying of all types of tools and tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , earth work excavation & back filling , shoring and strutting the job involves provision and installation of shoring and strutting in excavations from 2 metres depth to 4 meters depth, dismantling and removal after completion of work as per instruction of engineer in chargethe job also includes supplying of all types of tools & tackles, materials, all consumables and labour to complete the job in all respects as per eic instructions. , shoring and strutting , road cutting the job involves breaking of bituminous road including bituminous carpet, metal base, etc. and removal of debris upto a lead of 3 km as per instruction of engineer in chargethe job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , road cutting , concrete dismantlingthe job involves dismantling of reinforced cement concrete pavements includingcuttingofreinforcement bars, returning of scrapsteelsto designated area, breaking the rcc work into piecesand disposal of unserviceable material upto 3.0km lead as directed , etc. as per the direction of the engineer in charge.the job involves dismantling of plain cement concreteincluding disposal of unserviceable material upto 3.0km lead as directed serviceable materials to stores as per the direction of engineer in chargethe job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , dismantling plain cement concrete ( pcc ) , dismantling reinforced cement concrete ( rcc ) , dewatering with contractors own pump for excavated pit dewatering and culvert dewatering for culvert maintenancethe job involves pumping out of water including dewatering oily water mixed with muck / sludge etc. from trenches, pits etc. by contractors own pump as per the direction of the engineer in charge.the job also includes supplying of all types of pumps, tools & tackles, hoses, fuel, all consumables and labour to complete the job in all respects as per eic instructions. , hire charges for 5 hp diesel driven dewatering pump with all accessories including hoses along with one operator for 8 hrs , hire charges for 5 hp diesel driven dewatering pump with all accessories including hoses along with one operator for 12 hrs , running charges for 5 hp diesel driven dewatering pump , hire charges for 2 hp kerosene driven dewatering pump with all accessories including hoses along with one operator for 8 hrs , hire charges for 2 hp kerosene driven dewatering pump with all accessories including hoses along with one operator for 12 hrs , running charges for 2 hp kerosene driven dewatering pump , charges for mobilisation & demobilisationfor 5 hp diesel driven dewatering pumps ( trip inclusive of both to & fro ) , note for sor no:20: ( 1 ) running charges as per sor sl.nos.20.3 & 20.6 are applicable for the actual running hours of the pump and also if the fuel is supplied by the contractor. ( 2 ) running charges as per sor sl.nos.20.3 & 20.6 are not applicable if the fuel is supplied by cpcl. , supply & installation of coating & wrapping as per the scope of work ( with contractors material ) , corrosion protection tape coating for underground steel pipelines , supply and application of corrosion protection tape coating for underground steel pipelines as per eil specification 6 79 0011 rev.0 , supply and application of coating & wrapping by hot means , culvert slab removal & refixingscope includes chipping of the tar / cement concrete to facilitate removal of all slabs from the culvert.payment will be made based on the number of slabs removed and refixed. rate is inclusive of any chipping activity done between the slabs, removing and refixing of slabs.the chipping activity is expected to cover 40mm thick x 150mm width x length of the slab.any chipping done beyond this stated volume will be paid as per solr for stone cutters deployed for the additional work.the requirement of additional stone cutters will be decided by eic at the time of execution.for regular work it has been estimated that 3 stone cutters will be deployed per culvert , chipping, removal and refixing the slabs inculvertswith contractors crane and labour , inspection & testing , stress relievingthe job involves post weld heat treatment ( pwht ) / stress relieving of carbon steel / alloy steel metal surfaces, weld seams or haz, etc., shop fabricated or site fabricated or existing piping / static equipment at all grades & elevation.the job also includes cleaning the adjoining surfaces, welding of required thermocouples, insulating the portion using super fine glass wool / asbestos tape, heating the metal surface using a induction heating equipment as per the requirement, ensuring uniform temperature attainment at all points, recording the temperatures by means of thermocouples / pyrometer / automatic temperature recorders suitably calibrated, removal of insulation, providing assistance for hardness testing, submitting recorded charts for approval, removal & dressing of thermocouple leads, etc., as per the instructions of eic.the job also includes supplying of all types of tools & tackles, machineries, all consumables, labour & supervision to complete the job in all respects including transportation of all the required materials to the work site. , stress relieving including hardness checking pipe weld joints , note for sor sl.no:23.1: ( 1 ) for pipe weld joints, nominal diameter of the pipe shall be taken for measurement. ( 2 ) for plate weld seams, actual inch length of weld seam shall be taken for measurement. ( 3 ) re stress relieving arised due to improper heating / cooling or any other fault on account of contractor shall be borne by the contractor at his own cost. , buffing, vaccum box / diesel chalk testing using contractors power sourcethe job includes supply of vaccum box facility including vaccum pump, etc., testing the tank roof & bottom plate weld seams & haz areas using vaccum box / soap solution at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables, labour & supervision to complete the job in all respects including transportation of all the required materials to the work site. , buffing , buffing with vacuum box testing of welds / haz , buffing with diesel chalk testing of welds / haz , painting jobs supply and application of paints as per cpcl painting systems painting of all pipelines replaced by the contractor, all new piping installed by the contractor through piping modification jobs, tank maintenance jobs etc., as per instruction of eic.painting jobs withcpcl painting system x for pipelines and structurals.painting shall be done for structurals and pipelinesreplaced / erectedby the zonal contractor only. all surface preparation and paintings shall be offered for cpcl inspection ( stage wise as per inspection ) the job also includes supplying of all types of tools & tackles, machineries, transportation of suitable steel grits, all consumables & labour to complete the job in all respects and dumping the generated scrap material to designated area as per eic instructions. , surface preparation , hand tool cleaning to the requirement of st 2 / sspc sp 2 , power tool cleaning to the requirement of st 3 / sspc sp 3 , primer / intermediate coat , primer : one coat of self priming epoxy paint ( application by brush ) ( dft of 100 microns / coat ) , intermediate : one coat of polyamide cured hb epoxy mio paint ( dft of 75 microns / coat ) , finish paints , finish : acrylic polyeurethene paint rate per coat ( application by brush ) ( dft of 35 microns / coat ) , letter stencilling at pipelines, tanks. equpments at all elevation: , stencilling of letters and numbers sizes upto and including 2 size , stencilling of letters and numbers sizes above 2 upto and including 4 size , stencilling of letters and numbers sizes above 4 upto and including 6 size , stencilling of letters and numbers sizes above 6 upto and including 12 size , stencilling of letters and numbers sizes above 12 upto and including 18 size , stencilling of letters and numbers sizes above 18 upto and including 24 size , colour code banding and arrow direction & product name stenciling as a part of tpm related jobs.superimposing of secondary colour code bands and direction arrow by supply and application of two finish coat of relevant painting system as per the enclosed specification for common colour code idendification system for pipelines, tanks spec. sheet no. cpcl paint colour coding 001 rev.1 dated 01.12.2010 ( 4 pages ) and as per the requirements / instructions of eic. the rate includes surface cleaning also. , superimposing of secondary colour code bands over the existing ground colour after proper cleaning as per the spec. sheet no. cpcl paint colour coding 001 rev.1 dated 01.12.2010 ( 4 pages ) , sl.no.4.0. ( unit of measurement : sqm = rate per square metre ) , superimposing of direction arrow as per the dimensions given in the enclosed spec. sheet no. cpcl paint colour coding 001 rev.1 dated 01.12.2010 ( 4 pages ) , sl.no.4.0. for all sizes of pipelines. ( unit of measurement : ea = rate per each direction arrow ) , piperack cleaning works:scope of work includes removing earth, debris, non metal scraps, vegetation / shrubs, etc., from underneath the piperacks, thorough cleaning, brooming of paved / lined areas underneath piperacks and transporting, disposal ofgenerated earth, debris, non metal scraps, vegetation / shrubs, etc., at designated places within the refinery premises as directed by the engineer in charge including all labour, transportation, tools & tackles, etc., all complete , clearing the area of grass, rank vegetation, wild growth, bushes, treesand plants upto 30 cm girth measured at a height of 1.0m above groundlevel, road side berms, under pipelines and structures, tank farms, drains, yards etc. by removal of grass, plants etc. by scraping completely from ground and making good the area disturbed, collecting all removed vegetation etc. bundling into heaps and disposal at designated locations inside the refinery premises as directed by eic with contractors own transport, all tools, tackles, labour etc. all complete as directed by the engineer in charge for unpaved / earth areas , clearing the area of grass, rank vegetation, wild growth, bushes, treesand plants upto 30 cm girth measured at a height of 1.0m above groundlevel, road side berms, under pipelines and structures, tank farms, drains, yards etc. by removal of grass, plants etc. by scraping completely from ground and making good the area disturbed, collecting all removed vegetation etc. bundling into heaps and disposal at designated locations inside the refinery premises as directed by eic with contractors own transport, all tools, tackles, labour etc. all complete as directed by the engineer in charge for paved / developed areas , scrap removal , charges for collection and removal of all types of metallic scraps from the offsite ( om&s 1 & 2 ) and surrounding area and transporting to scrap yard inside refinery premises after weighment as per scope of work & eics instruction.the contractor’s scope involves mobilizing their own tractor / trailer, hydra crane, forklift, and other equipment, required manpower for collection, spreading the scrap mounds in and around offsite areas, segregating items like ms, ss, aluminium and cables, collection in tractor / trailer, transporting to weigh bridge, weighing and dumping inside scrap yard in coordination with materials department. , charges for collection and removal of all types of metallic scraps from the mtf areaand transporting to scrap yard inside refinery premises after weighment as per scope of work & eics instruction.the contractor’s scope involves mobilizing their own tractor / trailer, hydra crane, forklift, and other equipment, required manpower for collection, spreading the scrap mounds in and around offsite areas, segregating items like ms, ss, aluminium and cables, collection in tractor / trailer, transporting to weigh bridge, weighing and dumping inside scrap yard in coordination with materials department. , note: for sl. no 31 1 ) scrap generated during contractor activities shall be shifted and disposed to designated place as per eic. no seperate payment shall be made for such works & rates are inclusive of scrap removal. , hiring of machineries , hiring of machineriesthe contractor shall mobilise the following equipments for completion of the job in all respects. the contractor shall mobilise the equipment with approval from eic and de mobilise the equipment on completion of the job. if there is any extension ofwork above one day, the contractor shall obtain prior approval from eic for retaining the equipements. quoted rates shall be inclusive of mobilization & de mobilization charges. no separate rates shall be paid for mobilization & demobilization of equipment. entry and exist gate passes including the operators time sheet ( duly signed by cpcl in charge on daily basis ) for all the below mentioned equipments to be enclosed along with bill for processing. the quoted rate is inclusive of charges towardshire charges, consumables fuel / oils / lubricants , operator crews costs, supervision, overhead & profit, safety permits, safety precaution etc. complete. , supply of 20 feet trailer with tractor on hire basis on all working days from monday to saturday on 8 hrs.shift , inclusive of driver, oneassistant , all consumables like diesel etc., with all safety precautionswithin cpcl refinery premises. the quoted rate shouldincludemobilization, operator crews / driver / assistant cost, loading, transporting from site to scrap yard within refinery premises, unloading, labour for loading , supply of front cabin hydra of minimum capacity 12 t on hire basis on all working days from monday to saturday on 8 hrs. shift, inclusive of driver, one assistant, all consumables like diesel etc., withall safety precautions within cpcl refinery premises.the quoted rate should include mobilization, operator crews / driver / assistant cost, loading , transporting, unloading, labour, tools, tackles etc. completeas directedby engineer in charge. , tractor with trolley from monday to saturday on 8 hrs. shift, inclusiveof driver, all consumables like diesel etc., withall safety precautions within cpcl refinery premises.the quoted rate shouldinclude mobilization, operator crews / driver cost, loading, transporting, unloading, tools, tackles etc. completeas directedby engineer in charge. , for wheeled hydralic excavator ( 3d ) with attachements backfill or dozer blades ( 11 to 18 tonnes ) from monday to saturday on 8 hrs. shift, inclusiveof driver, all consumables like diesel etc., withall safety precautions within cpcl refinery premises.the quoted rate shouldinclude mobilization, operator crews / driver cost, loading, transporting, unloading, tools, tackles etc. complete as directed by engineer in charge. , supply of unskilled class labourto carry out petty works not assessable for shifting of oily sludge filled drums in offsiteworks, on day to day basis during the cpcl general shift hours ( 0800 1600 hours ) on all working days from monday to saturday . the rates shall include esi, pf, payroll cost and allowances, fringe benefits, overhead supervision, profits and hand tools. payment for part of the day will be made on prorata basis. , note: for sr. no 32 & 331 ) hiring of machineries & manpower supply is specificallyfor drum shifting, drum disposal & other sundary works which are not covered in sor. 2 ) for all other works for which sor rates are available rates are inclusive of supply of all tools and tackles, machineriesfor completion of work in all respect, no extra payment shall be made through hiring charges. , part b hot works , all welding jobs ( hot work ) shall be done with contractors power by mobilising sufficient quantities of power generatorsinculding supply of diesel and required quantities of welding machines / generators. , carbon steel piping work above ground & under groundthe job includes transporation of all free issue materials from owners storage point to work site, handling at site, cutting, bevelling, fabrication, laying, welding & erection of carbon steel piping at all locations above ground level, overhead, over sleepers, piperacks, crossovers, pipe sleeves, trenches, stand posts, under ground , connecting with equipments & nozzles, providing tappings from the existing pipelines at all grades & elevations including under road culverts.the piping job includes all modification and replacement jobs involving pipes & all types of fittings like elbows / tees / reducers / half coupling / full coupling, etc., all types of flanges like slip on / raised face, etc., all types of inline instruments like rotameter / pressure gauges / thermowells, etc., valves, expansion joints, steam traps, orifice assemblies, strainers, vents, drains, funnels, etc., of different schedules, pressure ratings and for various temperature applicationsthe piping job includes providing shoe supports, pads at support locations, reinforcement pads, etc., wherever required.the job includes flushing, preparing work area for executing hot work, bending to suit the contours wherever required, socket, fillet, butt welding using e 6010 / e 6013 / e 7018 electrodes / er 70s2 filler wire as required, post weld heat treatment ( pwht stress relieving ) after welding wherever required, dpt wherever required, hydraulic / pneumatic test as per codes, specification, drawings and draining of water & drying with compressor air after hydrotest.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, returning back the unused materials to owners storage point and dumping the generated scrap material to the designated area as per eic instructions.the rates for the following items shall be exclusive of blinding & deblinding, radiography, stress relieving, flushing of old piping, pneumatic testing / hydrotesting, reinforcement pad welding, removal of old piping for replacement, concrete / pcc breaking, earthwork removal & back filling, dewatering, shoring & strutting, wrapping & coating and erection & removal of scaffolding.the rates for the following items shall be inclusive of fabrication, laying, erection, welding, providing shoe supports, pads at support locations, flushing of the new piping system, offering stagewise inspection and draining / drying of the piping system after hydrotesting / pneumatic testing.additional rates as per wrapping & coating and fillet welding sor can be claimed for under ground piping wrapping & coating and sleeve pipe end cover plate welding jobs. similarlyfor concrete / pcc breaking, earthwork removal & back filling, dewatering, shoring & strutting and erection & removal of scaffolding can be claimed as per respective sor. , socket welding all elevations , carbon steel socket / fillet welding joint , butt welding all elevation and all thickness using e 6010 / e 6013 / e 7018 electrodes , carbon steel butt welding joint ( root e 6010 / filling e 6013 / e 7018 ) , carbon steel butt welding joint ( root er 70s2 / filling e 7018 ) , note for sor sl.no.: 34: ( 1 ) thickness of piping for measurement shall be based on the relevant ansi or equivalent standards. ( 2 ) the finished weld joint elevation at site shall be taken as reference for measurement, wherever applicable. ( 3 ) the rates for socket & fillet welding in piping shall remain same for all thickness and elevations as per sor. ( 4 ) rate for weld joints of vents & drains shall be paid on actual measurement using the applicable sor. ( 5 ) for reinforcement pad welding, the rates shall be paid separately as per applicable sor. ( 6 ) fabrication & welding of pipe shoe supports & pad at support locations are included in sor and will not be considered for measurement ( 7 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. ( 8 ) for blinding & deblinding wherever involved, rates shall be paid separately as per applicable sor. ( 9 ) in case of replacement of existing piping, rates for removal of old pipelines shall be paid separately as per applicable sor. ( 10 ) for steam tracing piping work, hydraulic testing of piping is not required.service testing shall be done for steam tracing piping.the above rate includes service testing and no separate rate will be paid for service testing.for bending tracer pipelines, the rates shall be paid separately as per applicable sor. ( 11 ) hydrotesting / pneumatic testing & old line flushing of pipe line are not included in sor and rate shall be as per applicable sor. ( 12 ) radiography of weld joints is not included in sor and rate shall be paid separately as per applicable sor. ( 13 ) wrapping & coating of pipelines is not included in the sorand rates shall be paid separately as per applicable sor. ( 14 ) earth work removal and back filling, dewatering, shoring & strutting are not included in sor and rates shall be paid separately as per applicable sor. , carbon steel piping specials like mitre cut bend, reducersthe job includes transporation of all free issue materials from owners storage point to work site, handling at site, cutting, bevelling, fabrication & welding of carbon steel piping specials ( of any thickness ) like 4 element 3 weld type 90° mitre cut bend, 3 element 2 weld type 45° mitre cut bend / reducers, etc., at all locations above ground level, overhead, over sleepers, piperacks, crossovers, pipe sleeves, trenches, stand posts, connecting with equipments & nozzles at all grades & elevations including under road culverts of different schedules, pressure ratings and for various temperature applications.the job includes flushing, preparing work area for executing hot work, bending to suit the contours wherever required, welding using e 6010 / e 6013 / e 7018 electrodes as required, dpt wherever required, hydraulic / pneumatic test as per codes, specification, drawings and draining of water & drying with compressor air after hydrotest.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, returning back the unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions.the rates for the following items shall be exclusive of radiography, stress relieving, hydrotesting, flushing of old piping, welding of vents & drainsand erection & removal of scaffoldingthe rates for the following items shall be inclusive of fabrication, erection and welding, offering stagewise inspection. , mitre bends butt weld joint carbon steel ( all thickness and all elevation ) , mitre bends butt weld joint , reducers butt weld joint carbon steel ( all thickness and all elevation ) , reducers butt weld joint , note for sor sl.no.: 35: ( 1 ) rate for weld joints of vents & drains shall be paid on actual measurement using the applicable sor. ( 2 ) for radiography of weld joints, rates shall be paid separately as per applicable sor. , stainless steel piping work abovegroundthe job includes transporation of all free issue materials from owners storage point to work site, handling at site, cutting, bevelling, fabrication, laying, welding & erection of stainless steel piping above ground level at all locations, overhead, over sleepers, piperacks, crossovers, pipe sleeves, trenches, stand posts, connecting with equipments & nozzles, providing tappings from the existing pipelines at all grades & elevations including under road culverts.the piping job includes all modification and replacement jobs involving pipes & all types of fittings like elbows / tees / reducers / half coupling / full coupling, etc., all types of flanges like slip on / raised face, etc., all types of inline instruments like rotameter / pressure gauges / thermowells, etc., valves, expansion joints, steam traps, orifice assemblies, strainers, vents, drains, funnels, etc., of different schedules, pressure ratings and for various temperature applications. the piping job includes providing shoe supports, pads at support locations, reinforcement pads, etc., wherever required.the job includes flushing, preparing work area for executing hot work, bending to suit the contours wherever required, socket, fillet, butt welding using tig welding process / manual arc welding process as required with relevant filler wires / electrodes as required, dpt wherever required, hydraulic / pneumatic test as per codes, specification, drawings and draining of water & drying with compressor air after hydrotest.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, returning back the unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions.the rates for the following items shall be exclusive of blinding & deblinding, reinforcement pad welding, radiography, hydrotesting, flushing of old piping, removal of old piping for replacement and erection & removal of scaffolding.the rates for the following items shall be inclusive of cutting, fabrication, laying, erection, welding, providing shoe supports, pads at support locations, flushing of the new piping system, offering stagewise inspection and draining / drying of the piping system after hydrotesting. hydrotesting& old line flushing of pipe line are not included in sor and rate shall be as per applicable sor. , socket welding stainless steel ( all elevations & all thickness ) , stainless steel above ground piping socket / fillet welding joint using filler wires / electrodes of grades er / e 308, 308h, 308l, 347 , stainless steel above ground piping socket / fillet welding joint using filler wires / electrodes of grades er / e 309, 309 mo, 316, 316l , butt welding stainless steel ( all elevations & all thickness ) , stainless steel above ground piping butt welding joint using filler wire / electrodes of grades er / e 308, 308h, 308l, 347 , stainless steel above ground piping butt welding joint using filler wire / electrodes of grades er / e 309, 309 mo, 316, 316l , ss fabrication works , fillet welding stainless steel using electrodes of grades e 308, 308h, 308l, 347the job includes flushing, preparing work area for executing hot work, grinding, fillet welding on plate surfaces using suitable stainless steel electrodes at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , fillet welding stainless steel upto 8 mm thicknessusing electrodes of grades e 308, 308h, 308l, 347 , fillet welding stainless steel using electrodes of grades e 309, 309 mo, 316, 316l the job includes flushing, preparing work area for executing hot work, grinding, fillet welding on plate surfaces using suitable stainless steel electrodes at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , fillet welding stainless steel upto 8 mm thicknessusing electrodes of grades e 309, 309 mo, 316, 316l , butt welding stainless steel using electrodes of grades e 308, 308h, 308l, 347the job includes flushing, preparing work area for executing hot work, grinding, bevelling, bending to suit the contours wherever required, fit ups, butt welding on plate surfaces using suitable stainless steel electrodes at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , butt welding stainless steel upto 8 mm thicknessusing electrodes of grades e 308, 308h, 308l, 347 , butt welding stainless steel using electrodes of grades e 309, 309mo, 316, 316lthe job includes flushing, preparing work area for executing hot work, grinding, bevelling, bending to suit the contours wherever required, fit ups, butt welding on plate surfaces using suitable stainless steel electrodes at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , butt welding stainless steel upto 8 mm thicknessusing electrodes of grades e 309, 309 mo, 316, 316l , note for sor sl.no.: 37: ( 1 ) thickness of piping for measurement shall be based on the relevant ansi or equivalent standards ( 2 ) the finished weld joint elevation at site shall be taken as reference for measurement, wherever applicable. ( 3 ) the rates for socket & fillet welding in piping shall remain same for all thickness and elevations as per sor. ( 4 ) rate for weld joints of vents & drains shall be paid on actual measurement using the applicable sor. ( 5 ) for reinforcement pad welding, therates shall be paid separately as per applicable sor. ( 6 ) fabrication & welding of pipe shoe supports & pad at support locations are included in sor and will not be considered for measurement. ( 7 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. ( 8 ) for blinding & deblinding wherever involved, rates shall be paid separately as per applicable sor. ( 9 ) radiography of weld joints is not included in sor andrates shall be paid separately as per applicable sor. ( 10 ) in case of replacement of existing piping, rates for the removal of old pipelines shall be paid separately as per applicable sor. ( 11 ) for steam tracing piping work, hydraulic testing of piping is not required. for bending tracer pipelines, the rates shall be paid separately as per applicable sor. , cs fabrication works , fillet welding carbon steel ( using e 6013 electrode ) the job includes flushing, preparing work area for executing hot work, grinding, fillet welding on plate surfaces using e 6013 electrodes at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , fillet welding carbon steel upto 8 mm thickness using e 6013 electrodes , butt welding carbon steel ( using e 6013 electrode ) the job includes flushing, preparing work area for executing hot work, cutting, grinding, bevelling, bending to suit the contours wherever required, fit ups, butt welding of plate surfaces using e 6013 electrodes at all grades & elevations.the job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job in all respects as per eic instructions. , butt welding carbon steel upto 8 mm thickness using e 6013 electrodes , patch plate welding carbon steel using e 6013 electrodesthe job includes collection & transportation of required materials from owners storage point, marking to the required size, cutting, bending to the desired curvature wherever required, edge preparation, fit up & fillet welding on all four sides using e 6013electrodes, flushing the finished weld surface by grinding and offering dpt at all grades & elevations.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, transportation of unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , patch plate welding carbon steel upto 10 mm thickness using e 6013 electrodes patch welding includes patch welding in tanks, pipe lines, other static vessels etc., , note for sor sl.no.: 40: ( 1 ) the above rates are applicable for all external welding jobs and internal welding jobs using e 6013 electrodes. , attending steam leaks by hot works , attending steam leaks by hot works as per the enclosed scope of work ( unit of measurement ea = per leak ) . , pipe clamps fabricationthe job also includes supplying of all types of tools & tackles, machineries, all consumables and labour to complete the job ( including the bending the pipe to suitable curvature ) in all respects as per eic instructions.scrap pipes will be issued by cpcl at free of cost , pipe clamps size upto5 inch dia. , pipe clamps size 6 inch dia. to 10 inch dia. , pipe clamps size 12 inch dia. to 16 inch dia. , pipe clamps size 18 inch dia. to 24 inch dia. , pipe clamps size 26 inch dia. to 30 inch dia. , pipe clamps sizeabove 32 inch dia. , fabrication & erection of structurals ( all elevation ) the job includes fabrication and erection of carbon steel structurals in position such as platforms, ladders, stairs, brackets, pipe supports, pipe shoe, using the structural materials like angles, flats, channels, beams, rounds, plates etc. at all grades & elevations.the job also includes transportation of the required structural materials from owners storage point to worksite, cutting to the required size, bolting and / or welding of joints etc. as per drawings, specifications & instructions of eic and preparing the area for hot work.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, returning back the unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions. , fabrication and erection of structurals ( all elevation ) , note for sor sl.no.: 43: ( 1 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. , erection and welding of platform / ladder gratings ( all elevation ) the job includes erection & welding of gratings in position under the support structure in columns, vessels, tanks, staircase, platforms, step ladders, etc., at all grades & elevations with necessary corrections at work site on the supplied grating to fit to the site requirements.the job also includes transportation of the required structural materials from owners storage point to worksite, cutting to the required size, bolting and / or welding of joints etc. as per drawings, specifications & instructions of eic and preparing the area for hot work.the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, returning back the unused materials to owners storage point and dumping the generated scrap material to designated area as per eic instructions , erection and welding of gratings ( all elevation ) , note for sor sl.no.: 44: ( 1 ) for scaffolding work wherever required, rates shall be paid separately as per applicable sor. , general notes: ( 1 ) the contractor shall use his own transport for shifting material from / to ware house & work site and for shifting the scrap to scrap yard or designated place....
36131426 supply of set contains three items. 1. platform trolly. model: 523. size 5ft x 3ft with 12 x 3 solid rubber tyre with bearing capacity withstand 1 ton 01 nos. 2. box type loading wheel barrow. model: 514. capacity 80 litre wheel size 12 x 2 solid rubber tyre with bearing heavy duty 01 nos. 3. self support aluminium ladder. 12 feet both side 65mm wide flat steps, heavy duty 02 nos. => limited...
36110307 bids are invited for trichy airport copper plate , copper strip , copper wire non stranded , copper rod . , insulated copper wire , gi pipe , pvc pipe , heavy duty pvc pipe plastic corrugated hose. , salt , charcoal , cable tray , bamboo disposable ladder , self supporting heavyduty folding aluminium ladder , battery stand procurement of earthing materials and accessories aai total quantity : 7355...
35388352 supply of heavy duty telescopic aluminium ladder load bearing capacity: minimum150 kgs. max working height: minimum 11 mtr with non slip rubber feet and retractable integrated dampers with automatic locking en131 safety certified sturdy and durable light weight and compact size with detachable hook made from sandblasted aerospace grade aluminum minimum one year warranty make bathla or equal make, hsn code: 8607 [ warranty period: 30 months after the date of delivery ] => limited...
34860638 tender for supply of items : plastic chairs ___ cushion chairs ceiling fans a/c (1.5 ton.. split) a/c (1.5 ton.. window) tube light — fitting steel almirah steel rack (open type) file rack (book shelf) aluminium ladder printer (dot matrix) steel table weighing scale key board cpu on1 shell scanner printer laser printer colour (inkjet) sofa 3 seater sofa — singler tvs motor bikes (sports) fridge cpu without hard disk monitor lcd...
34660670 supply of heavy duty telescopic aluminium ladderheavy duty telescopic aluminium ladder, heavy duty telescopic aluminium ladder load bearing capacity: minimum150 kgs. max working height: minimum 11 mtr with non slip rubber feet and retractable integrated dampers with automatic locking en131 safety certified sturdy and durable light weight and compact size with detachable hook made from sandblasted aerospace grade aluminum minimum one year warranty make bathla or equal make, hsn code: 8607 => limited...
34295694 supply of heavy duty telescopic aluminium ladderheavy duty telescopic aluminium ladder, heavy duty telescopic aluminium ladder load bearing capacity: minimum150 kgs. max working height: minimum 11 mtr with non slip rubber feet and retractable integrated dampers with automatic locking en131 safety certified sturdy and durable light weight and compact size with detachable hook made from sandblasted aerospace grade aluminum minimum one year warranty make bathla or equal make, hsn code: 8607 => limited...
34175434 hiring of 1 no of 7mtr height aluminium ladder including driver cleaner fuel oil driver cleaner salaries bata insurance and other charges etc for maintenance of street lights for a period of one year in zone ix non o and m zone ...
34175423 hiring of 4 nos of 7mtr height aluminium ladder including driver cleaner fuel oil driver cleaner salaries bata insurance and other charges etc for maintenance of street lights for a period of one year in zone x non o and m zone ...
34175421 hiring of 4 nos of 7mtr height aluminium ladder including driver cleaner fuel oil driver cleaner salaries bata insurance and other charges etc for maintenance of street lights for a period of one year in zone xiii non o and m zone ...
34153108 tcmc supply of precautionery materials for flood affected area during north east monsoon in zone 2 office supply and deliivery of barrigade tape , supply and deliivery of 3 fire hose ( 30 mt. ) , supply and deliivery of 2.5 fire hose ( 30 mt ) , supply and deliivery of 2.5 green hose ( 30 mt ) , supply and deliivery of 3 green hose ( 30 mt ) , supply and deliivery of spaner set double head ( small ) , supply and deliivery of spanerset single head ( big ) , supply and deliivery of cutting player , supply and deliivery of 11kva e.b gloves , supply and deliivery of normal hand glovees half size , supply and deliivery of normal hand glovees full size , supply and deliivery of foot valve , supply and deliivery of manvetti , supply and deliivery of vettukaththi , supply and deliivery of iron bar5 feet , supply and deliivery of 2 hp desilt motor , supply and deliivery of power saw , supply and deliivery of aluminum ladder , supply and deliivery of torch light...
34109090 supply of aluminium ladderaluminium ladder, aluminium ladder for inter gangway fitment drg no: icf / j& t / misc 2952. alt nil => limited...
33898986 auction for the disposal of one time at ashok leyland ltd, unit 1, hosur item listing 1 asi!137649 lot no : 1 scrap turbo chargers 155 no [per no basis] 2 asi!137650 lot no : 2 scrap crs injectors 27 no [per no basis] 3 asi!137651 lot no : 3 scrap inline/rotary injectors 1360 no [per no basis] 4 asi!137652 lot no : 4 scrap p15 injectors 56 no [per no basis] 5 asi!137653 lot no : 5 scrap common rails (all types) 54 no [per no basis] 6 asi!137654 lot no : 6 scrap starter motor 24v 66 no [per no basis] 7 asi!137655 lot no : 7 scrap starter motor 12v 58 no [per no basis] 8 asi!137656 lot no : 8 scrap p15 starter motor 5 no [per no basis] 9 asi!137657 lot no : 9 scrap air compressor 111 no [per no basis] 10 asi!137658 lot no : 10 scrap alternator 24v & 28v 72 no [per no basis] 11 asi!137659 lot no : 11 scrap alternator 12v 24 no [per no basis] 12 asi!137660 lot no : 12 scrap fip crs cb18 5 no [per no basis] 13 asi!137661 lot no : 13 scrap fip crs cb28 12 no [per no basis] 14 asi!137662 lot no : 14 scrap neptune fip 30 no [per no basis] 15 asi!137663 lot no : 15 scrap zd30 engine fip 9 no [per no basis] 16 asi!137664 lot no : 16 scrap fip inline 6 cylinder 32 no [per no basis] 17 asi!137665 lot no : 17 scrap fip inline 4 cylinder 2 no [per no basis] 18 asi!137666 lot no : 18 scrap fip rotary standadyne/bosch 6 cylinder 9 no [per no basis] 19 asi!137667 lot no : 19 scrap fip rotary standadyne/bosch 4 cylinder 7 no [per no basis] 20 asi!137668 lot no : 20 scrap denso fip 3 no [per no basis] 21 asi!137669 lot no : 21 scrap miscellaneous fip 18 no [per no basis] 22 asi!137670 lot no : 22 scrap fuel injection pump 19 no [per no basis] 23 asi!137671 lot no : 23 scrap ac compressor 6 no [per no basis] 24 asi!137672 lot no : 24 scrap egr sub assembly 12 no [per no basis] 25 asi!137673 lot no : 25 scrap neptune egr sub assembly 8 no [per no basis] 26 asi!137674 lot no : 26 scrap bs6 egr sub assembly 24 no [per no basis] 27 asi!137675 lot no : 27 scrap egr valve 9 no [per no basis] 28 asi!137676 lot no : 28 scrap fip gear housing 10 no [per no basis] 29 asi!137677 lot no : 29 scrap p15 power steering pump 13 no [per no basis] 30 asi!137678 lot no : 30 scrap air intake throttle (big & small) 48 no [per no basis] 31 asi!137679 lot no : 31 scrap p15 water pump 354 no [per no basis] 32 asi!137680 lot no : 32 scrap fuel pressure regulator 29 no [per no basis] 33 asi!137681 lot no : 33 scrap hci dosing unit 6 no [per no basis] 34 asi!137682 lot no : 34 scrap case oil cooler with filter 37 no [per no basis] 35 asi!137683 lot no : 35 scrap power steering pump 24 no [per no basis] 36 asi!137684 lot no : 36 scrap h engine water pump assy 16 no [per no basis] 37 asi!137685 lot no : 37 scrap carbide tip with hole 100 kg [per kg basis] 38 asi!137686 lot no : 38 scrap carbide tip without hole 40 kg [per kg basis] 39 asi!137687 lot no : 39 obsolete carbide tool 70 kg [per kg basis] 40 asi!137688 lot no : 40 scrap broaching tool 50 kg [per kg basis] 41 asi!137689 lot no : 41 scrap grinding wheels (ms) 8 no [per no basis] 42 asi!137690 lot no : 42 scrap copper and brass materials 200 kg [per kg basis] 43 asi!137691 lot no : 43 scrap hss tools (drill bits & reamer) 1200 kg [per kg basis] 44 asi!137692 lot no : 44 scrap various types of gauges 200 kg [per kg basis] 45 asi!137693 lot no : 45 scrap bearings 300 kg [per kg basis] 46 asi!137694 lot no : 46 scrap milling cutters 2000 kg [per kg basis] 47 asi!137695 lot no : 47 scrap hobbing cutters 75 no [per no basis] 48 asi!137696 lot no : 48 unused steel shots 500 kg [per kg basis] 49 asi!137697 lot no : 49 scrap tyres 2000 kg [per kg basis] 50 asi!137698 lot no : 50 scrap hrs materials 3000 kg [per kg basis] 51 asi!137699 lot no : 51 scrap radiator 5 no [per no basis] 52 asi!137700 lot no : 52 scrap radiator fan with clutch 13 no [per no basis] 53 asi!137701 lot no : 53 scrap vehicle gear box 1 no [per no basis] 54 asi!137702 lot no : 54 scrap differential gear box 3 no [per no basis] 55 asi!137703 lot no : 55 scrap marine gear box 1 no [per no basis] 56 asi!137704 lot no : 56 scrap power steering gearbox 2 no [per no basis] 57 asi!137705 lot no : 57 scrap rear axle 2 no [per no basis] 58 asi!137706 lot no : 58 scrap front axle 1 no [per no basis] 59 asi!137707 lot no : 59 scrap dummy rear axle 1 no [per no basis] 60 asi!137708 lot no : 60 scrap rear axle casing 2 no [per no basis] 61 asi!137709 lot no : 61 scrap damaged engine parts 1 lot [per lot basis] 62 asi!137710 lot no : 62 obsolete tool accessories items 1 lot [per lot basis] 63 asi!137711 lot no : 63 obsolete machine maintenace items 1 lot [per lot basis] 64 asi!137712 lot no : 64 obsolete exhaust after treatment system (eats) & air intake system 1 lot [per lot basis] 65 asi!137713 lot no : 65 miscellaneous ms & other scrap with scope of cutting/ loading crane arrangement by buyer in sales yard, shop 4 yard & p15 area 20000 kg [per kg basis] 66 asi!137714 lot no : 66 scrap j series 6 cylinder engine 1 1 no [per no basis] 67 asi!137715 lot no : 67 scrap j series 6 cylinder engine 2 1 no [per no basis] 68 asi!137716 lot no : 68 scrap j series 6 cylinder engine 3 1 no [per no basis] 69 asi!137717 lot no : 69 scrap aluminium ladder 2 nos 1 set [per set basis] 70 asi!137718 lot no : 70 scrap electrical bus bar 3000 kg [per kg basis] ...
33838977 maintenance of electronic installation fans repair maintenance of pumpset dgset stlight and lifts at holiday home, rameswaram.sh providing split ac and aluminium ladder laying cable...
33610857 supply of aluminium ladderaluminium ladder, aluminium ladder for inter gangway fitment drg no: icf / j& t / misc 2952. alt nil => limited...
33158782 supply of aluminium ladderaluminium ladder,aluminium ladder for fixing destination board drg no: icf/j&t/misc 2751 alt nil => limited...
32943197 supply of aluminium ladderaluminium ladder,aluminium ladder for inter gangway fitment drg no: icf/j& t/ misc 2952. alt nil => limited...
32871944 purchase of aluminium lader and insulation rubber mat / 552 / p2 purchase of aluminium lader and insulation rubber mat reg , aluminium ladder , folding type heavy duty 10 feet height aluminium ladder load capacity : 200 kg. , insulation rubber mat , anti skid electrical insulation rubber mat as per is 15652 2006, size:length : 2 mtr. width : 1 mtr.thickness : 2.5mmvoltage : 11 kv....
32723014 supply of aluminium ladderaluminium ladder,aluminium ladder for fixing destination board drg no: icf/j&t/misc 2751 alt nil...