39878283 preparation of drawings, supply of cs structural materials, zinc aluminium alloy coated profile sheet, fabrication, painting, construction of semi covered protective sheds and miscellaneous safety and security related structure, dismantling, modification and erection of shed with dismantled material, excavation of earth, supply and fixing of hilti anchor fastener...
39622565 supply of cordless impact wrench with complete set mode: single mode drive: 1 / 2 inch torque output: 1000 ft lb or more free speed: 1900 rpm or more battery voltage: 18 v warranty: one year it should able to rotate in both clock wise and anti clockwise, it should have voltage protection, dual bay battery charger, led light to illuminate work area. make: makita / bosch / stanley / ingersoll rand / fein [ warranty period: 12 months after the date of delivery ] , pneumatic impact wrench housing material: aluminium alloy size: 1 / 2 inch torque: 1085 nm operating pressure: 6.2 bar or less feature: handle exhaust warranty: one year weight: 2.5 kg or less make: chicago pneumatic / bosch / ingersoll rand / metabo / hazet [ warranty period: 12 months after the date of delivery ] , digital outside micrometer measurement range: 125 150 mm. leastcount: 0.001 mm. anvil: non removable with flat measuring face spindle end tipped with tungsten carbide display type: lcd material of the frame: stainless steel material of the spindle: hardned stainless steel. warranty: one year condition: 1. shape of frame of micrometer must be in semi circle ( c type ) 2. tenderer must attach photocopy of micrometer in bidding calibration certificate is required from nabl / ilac accredited agency. make: insize / mitutoyo / baker / tesa / microgerman / brown and sharpe [ warranty period: 12 months after the date of delivery ] , digital outside micrometer measurement range: 150 175 mm. leastcount: 0.001 mm. anvil: non removable with flat measuring face spindle end tipped with tungsten carbide display type: lcd material of the frame: stainless steel material of the spindle: hardned stainless steel. warranty: one year condition: 1. shape of frame of micrometer must be in semi circle ( c type ) 2. tenderer must attach photocopy of micrometer in bidding calibration certificate is required from nabl / ilac accredited agency. make: insize / mitutoyo / baker / tesa / microgerman / brown and sharpe [ warranty period: 12 months after the date of delivery ] , digital outside micrometer measurement range: 200 225 mm. leastcount: 0.001 mm. anvil: non removable with flat measuring face spindle end tipped with tungsten carbide display type: lcd material of the frame: stainless steel material of the spindle: hardned stainless steel. warranty: one year condition: 1. shape of frame of micrometer must be in semi circle ( c type ) 2. tenderer must attach photocopy of micrometer in bidding calibration certificate is required from nabl / ilac accredited agency make: insize / mitutoyo / baker / tesa / microgerman / brown and sharpe [ warranty period: 12 months after the date of delivery ] , cordless small angle grinder. tool type: cordless disc diameter: 125 mm. grinding spindle thread: m14 no load speed: 10000 rpm battery voltage: 18 v battery included: yes warranty: one year make: bosch / makita / dewalt / stanley [ warranty period: 12 months after the date of delivery ] , analog outside micrometer measurement range: 175 200 mm. leastcount: 0.01 mm. anvil: non removable with flat measuring face spindle end tipped with tungsten carbide material of the frame: stainless steel material of the spindle: hardned stainless steel. warranty: one year condition: 1. shape of frame of micrometer must be in semi circle ( c type ) 2. tenderer must attach photocopy of micrometer in bidding calibration certificate is required from nabl / ilac accredited agency make: insize / mitutoyo / baker / tesa / microgerman / brown and sharpe [ warranty period: 12 months after the date of delivery ] , digital outside micrometer measurement range: 175 200 mm. leastcount: 0.001 mm. anvil: non removable with flat measuring face spindle end tipped with tungsten carbide display type: lcd material of the frame: stainless steel material of the spindle: hardned stainless steel. warranty: one year condition: 1. shape of frame of micrometer must be in semi circle ( c type ) 2. tenderer must attach photocopy of micrometer in bidding calibration certificate is required from nabl / ilac accredited agency make: insize / mitutoyo / baker / tesa / microgerman / brown and sharpe [ warranty period: 12 months after the date of delivery ] , analog outside micrometer measurement range: 200 225 mm. leastcount: 0.01 mm. anvil: non removable with flat measuring face spindle end tipped with tungsten carbide material of the frame: stainless steel material of the spindle: hardned stainless steel. warranty: one year condition: 1. shape of frame of micrometer must be in semi circle ( c type ) 2. tenderer must attach photocopy of micrometer in bidding calibration certificate is required from nabl / ilac accredited agency make: insize / mitutoyo / baker / tesa / microgerman / brown and sharpe [ warranty period: 12 months after the date of delivery ] , ratchet type torque wrench square drive size: 1 / 2 inch torque range: 70 340 nm swing arc: 10 degree over all length: 780mm torque limiting direction: clock wise materail: steel; finish: chrome plated make:stanley bri tool or taparia or gedore or snap on or tristar [ warranty period: 12 months after the date of delivery ] , ratchet type torque wrench square drive size: 1 / 2 inch torque range: 10 70 nm swing arc: 10 degree over all length: 780mm torque limiting direction: clock wise materail: steel; finish: chrome plated make: stanley bri tool / taparia / snap on / tristar / gedore [ warranty period: 12 months after the date of delivery ] => limited...
39596421 bids are invited for 5 types of round steel round gr 20x2h4a 40mm dia steel , round gr st 20 12mm dia steel , round gr 30xgca steel 110 mm dia , round alluminium alloy 48mm dia , round hot rolled and annealed condition dia 32 total quantity : 10026...
39583520 disposal of scrap available at central stores / sub stores , lot 1 material available at central stores / gcc / trichy 1 empty cylinder for gas of sizes 9 nos., 2 empty cylinder for gas of sizes 2nos., 3 scrap miscellaneous iron 8887 kgs., 4 scrap meters / meter parts 212 kgs., 5 scrap g.i. 2344 kgs., 6 scrap t & p 1607 kgs., 7 scrap teakwood 39 kgs., 8 scrap tube light fittings49 kgs., 9 condd. type writer 1 no., 10 condd. fan w / o regulator 4 nos., 11 condd. table fan 1 no., 12 condd. fire extinguisher 30 nos., 13 scrap alu. incl. aac cut bits3219 kgs., 14 scrap acsr1829 kgs., 15 condd. chain pulley block of sizes2 nos., 16 condd. chair 1 no., 17 scrap machinary part 538 kgs., 18 scrap copper cable2740 kgs., 19 scrap all alluminium alloy 150kgs., 20 condd. pt 11 kv w / o oil 2 nos. 21 condd.22 kv pts w / o oil 7 nos., 22 condd. cooling fan for auto transformer2 nos., 23 condd.computer monitor with cpu 1no., 24 condd. mv / sv / lamp 33nos., 25 condd. portable oil testing kit 2 nos., 26 scrap gi with porcelin 293 kgs., 27 scrap gi / ms tower angel 72 kgs., 28 scrap radiator 9 nos., 29 scrap alluminium with insulation190 kgs., 30 condd. window type a / c 1.5 tone7 nos., 31 scrap auto parts 28 kgs., 32 condd hydralic jack 50 ton 5 nos., 33 empty steel drum above 6 dia1no., 34 empty steel drum 3 to 6 dia1 no. , lot 21empty oil barrel 40 / 45gl.cap ( sh ) 228 nos. 2 empty oil barrel 40 / 45gl.cap ( leaky ) 480nos. , lot 3. 1 scrap gi wire42592 kgs. , lot 4. 1 scrap gi wire 42592 kgs. , lot 5. 1 empty steel drum 3 to 6 dia 38nos., 2 scrap miscellaneous iron 15121 kgs., 3 scrap g.i. 3611 kgs., 4 scrap gi pipe & fitting 360 kgs., 5 connd. gas cylinder 6 nos., 6 condd. dc panel 5 nos., 7 condd. transformer oil filter machine ( with out oil ) 1 no., 8 scrap reel wood 2410 kgs., 9 steel structure for 110 kv coupling cap.9nos., 10 mounting & elevating structure for 110 kv capacitor bank 1 nos., 11 clamp free end for 3 bus. 100 nos., 12 clamp alu. l clamp for panther 45 nos., 13 clamp t alu. for 75 mm bus to dbl zebra11 nos., 14 cable 4x25sqmm lt ug arm alu 64 m, 15 copper cable useful cut bits of various 97 m, 16 repair sleeves for panther conductors50 nos., 17 fitting ss for zebra with armar rod 22 nos., 18 repair sleeve for e / wire 7 / 9 20 nos., 19 clamp spacer for twin zebra 195 nos., 20 dt fittings for panther conductors 22 nos., 21 midspan compression joint ew 7 / 3.15mm 145 nos., 22 midspan compression joint ew 7 / 3.55mm 1355 nos., 23 midspan compression joint for zebra 50 nos., 24 pa rods for panther conductors 26 nos., 25. suspension fittings for ew 7 / 3.15mm 60 nos., 26 vibration damper with protectionrod 8 nos., 27 vibration dampers for zebra 50 nos., 28 washer spring gi18 mm 50kgs., 29 washer spring gi 20 mm640 kgs., 30 pb stub and cleats2set., 31 various template loose parts ( 14 items ) 1 set., 32 pc tower loose parts ( 4 items ) 1 set, 33 ls tower loose parts ( 23 items ) set 1, 34 ks tower loose parts ( 10 items ) 1 set, 35 g tower loose parts ( 3 items ) 1 set, 36 earth pipe gi 1 25mm32 nos. , lot 6. material available at sub stores / gcc / virudhachalam1 scrap miscellananeous iron78 kgs., 2 scrap acsr 812 kgs., 3 scrap gi wire 753 kgs., 4 scrap gi fitting 58 kgs., 5 scrap gi / ms tower angle 13922 kgs., 6 washer packing type gi 25mm 1955 kg., 7 gr tower template 5 set, 8 ksr tower template5 set, 9 lsr tower template 5 set, 10 pa template loose parts ( 10 items ) 1 set, 11 pc template loose parts ( 11 items ) 1 set, 12 gc template loose parts ( 7 items ) 1 set, 13 hc template loose parts ( 8 items ) 1 set. , lot 7.1. clamp dead end w / a type bolts 8 nos, 2. vibration damper for opgw 110 nos, 3. suspension assembly for opgw 1set, 4. bolt & nut gi 16x70 662 kgs, 5. levelling instrument with stand 3 nos, 6. bolt & nut gi 45x25mm 879 kgs, 7. bolt & nut gi 40x18mm 1000 kgs, 8. washer flat gi 20mm 854 kgs, 9. washer flat gi 18mm 1050 kgs, 10. bolt & nut gi 40x20mm 550 kgs, 11. bolt & nut gi 20x70mm 100 kgs, 12. kc template loose parts ( 4 items ) 1 set, 13. a template loose parts ( 10 items ) 1 set, 14. g template loose parts ( 18 items ) 1 set, 15. gcr, hcr, kcr template loose parts ( 16 items ) 1 set, 16. lsr black tower +6 mtr. exten. loose ( 58 items ) 1 set, 17. clamp dead end for kundha tensionfitting 3 nos, 18. gi spring washer 25mm 1205 kgs, 19. double tension without pass through jb 3 set, 20. plate washer 16x3 mm 315 kgs, 21.bolt & nut gi 24x70 582 kgs, 22. hand winch 1 no, 23. pa rod for leopard 10 set, 24. pa rod for zebra 123 nos, 25. pa rods for kundah conductors 34 nos, 26. vibration damper for kundah 26 nos, 27. fan pedestal 16 1 no, 28. chair twmp 3no, 29. table jc 42x24x30 3 nos, 30. drum stand ordinary 2 nos, 31. chest of drawer ( tw ) 1 no, 32. theodalite with stand 3 nos, 33. levelling staff 4 meters 1 no, 34. derrick ( tripoid ) 1 no, 35. four sleeve pulley 1 no and 36.triple sleeve pulley 1 no , lot 8.1 condemned power transformer 10 mva110 / 22 kvmaek:apex., sl.no: t 992 / 10.with out oil available at peraliss / perambalur edc 1 no. , lot 9. material available at sub stores / gcc / thanjavur1 scrap miscellanious iron 131 kgs ., 2 scrap gi42 kgs., 3 scrap teakwood 6 kgs., 4 scrap alu. incl.aac cut bits 8kgs., 5 scrap acsr 3746 kgs., 6 cond. chair1 no., 7 scrap gi wire13949 kgs., 8 scrap gi with porcelin 25 kgs., 9 scrap gi / ms tower angle48kgs., 10 cond. postal weighing balance1 set, 11 empty steel drum 3 to 6 dianos 63 , lot 10. 1 clamp bm switch end for panther acsr 12 nos., 2 steel structure for 110kv cc11 set, 3 230kv switch support str1 set, 4 washer flat gi 18mm 140 kgs., 5 washer packing type gi 25mm280 kgs., 6 bolt u type 16mm 1no., 7 various tower loose parts ( 16 items ) 1 set, 8 kcr 2 cleat 204 nos., 9 pa stub128 nos., 10 pa cleat56 nos., 11 pb 1 s stub 14 nos., 12 pb 2 s cleat 112nos., 13 hcr 2 cleat 61 nos., 14 ct marshalling box 1 no., 15 110kv ab switch support w / o 1 sw5l 7 set., 6 pa stub and cleat5 set, 17 gi spring washer 25mm 316 kgs., 18 p.a.+3 mtr extension 1 set, 19 tower parts for g 51 items 1set, 20 230kv bh fabrication structure 3 set, 21 230kv vc fabrication structure6 set, 22 aluminium earth bond with gi bolt & nut 100 nos., 23 bolt & nut gi 24x45mm1090 kgs., 24 bolt & nut gi 24x50mm 450 kgs., 25 bolt & nut gi 24x60mm 325 kgs., 26 bolt & nut gi 24x7065 kgs., 27 dt fittings for panther conductors 10nos., 28 fitting ss for zebra 26nos., 29 midspan compression joint ew 7 / 3.15mm 26nos., 30 midspan compression joint ew 7 / 3.55mm61 nos., 31 pa rod for leopard 26 nos., 32 pa rod for zebra200 nos., 33 pa rods for kundah conductors85 nos., 34 vibration dampers for zebra 5 nos., 35 washer packing gi 24mm40 kgs., 36 table teakwood sc 1 no. , lot 11. 1 various tower loose parts ( 28 items ) set 1 2 tower parts for g +6 extn. 25 items set 1...
39556098 tender for welcome maintenance and certain misc b / r repair worksto md offrs accn bldgs & periodical servicesto single officers accnatafac under age ( i ) ( af ) coimbatore. ; demolition of stone slabs and tiles of any description or thickness in floors, aprons, wall, etc, including cement mortar bedding ( but not backing ) and removing rubbish off the premises all as specified and as directed. 2 taking down shutters of any description n exc 1 sq.m each each andstacking for issuing under creditall as specified and as directed. 3 taking downshutters exc1 sq. m and n exc 2 sq. m eachandstacking for issuing under credit all as specified and as directed. 4 taking down shutters of any description exc 1.00 sqm and n exc 2 sqm each and stacking for issuing under credit all as specified and directed 5 taking up or down steel tubing of size 15mm dia including connections, valves, taps etcandstacking for issuing under credit., all as specified and as directed. 6 supply and fixsolid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with 19mm x 19mm ms square tube epdm rubber gasket weather seal to be provided throught the frame. the profile shall be mitre cut at two corners and jointed by inserting 02 nos of 150mm long bracket of 15mm x 15mm ms square tube inside the 19mm x 19mm ms square tube and suitable screwed the door frame shall be fixed to the wall using pvc fastners. a minimum of 6 nos screws to be provided for each frame all as specified and as directed.note: the quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces. 7 supply and fixing upvc window / ventlators25 mm thick factory made white colour partly glazed and partly stainless steelwiremesh window shutter consisting of frame made out of ms tube of19 gauge of size 15 mmx15 mm for style top &bottom rail .upvc channel of size 62 mmx25x50 mm forthe window shutter forming styles &rails glass panel and wire meshwill be externely in the clear space avilable between stiles and rails and fixedshutter upvc beading of size 12mmx8mm complete incluing solid upvc window frame of size 50mmx42 mm and 2 no alminum handle100 mm size, 2 no stainless steel hinges 75 mm size, 2 no alminum tower bolt 100 mm sizepowder coated ms sq bar 12 mm @100mm centre to centre should be fixed in upvc frame .sample as approved by age ( i ) / engr in charge . 8 s & f in repairs floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. 9 s & f in repiars 150mm ms ordinary helical springs ofordinary rat tail rod pattern springs including roller and roller plate complete in repairs. 10 supply and fix 35mm thick second class hard glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. ( without sash bars ) , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 ( a ) for door all as specified and as directed. 11 supply and fix in repairsfactory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of ms tubes for top & bottom rails. ms frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement all as specified and as directed. 12 m&l for 15mm thick screed bedin cement mortar 1:6 all as specified and as directed. 13 material and labour for non skid ceramic colouredtiles 7 to 8mm thick square / rectangular ) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified. 14 material and labour for non skidcoloured ceramic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. 15 material and labour for non skidcoloured ceramic vitrified 8 to 10mm thick tiles ( square / rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchall as specified and as directed. 16 m&l for 10mm thick backing coat as in skirtingin cement mortar 1:6 all as specified and as directed 17 all as per item no. 13 above but as in skirting 18 all as per item no. 14 above but as in skirting 19 all as per item no. 15 above but as in skirting 20 material and labour for 300mm x 200mm x 7mm thick coloured glazed ceramic tiles onvertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith tile including 10mm thick backing coat in cement mortar 1:6 all as specified and as directed. 21 supply and fix grating doom 125mm dia with waste hole of ptmt ( minimum weight 40 gms ) all as specified and as directed. 22 s&f20 mm dia 3 layer pp r polyproperlene random copolymer ) concealed pipes sdr 7.4 ( pn 16 ) uv stablized andantimicobial fusion welded having thermal stability for hot & cold water supply including all pp r plain & brass threaded polyproplene random fittings fixed to walls, ceiling or in floors etccomplete all as specified and directed. 23 supply and fix in repairs 15mm dia bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and as directed.make: soma / leader / zolotto / sieko 24 supply and fix in repairs15mm dia stop valves, cast copper alloy, fancy type chromium plated with long shank and cub ( concealed type ) high pressure with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and as directed.make: soma / leader / zolotto / sieko 25 supply and fix in repairs brass chromium platedshower rose with or without swivel joints, 125mm size including fixing to 15mm dia steel pipe, all as specified and as directed.make: soma / leader / zolotto / sieko 26 supply and fix pvc cabinetof size 600 x 450mm with shelves and hinged cover all as specified and as directed.make : parryware / kohinoor / sintex 27 s&f of plastic water closet seat cover white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges device fixed in repairs 28 supply and fix 100mm size msbutt hinges medium weight all as specified and as directed. 29 supply and fix aluminium anodised barrel tower bolt of extruded section of size 150mm all as specified and as directed. 30 supply and fix extruded aluminium alloy handles, fabricated type, anodisedof size 125mm all as specified and as directed.make: classic / jyoti / shalimar / asoka 31 supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed. 32 material and labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper all as specified and as directed. 33 material and labour for preparation of old decorated ceiling surfaces and applying one coat of white wash all as specified and as directed. 34 m&l for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying onecoat of synthetic enamel paint all as specified and as directed. 35 all as per item no. 30but for old steel surfaces 36 m&l for preparation of old wall surfaces and applying one coat of white wash complete all as specified and directed. 37 material and labour for preparation of old decorated external wall surfaces and applying one coat of cement based paint all as specified and as directed. 38 supply and fixstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. 39 supply and fixstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs all as specified and as directed. 40 supply and fix figured glass, pin head type, 4mm thick, and glazing with oil putty in squares not exceeding 0.50 sqm in each pane including hacking out old glass all as specified and as directed. 41 hacking out old broken glass from metal frame including punching or drilling out oldgalzing pins / spring clips and s / f sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 sqm in each pane including. necessary new oil putty or with existing metal beadings complete. 42 supply and fix in repairs low level pvcflushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, pvc flush down pipe 32mm dia as required with bend, etc complete all as specified and as directed. 43 s& f in repairs pvc waste pipe 32mm bore for , whb, and sink 44 supply and fix in repairsvitreous china wash down water closet pan ( pedestal pattern ) , white ( excluding flushing cistern and flush pipe ) , including fixing to existing 125 / 110mm size pvc ( swr ) p trap etc complete all as specified and as directed. 45 s& f in repairs viterous china wash hand basin white flat back size 450 x 300 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste fittings of 32 mm waste pipeetc all as specified 46 supply and fix in repairs health faucet ( abs body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and abs wall hook including making connections and fixed in position complete in all respect as specified and as directed. 47 supply and fix in repairs brass chromium plated health faucet with hand held and spring operated control valve with pvc flexible pipe connection of suitable length as directed fixed to 15mm bore pipe all as specified and as directed. 48 material and labour for complete removal of existing treatementincluding washing, rubbing down and stopping of distempered and painted surfaces, applying 2 mm thick wall care puttyover a coat of chalk whitingprimer and applying two coats of acrylic emulsion distemper all as specified and directed. 49 m&l for chalk whitining on plastered wall surfaces preparatory to distemberingon wall wall surfaces in patches. 50 taking down cement plaster on brick or stone walls etc., including ceilingsincluding racking out joints, hacking for key, scrubbing down with wateretc., all as directed. 51 material and labour for rendering5mm thick in cement mortar1:3 on fair surfaces of brick work or concrete surfacesof ceiling in repair all as specified and directed 52 material and labour for preparation of theplastered surfaces of ceiling and applying three coats of white wash all as specified and directed. 53 material and labour for rendering 15mm thick in cement mortar1:6 on fair surfaces of brick work or concrete surfaces of wall , finishedeven and smooth without using extra cement all as specified and as directedwork in patches. 54 material and labour for preparation of newly plasteredwall surfaces, applying 3 mm thick wall care putty andapplyingtwo coats of acrylic emulsion distemper over acoat of chalk whiting primer completeall as specified and as directed. 55 material and labour for preparation of newly plasteredwall surfaces and applying two coats of white washcompleteall as specified and as directed. 56 material and labour for preparation of old treated surfaces of wall by cleaning with brush, filling the cracks / holes with approvedcrack filler and applying one coat of premium exterioracrylic emulsion paint ( matt ) completeall as specified and as directed....
39399172 supply of led flame proof light fitting 20 w generally conforming to iec 60079 1:2007 and shall also meet the following technical requirements: 1.material : cast aluminium alloy lm6 2.flame proof:ex d zone 1 &2 , gas group iia & ii b as per is / iec 60079 1:2007 . 3.weather proof : ip / 65 as per is / iec 60529:2001. 4.operating voltage : 110 v dc 5.finish : light grey shade 631 / is 5 ( epoxy powder coated ) 6.mounting gasket : neoprene 7.earthing : 1 no. internal & 2 nos external with m6 tapped screws. 8.glass : heat resistant toughned type a flat glass. 9.the fitting shall be supplied along with suitable brass cable entry gland and dummy plug with strap suspension 10.the light fitting shall be supplied along with adaptor bracket ( mild steel powder coated matching to the light fitting finish ) suitable for wall mounting type. 11.the overall dimensions of the fitting ( including adaptor bracket ) shall not exceed 330 mm ( h ) x 205 mm ( d ) . note : 1. acceptable makes : m / s voltech manufacturing company ltd., m / s baliga lighting equipments ltd., & m / s scg exd tech pvt.ltd., 2. oems or their authourised dealers shall only be considered. 3. necessary test reports and test certificates from cmri shall be submitted for validation if required. 4. oga drawings with bom & technical details shall be got approved from icf before effecting bulk supply. [ warranty period: 30 months after the date of delivery ] => limited...
39322760 supply and installation of smart door lock for executive chamber having following specifications: 5 way unlocking using finger print, passcode, bluetooth mobile app, rfid access card and emergency key, upto 50 finger print, access sharing features two layer authentication, stainless steel ( 5 ) with wrong password alert. low battery alert via mobile app, material: aluminium, alloy steel, control method: voice, style: black; dimension: 34.l x 19. l x 12.2 cm approx. installation with standard accessories. make: schlage or qubo essential or wyze or kwikset or ultraloq. [ warranty period: 30 months after the date of delivery ] => limited...
39244010 supply of unf alu alloy conduit size 25mm dia, aluminium alloy conduit ( 25mm dia, wall thickness 2.0mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( ol d ) of table 2 of is:1285 ( latest ) suitable for electrical wiring, marking and dimensions shall confirm to clause 6 & 7 of is 9537 latest part ii . the supply of conduit shall be in standard length of 4 meters. note icf approved sources shall only be considered. [ warranty period: 30 months after the date of delivery ] furnishing depot / icf, chennai tamil nadu 15075.00 metre => limited...
39177645 supply of spare cast alluminium alloy aerofoil impeller duly balance suitable for mvsl blower to clw specification no. clw / es / b 14 alt. c [ warranty period: 30 months after the date of delivery ] => limited...
39166405 tender for supply and errection of solar minimast led light ( 60w x 6nos ) in ward no.98 ; solar minimast led light ( 60w x 6nos ) supply, delivery and fixing of make : melon1. 60watts led fittings x 6nos2. aluminium alloy body3. triple water proof4. remote control operation5. ip 65 rating6. 10 meter height post with top circular ring7. with base plate, foundation bolt8. inclusive of installation ........ 1no costincluding gst 18% , installation and transportation...
39141520 supply of unf conduit alu alloy 40mm dia to is, aluminium alloy conduit ( 40mm dia, wall thickness 2.0mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest ) suitable for electrical wiring, marking and dimensions shall confirm to clause 6 & 7 of is 9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. note as per dy.cmm / g letter no.04 / rb 120 / icf 206 / 707 dt.03.02.2023, eligibility criteria shall be : sl.no. c for items not listed in vendor directory of icf / rcf / mcf / rdso please find tender drawing key created for demand : 05231344 , this can be viewed in ireps vendor portal with key : 0523qakiv0r1344 [ warranty period: 30 months after the date of delivery ] furnishing tamil nadu 2209.00 metre => limited...
38865579 supply of mingle modular plt ( 41 seater ) work surface, mingle modular plt ( 41 seater ) work surface with mingle modular plt_2 str main st mingle modular plt_2 str, shared st 1350 x 600 x 740mingle modular plt 1800w st 1800 x 850 x 740, with accessories dsk 2 way name plate , dsk mod doc shelf, dsk hdmi wire man ( one packet contain 8 qty ) made of 25mm thick pre laminated twin board of e1 p2 grade and approved shade conforming to is 12823:1990, edge banded with matching 2 mm thick pvc lipping.plastic abs access flap is provided for easy access to wires and cables. work top is available in various shapes as shown above. understructure it consist of 18mm thick pre laminated twin board of e1 p2 grade and approved shade conforming to is 12823:1990, edge banded with matching 2 mm thick pvc lipping. aluminium alloy 63400 wp profile is used for connecting panels together. the product has a knock down construction. modesty panel made of 18mm thick pre laminated twin board of e1 p2 grade and approved shade conforming to is 12823:1990, edge banded with matching 2 mm thick pvc lipping. powder coated accent metal strip provided below work surface to enhance aesthetics. it is made of 0.8mm crca as per is 513, epoxy polyester powder coated ( dft 40 60 microns. wire management an array of panels made of 0.8mm crca ms is:513, epoxy polyester powder coated ( dft 40 60 microns ) is used for flow of wires and cables. provision to mount anchor roma 6 module plate is provided below worktop. cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio , video cables onto worktop and connect devices charger to power socket below worktop. [ warranty period: 12 months after the date of delivery ] => limited...
38740836 sale of non moving and obsolete items ferrous and non ferrous scraps etc sale of non moving and obsolete items ferrous and non ferrous scraps etc in central store thanjavur , lot 1 condemned distribution transformars without oil ( aluminium ) = 28 nos. 1.63 kva / 11 kv 12 nos. 2.100 kva / 11kv 10 nos. , 3. 150 kva / 11 kv 5 nos.4.250 kva / 11 kv 1 no the details of sl.nos.are given of specifications. , lot 2condemned distribution transformars without oil ( aluminium ) = 31 nos. 1.63 kva / 11 kv 8 nos. 2.100 kva / 11 kv 21 nos.3.150 kva / 11 kv 1 no. 4. 250 kva / 11 kv 1 no. the details of sl.nos.are given of specifications. , lot 3. condemned distribution transformars without oil ( copper ) = 27 nos.1. 50 kva / 11 kv 3 nos., 2. 50 kva / 22kv 1 no 3. 63 kva / 22 kv 1 no. 4.100 kva / 11 kv 9 nos.5. 150 kva / 11 kv 2 nos. 6. 200 kva / 11 kv 2 nos. 7.250 kva / 11 kv 7 nos. 8.100 kva / 22 kv 1 no 9. 200 kva / 22 kv 1 no10.condemned 11 kv metering set without oil 2 nos.9.condemned 11 kv ct without oil 28 nos. 10.condemned 33 / 11 kv ct polycrate 3 nos. 11. condemned vacuum interrupter 42 nos. , 12. condemned 11 kv pt 4nos., 13. condemned 33 kv pt 1no .14. condemned oil temprature indicator 1 no.15.condemned 110 kv pt 1no.16. condemned battery charger 5 nos.17. condemned 11 kv vcb 8nos the details of sl.nos.are given of specifications. , lot 4condemned distribution transformars without oil ( aluminium ) = 25 nos. 1.63 kva / 11 kv 14 nos. 2.100 kva / 11 kv 11 nos. the details of sl.nos.are given of specifications. , lot 5condemned distribution transformars without oil ( aluminium ) = 24 nos. 1.100 kva / 11 kv 21 nos. 2.150 kva / 11 kv 1 no. 3. 250 kva / 11 kv 2 nos. the details of sl.nos.are given of specifications. , lot 6.1.aluminium scrap ( aac ) 815 kgs., 2.acsr scrap 30063 kgs., 3. aluminium pvc cable scrap 110 kgs., 4. aaac scrap 7830 kgs., 5.brass scrap misc 1633 kgs., 6.scrap copper cable 4066 kgs.7. scrap aluminium ingot 181 kgs., 8.scrap tube light fitting 92 kgs., 9.condemned window type a / c 1.5 ton 12 nos.., 10.copper brass mixed scrap 21 kgs., 11.all aluminium alloy scrap 224 kgs. , lot 7.1. scrap miscellaneous iron 62000 kgs.2. scrap m.s / r.t.s grill 24881 kgs. 3. scrap auto parts 105 kgs.4. scrap r.s.joists cut bits 14819 kgs.5. scrap g.i 1602 kgs.6.scraptransformer lamination sheet 3141 kgs., 7. scrap rail cut bits 4330 kgs, 8.empty barrel 40 / 45 gal.cap.leaky 110 nos. 9. empty wooden drum 258 nos.10. scrap gi / ms tower angle 4122 kgs. 11.breather scrap 131 kgs. 12. condemned steel drum 3 ft. upto 6 ft.dia 4nos , lot 8.1.transformers aluminium wingding wire scraps with oil paperinsulation 29541 kgs.2. condemned tong tester 2 nos., 3.condemned relay of sizes 19 nos.4. condemned megger of sizes 2 nos., 5. condemned printer 47 nos., 6.condemned motor 0.25 hp 1 no., 7.condemned type writer 2 nos., 8.scrap teak wood 86 kgs., 9.condemned chain pulley block sizes 1no., 10. condemned transformer oil filter machine 1 no., 11. scrap deal wood 68 kgs 12. condemned radiator 1 no. 13.waste paper scrap 8975 kgs., 14. condemned ltct coil 98 nos. , lot 9. 1. condemned energy meter scrap 7690 kgs. 2. condemned high quality meter scrap 7861 kgs. 3.condemned static meter scrap 8510 kgs. 4. condemned cpu 54 nos.5. condemned 2 kva ups 17 nos. 6. condemned monitor 32 nos. 7.condemned 136 dot matrix printer 6 nos , lot 10 scrap m.s. form boxavailable at psc yard ayyampettai 83502 kgs...
38698422 supply of led flame proof light fitting 20 w generally conforming to iec 60079 1:2007 and shall also meet the following technical requirements: 1.material : cast aluminium alloy lm6 2.flame proof:ex d zone 1 &2 , gas group iia & ii b as per is / iec 60079 1:2007 . 3.weather proof : ip / 65 as per is / iec 60529:2001. 4.operating voltage : 110 v dc 5.finish : light grey shade 631 / is 5 ( epoxy powder coated ) 6.mounting gasket : neoprene 7.earthing : 1 no. internal & 2 nos external with m6 tapped screws. 8.glass : heat resistant toughned type a flat glass. 9.the fitting shall be supplied along with suitable brass cable entry gland and dummy plug with strap suspension 10.the light fitting shall be supplied along with adaptor bracket ( mild steel powder coated matching to the light fitting finish ) suitable for wall mounting type. 11.the overall dimensions of the fitting ( including adaptor bracket ) shall not exceed 330 mm ( h ) x 205 mm ( d ) . note : 1. acceptable makes : m / s voltech manufacturing company ltd., m / s baliga lighting equipments ltd., & m / s scg exd tech pvt.ltd., 2. oems or their authourised dealers shall only be considered. 3. necessary test reports and test certificates from cmri shall be submitted for validation if required. 4. oga drawings with bom & technical details shall be got approved from icf before effecting bulk supply. [ warranty period: 30 months after the date of delivery ] => limited...
38646837 supply of pneumatic impact wrench sq drive: 3 / 4 inch, torque : 2700 nm, operating pressure :6.2 bar, body: aluminium alloy, weight :not more than 3.5, warranty:1 year, model:2146q1max of ingersoll rand or equivalent in dewalt / makita / chicago pneumatic. [ warranty period: 12 months after the date of delivery ] ...
38517957 bids are invited for aluminium alloy 7075 t6510, single extruded bars dia 135.0mm according to astm b 221m as per happ sp ( q3 ) total quantity : 62192...
38511938 bids are invited for aluminium alloy 7075 t6510, single extruded bars dia 135.0mm according to astm b 221m as per happ sp ( q3 ) mse exemption for turnover yes startup total quantity : 248767...
38472543 bids are invited for aluminium alloy sheets aluminium sheet 3 mm , aluminium sheet 0,7983 mm , aluminium sheet pure 1,55 mm total quantity : 500...
38336599 supply of unf al.alloy conduit thread 50mm dia, aluminium alloy conduit ( 50mm dia, wall thickness 2.5mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of s:1285 ( latest ) suitable for electrical wiring, marking and dimensions shall confirm to clause 6 & 7 of is 9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. note as per dy.cmm / g letter no.04 / rb 120 / icf 206 / 707 dt.03.02.2023, eligibility criteria shall be : [ warranty period: 30 months after the date of delivery ] => limited...
38236356 supply of hydraulic scissor lift, aluminum alloy scaffolding mobile tower and various type ladders at ctc complex...
38194964 supply of unf al.alloy conduit thread 50mm dia, aluminium alloy conduit ( 50mm dia, wall thickness 2.5mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of s:1285 ( latest ) suitable for electrical wiring, marking and dimensions shall confirm to clause 6 & 7 of is 9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. note as per dy.cmm / g letter no.04 / rb 120 / icf 206 / 707 dt.03.02.2023, eligibility criteria shall be : [ warranty period: 30 months after the date of delivery ] => limited...
38095125 purchase of rotex make solenold valve with coil for a range centrifugal machine , make : rotex make solenoid valve with coil for a range centrifugal machine model:v1500 (for single action cylinder ) note : please quoted above make only other make not consider , type : 3/2 way pilot operated nc, poppet design, port connection 1/4 bsp mounting suitable for sub base mountingmedia: air operating temp: 80° max operating pressure : 2 10 bar coil voltage : 230 v ac base mountingmedia: air coil protection : ip65 wattage : 6 aluminium alloy hard anodised body, knob type, locable arrangement , type : 5/2 way pilot operated single coil poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, knob type, locable arrangement , type : 5/2 way pilot operated double coil impulse operated poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, pushbutton type...
38057305 purchase of rotex make spare kit , purchase ofrotex make spare kit note : please quoted above make only other make not consider , spare kit for 3/2 way pilot operated nc, poppet design, port connection 1/4 bsp mounting suitable for sub base mountingmedia: air operating temp: 80° max operating pressure : 2 10 bar coil voltage : 230 v ac coil size: i coil protection : ip65 wattage : 6 aluminium alloy hard anodised body, knob type, locable arrangement , spare kit for 5/2 way pilot operated single coil poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, knob type, locable arrangement , spare kit for5/2 way pilot operated double coil impulse operated poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, pushbutton type...
37958895 tender for disposal of scrap materials available at central stores/virudhunagar of virudhunagar edc lot no.01 materials available at central stores/vredc/virudhunagar (one lot of two items only) condemned distn transformer without oil various capacity aluminum winding sl.no make trs.sl no capacity unit qty remarks 1 ngef 2800032721 100/11 kv nos. 17 2 jayashree transformers jt/17 100/11kv 3 vei an/2992/7682 100/11 kv 4 vt 10623 100/11 kv 5 vei an/1806/4129 100/11 kv 6 indotech it 20454 100/11 kv 7 eltra et 035/1634 63/11 kv 8 eltra et 035/1631 63/11 kv 9 spe spe/140 63/11 kv 10 ngef 2800033155 63/11 kv 11 spe spe/136 63/11 kv 12 rel m 5149 63/11 kv 13 indotech it 18715 63/11 kv 14 megdyne 112 a 2767 63/11 kv 15 rel m 9397 63/11 kv 16 eltra et 5203 63/11 kv 17 vt 1759 63/11 kv lot no.02 materials available at central stores/vredc/virudhunagar (one lot of two items only) sl.no name of the materials unit quantity remarks 1 cond van reg no.tn 67 a 5122 make : bajaj tembo ltd no 1 ea 03/23 24 vdr lot no.03 materials available at central stores/vredc/virudhunagar (one lot of two items only) lot no.4 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.5 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.6 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.7 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.8 materials available at central stores/vredc/virudhunagar (one lot of one items only) sl.no name of the materials unit quantity remarks 1 condemned lt ct nos 387 2 condemned metering set of sizes nos 31 3 scrap brass kgs 174 sl.no name of the materials unit quantity remarks 1 cond electro mechanical meter scrap kgs 15,000 sl.no name of the materials unit quantity remarks 1 cond electromechanical meter scrap kgs 15,492 sl.no name of the materials unit quantity remarks 1 cond high quality meter scrap kgs 16,844 sl.no name of the materials unit quantity remarks 1 cond static meter scrap kgs 12,405 sl.no name of the materials unit quantity remarks 1 miscellaneous iron scrap kgs 22,171 ea 03/23 24 vdr lot no.9 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.10 materials available at central stores/vredc/virudhunagar (one lot of one items only) sl.no name of the materials unit quantity remarks 1 ms rail cut bit scrap kgs 14,221 sl.no name of the materials unit quantity remarks 1 scrap gi kgs 2 2 scrap gi pipe & pipe fitting kgs 1 3 cond type writer nos 2 4 scrap breather kgs 105 5 scrap transformer lamination sheet kgs 301 6 cond megger of sizes nos 1 7 cond fire extinguishers nos 1 8 cond monitor nos 3 9 cond computer scrap (kgs) kgs 170 10 cond relay of sizes nos 25 11 cond printer nos 9 12 cond chair nos 1 13 cond ups kgs 31 14 scrap copper cable kgs 6 15 scrap all aluminium alloy kgs 196 16 cond sv/mv lamp fittings nos 8 17 cond cpu nos 3 18 cond sv lamp choke nos 11 19 cond rhone machine nos 1 20 scrap auto parts (kg) kgs 30 21 empty barrel 40/45gl leaky nos 27 22 cond calculator of sizes nos 1 ea 03/23 24 vdr lot no.11 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.12 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.13 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.14 materials available at central stores/vredc/virudhunagar (one lot of one items only) lot no.15 materials available at central stores/vredc/virudhunagar (one lot of one items only) sd/*** chief engineer / distribution trunelveli region sl.no name of the materials unit quantity remarks 1 scrap ms / rts kgs 15,000 sl.no name of the materials unit quantity remarks 1 scrap ms / rts kgs 16,306 sl.no name of the materials unit quantity remarks 1 scrap rsj cut bit kgs 16,522 sl.no name of the materials unit quantity remarks 1 scrap alu aac cut bit kgs 1761 2 scrap alu ingot kgs 1296 3 scrap acsr kgs 3082 4 scrap alu ug cable kgs 1119 5 scrap aaac kgs 132 6 scrap alu trf winding kgs 2403 7 scrap vir/wp wire with aluminium core kgs 315 sl.no name of the materials unit quantity remarks 1 waste paper scrap kgs 632 2 scrap deal wood kgs 609 3 waste straw board scrap kgs 20 4 empty wooden drum 3 to 6 dia nos 84 5 empty steel drum above 6 dia nos 2 ...
37856360 supply of aluminium alloy conduit ( 50mm dia, wall thickness 2.5mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest ) suitable for electrical wiring, marking and dimensions shall confirm to clause 6 & 7 of is 9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. note icf approved sources shall only be considered. [ warranty period: 30 months after the date of delivery ] => limited...
37832670 supply of circular box 3 way aluminium alloy to designation 63400wp condition of is:1285 2002 or grade lm 6 of bs:1490 ( latest ) with thread as per appendix a and dimension to tab 5 of is:2667 88 nominal size dia 25mm. [ warranty period: 30 months after the date of delivery ] => limited...
37830581 renovation works in board room, entrance lobby and staircase areas of admin block i at cpcl, manali refinery. , renovation works in board room , civil work , demolition of brick masonry work in lime or cement mortar (taking all necessary safety precautions) ,manually / by mechanical means forheights 2.28m above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and disposal of unserviceable materials to the designated place within the refinery premises as directed andincluding breaking into pieces, all labor, tools, etc. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge.( refer drawings sheet no : 1 ) , providing, mixing andlaying in position rccm35 with 20mm and down graded coarse aggregates as per is 456:2000 with a minimum cement content of 400kg/cu.m. using 53 grade ordinary portland cement in lintel above door including cost of shuttering,admixtures,labour charges, tools and tackles,providing pockets, openings, recesses, chamfering, wherever requried, vibrating, tamping, curing and rendering if required to give a smooth & even surface, providing neat cement wash, etc. (excluding the cost of reinforcement), etc. all complete as specified,and directed by engineer in charge. , removal of existing wooden flooring taking all necessary safety precautions, manually / by mechanical means including supply of all tools and tackles, propping, underpinning, cleaning and disposal of unserviceable materials to the designated place within the refinery premises as directed andincluding breaking into pieces, all labor, tools, etc. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge.( refer drawings sheet no : 1 ) , providing & layingcement concrete screed using machine trowel of mix 1:1.5:3 (1 cement : 1.5 m sand: 3 coarse aggregates 12.5mm and down graded aggregates) using 53 grade opc inboard room & inclusive of curing/pond curing, brooming with wire brush, finishingetc.all labours, tools and tackles complete as per drawing, specification & as directed by engineer in charge. , dismantling of false ceiling and wall panelling with frame workof any description(taking all necessary safety precautions) for all heights above floor level including hire charges for tools & tackles, providing necessary scaffolding, propping, underpinning, temporary supports etc. ,as per the instruction of engineer in charge, cleaning and stacking, transporting, loading & unloading and handing over of serviceable material like aluminium frames at destined location /cpcl storage yardwithin the refinery area and disposal of unserviceable material atdesignated place within the refinery area as per specification and directions of engineer in charge. ( refer drawings sheet no : 1 ) , dismantling of windows & doorswith frame, shutterschowkhats, architrave, holdfasts grill ,etc. all complete including hire charges for all tools & tackles required for carrying out dismantling,stacking material, transporting, loading & unloading and handing overto scrap yard/stores within refinery premisesas specified and directed by the engineer in charge. ( refer drawings sheet no : 2 ) , providing and laying brick masonry in super structureabove ffl level using cement mortar 1:5 (1 cement:5 coarse sand)for allheightsincluding the cost of materials, labour,tools and tackles, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape and size,embedding the fittings,curing, etc. all complete as per specifications, and as directed by engineer in charge. , providing 15mm thick cement plaster in cement mortar 1:4 (1cement:4 m sand) onbrick masonry, pcc/rcc surfaces including preparation of base, cleaning, chipping, hacking of existing plaster, scaffolding if required, finishing, curingincludingmouldings and providing grooves in plaster, etc. as specifiedfor all depths and heights including labour charges,tools and tackles,material costs etc. as per specifications and asdirected by the engineer in charge. , providing 6mm thick cement plaster in cement mortar 1:3 (1cement:3 m sand by volume) on roof ceilings, concretesurfaces including preparation of base, cleaning, chipping,hacking of existing plaster, packing of electrical works,scaffolding, finishing, curing etc.for all heights complete with all labour charges,material costs,tools and tackles etc.as per specifications and as directed by the engineer in charge. , repair of existing walls & ceiling plasters of varying thickness of 12mm to 20mm including cutting the patch in proper shape, raking out joints, preparing and plastering the surface of the walls and ceilings complete including disposal of rubbish to the designated place within the refinery premises with cement mortar 1:4 (1 cement : 4 fine aggregate). rate inclusive of chipping and scaffolding. all complete as per specifications, and as directed by engineer in charge. , flooring tiles , nylon carpet tile of multi level loop pile type of size 500x500mm with 100% nylon 6 yawn, height of the pile should be 3.5mm, overall thickness of carpet should be 6mm. the pile weight be 680g/sqm. the brand, shade, pattern and colour shouldbe approved by e inc. (refer drawings sheet no: 1) samples to be submitted to eic for approval. , false ceiling , providing and fixing suspended12.5mm gypboard plain panel ceiling including gypserra perimeter channelis fixed along the perimeter of existing wal with the help of hilti hps 1 (6x40) impact anchor, at 600mm centres.gypserra ceiling angleis suspended by fixing it to the gyproc soffit cleat and or gyproc rawl plug 8x45mm creating 1220mm x 1220mm grid.gypserra intermediate channelis fixed to the gypserra ceiiing angle with m6 x 12mm hex bolt & hex nut arrangement or with 2 nos of ø4.2x13 gyproc metal to metal screw. the gypserra ceiling sectionis then fixed to the gypserra intermediate channelwith the help of gyproc connecting clipand in direction perpendicular to the intermediate channel at 457mm c/c. single layer of 12.5mm tapered edge gypboard plain tile (conforming to is 2095 part 1 : 2011) is then screw fixed to ceiling section with 25mm drywall screwsat230mm centres on ceiling section and 150mm at periphery of ceiling.finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound & joint paper tape.the work is to be executed all complete at all different elevations including material costs,labour,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 23 26 ) , supply & fixing of 600x600mm aluminium tile perforated with easy demountable clip in tile with clip in u channel system manufactured out of 0.7mm thick coil coated on a continuous coil coating process on aluminium alloy 3105 with 2.4mm dia perforated 16% openness in 5.5mm pitch with nwt acoustical tissues at the rear side of the tile, self glued to achieve 0.7nrc.the work is to be executed all complete including material costs,labour,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 23 26 ) , providing and fixing linear slat ceiling 80b perforated aluminium panel & v groove ceiling manufactured by m/s hunter douglas india pvt. ltd. of walnut wood colour consisting of panel 80mm x 15 mm deep x 0.5mm thick perforated aluminium panel of 2 mm diameter diagonal patten with 5 mm centre to centre apertures represents 16 % openness with panel length up to 6 mtr, coil coated on a continuous paint line, and shall be stove enamelled in a continuous coil coating process with the approved colour on the exposed side and the reverse side with polyester primer. the work is to be executed all complete including material costs,labour,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 23 26 ) , wall paneling , providing wall panelling on existing brick wall with 25mm x 50 mmx2mm(0.767kg/m) aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps and fixing of 8 mm thick bwp plywood by screwing to the aluminium framework and providing with walnut veneer of greenply/century/archidplyon exposed side and applying with approved quality antitermite chemical solution on concealed surfaces with all complete including material costs,labour costs,tools and tackles etc. all complete as directed by engineer in charge.the shade ,colour,tecture of veneer shall be as approved complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 4 7 ) , providing wall panelling with 5mm thickwhite coloured saint gobain glass pasted to the 8mm thk bwp plywood using silycon sealant and 3m double sided tapeas shown in the drawing which is screwed to 25mm x 50 mmx2mm(0.767kg/m) aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps over the brick wall with approved quality antitermite chemical solution on concealed surfaces. all complete including material costs,labour costs,tools and tackles etc as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer sheet no : 4 7) ( rate to be quoted based on the actual glass sizes to be fixed at site including wasteages ) ( refer drawings sheet no : 4 7 ) , providing & fixing of knauf solutions (armstrong) ‘optra acoustical wall paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class b s1, d1 as per en13501, fabric with an option of colors – husk as per the choice of the architect providing a minimum sound absorption level of 0.90 nrc to be affixed to wall using wall panel impalers supplied by m/s knauf ceiling solutions (armstrong)industries india pvt. ltd and construction adhesives as per the instructions laid down by the manufacturer. ( refer drawings sheet no : 4 7 ) , providing and fixing backing surface for fabric knauf panels over 25mm x 50 mmx 2mm(0.767kg/m)aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps and fixing of 8 mm thick bwp plywood by screwing to the aluminium framework a with approved quality antitermite chemical solution on concealed surfaces with all complete including material costs,labour costs,tools and tackles etc. all complete as directed by engineer in charge. ( refer drawings sheet no : 4 7 ) , providing wall panelling on existing brick wall with 25mm x 50 mmx2mm(0.767kg/m) aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps and fixing europratik louvers or its equvt, walnut woodshade as approved by e in c, over 8 mm thick bwp plywood which is screwing to the aluminium framework with approved quality antitermite chemical solution on concealed surfacesall complete including material costs,labour costs,tools and tackles as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 4 7 ) , door, upvc windows, upvc doors, upvc ventilators , providing and fixing in position fenesta double glazed toughen glass openable windowwalnut wood colour(no. of panels as approved(with clear 5mm thick glass double glazing for sound proofing ),with g.i , member 1.5 mm of white in colour including all fixtures, fastenings, handle with flush lock, epdm gaskets, wool pile etc., making recesses in brick/concrete surfaces and making good the same after fixing complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 1) , providing and fixing in positionupvc doors (electrical room external door ) single leaf lwhite in colour upvc panels of minimum 15mm thickness (doors may be either partly glazed , partly paneled or fully panelled)with upvc stiles, rails,frame and accessories holdfasts, hinges, pull handles on both sides, locking arrangement as per requirementincluding labour charges, material cost, tools and tackles all complete as per specifications & as directed by engineer in charge. , providing and fixing isi marked, 30mm thick bwp flush door shutters of greenply/century/archidplydecorative type, consisting of solid core block board bonded with phenol formaldehyde synthetic resin andwith 4mm overall thickness walnut veneer of greenply/century/archidply facing both sides with 1st class teak wood lipping on all edges. the center part should be removed as mentioned in drawing and should be fixed with 8mm thk bwp plywood with 4mm thk veneer on both sides andproviding 6mm thick teakwood perimeter beading fixed by means of approved quality neoprene based adhesive and nailing @ 300mm max., providing and fixing 125mm long stainless steel butt hinges [for each shutter (vertical spacing not exceeding 600mm) ] including providing wooden filler/sealer, stainless steel lock, door bush, finishing etc . complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , providing and fixing isi marked, overall 30mm thick bwp flush door shutters of greenply/century/archidplydecorative type, consisting of solid core block board bonded with phenol formaldehyde synthetic resin and fixedwith 4mm overall thickness walnut veneer of greenply/century/archidplyon external sideand internal side fixed with prefinished charcoal louvers of europratik or its equivalent, walnut woodshade as approved by e in c,.and fixing 125mm long stainless steel butt hinges(vertical spacing not exceeding 600mm)including providing wooden filler/sealer, stainless steel lock , door bush, finishing etc . complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , providing and fixingsecond class teak wooden frames150mmx60mm,for doors for all heights including all labours, tools, tackles, cutting, shaping, jointing,applying 2 coats of wood primer mixed with approved quality antitermite chemical solution on concealed surfaces, fixing in masonry/rcc by means of 300mm x 25mm x 6mm thick m.s. hold fasts screwed to frame @ 600mm max vertically and grouted with 1:2:4concrete by volume in min. 350mm x 100mmx100mm sized hole made in masonry/96mm long, 12mm dia m.s. dash fastner etc. all complete as dirercted by engineer in charge. , providing and fixingaluminium extruded section body tubular type universal hydraulic door closer of dorma make with double speed adjustment with necessaryaccessories and screws with all labour charges,tools & tackles etc. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge , providing and fixing bright finished cp brass 100mm mortice handle with lock of godrej make model as approved by eic, isi marked with four levers and a pair of polished stainless steel decorative handles (size of handles to match the door size) with necessary screws etc. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge , cabinets , providing & fixing console cabinet tableof size as mentioned in drgs made out of18mm thkbwpplywood with walnut shade veneer of greenply/century/archidply,on external surfaces and 1mm laminate on internal surface with rehal tape of walnut shade and finished with saint gobain 10 mm thickwhite colour glass counter top. the cabinet should be fitted with eco hinges and chromium plated angle. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 21 ) , providing & fixing wall cabinet around tv unit of size as mentioned in drgs made out of18mm thkbwpplywood withwalnut shade veneer of greenply/century/archidply finish exposed surface of wanut shade with openable shuttersand internal surface to be finished with laminate of walnaut shade using butterfly hinges and chromium plated angle. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 5) , special elements , providing and fixing 25mm x 40mml shape stainless steel profile(euro pratik elite section or approved equivalent ) silver finish as edge profile glued with sr fevicol including material costs,labour,tools and tackles ect.all complete as directed by engineer in charge. ( refer drawings sheet no : 12 ) , providing and fixingaluminium ripple fold concealed curtain track with necessary plastic hooks and wheels as required, screwed to the 18mm thk bwp plywood box section which is srewed to the side wall / lintel. the work is to be executed all completeincluding material costs,labour ,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , providing and fixing satin fabric curtains ( should absorb sound and blackout the light ). it should be installed in a ripple fold pattern. the measurement of the curtain is based on the width of the track and the total height is from floor level.the work is to be executed all complete including material costs,labour,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , providingandapplying two coats ofinterior royal emulsion paintwithasian paint or approved equivalent make of any shades/colours asper the specifications and including a priming coat with cement primer of approved brand of the same and appling one coat of wall putty, for roof ceiling/ rafters/walls/wall panelling/ceiling, and drywall partition withnecessaryscaffolding and surface preparation, sand papering, scrapping & removing old loose paint films, filling all holes and depressions, etc., complete as per specification and as directed by engineer in charge.note in case of painting in existing walls entire wall is to be cleaned and putty to be applied before painting. , disassembling the conference table into 2 or more parts as required, shifting to designated location before commencement of dismantling works inside board room, shifting back to board room after completion of board room interior works, reassemblingand fixing of 4mm thk walnut shade veneer of greenply/century/archidply above the existing conference table top with teak wood perimeter beading of 6mm thikness on vertical edge of height 60mm or as req. and finish with pu varnish. all complete including materials, labour costs,tools and tackles etc. all complete as directed by engineer in charge.( theveneer need not to be replaced below the table) , repolishing of conference table vertical support by changing the existing teakwood color to walnut color as directed bt e in c. the set durface shall be finished with melamine matt finish to match the same walnutfinishsimilar toveneer fixed to table top. all complete including materials, labour costs,tools and tackles etc. all complete as directed by engineer in charge , providing and fixing 5mm thickwhite coloured saint gobain glassusing silycon sealant and 3mm double sided tapeon center of the table as mentioned in drawings. all complete including materials, labour costs ,tools and tackles etc. all complete as directed by engineer in charge , preparation of new / old wood surfacesby applying filler coat,staining varnish polish to veneer/ wooden surfaces of shade and colour as approved by e in c and applying one layer spray coat of pu coat( polyurethane coating) semi matt finish including all labour charges ,material charges etc. all complete as directed by engineer in charge , furniture , supply ofgodrej la sede high back chair [conference 17 ] as per following specifications. seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner.plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned backshould be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) armrests: the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio synchro mechanism: the adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• front pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5 position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should be made up of hpdc aluminium black powder coated.4 seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has anadjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene. overall dimensions of chair seat height 44.5 to 54.5 cm. height 114 131.5 cm. width & depth of chair as measured from base width 76.1 cm and depth 66.5 cm , supply ofgodrej la sede visitor chair[ conference 20 ] as per following specifications. seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner.plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 46.5 cm. (w) x 59.5 cm. (d)visitor tubular frame: the tubular frame should be cantilever type and made of ø2.54± 0.03 cm x 0.02 ± 0.016cm thick ss 202 tube. the back should be connected to frame through chrome plated high pressure die case connector piece.overall dimensions of chair seat height 46.2 cm. height 98.2 cm. width & depth of chair as measured from base width 60.9 cm and depth 64.7 cm , supplying, fabricating and placing in position high strength deformedsteel bar reinforcement of grade fe500 for rcc work, straightening,cleaning, decoiling, cutting, bending to required shapes and lengths asper details, binding with contractors own 16 standard wire gauge(swg)black soft annealed binding wire at every intersection, supplying andplacing with proper cover blocks, supports, overlaps, chairs, spacers,lifting hooks etc for all heights & depths etc. all complete as directedby engineer in charge. , manufacturing, transporting, supplying and erecting in position rccprecast elements of nominal mix 1:1.5:3 (1 cement:1.5 m sand: 3 stone aggregates of 20mm and down size graded crushed stone aggregates as per is:456 2000 using ordinary portland cement (opc) 53 grade for all leads, levels, shapes and thicknessincluding all moulds, shuttering and centering, vibrating, tamping,curing, chamfering, wherever required, finishing the top surface withcement mortar 1:3( 1 cement : 3 msand) to give a smooth and evensurface or non skid finish as specified, providing lifitng hooks, metalinserts, making holes pockets, (only m.s. inserts to be measured & paidseperately) transporting to site, erecting, levelling, aligning andfixing in position all complete (excluding cost of reinforcement) andas directed by the engineer in charge. , providing and applying approved epoxy resin of fosroc or approved equivalent for bonding of fresh concrete to old concrete in all types of structures at all depths and heights including cleaning of concretesurfaces, removing of all loose concrete pieces, making rough bychiselling, taking off the skin of concrete, application of epoxy resin system as per manufactures recommendations taking all safety measures,etc.complete as specified and directed by engineer in charge. , repairs to existing rcc beams, columns & slab including chipping and dismantling & removing of loose particles applying cement paste, rakingout joints, applying epoxy resin rakingout joints, applying epoxy resin for bonding fresh cocrete to oldconcerete, filling void portion with concrete 1:1:5:3 concrete(1cement:1.5 m sand :3 stone aggregates 12mm size) making good as same,including formwork, curing, staging, working platforms labours, tool andtackles all complete as per s pecifications and directions of engineer in charge. , entrance lobby and staircase areas , civil work , dismantling of mosaic in staircaselaid in cement mortar (taking all necessary safety precautions)manually / by mechanical means including necessarytools and tackles, propping, underpinning, cleaning the siteand disposal of unserviceable materialatdesignated place inside the refinery premises as per specification and directions of engineer in charge. ( refer drawings sheet no : 1 ) , taking of tile work in floors and skirtinglaid in cement mortar for thickness upto 25mm (taking all necessary safety precautions)manually / by mechanical means including necessarytools and tackles, propping, underpinning, cleaning the siteand disposal of unserviceable materialatdesignated place inside the refinery premises as per specification and directions of engineer in charge. , dismantling of false ceiling and wall panelling with frame workof any description(taking all necessary safety precautions) for all heights above floor level including hire charges for tools & tackles, providing necessary scaffolding, propping, underpinning, temporary supports etc. ,as per the instruction of engineer in charge, cleaning and stacking of serviceable material like aluminium frames at destined location /cpcl storage yardwithin the refinery area and disposal of un serviceable material atdesignated place inside the refinery premises as per specification and directions of engineer in charge. , dismantling of windows & doorswith frame, shutterschowkhats, architrave, holdfasts grill ,etc. all complete including hire charges for all tools & tackles required for carrying out dismantling,stacking material, transporting, loading & unloading and handing overto scrap yard/stores within refinery premisesas specified and directed by the engineer in charge and disposal of unserviceable material atdesignated placeinside the refinery premises.( refer drawings sheet no : 2 ) , dismantling of wooden handrail & ss balustade and making the side plaster surface neat & clean & disposal of unserviceable materialatdesignated place inside the refinery premises as per specification and directions of engineer in charge. , providing, erection & dismantling of scaffolding for all heights: job involves erection of scaffolding at the required locations using 1 1/2 inch dia steel tubular pipes with suitable clamping arrangement ,providing steel gratings, access staircase system at required locations firmly tied on to the scaffolding pipes, removal of the steel gratings & scaffolding materials on completion of the job. the job shall be carried out as per cpcl scaffolding procedure. the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, all consumables and labour to complete the job in all respects, supply & transportation of steel scaffolding materials & steel gratings to the work site etc. complete as per directions and approval of engineer in charge. the payment will be made once irrespective of duration of scaffolding. , repair of existing walls & ceiling plasters of varying thickness of 12mm to 20mm including cutting the patch in proper shape, raking out joints, preparing and plastering the surface of the walls and ceilings complete including disposal of rubbish to the designated place within the refinery premises with cement mortar 1:4 (1 cement : 4 fine aggregate). rate inclusive of chipping and scaffolding. all complete as per specifications, and as directed by engineer in charge. , providing & laying cement concrete screed using machine trowel of mix 1:1.5:3 (1 cement : 1.5 m sand: 3 coarse aggregates 12.5mm and down graded aggregates) using 53 grade opc inboard room & inclusive of curing/pond curing, brooming with wire brush, finishingetc.all labours, tools and tackles complete as per drawing, specification & as directed by engineer in charge. , providing and laying brick masonry in super structureabove ffl level using cement mortar 1:5 (1 cement:5 coarse sand)for allheightsincluding the cost of materials, labour,tools and tackles, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape and size,embedding the fittings,curing, etc. all complete as per specifications, and as directed by engineer in charge. , providing 15mm thick cement plaster in cement mortar 1:4 (1cement:4 m sand) onbrick masonry, pcc/rcc surfaces including preparation of base, cleaning, chipping, hacking of existing plaster, scaffolding if required, finishing, curingincludingmouldings and providing grooves in plaster, etc. as specifiedfor all depths and heights including labour charges,tools and tackles,material costs etc. as per specifications and asdirected by the engineer in charge. , providing 6mm thick cement plaster in cement mortar 1:3 (1cement:3 m sand by volume) on roof ceilings, concretesurfaces including preparation of base, cleaning, chipping,hacking of existing plaster, packing of electrical works,scaffolding, finishing, curing etc.for all heights complete with all labour charges,material costs,tools and tackles etc.as per specifications and as directed by the engineer in charge. , flooring tiles , providing and laying of premium quality glazed vitrified tiles of size 800x800mm / 600x1200mm of kajaria/somany/johnson shade, size as approved by architect or e in c,glossy finish, decorative type of tiles, approved make with bed of 20mm thick cement mortar 1:3 in line and level including cleaning the finished surfaces with oxalic acid including skirting out the joints, flush pointing of joints of tiles with cement paste/grout mixed with colour pigments matching the shade of tiles,4skirting all around as per drawing ,along with material costs ,tools and tackles, labour charges etc.as per specifications, standards and instructions of engineer in charge as per drawing. (refer drawings sheet no: 1) , providing and fixing 18mm thick machine cut, mirror polished, premoulded and pre polished machine cut tanbrown granite for staircase (& lapotra finish for staircase treads only)of approved qualitywith full bull nose edge polishing etc.of required size ofcolour/shade as approved by e in c, laid 20mm thick base cement mortar 1:4 (1 cement:4 m sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including machine polishing to edge to give high gloss finish, providing machine cut opening as per requirement etc., rubbing, curing, moulding & full bull nose edge polishing etc. complete at all levels as directed by engineer in charge.(refer drawings sheet no:1 ) work includes plastering and touching up the side surfaces of waist slab and finishing the surfaces neatly . , false ceiling , providing and fixing suspended12.5mm gypboard plain panel ceiling including gypserra perimeter channelis fixed along the perimeter of existing wall/ partition with the help of hilti hps 1 (6x40) impact anchor, at 600mm centres.gypserra ceiling angleis suspended by fixing it to the gyproc soffit cleat and or gyproc rawl plug 8x45mm creating 1220mm x 1220mm grid.gypserra intermediate channelis fixed to the gypserra ceiiing angle with m6 x 12mm hex bolt & hex nut arrangement or with 2 nos of ø4.2x13 gyproc metal to metal screw. the gypserra ceiling sectionis then fixed to the gypserra intermediate channelwith the help of gyproc connecting clipand in direction perpendicular to the intermediate channel at 457mm c/c. single layer of 12.5mm tapered edge gypboard plain tile (conforming to is 2095 part 1 : 2011) is then screw fixed to ceiling section with 25mm drywall screwsat230mm centres on ceiling section and 150mm at periphery of ceiling.finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound & joint paper tape.the work is to be executed all complete at all different elevations including material costs,labour,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 23 26 ) , providing and fixing of wooden false ceiling above reception counter with 18 mm thick bwp plywood withwalnut veneer of greenply/century/archidply on exposed side which is screwed with wooden framework using country wood of size 50mmx50mm. all complete including material costs,labour costs,tools and tackles etc. all complete as directed by engineer in charge.the shade,colour,texture of veneer shall be as approved complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 23 26 ) , providingand fixing of wooden false ceiling above reception counter with 100mm x 12mm bwp plywood battern with 4mm thk ost and 6mm thk teak wood perimetrebeading on both the ends and screwing it to the 6mm bwp plywood which is screwed with wooden framework using country wood of size 50mmx50mmwith all complete including material costs,labour costs ,tools and tackles etc. all complete as directed by engineer in charge.the shade,colour,tecture of veneer shall be as approved complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. ( refer drawings sheet no : 23 26 ) , wall paneling , providing wall panelling on existing brick wall with 25mm x 50 mm x2mm(0.767kg/m)aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps and fixing of 8 mm thick bwp plywood by screwing to the aluminium framework and providingwalnut veneer of greenply/century/archidplyon exposed side by pasting to the plywood with approved quality antitermite chemical solution on concealed surfaces with all complete including material costs,labour costs,tools and tackles etc. all complete as directed by engineer in charge.the shade,colour,texture of veneer shall be as approved complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 8 11) , providing wall panelling with 5mm thickwhite coloured saint gobain glass pasted to the 8mm thk bwp plywood using silicon sealant and 3m double sided tapeas shown in the drawing which is screwed to aluminion framework made of 25mm x 50 mm x2mm(0.767kg/m)aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps over the brick wall with approved quality antitermite chemical solution on concealed surfaces. all complete including material costs,labour costs,tools and tackles etc. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer sheet no : 4 7) ( rate to be quoted based on the actual glass sizes to be fixed at site including wastages ) (refer drawings sheet no : 8 11) , providing wall panelling behind reception table on existing brick wall with 25mm x 50 mm x2mm(0.767kg/m)aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps and fixing of 100mm x 12mm bwp plywood battens with 4mm thk ost and 4mm thk beading on both the ends and screwing it to the8 mm bwp plywood which is screwed to the aluminium framework with approved quality antitermite chemical solution on concealed surfaces all complete including material costs ,labour costs,tools and tackles etc. all complete as directed by engineer in charge.the shade,colour,texture of veneer shall be as approved complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 8 11) , providing wall panelling near staircase area on existing brick wall with 25mm x 50 mm x2mm(0.767kg/m) aluminum hollow sections at not more than575 mm c/c on either direction with necessary clamps and fixing europratik louvers or its equvt. to 8 mm thick bwp plywood which is screwing to the aluminium framework with approved quality antitermite chemical solution on concealed surfacesall complete including material costs,labour costs,tools and tackles etc. all complete as directed by engineer in charge.the shade,colour,tecture of veneer shall be as approved complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 16 18) , panelling on the jambs of patch fitting glass door using 12mm thk bwp plywood with 4 mm thick veneer of greenply/century/archidply with lipping all as shown in the drawing complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , refurbishing the partition below staircase landing by removing the existing laminate and replacing with new laminate over the existing surface after making the surface level neat & clean & pasting with necessary sr / fevicol. , door, upvc windows, upvc doors, upvc ventilators , providing and fixing in position upvc sliding window of venesta(no. of panels as approved ,with g.i , member 1.5 mmwhite in colour including all fixtures, fastenings, handle with flush lock, epdm gaskets, wool pile etc., making recesses in brick/concrete surfaces and making good the same after fixing complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 1) , providing and fixing in position fixed glazing upvc windows of venesta (with clear 5mm thick glass double glazing), white in colour including all fixtures, fastenings, etc. making recesses in brick/concrete surfaces and making good the same after fixing all complete as per directions of engineer in charge. (refer drawings sheet no : 1) , providing and fixing isi marked,double leaf 30mm thick bwp flush door shutters of greenply/century/archidplydecorative type, consisting of solid core block board bonded with phenol formaldehyde synthetic resin and with 4mm thick veneer of greenply/century/archidply facing both sides with 1st class teak wood lipping on all edges. the center part should be removed as mentioned in drawing and should be fixed with 8mm thk bwp plywood with 4mm thk walnut veneer on both sides andproviding 6mm thick teakwood perimeter beading fixed by means of approved quality neoprene based adhesive and nailing @ 300mm max., providing and fixing 125mm long stainless steel butt hinges [for each shutter (vertical spacing not exceeding 600mm) ] including providing wooden filler/sealer, stainless steel lock, door bush, finishing etc . complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 13) , providing and fixingsecond class teak wooden frames150mmx60mm,for doors for all heights including all labours, tools, tackles, cutting, shaping, jointing,applying 2 coats of wood primer mixed with approved quality antitermite chemical solution on concealed surfaces, fixing in masonry/rcc by means of 300mm x 25mm x 6mm thick m.s. hold fasts screwed to frame @ 600mm max vertically and grouted with 1:2:4concrete by volume in min. 350mm x 100mmx100mm sized hole made in masonry/96mm long, 12mm dia m.s. dash fastner etc. all complete as dirercted by engineer in charge. , providing and fixing frameless glass door of size 1.8m x 2.1m using 10mm thick clear toughened glass with patch and other fittings of dormakaba make including cutting, making holes, cutouts in the glass of required shape and size to accommodate fittings and fixing the fittings in floors, soffits, jambs including necessary screws, fixtures, sealants wherever required and ss cover over patch fittings etc., all complete as per particular specification (refer drawings sheet no : 8 9) , providing and fixing fixed glass partitons on either side of frameless glass door to a height of 2.55m using 10 mm thick toughened glass with ulpt 90/ ulpt 92 patch fittings of dormakaba make at the top and aluminium channel at the bottom. cost to include, cost of glass including making holes, cut outs and applying sealants all complete.(refer drawings sheet no : 8 9) , providing and fixingaluminium extruded section body tubular type universal hydraulic door closer of dormakaba make with double speed adjustment with necessaryaccessories and screws with all labour charges,tools & tackles etc. complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge , providing and fixing bright finished cp brass 100mm mortice handle with lock of godrej make of model as approved by eic,isi marked with four levers and a pair of polished stainless steel decorative handles (size of handles to match the door size) with necessary screws etc.complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge , cabinets , providing & fixingreceptiontable of size 2.43m x 0.60m x 1.00m made out of18mmthk bwp plywood with veneer of greenply/century/archidply finished on exposed surface on shown in drawings with pu coating ( polyurethane) semi matt finish partially and nano white stone partially on exposed sidesand 1mm white laminate inside with rehau tape of walnut shadewith 18mm thk nano whitestone counter top. the cabinet shutters should be fitted butterflyhinges , the drawer channels, keyboard channelsof ebco make with screws and nails complete complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge(refer drawings sheet no : 20) , providing & fixing storage cabinet of size2.10mx0.3m x 3.43m made out of 18mm thkbwpplywood with walnut veneer of greenply/century/archidply finished with pu coating ( polyurethane) semi matt finish. the cabinet shutter should be fitted with butterfly hinges and chromium plated angle.complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. (refer drawings sheet no : 22) , special elements , entrance decorative special table of size 1.50m x 0.45m made out of sshollow box section of size 75x25 mm(304 grade) of required thicknessbend to shape in cnc , welded and polished neatly and thetable top provided with 12mm thick saint gobin white coloured glassas approved by engineer in charge. (refer drawings sheet no : 19) , providing and fixingaluminium ripple fold concealed curtain track with necessary plastic hooks and wheels as required, screwed to the 18mm thk bwp plywood box section which is srewed to the side wall / lintel. the work is to be executed all completeincluding material costs,labour ,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , providing and fixing satin fabric curtains ( should absorb sound and blackout the light ). it should be installed in a ripple fold pattern. the measurement of the curtain is based on the width of the track and the total height is from floor level.the work is to be executed all complete including material costs,labour,tools and tackles complete all as per trade practice and as directed byarchitect/ consultant /engineer in charge. , providing and fixing roller blind with 100% polyester blackout fabric ,colour coated with acrylic and control unit with clutch mechanism,idler ,operating chain,galvanized m.s.bracket with powder coated bracket ,spring steel clamp , extruded aluminum channel powder coated in white load bar,aluminum extruded grooved tube –anodized & covered with matching fabric,fabric roller tube all complete as directed by engineer in charge.the colour and pattern to be decided jointly with eic. (refer sheet no : 18) , providingandapplying two coats ofinterior royal emulsion paintwithasian paint or approved equivalent make of any shades/colours asper the specifications and including a priming coat with cement primer of approved brand of the same and appling one coat of wall putty, for roof ceiling/ rafters/walls/wall panelling/ceiling, and drywall partition withnecessaryscaffolding and surface preparation, sand papering, scrapping & removing old loose paint films, filling all holes and depressions, etc., complete as per specification and as directed by engineer in charge.note in case of painting in existing walls entire wall is to be cleaned and putty to be applied before painting. , supply and fixing of ss handrail by using ss pipe 50mm dia 16 swg 304 grade at top and vertical 40 x 40 squaress pipe (spacing?) 304 grade (m/s. jindal or any other specific make?) and intermediate horizontal pipes are 20mm dia (20 mm x3 nos?)ss 304 grade with necessary base plate and anchor fastners. (refer drawings sheet no : 15) , preparation of new wood surfacesby applying filler coat,staining varnish polish to veneer/ wooden surfaces of shade and colour as approved by e in c and applying one layer spray coat of pu coat( polyurethane coating) semi matt finish including all labour charges ,material charges etc. all complete as directed by engineer in charge , providing and fixing decorative charcoal sheets of size mentioned in drawing of 12mm thickness of euro pratik make or its approved equivalent,fixed &pasted using fevicol srand heatx over 12mm thk plywood which is screwed to the wall in locations as specified by eic ,all complete including material costs,tools and tackles,labour charges etc. (refer drawings sheet no : 16 17 ) , furniture , supply of godrej pisa 2 seater sofa or approved equivalent brand and shade appproved by eic as per following specifications.seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional toplayer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp qltapl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.width (w): 146.0 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm. , supply of godrej pisa 1 seater sofaas per following specifications. seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional toplayer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp qltapl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.width (w): 146.0 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm. , supply of pisa side table as per following specifications. should be a center table glass : it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. width of table= 60.0 cm, depth=60.0 cm, height=35.1 cm.. , supply ofgodrej la sede high back chair[ conference 1 ]as per following specifications. seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner.plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned backshould be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) armrests: the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio synchro mechanism: the adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• front pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5 position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should be made up of hpdc aluminium black powder coated.4 seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has anadjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene. overall dimensions of chair seat height 44.5 to 54.5 cm. height 114 131.5 cm. width & depth of chair as measured from base width 76.1 cm and depth 66.5 cm , board room and lobby modification , electricalworks for entrance lobby , supply of metal glad plug and socket, single phase, neutral and earth (industrial type) , supply, installation, testing and commissioning of single phase 3 pin socket type to connect the 3 tone a/c unit at board room at entrance respectively. , supply of 32 a 1 ph ip 66 protected industrial type socket above falls ceiling on the surface or flush with wall as per the site requirements. , supply, installation, testing and commissioning of 32 dp mcb control box for controlling the a/c 3 tone unit in a suitable enclosure at table top level on the surface or flush with wall as per the site requirements. , supply of sockets , the scope of work includes supply of the below mentioned sockets as per the specifications of this tender and directions of engineer in charge. , supply, erection, testing and commissioning of 1 no. 16a/6a socket outlet controlled by 1 no. 16a switch , supply, erection, testing and commissioning of 1 no. 6a socket controlled by 1 no 6a switch (board socket). , 2 nos 6a malty utility 5 pin sockets controlled by 1 no.6a switch for computer power points long the patrician wall of the cabin or on the wall on surface or flush with surface. , switch boards for controlling light points , one no 6a switch controlling one light point , one no 6 a switch controlling 2 points , one no 6 a switch controlling 3 points , one no 6 a switch controlling 8 points , two way controlled light point switch , installation of conduit , the scope of work includes installation and laying of conduits in concealed or surface mounted for circuit/main/telephone/video conferencing/data wiring with clamps, saddles, pull boxes and all other conduit accessories as per the specifications of this tender and directions of engineer in charge. , installation of 32 mm pvc conduit , installation of 25 mm pvc conduit , installation of 20mm conduit , supply of data wiring , the scope of work includes supply, fixing and connection of modular type of anchor make (roma) or approved equivalent rj 45 computer socket cat 6 with shutter, metal box and cover plate, complete with labour and materials as per direction of the engineer in charge. , cat 6 cabling: , the scope of work includes supply and laying of 4 pair cat 6 type cable in pvc pipe/casing caping with all necessary accessories for computer networking, as per the specifications of this tender and directions of engineer in charge. , only isi marked wires of make finolex/polycab/havells/kei/rpg/v guard shall be used. , telephone systems , the scope of work includes supply and laying of 2 pair,0.5/0.9 mm annealed unarmoured telephone cable laid in already installed pvc conduits with all necessary accessories from the telephone jb to officer’s table, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. , the scope of work includes supply and fixing of telephone rj 11 jack with shutter in gi box along with modular base and cover plate, concealed in wall / partition, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. the make shall be anchor or equivalent. , supply and erection of point wiring material , the scope of work includes supply of concealed/surface point wiring using 660v/1.1kv grade copper conductor pvc insulated frls copper wires (with proper r, y, b colour code), as per the specifications of this tender and directions of engineer in charge. , 3 r of 2.5 sq. mm cu conductor wire (circuit mains) , 3 r of 1.5 sq. mm cu conductor wire (point wiring) , 3 r of 2.5 sq. mm cu conductor wire (6a power sockets) , power point wiring with the following size of wires. , 2 r of 6 sq.mm cu conductor wire with 1r of 2.5 sq. mm cu wires. (for a/c 3 tone unit) , 2 r of 4 sq.mm cu conductor wire with 1r of 2.5 sq. mm cu wires. (for 16 a power plus) , junction boxes. , suitable size junction boxes to terminate power wiring cable, which in turn should be enable to take the pipe along with wires in to the patrician walls and other area where wiring in done in a concealed pattern.size 200mm x 50 mm , supply of electrical fixtures , the scope of work includes supply of following light fixtures including necessary hardware such as clamps, nuts, bolts, screws, nails, suspension rods and materials required for terminations, interconnections, earthing from terminal block/ceiling rose to light fitting, as per specifications of this tender and directions of engineer in charge. , 10 w aura style edge nw (philips make) , 20w 4 feet led batten ww (philips make) , 10 w 2 feet led batten (philips make) , 12w durasternsquare nw , beacon pendent model no. 58074 , 3 watts altra spot tilt ww , electricalworksfor board room , supply of distribution boards , supply of auto sources change over switch to have one source at all time without failure. , fabrication and supply of ats switch of 63a 4p socomec switch with the following: , supply, installation, testing and commissioning of floor power distribution boards with the following incoming and out goings: indicating lamps to indicate which source is in operation. phase indication lamp 3 nos. with control fuses. 1 no. of 63a 4p mcb and 1 nos. of 40a 4p mcb isolators to feed these supply to ac pdb and pdb respectively.these arrangement shall be made in a single enclosure made of 14g ms sheet, with necessary bus bars interconections and cable adotor boxes to enable the incoming and out goings. , fabrication and supply of ats switch of 63a 4p socomec switch with the following: (for ldb) , supply, installation, testing and commissioning of floor lighting distribution boards with the following requirements:indicating lamps to indicate which source is in operation. phase indication lamp 3 nos. with control fuses. these arrangement shall be made in a single enclosure made of 14g ms sheet, with necessary bus bars interconections and cable adotor boxes to enable the incoming and out goings. , pdb i (main): , the scope of work includes supply of pre fabricated, pre wired db’s provided with insulated phase busbars, neutral busbar with shrouds, earth busbar with colour coded interconnecting wires, blank plates, circuit identification tags, double door with ip43 (industrial type) vertical type 4 way tpn mcb db(pdb) consisting of following, , incomer: 63 a fp mccb , outgoings: 8 nos 32 a sp mcbs , to feed power supply to 3 nos. 3 tone a/cs powers at board room and 2 nos 3 tone a/cs at entrance lobby. 3 nos. 32a sp mcbs remains spare. , db shall have top cable adopter box with necessary fixing accessories etc., to enable termination of incoming cable and outgoing wires, and shall be as per is standards and directions of engineer in charge. , pdb ii: , the scope of work includes supply of pre fabricated, pre wired db’s provided with insulated phase busbars, neutral busbar with shrouds, earth busbar with colour coded interconnecting wires, blanking plates, circuit identification tags, double door with ip43 (industrial type) 7 segment 8 way tpn mcb db(pdb) consisting of following: , incomer: 63 a fp mcb , outgoings: , 3 nos 40a dp rccb (100 ma) for phase control, 24 nos 16a/10a sp mcbs to feed the small powers.db shall have top cable adopter box with necessary fixing accessories etc., to enable termination of incoming cable and outgoing wires, and shall be as per is standards and directions of engineer in charge. , ldb i: , the scope of work includes supply of pre fabricated, pre wired db’s provided with insulated phase busbars, neutral busbar with shrouds, earth busbar with colour coded interconnecting wires, blank plates, circuit identification tags, double door with ip43 (industrial type) 7 segment 8 way tpn mcb db(pdb) consisting of following, , incomer: 63 a fp mcb , outgoings: 3 nos 32 a dp rccb (30 ma) for phase control24 nos 10a sp mcbs to feed to lighting circuit. , db shall have top cable adopter box with necessary fixing accessorise etc to enable cable and outgoing wires, and shall be as per is standards and directions of engineer in charge. , supply of metal glad plug and socket, single phase, neutral and earth (industrial type) , supply, installation, testing and commissioning of single phase 3 pin socket type to connect the 3 tone a/c unit at board room at entrance respectively. , supply of 32 a 1 ph ip 66 protected industrial type socket above falls ceiling on the surface or flush with wall as per the site requirements. , supply, installation, testing and commissioning of 32 dp mcb control box for controlling the a/c 3 tone unit in a suitable enclosure at table top level on the surface or flush with wall as per the site requirements. , supply & laying of lt ug cables , the scope of work includes supply, laying, testing and commissioning of ayfy/aywy/ pvc armoured aluminium conductor cables along walls, cable trays including supply and fixing of clamps, nuts, bolts, screws, identification tags at beginning and end each cables. the cables shall be properly dressed. (nb: measurements may change upon site requirements) , supply & erection of 4c x 25 sq.mm aly ug cable (from the existing main panel to pdb i floor main distribution board) , supply & erection of 4c x 16 sq.mm aly ug cable( from the existing main panel to pdb ii) , supply & erection of 4c x 10 sq.mm aly ug cable (from the main floor distribution board to ldb i) , supply & installation of lt cable termination , supply & installation of all materials and termination of the following ywy/ayfy copper flexible lt ug cables using double compression type cadmium plated brass cable glands suitable crimped type cable lugs(copper), cable identification tags and including gland earthing using cu conductor of adequate size. , termination of 4c x 25 sq.mm alu ug cable , termination of 4 c x 16 sq.mm alu ug cable , termination of 4 c x 10sq.mm alu ug cable , supply of sockets , the scope of work includes supply of the below mentioned sockets as per the specifications of this tender and directions of engineer in charge. , supply, erection, testing and commissioning of 1 no. 16a/6a socket outlet controlled by 1 no. 16a switch , supply, erection, testing and commissioning of 1 no. 6a socket controlled by 1 no 6a switch (board socket). , 2 nos 6a malty utility 5 pin sockets controlled by 1 no.6a switch for computer power points long the patrician wall of the cabin or on the wall on surface or flush with surface. , switch boards for controlling light points , one no 6a switch controlling one light point , one no 6 a switch controlling 2 points , one no 6 a switch controlling 3 points , one no 6 a switch controlling 8 points , two way controlled light point switch , installation of conduit , the scope of work includes installation and laying of conduits in concealed or surface mounted for circuit/main/telephone/video conferencing/data wiring with clamps, saddles, pull boxes and all other conduit accessories as per the specifications of this tender and directions of engineer in charge. , installation of 32 mm pvc conduit , installation of 25 mm pvc conduit , installation of 20mm conduit , supply of data wiring , the scope of work includes supply, fixing and connection of modular type of anchor make (roma) or approved equivalent rj 45 computer socket cat 6 with shutter, metal box and cover plate, complete with labour and materials as per direction of the engineer in charge. , cat 6 cabling: , the scope of work includes supply and laying of 4 pair cat 6 type cable in pvc pipe/casing caping with all necessary accessories for computer networking, as per the specifications of this tender and directions of engineer in charge. , only isi marked wires of make finolex/polycab/havells/kei/rpg/v guard shall be used. , telephone systems , the scope of work includes supply and laying of 2 pair,0.5/0.9 mm annealed unarmoured telephone cable laid in already installed pvc conduits with all necessary accessories from the telephone jb to officer’s table, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. , the scope of work includes supply and fixing of telephone rj 11 jack with shutter in gi box along with modular base and cover plate, concealed in wall / partition, all complete with labour and materials, as per the specifications of this tender and directions of engineer in charge. the make shall be anchor or equivalent. , supply and erection of point wiring material , the scope of work includes supply of concealed/surface point wiring using 660v/1.1kv grade copper conductor pvc insulated frls copper wires (with proper r, y, b colour code), as per the specifications of this tender and directions of engineer in charge. , 3 r of 2.5 sq. mm cu conductor wire (circuit mains) , 3 r of 1.5 sq. mm cu conductor wire (point wiring) , 3 r of 2.5 sq. mm cu conductor wire (6a power sockets) , power point wiring with the following size of wires. , 2 r of 6 sq.mm cu conductor wire with 1r of 2.5 sq. mm cu wires. (for a/c 3 tone unit) , 2 r of 4 sq.mm cu conductor wire with 1r of 2.5 sq. mm cu wires. (for 16 a power plus) , junction boxes. , suitable size junction boxes to terminate power wiring cable, which in turn should be enable to take the pipe along with wires in to the patrician walls and other area where wiring in done in a concealed pattern.size 200mm x 50 mm , supply of electrical fixtures , the scope of work includes supply of following light fixtures including necessary hardware such as clamps, nuts, bolts, screws, nails, suspension rods and materials required for terminations, interconnections, earthing from terminal block/ceiling rose to light fitting, as per specifications of this tender and directions of engineer in charge. , rc 380 b led 36w 6500 g6 600x600 , 3 watts altra spot tilt ww , 10 w wiz aura w1 f1 , 55 w /pro glow nxt strip lighting /bp 264 led , 25w cove glow strip light with driver 72 led/mtrs , 2 mtrs 17mm / aluminium profile , supply and associated ac works for lobby , supply of ceiling mounted fresh air fan, low noise fans , fresh air fan, 150 cfm ducted type fitted with grille make:ecoair,, ,equivalent ,, , installation work lowside , installation of 1.84 tr 4 way cassette unit , installation of fresh air fan 150 cfm , supply & installation of copper pipe with insulation with 19 mm thick nitrile rubber insulation & polyshield coating cu piping thickness as per oem standards make: mandev,mexflow,uniflow ,armaflex,kflex , supply and installation of drain pipe with 9 mm thick nitrile rubber insulation make:supreme ,finolex,astral , 32 mm dia , 25 mm dia , supply & installation of interconnecting cable 4c x 2.5 sqmm make :lapp,beldon,polycab,finolex , outdoor unit stand , nitrogen pressure testing, vaccumissing etc , bird/insect screen mesh of ss, ss cowl @ 45 deg , air transfer grilles 400 mm x 100 mm make:cosmic,airmaster,systemaire , supply of cassette ac for lobby , supply of 4 way cassette unit , 1.84 tr, smart featured 4 way cassette unit, 5 star, inverter model, twin rotary compressor, 5 years warranty on compressor, 5 years warranty on pcb, 5 year warranty on outdoor casing only, lcd wireless remote controller, cooling only model, capable of working with r32 refrigerant, 100% copper model, indoor unit air quantity @ high speed 1350 cmh, unit shall be capable of accessing through mobile app for easy operation. additional protective corrosive resistance coating for both indoor & outdoorheat transfer coils, pcb etc make: panasonic/daikin/mitsubishi electric/toshiba , supply & associated ac works board room , supply of ceiling mounted fresh air fan, low noise fans , fresh air fan, 275 cfm ducted type fitted with grille make:ecoair,,,equivalent. , installation work lowside , installation of 3 tr 4 way cassette unit , installation of fresh air fan 275 cfm , supply & installation of copper pipe with insulation with 19 mm thick nitrile rubber insulation & polyshield coating make:mandev,,mexflow,,uniflow , supply and installation of drain pipe with 9 mm thick nitrile rubber insulation make:armaflex,kflex , 32 mm dia make:supreme,,finolex,,astral , 25 mm dia , supply & installation of interconnecting cable 4c x 2.5 sqmm , outdoor unit stand make:lapp,beldon,,,polycab,,,finolex. , nitrogen pressure testing, vaccumissing etc , bird/insect screen mesh of ss, ss cowl @ 45 deg , air transfer grilles 400 mm x 100 mm make:cosmic,,,airmaster,systemaire. , supply of cassette ac for board room , supply of 4 way cassette unit , 3.0 tr, smart featured 4 way cassette unit, 4 star, inverter twin rotary compressor, 5 years warranty on compressor, 5 years warranty on pcb, 5 year warranty on outdoor casing only, lcd wireless remote controller, cooling only model, capable of working with r32 refrigerant, 100% copper model, indoor unit air quantity @ high speed 2200 cmh, unit shall be capable of accessing through mobile app for easy operation. additional protective corrosive resistance coating for both indoor & outdoorheat transfer coils, pcb etc => limited...
37809369 disposal of scrap available at tedc / metro / trichy , lot 1 1opgw conductor scrap104 kg, 2light fittings scrap555 kg, 3 condemned lt ct coil1 no., 4. condemned megger of sizes 4 no., 5.condemned cmri meter11 nos., 6 all aluminium scrap ( including aac scrap ) 681 kg, 7 acsrscrap10672 kg, 8 scrap aluminum ug cable 6465 kg 9 damaged aluminium winding coil with oil insulation paper scrap ( oil soaked ) 11102 kg, 10 condemnedrelay of all sizes63 nos., 11. copper cable scrap 25 kg , 12 scrap pvc cable scrap 1230kg, 13 all aluminium alloy scrap200 kg. , lot 2 1 m.s. scrap ( misc ) 39377 kg., 2 scrap waste papar6914 kg, 3 tools & plants scrap25 kg, 4 teak wood scrap31 kg, 5 scrap cast iron510 kg, 6 condemned tong tester1 no., 7 condemned volt meter2 no., 8 condemned earth tester1 no., 9 condemned 7.50mtr twin mould form boxes with out cotter pin 98nos available at psc yard thiruvarambur, 10 condemned 8.0mtr twin mould form boxes with out cotter 13 nos available at psc yard thiruvarambur , lot 3. 1 msrail pole cut bit scrap 8574 kg , 2 rs. joist cut bitsscrap 12030 kg 3 condemned type writer machine ( with cover ) 2 nos., 4 condemned fire extinguishers various size39 nos., 5 condemned exhaust fan motor 4 nos., 6 condemned chain pully block of size 1 no., 7 condemned steel drum 3 6 feet dia9 nos., 8 auto parts scrap3 kg., 9 empty wooden drum up to 3feet dia1 no., 10 empty wooden drum3feet 6feet dia250 nos., 11 empty oil barrel 40 / 45gl cap leaky20 nos., , lot 4.1 ms / rts grills scrap36491 kg, 2 condemned computer moniter with cpu 2 nos., 3 condemned cpu 1no., 4 scrap gi / ms tower angle 1986 kg, 5 condemned battery charger4 nos., 6 condemned choke 20 / 40w various size37 nos., 7 condemned s.v. / m.v. choke26 nos. , lot 5. 1 brass scrap ( misc ) 606 kg, 2 transformer lamination sheet scrap 1033 kg, 3 condemned energy meter scrap ( mech ) 5699 kg, 4 condemned fan w / o regulator5 nos., 5 condemnedhq meter scrap 9546 kg, 6 condemned static meter scrap10291 kg, 7 scrap hand held device 126 nos., 8 condemned celling fan with regulator5 nos. , lot 6. ccondemned copper wood distribution transformers of various capacity without oil, bushing& rod as is were is condition 22 nos.1.50 kva / 11 kv 5 nos., 2.65 kva / 11 kv 1 no. 3.75 kva / 11 kv 3 nos., 3.100 kva / 11 kv 5 nos., 4.150 kva / 11 kv 1 no., 5.50 kva / 22 kv 4 nos., 6.100 kva / 22 kv 3 nos., the above transformers sl.no, &make given of tender specification.condemned released 110 kv current transformer of vairous size with out oil 13nos available atprattiyur 230 kv ss / trichy , lot 7.1 lead scrap 63 kg, 2 condemned ups battery4 nos, 3 condemned auto mobile battery1 no., 4 condemned station battery1620 nos. , lot 8.condemned jeeptn45 k3821 model 1998make mahindra & mahindra, with stepney and r.c.book 1no. , lot 9.1 condemned loory 5ton cap ng 3710model 1979 make tata benzes, with stepney and r.c.book 1 no...
37794851 purchase of rotex make solenold valve with coil for a range centrifugal machine , make : rotex make solenoid valve with coil for a range centrifugal machine model:v1500 (for single action cylinder ) note : please quoted above make only other make not consider , type : 3/2 way pilot operated nc, poppet design, port connection 1/4 bsp mounting suitable for sub base mountingmedia: air operating temp: 80° max operating pressure : 2 10 bar coil voltage : 230 v ac base mountingmedia: air coil protection : ip65 wattage : 6 aluminium alloy hard anodised body, knob type, locable arrangement , type : 5/2 way pilot operated single coil poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, knob type, locable arrangement , type : 5/2 way pilot operated double coil impulse operated poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, pushbutton type...
37736198 purchase of rotex make spare kit , purchase ofrotex make spare kit note : please quoted above make only other make not consider , spare kit for 3/2 way pilot operated nc, poppet design, port connection 1/4 bsp mounting suitable for sub base mountingmedia: air operating temp: 80° max operating pressure : 2 10 bar coil voltage : 230 v ac coil size: i coil protection : ip65 wattage : 6 aluminium alloy hard anodised body, knob type, locable arrangement , spare kit for 5/2 way pilot operated single coil poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, knob type, locable arrangement , spare kit for5/2 way pilot operated double coil impulse operated poppet type design 1/4 bsp port connection suitable for sub base mountingmedia: air 230v ac coil ,aluminium alloy hard anodised body, pushbutton type...
37701013 aluminum and ms sheets and angles , ms and aluminium items (as per nit and technical specifaction) , roofing sheet; 4000mm x 1000 x 0.5mm thick /12 feet x 4 feet x 0.5 mm thick. aluminium zinc alloy metallic coated steel sheet as per is 15965 , ms square hollow section (shs) erw tube:50mmx50mmx3mm wall thick, 6mtr long as per is:4923. , m.s angle 40x40x5mm 20 feet length , wrought aluminium and aluminium alloy sheet 3 mm thickness, as per is:737....
37685005 supply of st030240166 : automatic swivelling adjustable sprinkler model es 65pc ,nozzle size:14mm, inclination 40 degree, connection size: 2 1/2 inch bsp female thread ,each sprinkler will be with 2 1/2 inch ball valve & 65mm nipple (hexagonal) material of construction: nozzle ss 316; body die cast aluminium alloy confirming to is:617; blade cast steel; connection piece ss 304; hexagonal nipple and ball valve: c.i. ball : ss.....
37625614 supply of circular box 3 way aluminium alloy to designation 63400wp condition of is:1285 2002 or grade lm 6 of bs:1490 ( latest ) with thread as per appendix a and dimension to tab 5 of is:2667 88 nominal size dia 25mm. [ warranty period: 30 months after the date of delivery ] => limited...
37601727 supply of hydraulic scissor lift, aluminum alloy scaffolding mobile tower and various type ladders at ctc complex supply of ladders , supply of ladders , supply of hydraulic scissor lift movable capacity 500 kgs. platform size (mm) 2000x1200 platform chequered plate power source 240v ac, 50 hz. external source to be supplied type movable by manual motor 3 hp sharp height 25 feet. , aluminum alloy scaffolding mobile tower (double platform) length – 2 mtr x width – 1 mtr, height 8 mtr. , ‘a’ type ladder – 16 feet , ‘a’ type ladder – 10 feet , ‘a’ type ladder – 6 feet...
37584687 bids are invited for ( a ) cb 8455 000674 title emb khaki dsc nos 11647 ( b ) cn knd / niv / cl2 / 114 tin mess alluminium alloy nos 13751...
37444442 supply of circular box 3 way aluminium alloy to designation 63400wp condition of is:1285 2002 or grade lm 6 of bs:1490 ( latest ) with thread as per appendix a and dimension to tab 5 of is:2667 88 nominal size dia 25mm. [ warranty period: 30 months after the date of delivery ] => limited...
37443976 supply of wall support extension ladder, aluminium alloy wall support extn ladder close ht 24 feet extended ht 45 feet made of high tensile aluminium alloy c section 66 x 32 x 3.16 mm thickness of ohe 30 grade t6 temper of hindalco make steel made of no slip al. alloy corrugated flutted pipe of 28 x 3mm dia steps to be riveted at top 305mm interval extendable another locking rubber shoes at the bottom safety top hooks safety hand rails and addl ms guide pipe mixed inside the ladder at 1 mtr interval for stability of ladder [ warranty period: 30 months after the date of delivery ] => limited...
37344985 bids are invited for title emb khaki dsc, tin mess alluminium alloy total quantity : 25398...
37331957 bids are invited for aluminium alloy 7075 t6510, single extruded bars dia 135.0mm according to astm b 221m as per happ sp (q3) mse total quantity : 9550...
37297115 supply and installation of smart door lock for executive chamber having following specifications: 5 way unlocking using finger print, passcode, bluetooth mobile app, rfid access card and emergency key, upto 50 finger print, access sharing features two layer authentication, stainless steel ( 5 ) with wrong password alert. low battery alert via mobile app, material: aluminium, alloy steel, control method: voice, style: black; dimension: 34.l x 19. l x 12.2 cm approx. installation with standard accessories. make: schlage or qubo essential or wyze or kwikset or ultraloq. [ warranty period: 30 months after the date of delivery ] => limited...
37241017 nit for disposal of scrap materials available at cs / gedc / gobi. , lot no .1 ( lot of one item ) 1.condemneddistributiontransformervarious capacityw / ooil 13 nos ( copper ) a ) 100kva / 11kv / 433v 2 nos1 ) t&s 5884 2 ) apex t028 / 1259 b ) 63kva / 22kv / 433v 7nos 1 ) danke dp / 243 / 12 2 ) danya 1333 3 ) rel m43524 ) electromech 3156 5 ) ece c5568 / 81 6 ) vigneswara 22957 ) ece c5564 / 81c ) 100kva / 22kv / 433v 3 nos 1 ) iht 6054 2 ) apex t055 / 4147 3 ) tamilnadu 1716 ( tank burst ) d ) 200kva / 22kv / 433v 1no 1 ) je 30991 , lot no .2 ( lot of one item ) 1.condemneddistributiontransformer various capacityw / o oil 10 nos ( aluminium ) a ) 63kva / 11kv / 433v 6nos 1 ) vigneswara 3337 2 ) indo tech it187703 ) indo apex it 10690 4 ) indo apex it 5918 5 ) hindusthan 3133 6 ) spec st 13168 b ) 100kva / 11kv / 433v 4nos1 ) apex t327 17841 2 ) kavika 03801541 3 ) kavika 03801155 4 ) vei an / 1282 / 3249 , lot no .3 ( lot o f twelveitems ) 1 .scrap brass 35kgs 2. scrap transformer lamination sheet 118 kgs 3. cond energy meter scrap ( em ) 4388 kgs 4. cond hq meter scrap 3957 kgs 5. cond cmri meter 1no 6. cond burnt static meter 4250 kgs 7.cond pedestal fan 1no 8. cond relay of sizes 1no 9. cond wall clock 2 nos 10. cond ct coil 3nos 11. cond telephone scrap of sizes 1no 12. cond phase squency meter of sizes 1no , lot no.4 ( lot of fiveitems ) 1. scrap alu incl aac cutbits 552 kgs 2. scrap acsr 1757 kgs 3. scrap aaac 939 kgs 4. scrap alu trf winding 188 kgs 5. scrap all aluminium alloy 2 kgs , lot no .5 ( lot of nineitems ) 1. scrap rail cut bits 919 kgs 2. scrap miscellaneous iron 2841 kgs 3. scrap ms / rts 5199 kgs 4. scrap gi 6 kgs 5. scrap t&p 15 kgs 6. scrap rsj cut bit 655 kgs 7. cond fire extinguishers 11 nos 8. scrap auto parts ( kg ) 4 kgs 9. ms barrel 40 / 45 gln ( leaky ) 82 nos , lot no .6 ( lot of four items ) 1. scrap waste paper 3404 kgs 2. scrap waste straw board 74 kgs 3. scrap teakwood 1 kg 4. empty wooden drum 3 to 6 dia 150 nos , lot no .7 ( lot of four items ) 1. scrap lead sealwith sealing wire 567 kgs 2. scrap battery / storage cell 602 nos 3. cond automobile battery 2 nos 4. cond battery 12v 88ah 4 nos...
37225955 bids are invited for black dye for black anodising of aluminium alloy components, as per specification is: 1868(latest iss (q3) mse total quantity : 15...
37177995 bids are invited for aluminium alloy rod dia 80mm to specn. no: dtd 5124 or spec. no: astm b221m grade 7075 t 6510. (q3) mse total quantity : 1076...
37177994 bids are invited for aluminium alloy rod dia 50mm to specn. no: dtd 5124 or spec. no: astm b221m grade 7075 t 6510. (q3) mse total quantity : 105...
37159843 supply of led flame proof light fitting 20 w generally conforming to iec 60079 1:2007 and shall also meet the following technical requirements: 1.material : cast aluminium alloy lm6 2.flame proof:ex d zone 1 &2 , gas group iia & ii b as per is / iec 60079 1:2007 . 3.weather proof : ip / 65 as per is / iec 60529:2001. 4.operating voltage : 110 v dc 5.finish : light grey shade 631 / is 5 ( epoxy powder coated ) 6.mounting gasket : neoprene 7.earthing : 1 no. internal & 2 nos external with m6 tapped screws. 8.glass : heat resistant toughned type a flat glass. 9.the fitting shall be supplied along with suitable brass cable entry gland and dummy plug with strap suspension 10.the light fitting shall be supplied along with adaptor bracket ( mild steel powder coated matching to the light fitting finish ) suitable for wall mounting type. 11.the overall dimensions of the fitting ( including adaptor bracket ) shall not exceed 330 mm ( h ) x 205 mm ( d ) . note : 1. acceptable makes : m / s voltech manufacturing company ltd., m / s baliga lighting equipments ltd., & m / s scg exd tech pvt.ltd., 2. oems or their authourised dealers shall only be considered. 3. necessary test reports and test certificates from cmri shall be submitted for validation if required. 4. oga drawings with bom & technical details shall be got approved from icf before effecting bulk supply. [ warranty period: 30 months after the date of delivery ] => limited...
37055899 bids are invited for aluminium alloy 7075 t6510, single extruded bars dia 135.0mm according to astm b 221m as per happ sp ( q3 ) mse total quantity : 286010...
36819829 bids are invited for wrought aluminium and aluminium alloys sheet and strip ( general engineering purposes ) is:737 ( q3 ) mse total quantity : 5...
36712097 nit for disposal of scrap materials available at cs/medc/mettur. nit for disposal of scrap materials available at cs/medc/mettur , lot no .1(lot of one item)1.scrap miscellaneous iron 52926 kgs. , lot no .2(lot of three items)1. scrap teakwood 136 kgs. 2.empty wooden drum 3 to 6 dia 221 nos. 3.scrap waste paper 2600 kgs. , lot no .3(lot o f four items) 1 .ms barrel 40/45 gln (leaky) 50 nos. 2.ms barrel 40/45 gln (sh) 510 nos. 3.cond metering set of various ratio (11 kv 8 nos.22 kv 96 nos.)without oil 104 nos. make sl.no. ascott3938,techno809 ,ascott 3325, crel 119680 crompton89104, ascott 3856,techno ct/pt 854, crel 119845, elcont 22971,crel 121242, crel 124057,crel 124051, crel124039,crel124070,crel124050,crel122449,crel114518,crel122456, crel122405,crel124045,crel118304,crel124054,ascott118,ascott3016, ascott2398,ascott2062,ascott 3018,ascott2650,ascott2651,ascott3112, ascott2597,ascott2399,vijay092,niesan755,elcont22971c 35,techno ct/pt 960 crel119212,rel 121322,crel124078,crel124063,crel124266,crel124261 crel122481,crel124163,crel117888,crel119231,crel124211,crel122484 crel118839,crel124265,crel122472,crel124207,crel118846,crel118835 crel124246,crel223455,crel124245,crel122469,crel122470,crel124243 crel118326,crel124244,crel124071,ascott223581,ascott 228698,ascott 2199 elcont 2297/b 35,elcont2297/b 34 ,elco2297/b 32,elcont 2297/v 33,crel 118341 crel 121302,crel 124181,crel 117902,crel 117897,crel 117906,crel 118339 crel 118342,crel 124177,crel 119243,crel 124182,crel 124267,crel 118338 crel 124272,crel 124176,crel 121308,crel 119250,crel 117901,crel 122603 crel 118343,crel 121306,crel 124090,ascott 2260,ascott 2962,ascott 2440 ascott2433,ascott 2966,ascott 2228,ascott 2675,elcont 2272/12,elcont 2272/11 elcont2272/7,elcont 22971&elcont 2297/a 73 4.scrap auto parts (kg) 7 kg , lot no .4(lot offour items)1.scrap gun metal 18 kgs. 2.scrap ms/rts 4499 kgs. 3.emtpy steel drum above 6 dia 1 no. 4.scrap breather 46 kgs. , lot no .5(lot of sixitems) 1 .scrap brass 706 kgs. 2.scrap transformer lamination sheet 5499 kgs. 3.scrap copper brass mixed 66 kgs. 4.cond fire extinguishers 2 nos. 5.scrap all aluminium alloy 207 kgs. 6.cond ct coil 184 nos. , lot no .6(lot of one item)1 .cond energy meter scrap (em) 7532 kgs. , lot no .7(lot of three items) 1 .scrap burnt meter/hq 25186 kgs. 2.scrap 3phase hq meter 17 nos. 3.scrap single phase hq meter 155 nos. , lot no .8 (lot of two items) 1 .cond burnt static meter 21419 kgs. 2.scrap 3phase static meter 249 nos , lot no .9(lot ofeight items)1. scrap alu incl aac cutbits 142 kgs 2.scrap aaac 615 kgs 3.scrap alu trf winding 575 kgs 4.cond relay of sizes 14 nos 5.cond printer 1 no. 6.cond water filter 1 no. 7.scrap copper cable 80 kgs 8.scrap acsr 2888 kgs , lot no .1 0 (lot of one item)1 .scrap battery/storage cell 133 nos...
36584852 supply of coupler aluminium alloy dia 50mm, 50mm dia aluminium alloy coupler to is:1285 ( latest ) with designation 63400 condition t6 ( new ) of table 2, with threads as per table 1 of i s 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechnical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, cl ause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimensions to is:14768 part 2 ( latest ) .. [ warranty period: 30 months after the date of delivery ] => limited...
36428913 auction sale of unused tool items (more details in the annexure a) raw materials copper (more details in the annexure b) raw materials aluminium alloy (more details in the annexure c) raw materials aluminium bronze (more details in the annexure d) raw materials brass (more details in the annexure e) raw materials glaze board graphite plastic (more details in the annexure f) raw materials kovar astm (more details in the annexure g) raw materials magnesium bronze (more details in the annexure h) raw materials mdn or ams (more details in the annexure i) raw materials peek (more details in the annexure j) raw materials phosphor bronze (more details in the annexure k) raw materials poly carbonate (more details in the annexure l) raw materials ptfe astm (more details in the annexure m) raw materials silicon steel (more details in the annexure n) raw materials steel (more details in the annexure o) raw materials teflon (more details in the annexure p) raw materials ti alloy (more details in the annexure q) raw materials nylon moulding (more details in the annexure r) ...